I am new to swift development, and it's possible that I'm missing something fundamental/obvious. If so, I apologize in advance. My team is developing an application for iPadOS using SwiftUI, and I'm trying to accomplish something similar to what the original inquirer is asking for in this thread: https://developer.apple.com/forums/thread/725152. The only difference is that I'm trying to use a PIV smart card to achieve authentication to a server rather than digitally sign a document. Unfortunately, I'm getting stuck when attempting to run the list() function provided in the accepted answer to the post mentioned above. When attempting to call SecItemCopyMatching(), I'm getting a -34018 missing entitlement error. I've attempted to add the com.apple.token to my app's keychain-access-groups entitlements, but this does not resolve the issue. I have checked the entitlements in my built app, per the recommendation in the troubleshooting guide here: https://developer.apple.com/forums/thread/114456. The entitlement for com.apple.token is indeed present in the plist. Based on other documentation I've read, however, it seems that the explicit declaration of com.apple.token should not even be required in the entitlements. Is there something obvious that I'm missing here that would prevent my app from accessing the token access group?

Has anyone here encountered this? It's driving me crazy. It appears on launch. App Sandbox is enabled. The proper entitlement is selected (com.apple.security.files.user-selected.read-write) I believe this is causing an issue with app functionality for users on different machines. There is zero documentation across the internet on this problem. I am on macOS 26 beta. This error appears in both Xcode and Xcode-beta. Please help! Thank you, Logan

I am developing a sample authorization plugin to sync the user’s local password to the network password. During the process, I prompt the user to enter both their old and new passwords in custom plugin. After the user enters the information, I use the following code to sync the passwords: try record.changePassword(oldPssword, toPassword: newPassword) However, I have noticed that this is clearing all saved keychain information, such as web passwords and certificates. Is it expected behavior for record.changePassword to clear previously stored keychain data? If so, how can I overcome this issue and ensure the keychain information is preserved while syncing the password? Thank you for your help!

Hello, We are working on integrating app integrity verification into our service application, following Apple's App Attest and DeviceCheck guide. Our server issues a challenge to the client, which then sends the challenge, attestation, and keyId in CBOR format to Apple's App Attest server for verification. However, we are unable to reach both https://attest.apple.com and https://attest.development.apple.com due to network issues. These attempts have been made from both our internal corporate network and mobile hotspot environments. Despite adjusting DNS settings and other configurations, the issue persists. Are there alternative methods or solutions to address this problem? Any recommended network configurations or guidelines to successfully connect to Apple's App Attest servers would be greatly appreciated. Thank you.

I'm working on a Password Manager app that integrates with the AutoFill Credential Provider to provide stored passwords and OTPs to the user within Safari and other apps. Password AutoFill works perfectly. I'm unable to get iOS to register that the app supports OTPs though. I've followed the Apple documentation here: https://developer.apple.com/documentation/authenticationservices/providing-one-time-passcodes-to-autofill and added "ProvidesOneTimeCodes" to the AutoFill extension's Info.plist, but iOS just doesn't seem to notice the OTP support. <key>ASCredentialProviderExtensionCapabilities</key> <dict> <key>ProvidesOneTimeCodes</key> <true/> <key>ProvidesPasswords</key> <true/> </dict> Any help would be greatly appreicated!

We are experiencing a significant issue with macOS security alerts that began on July 9th, at approximately 4:40 AM UTC. This alert is incorrectly identifying output files from our snippet tests as malware, causing these files to be blocked and moved to the Trash. This is completely disrupting our automated testing workflows. Issue Description: Alert: We are seeing the "Malware Blocked and Moved to Trash" popup window. Affected Files: The security alert triggers when attempting to execute .par files generated as outputs from our snippet tests. These .par files are unique to each individual test run; they are not a single, static tool. System-Wide Impact: This issue is impacting multiple macOS hosts across our testing infrastructure. Timeline: The issue began abruptly on July 9th, at approximately 4:40 AM UTC. Before that time, our tests were functioning correctly. macOS Versions: The problem is occurring on hosts running both macOS 14.x and 15.x. Experimental Host: Even after upgrading an experimental host to macOS 15.6 beta 2, the issue persisted. Local execution: The issue can be reproduced locally. Observations: The security system is consistently flagging these snippet test output files as malware. Since each test generates a new .par file, and this issue is impacting all generated files, the root cause doesn't appear to be specific to the code within the .par files themselves. This issue is impacting all the snippet tests, making us believe that the root cause is not related to our code. The sudden and widespread nature of the issue strongly suggests a change in a security database or rule, rather than a change in our testing code. Questions: Could a recent update to the XProtect database be the cause of this false positive? Are there any known issues or recent changes in macOS security mechanisms that could cause this kind of widespread and sudden impact? What is the recommended way to diagnose and resolve this kind of false positive? We appreciate any guidance or assistance you can provide. Thank you.

I had the following code in a program that I used to encrypt some important files. I haven't run it in a few years. It used to work, and now it seems the password is mysteriously gone from my Keychain! The return value is now errSecItemNotFound. I'm upset with myself for not backing up the key/password somewhere else. Is there anywhere this could be hiding? Did Apple move it somewhere? I know they created this "Passwords" app in recent years, but I don't see anything in there with the "account" string I used. I run the app from Xcode, so maybe it is in the "container" data somewhere? I do see keychain files under ~/Library. Maybe there is a way to look through old Time Machine backups. Ug. So stressful. Just looking for pointers on where the data might be, and why it might have disappeared. Unfortunately it was not a "guessable" password, it was a generated 256 bit key, base64 encoded. Perhaps I could crack that with brute force if I'm determined enough... public static func queryGenericPasswordAsString(account: String) throws -> String { let query: [String: Any] = [kSecClass as String: kSecClassGenericPassword, kSecMatchLimit as String: kSecMatchLimitOne, kSecAttrAccount as String: account, kSecReturnAttributes as String: true, kSecReturnData as String: true] var item: CFTypeRef? let status = SecItemCopyMatching(query as CFDictionary, &item) guard status != errSecItemNotFound else { throw KeychainError.noPassword } ... }

I keep getting invalid_client, here is a test login: https://www.bella-booking.ch/_get_incl/test_apple_login.cfm Any help appreciated. NOTE: Everey other error, like wrong reroute or wrong client id, a different error will be sent frpm apple, after I checked all and crosschecked with jwt.io, it keep getting invalid_client. Any clue? If the response is correct, the token should be displayed on the page. Thx

I am developing an Authorisation Plugin which talks to Launch daemons over XPC. Above is working neat, now I have to decide on how to get it installed on a machine. Installation requires. Plugin Installation Launch Daemon Installation Both require Moving binary and text (.plist) file into privileged system managed directory. Firing install/load commands as root (sudo). I have referred this post BSD Privilege Escalation on macOS, but I am still not clear how to approach this. Q: My requirement is: I can use .pkg builder and install via script, however I have some initialisation task that needs to be performed. User will enter some details talk to a remote server and get some keys, all goes well restarts the system and my authorisation plugin will welcome him and get him started. If I cannot perform initialisation I will have to do it post restart on login screen which I want to avoid if possible. I tried unconventional way of using AppleScript from a SwiftUI application to run privileged commands, I am fine if it prompts for admin credentials, but it did not work. I don't want that I do something and when approving it from Apple it gets rejected. Basically, how can I provide some GUI to do initialisation during installation or may be an app which helps in this. Q: Please also guide if I am doing elevated actions, how will it affect app distribution mechanism. In Read Me for EvenBetterAuthorizationSample I read it does. Thanks.

Hi, I am using CryptoKit in my app. I am getting an error sometimes with some users. I log the description to Firebase but I am not sure what is it exactly about.  CryptoKit.CryptoKitError error 2  CryptoKit.CryptoKitError error 3 I receive both of these errors. I also save debug prints to a log file and let users share them with me. Logs are line-by-line encrypted but after getting these errors in the app also decryption of log files doesn't work and it throws these errors too. I couldn't reproduce the same error by myself, and I can't reach the user's logs so I am a little blind about what triggers this. It would be helpful to understand what these errors mean. Thanks

I want iOS device identifier for a framework that is used in multiple vendor's apps. I'm developing a framework to control a peripheral. The framework has to send unique information to register the device with the peripheral. My naive idea was to use IdentifierForVendor. But this API provides the device identifier for the same vendor's apps, not the framework. (The framework will be used by multiple vendors.) Is there a usable device identifier for the framework, regardless of app vendor? Please tell me any solution.

I have a custom NSWindow that I want to exclude from screen capture by setting its sharing state to kCGWindowSharingStateSharingNone. The goal is to prevent this window from appearing in the content captured by ScreenCaptureKit. [window setSharingType:NSWindowSharingType::NSWindowSharingNone]; However, on macOS 15.4+ (Sequoia), the window is still captured by ScreenCaptureKit and appears in the shared content. Does anyone know if kCGWindowSharingStateSharingNone is still effective with ScreenCaptureKit on macOS 15.4 and later?

First, I do not publish my application to the AppStore, but I need to customize a sandbox environment. It seems that sandbox-exec cannot configure entitlements, so I have used some other APIs, such as sandbox_compile_entitlements and sandbox_apply_container. When encountering the entitlement "com.apple.security.files.user-selected.read-only", I am unsure how to correctly write sandbox profile to implement this. Can anyone help me?

I am developing a macOS application (targeting macOS 13 and later) that is non-sandboxed and needs to install and trust a root certificate by adding it to the System keychain programmatically. I’m fine with prompting the user for admin privileges or password, if needed. So far, I have attempted to execute the following command programmatically from both: A user-level process A root-level process sudo security add-trusted-cert -d -r trustRoot -k /Library/Keychains/System.keychain /path/to/cert.pem While the certificate does get installed, it does not appear as trusted in the Keychain Access app. One more point: The app is not distributed via MDM. App will be distributed out side the app store. Questions: What is the correct way to programmatically install and trust a root certificate in the System keychain? Does this require additional entitlements, signing, or profile configurations? Is it possible outside of MDM management? Any guidance or working samples would be greatly appreciated.

I’d like to confirm something regarding the hosting of the apple-app-site-association (AASA) file. We have a server that publicly hosts the AASA file and is accessible globally. However, this server sits behind an additional security layer (a security server/reverse proxy). My question is: Will this security layer affect Apple’s ability to access and validate the AASA file for Universal Links or App Clips? Are there specific requirements (e.g. headers, redirects, TLS versions, etc.) that we need to ensure the security server does not block or modify? Any guidance or best practices would be appreciated. Thanks!

Before device Reboot: Here no issue from keychain. 2025-06-17 11:18:17.956334 +0530 WAVE PTX [DB_ENCRYPTION] Key successfully retrieved from the Keychain default When device is in reboot and locked (Keychain access is set to FirstUnlock) App got woken up in background SEEMS(NOT SURE) DEVICE STILL IN LOCKED STARE IF YES THEN WHICH IS EXPECTED 2025-06-17 12:12:30.036184 +0530 WAVE PTX <ALA_ERROR>: [OS-CCF] [DB_ENCRYPTION] Error while retriving Private key -25308 default 2025-06-17 12:15:28.914700 +0530 WAVE PTX <ALA_ERROR> [DB_ENCRYPTION] Error retrieving key from the Keychain: -25300 default —————————————————— And as per logs, here user has launch the application post unlock and application never got the keychain access here also. HERE STILL HAS ISSUE WITH KEYCHAIN ACCESS. 2025-06-17 12:52:55.640976 +0530 WAVE PTX DEBUG : willFinishLaunchingWithOptions default 2025-06-17 12:52:55.651371 +0530 WAVE PTX <ALA_ERROR> [DB_ENCRYPTION] Error retrieving key from the Keychain: -25300 default

We are working with an iOS app where we have enabled the “Generate Debug Symbols” setting to true in Xcode. As a result, the .dSYM files are generated and utilized in Firebase Crashlytics for crash reporting. However, we received a note in our Vulnerability Assessment report indicating a potential security concern. The report mentions that the .ipa file could be reverse-engineered due to the presence of debug symbols, and that such symbols should not be included in a released app. We could not find any security-related information about this flag, “Generate Debug Symbols,” in Apple’s documentation. Could you please clarify if enabling the “Generate Debug Symbols” flag in Xcode for a production app creates any security vulnerabilities, such as the one described in the report? The report mentions the following vulnerability: TEST-0219: Testing for Debugging Symbols The concern raised is that debugging symbols, while useful for crash symbolication, may be leveraged to reverse-engineer the app and should not be present in a production release. Your prompt confirmation on this matter would be greatly appreciated. Thank you in advance for your assistance.

Hi, when creating a CryptoTokenKit extension according to https://developer.apple.com/documentation/cryptotokenkit/authenticating-users-with-a-cryptographic-token, it is neccessary to register it under the securityagent in order to make the CTK usable before login. i.e. we want to run sudo -u _securityagent /Applications/HostApp.app/Contents/MacOS/HostApp However, even with the empty application the command fails with illegal hardware instruction sudo -u _securityagent /Applications/HostApp.app/Contents/MacOS/HostApp I see that it always crashes when the HostApp is sandboxed, but it does not work even without sandboxing (i am sharing the error report message below). i actually noticed that when the HostApp is sandboxed and I run the above command, the extension starts to be usable even before login, even though i see the HostApp crash. The same does not happen without the sandbox So I am curious how to in fact properly register the CTK extension under security agent? Also am not sure how to unregister it from the _securityagent thank you for your help Version: 1.0 (1) Code Type: X86-64 (Native) Parent Process: Exited process [9395] Responsible: Terminal [399] User ID: 92 Date/Time: 2025-03-21 18:54:03.0684 +0100 OS Version: macOS 15.3.2 (24D81) Report Version: 12 Bridge OS Version: 9.3 (22P3060) Anonymous UUID: 41F9918C-5BCA-01C7-59C2-3E8CFC3F8653 Sleep/Wake UUID: 8AB66C75-3C32-41D4-9BD4-887B0FB468FE Time Awake Since Boot: 4300 seconds Time Since Wake: 1369 seconds System Integrity Protection: enabled Crashed Thread: 0 Dispatch queue: WMClientWindowManager Exception Type: EXC_BAD_INSTRUCTION (SIGILL) Exception Codes: 0x0000000000000001, 0x0000000000000000 Termination Reason: Namespace SIGNAL, Code 4 Illegal instruction: 4 Terminating Process: exc handler [9396] Application Specific Signatures: API Misuse Thread 0 Crashed:: Dispatch queue: WMClientWindowManager 0 libxpc.dylib 0x7ff80667b2bd _xpc_api_misuse + 113 1 libxpc.dylib 0x7ff80665f0e4 xpc_connection_set_target_uid + 187 2 WindowManagement 0x7ffd0b946693 -[WMClientWindowManager _createXPCConnection] + 1011 3 WindowManagement 0x7ffd0b947361 -[WMClientWindowManager _xpcConnection] + 65 4 WindowManagement 0x7ffd0b9447c9 __31-[WMClientWindowManager stages]_block_invoke + 41 5 libdispatch.dylib 0x7ff8067af7e2 _dispatch_client_callout + 8 6 libdispatch.dylib 0x7ff8067bca2c _dispatch_lane_barrier_sync_invoke_and_complete + 60 7 WindowManagement 0x7ffd0b9446fc -[WMClientWindowManager stages] + 268 8 AppKit 0x7ff80b1fd0b7 __54-[NSWMWindowCoordinator initializeStageFramesIfNeeded]_block_invoke + 30 9 libdispatch.dylib 0x7ff8067af7e2 _dispatch_client_callout + 8 10 libdispatch.dylib 0x7ff8067b0aa2 _dispatch_once_callout + 20 11 AppKit 0x7ff80b1fd060 -[NSWMWindowCoordinator initializeStageFramesIfNeeded] + 296 12 AppKit 0x7ff80a3b3701 -[NSWindow _commonInitFrame:styleMask:backing:defer:] + 888 13 AppKit 0x7ff80a3b2f77 -[NSWindow _initContent:styleMask:backing:defer:contentView:] + 1222 14 AppKit 0x7ff80a3b2aa9 -[NSWindow initWithContentRect:styleMask:backing:defer:] + 42 15 SwiftUI 0x7ff917f321e0 0x7ff91776f000 + 8139232 16 SwiftUI 0x7ff917a8e2f2 0x7ff91776f000 + 3273458 17 SwiftUI 0x7ff917bccfba 0x7ff91776f000 + 4579258 18 SwiftUI 0x7ff917f2ca8e 0x7ff91776f000 + 8116878 19 SwiftUI 0x7ff917f24a65 0x7ff91776f000 + 8084069 20 SwiftUI 0x7ff917f21540 0x7ff91776f000 + 8070464 21 SwiftUI 0x7ff91849e9f1 0x7ff91776f000 + 13826545 22 SwiftUICore 0x7ffb13103ea5 0x7ffb12c81000 + 4730533 23 SwiftUICore 0x7ffb13102e0f 0x7ffb12c81000 + 4726287 24 SwiftUI 0x7ff91849e903 0x7ff91776f000 + 13826307 25 SwiftUI 0x7ff91849bc1c 0x7ff91776f000 + 13814812 26 AppKit 0x7ff80a54f191 -[NSApplication _doOpenUntitled] + 422 27 AppKit 0x7ff80a4efc59 __58-[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:]_block_invoke + 237 28 AppKit 0x7ff80a963818 __102-[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:withFullFidelity:completionHandler:]_block_invoke + 101 29 AppKit 0x7ff80a4ef6fa __97-[NSDocumentController(NSInternal) _autoreopenDocumentsIgnoringExpendable:withCompletionHandler:]_block_invoke_3 + 148 30 AppKit 0x7ff80a4eee8f -[NSDocumentController(NSInternal) _autoreopenDocumentsIgnoringExpendable:withCompletionHandler:] + 635 31 AppKit 0x7ff80a96373d -[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:withFullFidelity:completionHandler:] + 269 32 AppKit 0x7ff80a3a6259 -[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:] + 529 33 AppKit 0x7ff80a3a5eb9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 679 34 Foundation 0x7ff807a4b471 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 307 35 Foundation 0x7ff807a4b285 _NSAppleEventManagerGenericHandler + 80 36 AE 0x7ff80e0e4e95 0x7ff80e0da000 + 44693 37 AE 0x7ff80e0e4723 0x7ff80e0da000 + 42787 38 AE 0x7ff80e0de028 aeProcessAppleEvent + 409 39 HIToolbox 0x7ff81217b836 AEProcessAppleEvent + 55 40 AppKit 0x7ff80a39ee6a _DPSNextEvent + 1725 41 AppKit 0x7ff80adf38b8 -[NSApplication(NSEventRouting) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 1290 42 AppKit 0x7ff80a38faa9 -[NSApplication run] + 610 43 AppKit 0x7ff80a362d34 NSApplicationMain + 823 44 SwiftUI 0x7ff9177a7da1 0x7ff91776f000 + 232865 45 SwiftUI 0x7ff917af0d40 0x7ff91776f000 + 3677504 46 SwiftUI 0x7ff917d8fef8 0x7ff91776f000 + 6426360 47 Crescendo CryptoTokenKit 0x10b1baf6e static HostApp.$main() + 30 48 Crescendo CryptoTokenKit 0x10b1bd2f9 main + 9 (HostApp.swift:24) 49 dyld 0x7ff8065c82cd start + 1805

Hi Forum, We’re building a security-focused SDK for iOS that includes SIM Binding and SIM Swap detection to help prevent fraud and unauthorised device access, particularly in the context of banking and fintech apps. We understand that iOS limits access to SIM-level data, and that previously available APIs (such as those in CoreTelephony, now deprecated from iOS 16 onwards) provide only limited support for these use cases. We have a few questions and would appreciate any guidance from the community or Apple engineers: Q1. Are there any best practices or Apple-recommended approaches for binding a SIM to a device or user account? Q2. Is there a reliable way to detect a SIM swap when the app is not running (e.g., via system callback, entitlement, or background mechanism)? Q3. Are fields like GID1, GID2, or ICCID accessible through any public APIs or entitlements (such as com.apple.coretelephony.IdentityAccess)? If so, what is the process to request access? Q4. For dual SIM and eSIM scenarios, is there a documented approach to identify which SIM is active or whether a SIM slot has changed? Q5. In a banking or regulated environment, is it possible for an app vendor (e.g., a bank) to acquire certain entitlements from Apple and securely expose that information to a security SDK like ours? What would be the compliant or recommended way to structure such a partnership? Thanks in advance for any insights!

Hi everyone, I’ve been working on storing keys and passwords in the macOS Keychain using the Keychain Services API. Specifically, I’m leveraging SecAccessControlCreateWithFlags to bind items to access control flags, and overall, it’s been working smoothly. I have a question regarding the .applicationPassword flag of SecAccessControlCreateWithFlags. While it successfully prompts the user to input a password, there are no apparent password rules, even a simple “1” is accepted. My questions are: Is there a way to enforce strong password requirements when using the .applicationPassword flag? If enforcing strong passwords isn’t possible, is there an alternative approach to provide a predefined strong password during the creation process, bypassing the need for user input? With SecAccessControlCreateWithFlags, I noticed the item isn’t stored in the traditional file-based Keychain but in an iOS-style Keychain, is there a way to store it in a file-based Keychain while marking it as unexportable? I appreciate any insights or suggestions. Thank you! Neil