Hello, I am currently developing a call service using CallKit and VoIP push. Recently, I have encountered a very challenging issue. During testing, when a VoIP push is received, the incomingCall gets triggered continuously, but then it automatically terminates after about 1-2 seconds. I am checking this issue under the debug scheme, and even when switching to different commits, the same problem persists. I suspect it might be an issue with the device, but I would like to confirm the cause and find a solution. Below are some characteristics I have noticed: On this device, when a VoIP push is received, CallKit automatically terminates, but this does not occur when debugging. The issue always occurs when not debugging. Looking at the device console logs related to callservicesd, there are many logs with 'invalidate' appended. For example: Invalidating process assertion for bundle ID from timeout All calls ended. Clearing system uplink muted cache Invalidate callDurationUpdateTimer InCallService has changed process state to 2 InCallService has been suspended; invalidating its XPC client connections. [0x565544180] invalidated because the current process cancelled the connection by calling xpc_connection_cancel() XPC connection invalidated from client These logs appear although our server did not receive any incoming call request, so we did not terminate it on our end. I also checked if there was a crash, but there were no reports left on the device. Could you please share any insights into the cause or solutions for this situation? Thank you.

I experimented a lot with Live Caller ID when it first appeared with iOS 18 Beta. Now I'm starting to pick it up again and have immediately noticed some detrimental differences between the behavior observed when it was in beta status to how it currently behaves with iOS 18.3. The main difference is caching - if a call is made and data from a live call id lookup displayed on the call screen, then if the call is made again immediately then that data is re-fetched from the server. And it takes a long time too, about 5 or 6 seconds before the data is displayed in the call screen (with the beta it took about 3 seconds). In the data set cache_expiry_minutes is set to 50, yet it's not being honored, there's no caching occurring at all. Yet this did used to occur several months ago when the feature was in beta. What's happened to caching, why is it no longer working when it used to? Another change is there used to be a notification displayed when a call was blocked, this no longer is displayed. Is this an intentional change or a bug?

I'd like to set the recordingYear in my Spotlight File Importer extension but the property is missing from CSSearchableItemAttributeSet e.g. in the resulting in mdls I'd like to see: kMDItemRecordingYear = 2008; This would allow me to search in Finder by the recording year criteria. There is a recordingDate property and I tried setting it to Date that only has a year but it didn't work. It just resulted in this: kMDItemRecordingDate = "2008-01-01 00:00:00 +0000";

I've been testing the Live CallerID feature using the Apple-provided local server example - live-caller-id-lookup-example. I've been running a local server with tunneling using ngrok for the initial setup. Everything was working perfectly with the following setup: @main final class CallerID: LiveCallerIDLookupProtocol { var context: LiveCallerIDLookupExtensionContext { LiveCallerIDLookupExtensionContext( serviceURL: URL(string: "https://example-tunnel.ngrok.io")!, tokenIssuerURL: URL(string: "https://example-tunnel.ngrok.io")!, userTierToken: Data(base64Encoded: "BBBB")! ) } } However, after I updated the URLs to the production ones, I encountered an issue: @main struct CallerID: LiveCallerIDLookupProtocol { var context: LiveCallerIDLookupExtensionContext { LiveCallerIDLookupExtensionContext( serviceURL: URL(string: "https://example.net/")!, tokenIssuerURL: URL(string: "https://example/issue")!, userTierToken: Data(base64Encoded: "BBBB")! ) } } The problem is that during calls or when updating PIR parameters, the application still attempts to connect to the initial ngrok tunnel URLs instead of using the new production URLs. I can confirm this because the logs on my local server show incoming requests, indicating that the application is still referencing the old ngrok tunnel URLs. Steps I’ve taken to resolve the issue include: Deleting and reinstalling the application. Using reset(forExtensionWithIdentifier:) Unfortunately, these attempts have not been successful. I even extracted the binary of the app and extension to inspect the strings, confirming that the correct production URLs are present. The server was started with the following command: PIRService --hostname 127.0.0.1 service-config.json Could this be some sort of caching bug on the iOS side, or am I missing something?

I've been exploring the Trails Sample App from this session at WWDC24. The app has a TrailEntity of type AppEntity which is leveraged in multiple places throughout the app, including: The GetTrailInfo App Intent with a trail parameter of type TrailEntity. A parameterized App Shortcut which calls the GetTrailInfo intent. The TrailDataManager's init calls updateSpotlightIndex(), which creates a CSSearchableItem for each Trail in the app, along with an associateAppEntity call linking the corresponding TrailEntity to each item that gets added to the CSSearchableIndex. If you build the app and search "trails" in Spotlight, the Trails Sample App section includes instances of TrailEntity as search results. But if you comment out the App Shortcut that takes a TrailEntity as a parameter and rebuild, there are no instances of TrailEntity in the search results. In both cases, the console prints [Spotlight] Trails indexed by Spotlight. Is this expected behavior? Why are the TrailEntity instances only appearing in Spotlight via the App Shortcut? Shouldn't the CSSearchableItem instances show up in Spotlight on their own regardless? If not, then what is the purpose of adopting Core Spotlight with App Entities? Does this add the app entities to the semantic index for "new Siri", even though they're not user facing in the Spotlight UI?

Hello. I'm preparing transfer app now but don't understand identifier length. reporence : https://developer.apple.com/documentation/sign_in_with_apple/transferring_your_apps_and_users_to_another_team 1 : xxxxxx.15fbexc6b31e41e78b891803a56b1axx.0247 2: xxxxxx.26ae9x5347f1f4fcebb3ae1b91807b5xx number 1 is The team-scoped user identifier number 2 is transfer identifier but length is different so i scared is it okay?

Hello, I am unable to figure out how I tell the FamilyActivityPicker whether it should show apps installed on my personal device (to be used with AuthorizationCenter.shared.requestAuthorization(for: .individual)) or apps installed on my child’s device (authenticated their phone via AuthorizationCenter.shared.requestAuthorization(for: .child)). Is there any parameter or SwiftUI modifier I need to apply? Otherwise, how does the user or the app know which token belongs to them and which token belongs to their child’s device? Radar: FB17020977 Thanks a lot for your help!

I'm using the new AlarmKit framework to build a Swift app that lets users schedule multiple repeating alarms. The goal is to allow users to stop all alarms for today if they wake up early, but the alarms should still ring on their scheduled days in the future (for example, every Monday). What I tried: When the user chooses to stop alarms for today, I delete all alarms and re-add them. However, this doesn't work as expected. If today is Monday and I delete and re-add the alarm with .weekday = .monday, it still rings today. That means re-adding the alarm doesn't skip today's instance, even though it's repeating. What I want to achieve: Skip or suppress today's alarms when the user stops them manually Keep the same alarms active for their scheduled days in the future Questions: Is there a way in AlarmKit to prevent a repeating alarm from ringing today if it was just re-added or there are better alternatives to this problem? Is the only workaround to delay re-adding until after today’s alarms would have fired? What is the best approach to achieve this?

I am developing a macOS word-processing app that should be distributed via the Apple App Store. Some of the app's functions like generating HTML and PDF exports should be automatable via Shortcuts and via shell scripts. To support the latter, I plan to include a command line tool inside the app that can be called from the Terminal or a shell script. The tool should be able to instruct the main app to then perform the desired commands. A well-known AppStore app that uses this design is BBEdit which also contains multiple command line tools that offer functionality from the main app to users of the Terminal. My technical questions now are: Should the command line tool executable be sandboxed and if yes, how? Even after many trials, I have not found a way to make a working sandboxed command line tool. If a sandboxed tool is started from the Terminal, it is immediately terminated with an exception in _libsecinit_appsandbox.cold.12. I am aware of the Apple developer documentation article Embedding A Helper Tool In A Sandboxed App, but it addresses a different architecture in which the helper tool is started from the main app and therefore is able to inherit its sandbox. BBEdit is only sandboxing the main app, but not its embedded command line tools and is still allowed in the App Store. Is this the way to go for me as well or does BBEdit get some special treatment in the App Store? How can the command line tool pass the permission to access files to the main app? As my main app is sandboxed, it needs explicit permission from the user to be able to access files. Users of a command line tool give this permission by providing file paths as arguments. How can I pass these permissions along to the main app? BBEdit is able to do this even when the user has not given it full-disk access. I know that it is using Apple Events for the communication between the command line tool and the main app, but I am not sure how this allows to pass permissions. Can anyone shed light on how to implement a solution here? Thanks!

Hi, I have a question about On-Demand Resources, I tried to put some bundles into the Initial Install Tags and Download Only On Demand, and I uploaded the build to TestFlight, then I tried to make 2 builds, and the sample is like this: Build A: Initial Install Tags have 100 Tags. Download Only On Demand have 5 Tags. Build B: all contents of Initial Install Tags are the same as in Build A. Download Only On Demand are the same as Build A but I added 5 more tags, so the total is 10 tags, 5 tags that are the same as Build A and 5 new tags. Then I tried to download Build A for the first time which is in TestFlight, and it runs normally, Initial Install Tags are downloaded when the main app is downloaded and Download Only On Demand is downloaded when I request the tag. However, when I tried to update to Build B which is in TestFlight, why are the Initial Install Tags deleted? and why should it be downloaded via request? not when the main app is downloaded? has anyone ever experienced something like this? Thanks!

When connecting SSLVPN through the "Paloalto GlobalProtect" app on an iOS iPhone, I try to connect through my Google Workspace account. During this process, an error occurs when logging in after entering my Google account. The error is as follows. The Paloalto Networks TAC Support team recommends that you contact Apple Support. When connecting SSLVPN through the "Paloalto GlobalProtect" app on an Android device, I can log in normally with my Google account. It only doesn't work on iOS iPhones. ~/Downloads/GPSupportInfo/Agent.log:119: 2024-12-16 14:08:08.047 GlobalProtect[4402:1352815] Error: (ManagerUtils.mm:566) Send message failed: GlobalProtect, error: Error Domain=NEVPNErrorDomain Code=1 "(null)" ~/Downloads/GPSupportInfo/Agent.log:119: 2024-12-16 14:08:08.047 GlobalProtect[4402:1352815] Error: (ManagerUtils.mm:566) Send message failed: GlobalProtect, error: Error Domain=NEVPNErrorDomain Code=1 "(null)" ~/Downloads/GPSupportInfo/Agent.log:119: 2024-12-16 14:08:08.047 GlobalProtect[4402:1352815] Error: (ManagerUtils.mm:566) Send message failed: GlobalProtect, error: Error Domain=NEVPNErrorDomain Code=1 "(null)" ~/Downloads/GPSupportInfo/Agent.log:119: 2024-12-16 14:08:08.047 GlobalProtect[4402:1352815] Error: (ManagerUtils.mm:566) Send message failed: GlobalProtect, error: Error Domain=NEVPNErrorDomain Code=1 "(null)" Paloalto said that it is the same as the content of the Apple Developer Forum below and told me to contact Apple Support. https://developer.apple.com/forums/thread/25928 Please tell me how to solve this problem.

Hi there, I am using WeatherKit to display weather forecast information in an app. I would like to include some information about when the weather forecast was issued for my users to see. This information is included in the response Metadata as documented in the WeatherKit REST API docs: https://developer.apple.com/documentation/weatherkitrestapi/metadata Specifically there is a “reportedTime” property which I would like to use here. However I am consuming WeatherKit via the Swift API, I don’t see this property available via the Swift APIs. How can I access the reportedTime property via the WeatherKit Swift APIs? Or is it not exposed via the Swift APIs?

Good day. Installed Sequoia Developer Beta. After that, the laptop started to behave incorrectly, programs over 1 GB stopped installing, updates were not installed, sometimes it rebooted spontaneously. Decided to roll back. With the help of another Macbook, I managed to install 14.6.1. Errors remained. Updates are not installed. Tried to restore through the recovery menu, error at 52 minutes, using a boot disk, the same error. What else can I do? Mac Book Pro M1 16gb/2tb

Hello, I’m working on a caller ID app and with the release of iOS 18.2, Apple has introduced the ability to set a third-party app as the default calling app. I have followed the official documentation for this feature and successfully set my app as the default phone app for making and receiving calls. Documentation Reference: https://developer.apple.com/documentation/callkit/preparing-your-app-to-be-the-default-calling-app Now, I’m facing some challenges and need some guidance: Custom UI for Incoming Cellular Calls: Is it possible to show a custom UI when receiving SIM-based cellular calls (not VoIP)? I want to replace the default iOS call screen with my own design when a cellular call is received. Can CallKit allow me to manage and display this custom UI for real cellular calls? Detecting Incoming Cellular Calls: Can I detect incoming SIM-based cellular calls when my app is set as the default calling app? I would like to track and show details of incoming calls (e.g., caller information, call duration) using a custom interface. Displaying Call Data (Call Duration, Recent Calls): Can I show call data (e.g., call duration, recent call history, etc.) for SIM-based cellular calls within my app when it is the default calling app? I need to know if it’s possible to retrieve and display this data in a custom format. Managing Outgoing Cellular Calls: For SIM-based outgoing calls, can I handle the process of initiating the call and then show a custom UI for the call in progress (similar to how VoIP apps manage outgoing calls)? I understand that CallKit can be used to manage the UI for calls, but I’m unsure about the limitations when it comes to real SIM-based cellular calls. Is it possible to implement these features with the current API capabilities, or are there any restrictions I should be aware of when managing cellular network calls? Thanks in advance for your help!

anyone has the same problem which is that your device activity extension ain't working even tho all the code work perfectly in the console, I setup it in the right way , tried to make schedule and it did the same exact thing when I tried to create usage threshold. anyone know the reason for this bug? here is my extension code import ManagedSettings import FamilyControls import Foundation import OSLog import UserNotifications class MonitoringExtension: DeviceActivityMonitor { private let defaults = UserDefaults(suiteName: "group.com.William.app") private let logger = Logger(subsystem: "com.William.app", category: "MonitoringExtension") override func eventDidReachThreshold(_ event: DeviceActivityEvent.Name, activity: DeviceActivityName) { let activityRaw = activity.rawValue logger.info("Limite atteinte: \(activityRaw)") scheduleNotification(title: "Limite dépassée", body: "Tu as utilisé trop de temps sur \(activityRaw).") guard let data = defaults?.data(forKey: "\(activityRaw)_selection"), let selection = try? JSONDecoder().decode(FamilyActivitySelection.self, from: data) else { logger.warning("Pas de sélection pour \(activityRaw)") return } let store = ManagedSettingsStore() // ← LE SEUL QUI MARCHE store.shield.applications = selection.applicationTokens if !selection.categoryTokens.isEmpty { store.shield.applicationCategories = .specific(selection.categoryTokens) } logger.info("BLOCAGE ACTIF via ManagedSettingsStore.default") } override func intervalDidEnd(for activity: DeviceActivityName) { super.intervalDidEnd(for: activity) let store = ManagedSettingsStore() store.clearAllSettings() // ← Débloque à minuit logger.info("Restrictions levées à la fin de l'intervalle") } private func scheduleNotification(title: String, body: String) { UNUserNotificationCenter.current().requestAuthorization(options: [.alert, .sound]) { granted, _ in guard granted else { return } let content = UNMutableNotificationContent() content.title = title content.body = body let request = UNNotificationRequest(identifier: UUID().uuidString, content: content, trigger: nil) UNUserNotificationCenter.current().add(request) } } }

我们项目使用了Appclip。之前默认轻App是可以正常打开的。但是最近发现在ios18系统及以上的时候，不能打开Appclip，而是跳转到safari浏览器中。请问该如何设置，可以在ios18以上系统中正常打开默认的Appclip？

Hi Apple Dev community, I want to ask if CallKit and CXCallDirectoryProvider (with addBlockingEntryWithNextSequentialPhoneNumber) doesn't work for 3rd party Phone apps. Is this a known issue that CallKit doesn't work on 3rd party iOS Phone apps (like WhatsApp, etc)? Thank you.

I'm trying to implement live caller id PIR server in python and I have an issue related to evaluation key config. I don't receive the POST /key request even if I try to install the extension on new device and I had this error in device system logs: error 11:21:30.663022+0200 ciphermld requestData(byKeywords:shardIds:clientConfig:) threw an error: CipherML.CipherMLError.missingSecre t Ke y I think the reason why the evaluation key is not generated is related to this error but I'm not sure. It might be also related to HE params - I tried with the same params as in swift server example with plaintext_modulus=17 and it works, but for plaintext_modulus=65537 on the same device the system doesn't send me the evaluation key. Is there a limitation that restricts the evaluation key generation for some HE params? There is how the entire config object that I retrieve looks like: { "configs": { "Live-C aller-ID-Lookup. TestLiveCallerI D.iden tity": { "pir_config": { "encry ption_p aram eters": { "pol ynomial_deg ree": "4096", "plaint ext_mo dulus": "65537", "coeff icient_m oduli": [ "134176769", "268369921", "268361729" ], "secu rity_le vel": "SECU RITY LEVEL QUANT UM128", "h e_sc heme": "H E_SC HEM E_B F V" }, "shard_configs": [ { "num_entries": "2", "entry_size": "55991", "dimensions": [ "2", "1" ], "shard_id": "" } ], "keyword_pir_params": { "num_hash_functions": "2", "sharding_function": { "sha256": {} } }, "algorithm": "PIR _ALGO RITHM _MUL_PIR", "batch_size": "2", "evalu ation_ke config_hash": "" }, "config_id": "" } }, "key_info": [ { "timestamp": "1738660849", "key_config": { "encryp tion_par ameters": { "polynomial_degree": "4096", "plaintex t_mo dulus": "65537", "coeffic ient_m oduli": [ "134176769", "268369921", "268361729" ], "secu rity_level": "SECUR ITY_LEVEL_QU ANTUM128", "he_sc heme": "HE_SC HEME_BFV" }, "gal ois_e lements": [ 20 49, 40 97 ], "has _rel in_key": true } } ] } PS evaluation key data is just a placeholder, but anyway it should be skipped cause of expired timestamp More logs: ```language default 11:21:30.535865+0200 ciphermld Running rotation task for ["Live-Caller-ID-Lookup.TestLiveCallerID.identity"] info 11:21:30.535953+0200 ciphermld Skipping groups that manage their own networking: <private> default 11:21:30.537007+0200 ciphermld Request to fetchConfigs has started for useCases '["Li ve-Caller-ID-Lookup.TestLiveCallerID.identity"]', userId: '<private>', existingConfigIds: '["id"]' default 11:21:30.542174+0200 ciphermld Request to queries-batch has started for userId: '<private>', length: 28350 default 11:21:30.655914+0200 ciphermld Request to fetchConfigs has finished, response length: 230 default 11:21:30.656182+0200 ciphermld Received configurations: 1 usecase(s), 1 key(s) for group 'Live-Caller-ID-Lookup.TestLiveCallerID.identity' debug 11:21:30.660868+0200 ciphermld Skipping non-active key: timestamp: 1738660849 key_config { encryption_parameters { polynomial_degree: 4096 plaintext_modulus: 65537 coefficient_moduli: [134176769, 268369921, 268361729] security_level: Quantum128 he_scheme: BFV } galois_elements: [2049, 4097] has_relin_key: true } error 11:21:30.662982+0200 ciphermld No key for use-case 'Live-Caller-ID-Lookup.TestLiveCallerID.identity' error 11:21:30.663022+0200 ciphermld requestData(byKeywords:shardIds:clientConfig:) threw an error: CipherML.CipherMLError.missingSecre t Ke y default 11:21:30.663824+0200 com.apple.CallKit.CallDirectory <private> XPC request complete, results(0) error:Error Domain=CipherML.CipherMLError Code=32 "missing secre t ke y" UserInfo={NSLocalizedDescription=missing secre t ke y} default 11:21:30.972372+0200 ciphermld Request to queries-batch has finished response, length: 0 default 11:21:30.974711+0200 com.apple.CallKit.CallDirectory <private> XPC request complete, results(1) error:(null) default 11:21:36.161964+0200 com.apple.CallKit.CallDirectory <private> Sending XPC request default 11:21:36.163149+0200 com.apple.CallKit.CallDirectory <private> Sending XPC request default 11:21:36.169931+0200 ciphermld requestData(byKeywords:shardIds:clientConfig:) method was called default 11:21:36.170448+0200 ciphermld requestData(byKeywords:shardIds:clientConfig:) method was called default 11:21:36.174001+0200 ciphermld Cached: 0 / Missing: 1 error 11:21:36.174997+0200 ciphermld No userId or secre t Ke y for use-case '.Lve-Caller-ID-Lookup.TestLiveCallerID.identity'. Running rotation task' default 11:21:36.175075+0200 ciphermld Running rotation task for ["Live-Caller-ID-Lookup.TestLiveCallerID.identity"] info 11:21:36.175240+0200 ciphermld Skipping groups that manage their own networking: <private> default 11:21:36.177700+0200 ciphermld Request to fetchConfigs has started for useCases '["Live-Caller-ID-Lookup.TestLiveCallerID.identity"]', userId: '<private>', existingConfigIds: '["id"]' default 11:21:36.179914+0200 ciphermld Request to queries-batch has started for userId: '<private>', length: 28350 default 11:21:36.336051+0200 ciphermld Request to fetchConfigs has finished, response length: 230 default 11:21:36.336308+0200 ciphermld Received configurations: 1 usecase(s), 1 key(s) for group 'Live-Caller-ID-Lookup.TestLiveCallerID.identity' debug 11:21:36.341522+0200 ciphermld Skipping non-active key: timestamp: 1738660849 key_config { encryption_parameters { polynomial_degree: 4096 plaintext_modulus: 65537 coefficient_moduli: [134176769, 268369921, 268361729] security_level: Quantum128 he_scheme: BFV } galois_elements: [2049, 4097] has_relin_key: true } error 11:21:36.356497+0200 ciphermld No key for use-case 'Live-Caller-ID-Lookup.TestLiveCallerID.identity' error 11:21:36.356669+0200 ciphermld requestData(byKeywords:shardIds:clientConfig:) threw an error: CipherML.CipherMLError.missingSecre t Ke y default 11:21:36.357075+0200 com.apple.CallKit.CallDirectory <private> XPC request complete, results(0) error:Error Domain=CipherML.CipherMLError Code=32 "missing secre t ke y" UserInfo={NSLocalizedDescription=missing secre t ke y} default 11:21:36.625701+0200 ciphermld Request to queries-batch has finished response, length: 0 default 11:21:36.626749+0200 com.apple.CallKit.CallDirectory

I have a public and accessible .well-known/apple-app-site-association file for both my domain.com and subdomain.domain.com with "paths": ["*"] . Both example.com and blog.example.com are added in Associated domains and any link that contains domain.com and domain.com/path normally deep links into my app. I used to have an *.example.com that successfully deep linked all my subdomains into my app but now I had to remove it as some subdomains will need to link to other apps, but some should still link to the same app. I removed * but left blog.example.com as that specific subdomain still needs to deep link into my app. But now blog.example.com is not even being recognized by my app and any link starting with blog.example.com just opens in safari. What am I missing? Why is this happening ?

Widgets on the widget is not responding to the touch properly. This issue is also affecting within the home screen widget in a way that the widget switches to light mode by itself even though I am in dark mode. Additionally, lock screen does not to respond once the lock screen widget has been edited. Is anyone else having this issue?