I've a strange problem which is only occurring on 2 client devices. We have enabled Universal links, and have it fully tested and working. On one client device, the link never opens our app; but here's the strange thing: If I long-press on our link (in Messages), it gives a preview (as expected), and the context menu offers "Open in ", as well as "Open in Safari". Tapping on "Open in " does nothing. I've tried the following: Checked I could access the site-association file over https with no redirects Enabled developer mode and used universal link debug feature: pasted the same link - Developer mode says it will open the app. I've carried out the sysdiagnose; And there are entries in there for our app in swcutil_show.txt. Snipped below: Service: applinks App ID: <my fully qualified app bundle id> App Version: 760.0 App PI: <LSPersistentIdentifier 0x6b8008930> { v = 0, t = 0x8, u = 0x45c, db = DC8D18A2-430D-4AD4-A5BE-B7A003CF9A6F, {length = 8, bytes = 0x5c04000000000000} } Domain: www.<mydomain>.com Patterns: {"/":"/cc/*"}, {"?":{"t":"*"},"/":"/md/"} User Approval: unspecified Site/Fmwk Approval: approved Flags: Last Checked: 2025-04-29 09:10:21 +0000 Next Check: 2025-05-04 08:42:50 +0000 -------------------------------------------------------------------------------- Service: applinks App ID: <my fully qualified app bundle id> App Version: 760.0 App PI: <LSPersistentIdentifier 0x6b8008930> { v = 0, t = 0x8, u = 0x45c, db = DC8D18A2-430D-4AD4-A5BE-B7A003CF9A6F, {length = 8, bytes = 0x5c04000000000000} } Domain: <mydomain>.com Patterns: {"/":"/cc/*"}, {"?":{"t":"*"},"/":"/md/"} User Approval: unspecified Site/Fmwk Approval: approved Flags: Last Checked: 2025-04-29 09:10:21 +0000 Next Check: 2025-05-04 08:42:50 +0000 -------------------------------------------------------------------------------- Service: applinks App ID: <my fully qualified app bundle id> App Version: 760.0 App PI: <LSPersistentIdentifier 0x6b8008930> { v = 0, t = 0x8, u = 0x45c, db = DC8D18A2-430D-4AD4-A5BE-B7A003CF9A6F, {length = 8, bytes = 0x5c04000000000000} } Domain: *.<mydomain>.com Patterns: {"/":"/cc/*"}, {"?":{"t":"*"},"/":"/md/"} User Approval: unspecified Site/Fmwk Approval: approved Flags: Last Checked: 2025-04-29 09:10:21 +0000 Next Check: 2025-05-04 08:42:50 +0000 -------------------------------------------------------------------------------- The version numbers match the installed version of my app I've tried running logging and just capturing logs before and after I press the "open in ", but there's nothing suspicious in there. And the kicker - it's only happening on a single device. No other devices are experiencing this.

Hi, I'm currently working on an app made originally for iOS 15. On it, I add an observer on viewDidLoad function of my ViewController to listen for changes on the UserDefault values for connection settings. NotificationCenter.default.addObserver(self, selector: #selector(settingsChanged), name: UserDefaults.didChangeNotification, object: nil) Said values can only be modified on the app's section from System Settings. Thing is, up to iOS 17, the notification fired as expected, but starting from iOS 18, the notification doesn't seem to be sent by the OS. Is there anything I should change in my observer, or any other technique to listen for the describe event? Thanks in advance.

Observed few times that providerDidBegin(_:) delegate never called for the complete app session after app init(as part of this CXProvider registered) which was built with SDK 26 and running on iOS 26. This issue observed multiple times with our testing. Since there is no providerDidBegin:, client is marking CallKit as not ready and never report any calls for VoIP APNS and ended up in app crash due to "[PKPushRegistry _terminateAppIfThereAreUnhandledVoIPPushes]" Please refer for sysdiagnose logs : FB19778306

An issue with the CallKit UI, specifically regarding the functionality of the speaker button. When a user initiates a video call with CallKit and then, using the existing CallKit session, initiates an audio call, there are no issues with CallKit or the audio. However, if the user terminates the video call from the CallKit UI, the active CallKit session ends. To resume the ongoing audio call, we report a new CallKit call upon the end call trigger. While there are no issues with this reporting, the CallKit UI does not provide an audio route for the built-in receiver, and the speaker button remains unresponsive. IPA was build on SDK 18 and running on iOS beta 26. Issue is NOT seen with SDK18 and running iOS 18.x or lower devices. Feedback - FB18855566

Hi everyone, We’re running into a serious issue with App Clip Experience updates not propagating to devices, and I’m hoping someone here has encountered (or solved) this before. Problem Once an App Clip Experience is created and used on devices, subsequent updates made in App Store Connect do not reflect on any devices, even after a long period of time. We’ve tried: • Updating the App Clip Experience URL (adding utm parameters, for example, utm_source and scanning via QR code) • Modifying Experience metadata/content • Waiting several days (over a week) • Testing on multiple devices (including devices that never opened the App Clip before) Despite this, the App Clip continues to show the initially created content, while App Store Connect clearly shows the updated configuration. Important Details • We currently have ~1,300 App Clip Experiences created • All App Clips use the same App Clip Bundle ID • The content behind the URLs updates correctly on the website • Only the App Clip continues to show stale / initial data • Removing and re-invoking the App Clip on devices does not consistently fix the issue At this point, manual updates via App Store Connect appear to be completely ignored once the App Clip is “established.” Questions 1. Is there a known hard cache or CDN behavior on Apple’s side that prevents App Clip Experience updates from propagating? 2. Is there any way to invalidate or refresh an existing App Clip Experience? 3. Does having a large number of App Clip Experiences (~1300) affect update behavior or caching? 4. Is the recommended approach to treat App Clip Experience as immutable and handle all updates via backend / dynamic content only? Right now it feels like: App Clip Experience is effectively a one-time snapshot and not a live-updatable configuration. Any insights, confirmations, or official guidance would be greatly appreciated. Thanks in advance.

On macOS 26, I've run into a situation when a user “customizes” a folder icon with Finder by assigning/changing an SF Symbol or an emoji, QLThumbnailGenerator keeps returning the stale initially retrieved folder icon (no matter whether it had been customized or not) until my app quits. After the app is re-launched, the icon is correctly retrieved once again. let generator = QLThumbnailGenerator.shared let size: CGSize = CGSize(width: 64, height: 64) let request = QLThumbnailGenerator.Request(fileAt: url, size: size, scale: NSScreen.main!.backingScaleFactor, representationTypes: .icon) request.iconMode = true do { let thumb = try await generator.generateBestRepresentation(for: request) thumb.nsImage.size = size return thumb.nsImage } catch { print("generateThumbnail: \(error)") return nil } It seems like the QuickLook Thumbnailing cache does not invalidate automatically upon folder customization. Is there any way to manually invalidate the QuickLook Thumbnailing cache?

var format = "%7B%22sign%22%3Anull%2C%22company%22%3A%22%E5%85%84%E5%BC%9F%E6%B5%B7%E6%B4%8B%E7%A7%91%E6%8A%80%E6%9C%89%E9%99%90%E5%85%AC%E5%8F%B8%22%2C%22businessNo%22%3Anull%2C%22scene%22%3Anull%2C%22interviewCode%22%3A%22767676%22%7D" let message = withVaList([]) { args in let msg = NSString(format: format, arguments: args) print(msg) }

When we compile our app using Xcode 26 and run it on iOS 26, we encounter a strange crash where the crashing thread shows no stack trace. After inspecting the registers, we have initially traced it to the Google Mobile Ads SDK. When we disable the initialization of the Google Mobile Ads SDK, the app no longer crashes. However, running the Google Mobile Ads SDK demo app on iOS 26 alone does not cause any issues; the crash only occurs once it is integrated into our app. We also tried enabling Address Sanitizer and Zombie Objects but found no valuable clues. Could you advise what other methods or tools we can use to further diagnose this issue? Additionally, when we compile the app with Xcode 15 and run it on iOS 26, everything works fine without crashes. app-2025-09-19-161044.ips.txt

I have a basic setup following WWDC 2020 on Safari Web Extensions and another one on XPC. The video even mentions that one can use UserDefaults or XPC to communicate with the host app. Here is my setup. macOS 15.2, Xcode 16.2 A macOS app (all targets sandboxed, with an app group) with 3 targets: SwiftUI Hello World web extension XPC Service The web extension itself works and can update UserDefaults, which can then be read by SwiftUI app - everything works by the book. The app can communicate to the XPC service via NSXPCConnection - again, everything works fine. The problem is that the web extension does not communicate with XPC, and this is what I need so that I can avoid using UserDefaults for larger and more complex payloads. Web Ext handler code: class SafariWebExtensionHandler: NSObject, NSExtensionRequestHandling { func beginRequest(with context: NSExtensionContext) { // Unpack the message from Safari Web Extension. let item = context.inputItems[0] as? NSExtensionItem let message = item?.userInfo?[SFExtensionMessageKey] // Update the value in UserDefaults. let defaults = UserDefaults(suiteName: "com.***.AppName.group") let messageDictionary = message as? [String: String] if messageDictionary?["message"] == "Word highlighted" { var currentValue = defaults?.integer(forKey: "WordHighlightedCount") ?? 0 currentValue += 1 defaults?.set(currentValue, forKey: "WordHighlightedCount") } let response = NSExtensionItem() response.userInfo = [ SFExtensionMessageKey: [ "Response to": message ] ] os_log(.default, "setting up XPC connection") let xpcConnection = NSXPCConnection(serviceName: "com.***.AppName.AppName-XPC-Service") xpcConnection.remoteObjectInterface = NSXPCInterface(with: AppName_XPC_ServiceProtocol.self) xpcConnection.resume() let service = xpcConnection.remoteObjectProxyWithErrorHandler { error in os_log(.default, "Received error: %{public}@", error as CVarArg) } as? AppName_XPC_ServiceProtocol service?.performCalculation(firstNumber: 23, secondNumber: 19) { result in NSLog("Result of calculation XPC is: \(result)") os_log(.default, "Result of calculation XPC is: \(result)") context.completeRequest(returningItems: [response], completionHandler: nil) } } } The error I'm getting: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named com.***.AppName.AppName-XPC-Service was invalidated: failed at lookup with error 3 - No such process." What am I missing?

In mainland China, CallKit is not available. Recently, I discovered LiveCommunicationKit. Can it replace CallKit? There is no relevant introduction in the documentation. Can someone help me understand how to use it? https://developer.apple.com/documentation/livecommunicationkit

Introduction: I’m encountering a consistent crash in production on iOS 26.2 (build 23C55). The crash occurs deep within libicucore when calling [NSDateFormatter dateFromString:]. Crash Summary: Exception Type: SIGSEGV (SEGV_ACCERR) Fault Address: 0xffffffff Thread: Crashed on Main Thread (Thread 0) Library: libicucore.A.dylib Code Snippet: The crash is triggered by the following method. It converts a string to an NSDate using a specific format and locale: // 获取日期date - (NSDate *)getDateWithTime:(NSString *)time formatter:(NSString *)formatterStr { NSDateFormatter *formatter = [[NSDateFormatter alloc] init]; [formatter setDateFormat:formatterStr]; formatter.timeZone = [NSTimeZone timeZoneWithName:@"Asia/Shanghai"]; formatter.locale = [[NSLocale alloc] initWithLocaleIdentifier:@"en_US_POSIX"]; return [formatter dateFromString:time]; } Backtrace: Here is the relevant part of the crash report: Incident Identifier: E24485B6-C53E-4115-A6CF-A7E4A952AD50 CrashReporter Key: 21FAC1CF-F56B-409A-98AA-351D3D2EB06C Hardware Model: iPhone18,2 Code Type: ARM-64 Parent Process: [1] Date/Time: 2026-01-12T01:32:25Z OS Version: iPhone OS 26.2 (23C55) Report Version: 105 SDK Version: 0.0.4 Exception Type: SIGSEGV Exception Codes: SEGV_ACCERR at 0xffffffff Crashed Thread: 0 Thread 0 Crashed: 0 libicucore.A.dylib 0x000000019b81def8 0x19b74a000 + 868088 1 libicucore.A.dylib 0x000000019b7da91c 0x19b74a000 + 592156 2 libicucore.A.dylib 0x000000019b8d8340 0x19b74a000 + 1631040 3 libicucore.A.dylib 0x000000019b8eae18 0x19b74a000 + 1707544 4 libicucore.A.dylib 0x000000019b8eb600 0x19b74a000 + 1709568 5 libicucore.A.dylib 0x000000019b878be4 0x19b74a000 + 1240036 6 libicucore.A.dylib 0x000000019b87ae84 0x19b74a000 + 1248900 7 libicucore.A.dylib 0x000000019b87b2dc 0x19b74a000 + 1250012 8 libicucore.A.dylib 0x000000019b9564ac 0x19b74a000 + 2147500 9 libicucore.A.dylib 0x000000019b954afc 0x19b74a000 + 2140924 10 libicucore.A.dylib 0x000000019b952794 0x19b74a000 + 2131860 11 libicucore.A.dylib 0x000000019b98689c 0x19b74a000 + 2345116 12 CoreFoundation 0x00000001895dbfe0 0x18953d000 + 651232 13 CoreFoundation 0x00000001895dbaa0 0x18953d000 + 649888 14 Foundation 0x0000000186d2029c 0x186b88000 + 1671836 15 Foundation 0x00000001874a62dc 0x186b88000 + 9560796 16 Foundation 0x00000001874a6384 0x186b88000 + 9560964 17 xxxx 0x0000000105ea6e30 -[xxxxx getDateWithTime:formatter:] + 168 and Thread 0 crashed with ARM-64 Thread State: pc: 0x000000019b81def8 fp: 0x000000016f96bc10 sp: 0x000000016f96bbd0 x0: 0x00000000ffffffff x1: 0x000000019ba1e8e0 x2: 0x0000000000000002 x3: 0x000000000000000b x4: 0x0000000000000074 x5: 0x0000000000000069 x6: 0x0000000000000000 x7: 0xfffff0003ffff800 x8: 0x000000009ba18014 x9: 0x00000001148dffd0 x10: 0x0000000000000002 x11: 0x0000000000000004 x12: 0x0000000000000220 x13: 0x0000000000000030 x14: 0x000000015b6f36b8 x15: 0x000000015cfe0000 x16: 0x00000002a19d0ff0 x17: 0x00000001f5590a70 x18: 0x0000000000000000 x19: 0x000000016f96bc30 x20: 0x0000000000000000 x21: 0x000000015cfe3200 x22: 0x000000019ba18014 x23: 0x0000000000000000 x24: 0x000000015cfe32a0 x25: 0x0000000000000003 x26: 0x0000000000000000 x27: 0x0000000000000000 x28: 0x000000015cfe3200 lr: 0x000000019b7da958 cpsr: 0x00000000a0000000

Hi, I'm trying to make use of the Device Activity Labels where you supply an ApplicationToken. I can successfully get it to show the icon + title of the Application (twitter in my case) but I cannot get the styling to work. // Works .labelStyle(.iconOnly) .labelStyle(.titleOnly) .border(...) ![]("https://developer.apple.com/forums/content/attachment/9660b578-a36f-4d5a-ae18-653a207aa5ab" "title=Screenshot 2023-03-12 at 12.57.34 PM.png;width=1218;height=844") // Does NOT work .font(.largeTitle) .foregroundColor(.blue) I have checked the same style (or just modifiers) against a standard Label and they actually do work in the code below. // This is an application token. Some style not applied. Label(targetApp) .labelStyle(MyStyle()) // Showing the same style using a simple label. All styles correctly applied. Label("Twitter", systemImage: "video.square.fill") .labelStyle(MyStyle()) Is changing the font + color of the title for this Label(_ applicationToken:) supported?

Hey there! I faced issue in iOS 18 and newer when Spotlight search doesn't show my App in results. In older versions it works. Here is my code: func configureUserActivitity(with id: String, keywords: [String]) { let activity = NSUserActivity(activityType: id) activity.contentAttributeSet = self.defaultAttributeSet activity.isEligibleForSearch = true activity.keywords = Set(keywords) activity.becomeCurrent() self.userActivity = activity } I didn't find any reasons why it doesn't work now. Maybe I should report a bug?

Hi all, I'm trying to add Spotlight support to a macOS app that handles custom virtual machine bundles with the .vpvm extension. I’ve followed the current documentation and used the modern CSImportExtension approach with a Spotlight Importer extension target. Here’s what I’ve done: App Info.plist: Declared com.makeprog.vpvm as a UTI conforming to com.apple.package. Registered it under UTExportedTypeDeclarations and CFBundleDocumentTypes. Spotlight Importer Extension: Added a new macOS target using the Spotlight Import Extension template. Set the NSExtensionPointIdentifier to com.apple.spotlight.import. Used CSSupportedContentTypes = com.makeprog.vpvm. Implemented a minimal update(_ attributes:forFileAt:) method that sets displayName, title, and contentDescription. Other steps: Verified that the .appex is embedded under Contents/PlugIns/. Confirmed it appears in mdimport -e output with correct UTI. Used mdimport -m -d2 -t /path/to/file.vpvm, but I still get: Imported '/path/to/file.vpvm' of type 'com.makeprog.vpvm' with no plugIn. The extension is never invoked. I’ve also tried: Ensuring the .vpvm file is a valid directory bundle. Restarting Spotlight / rebuilding index. Ensuring the app and extension are properly signed. Tried installing the app in test virtual machine Question: Has anyone successfully used CSImportExtension for custom UTIs? Is there something additional I need to do for the extension to be recognized and triggered? Any advice or examples would be greatly appreciated! Thanks in advance.

Hello, I’m building an app that helps people spend less time on social media apps. For that, I make heavy use of Apple’s Screen Time APIs, such as ManagedSettings and FamilyControls. When an app is locked using a ShieldConfiguration, the user has to open my app in order to unlock it (e.g. enter a code). This is very cumbersome because no documented API exists to open the parent app (=my app) from the ShieldActionDelegate (also part of my app) when the user presses a button of the ShieldConfiguration. The ShieldActionDelegate callback just offers three options in its ShieldActionResponse: .none .defer .close .openParentApp is missing. We are working around this limitation by sending a local push notification that the user has to tap on. This has multiple drawbacks: It has to be ensured that notification permission has been granted. It has to be ensured that notifications can be delivered even while focus is enabled. Features such as Apple Intelligence notification summaries and notification prioritization can heavily delay delivering notifications and thus frustrate the user. Neither my users nor myself do understand why this is not possible in a smoother way, at least according to the documentation. There are 3rd party apps that have such functionality, they can directly open their own app from a button press in the Shield, see here: https://apps.apple.com/us/app/applocker-passcode-lock-apps/id1132845904 It would be great if Apple could level the playfield for all developers and document how this is achievable, because technically it clearly is. Thanks a lot and have a great day!

content = try String(contentsOfFile: filepath) is the following warning. 'init(contentsOfFile:)' was deprecated in iOS 18: Use init(contentsOfFile:encoding:) instead After internet searching I could find an answer. I would appreciate a rewrite of my code line to get rid of 31 warnings. Thanks a LOT Charlie

After reading the news below, we are currently working on updating our app in preparation for the enforcement of Texas SB 2420. https://developer.apple.com/news/?id=2ezb6jhj Based on the information in the announcement, we understand that parents will be able to revoke their consent for apps. However, we are unsure how an app is supposed to obtain or verify the parent’s consent status in the first place. We reviewed the Declared Age Range API and PermissionKit’s Significant Change API, but could not find any functionality related to this. If anyone with expertise on this topic has insight, we would greatly appreciate your guidance. Thank you in advance.

I'm implementing the PushToTalk framework and have encountered an issue where channelManager(_:didActivate:) is not called under specific circumstances. What works: App is in foreground, receives PTT push → didActivate is called ✅ App receives audio in foreground, then is backgrounded → subsequent pushes trigger didActivate ✅ What doesn't work: App is launched, user joins channel, then immediately backgrounds PTT push arrives while app is backgrounded incomingPushResult is called, I return .activeRemoteParticipant(participant) The system UI shows the speaker name correctly However, didActivate is never called Audio data arrives via WebSocket but cannot be played (no audio session) Setup: Channel joined successfully before backgrounding UIBackgroundModes includes push-to-talk No manual audio session activation (setActive) anywhere in my code AVAudioEngine setup only happens inside didActivate delegate method Issue persists even after channel restoration via channelDescriptor(restoredChannelUUID:) Question: Is this expected behavior or a bug? If expected, what's the correct approach to handle incoming PTT audio when the app is backgrounded and hasn't received audio while in the foreground yet?

Hello, I’m developing an app for both iOS and macOS using Mac Catalyst. On the iOS target, the DeclaredAgeRange framework works fine: I enabled the capability, set the entitlement, and can call the APIs successfully. However, when I build the Mac Catalyst target, I get compile-time errors because DeclaredAgeRange cannot be imported. Environment Xcode 26.0.1 Deployment Target (iOS): 13.0 Mac Catalyst target enabled (same bundle ID, same source code base as iOS version) iOS build works well with DeclaredAgeRange What I tried Added the Declared Age Range capability in Signing & Capabilities for iOS target → works fine. Tried setting Mac Catalyst Deployment Target to macOS 15.0+ and rebuilding → still failed to import. Because it didn’t help, I reverted and removed the separate macOS target setting. On Catalyst, the module simply isn’t available (import DeclaredAgeRange fails). From Apple’s documentation, my understanding is that DeclaredAgeRange should also be supported on Mac Catalyst (SDK 26+). But in practice I cannot import it in my Catalyst build. Questions Is DeclaredAgeRange actually supported on Mac Catalyst right now? If so, are there additional setup steps (capabilities, entitlements, provisioning, etc.) specific to Catalyst? Has anyone successfully imported and used DeclaredAgeRange in a Catalyst project? Any guidance or confirmation would be greatly appreciated. Thanks in advance.

We are trying to extend our app with Push To Talk functionality by integrating the Push To Talk framework. We are extensively testing what happens if the app is running in the foreground, in the background or not running at all. When the app is in the foreground, and the user has joined a channel we maintain an open connection to our server. When a remote participant starts streaming audio, we immediately call setActiveRemoteParticipant on our PTChannelManager instance. The PTT system will than call our delegate's channelManager:didActivate audioSession method and we can successfully play the incoming audio. When the app is not running at all, there is of course no active connection initially. When another participant starts talking we send a push notification. The PTT system will start our app in the background, call the incomingPushResult method on our delegate, after returning the remote participant the PTT framework will then call the channelmanager:didJoin delegate method which we will use to re-establish the server connection, the PTT framework then calls our channelManager:didActivate audioSession delegate method and we can then successfully play audio. Now the problem. When the application was initially in the foreground and has an established server connection, we initially keep the server connection active when the app enters the background state, until a certain timeout or the system decides our app needs to be killed / removed from memory. This allows us to finish an incoming audio stream, quickly react on incoming responses etc. When we then receive an incoming audio stream after a certain delay (for example 5 seconds) we call the channelManager.setRemoteParticipant method (using try await syntax). This finishes successfully, without any error, however the channelManager:didActivate audioSession delegate method is never called. Manually setting up an audio session is not allowed either and returns an error. Our current workaround for this issue is to disconnect the server connection as soon as the app goes into the background. This will make sure our server sends a push notification, which is successful in activating the audio session after which we can play audio. However, this means we need to re-establish the connection which will introduce an unnecessary delay before we can start playback (and currently means we loose some audio). This also means we need to do extra checks when going to the background to make sure there is no active incoming stream. After each incoming stream we have to check again if we are in the background and disconnect immediately to make sure we get a push notification next time. This can of course also lead to race conditions in an active conversation where we might need to disconnect between incoming streams and if we don't do this in time we might never get an activated audio session. Now this might be by design, as Apple might not want us to keep the server connection active when the application enters the background state. But if that's the case I would expect the channelManager.setRemoteParticipant method to throw an error, but it doesn't. It returns successfully after which we would expect the audio session to get activated as well. So maybe we are not setting the capabilities of our project correctly (we might need other background permissions as well, although we already experimented with that), or we need to do something else to make this work?