I'm working on integrating Passkey functionality into my iOS app (targeting iOS 16.0+), and I'm facing an issue where the system dialog still shows the "Save to another device" option during Passkey registration. I want to hide this option to force users to create Passkeys only on the current device. 1. My Current Registration Implementation Here’s the code I’m using to create a Passkey registration request. I’ve tried to use ASAuthorizationPlatformPublicKeyCredentialProvider (which is supposed to target platform authenticators like Face ID/Touch ID), but the "Save to another device" option still appears: `// Initialize provider for platform authenticators let provider = ASAuthorizationPlatformPublicKeyCredentialProvider(relyingPartyIdentifier: domain) // Create registration request let registrationRequest = provider.createCredentialRegistrationRequest( challenge: challenge, name: username, userID: userId ) // Optional configurations (tried these but no effect on "another device" option) registrationRequest.displayName = "Test Device" registrationRequest.userVerificationPreference = .required registrationRequest.attestationPreference = .none // Set up authorization controller let authController = ASAuthorizationController(authorizationRequests: [registrationRequest]) let delegate = PasskeyRegistrationDelegate(completion: completion) authController.delegate = delegate // Trigger the registration flow authController.performRequests(options: .preferImmediatelyAvailableCredentials)` 2. Observation from Authentication Flow (Working as Expected) During the Passkey authentication flow (not registration), I can successfully hide the "Use another device" option by specifying allowedCredentials in the ASAuthorizationPlatformPublicKeyCredentialAssertionRequest. Here’s a simplified example of that working code: let assertionRequest = provider.createCredentialAssertionRequest(challenge: challenge) assertionRequest.allowedCredentials = allowedCredentials After adding allowedCredentials, the system dialog no longer shows cross-device options—this is exactly the behavior I want for registration. 3. My Questions Is there a similar parameter to allowedCredentials (from authentication) that I can use during registration to hide the "Save to another device" option? Did I miss any configuration in the registration request (e.g., authenticatorAttachment or other properties) that forces the flow to use only the current device’s platform authenticator? Are there any system-level constraints or WebAuthn standards I’m overlooking that cause the "Save to another device" option to persist during registration? Any insights or code examples would be greatly appreciated!

When an app is trying to access identities put in the keychain by cryptotokenkit extension, the user gets asked a permission pop-up which reads 'Token Access Request" would like access a token provided by: " with 2 options 'Don't allow' and 'OK' I accidently clicked "Don't allow" and now can't access identities put in crypto token kit. How can I reset the preference?

Hello, Thanks for the new video on Memory Integrity Enforcement! Is the presented app's sample code available (so that we can play with it and find & fix the bug on our own, using Soft Mode)? Thanks in advance!

I am using the CryptoKit SecureEnclave enum to generate Secure Enclave keys. I've got a couple of questions: What is the lifetime of these keys? When I don't store them somewhere, how does the Secure Enclave know they are gone? Do backups impact these keys? I.e. can I lose access to the key when I restore a backup? Do these keys count to the total storage capacity of the Secure Enclave? If I recall correctly, the Secure Enclave has a limited storage capacity. Do the SecureEnclave key instances count towards this storage capacity? What is the dataRepresentation and how can I use this? I'd like to store the Secure Enclave (preferably not in the Keychain due to its limitations). Is it "okay" to store this elsewhere, for instance in a file or in the UserDefaults? Can the dataRepresentation be used in other apps? If I had the capability of extracting the dataRepresentation as an attacker, could I then rebuild that key in my malicious app, as the key can be rebuilt with the Secure Enclave on the same device, or are there measures in place to prevent this (sandbox, bundle id, etc.)

Hi everyone, I’m looking for clarification on best practices for storing API keys in an iOS app — for example, keys used with RevenueCat, PostHog, AWS Rekognition, barcode scanners, and similar third-party services. I understand that hard-coding API keys directly in the app’s source code is a bad idea, since they can be extracted from the binary. However, using a .plist file doesn’t seem secure either, as it’s still bundled with the app and can be inspected. I’m wondering: What are Apple’s recommended approaches for managing these kinds of keys? Does Xcode Cloud offer a built-in or best-practice method for securely injecting environment variables or secrets at build time? Would using an external service like AWS Secrets Manager or another server-side solution make sense for this use case? Any insights or examples of how others are handling this securely within Apple’s ecosystem would be greatly appreciated. Thanks for considering my questions! — Paul

I’m implementing passkey registration and authentication in an iOS 17 app with a credential provider extension, but I’m running into an issue. Setup: I have a credential provider target configured. The app correctly shows the pop-up to register the passkey with my app. My Info.plist is set up properly. Issue: When the following function is triggered: override func prepareInterface(forPasskeyRegistration registrationRequest: ASCredentialRequest) { "code to generate registrationRequest..." let controller = ASAuthorizationController(authorizationRequests: [registrationRequest]) controller.delegate = self controller.presentationContextProvider = self controller.performRequests() } I get the following error: Domain=com.apple.AuthenticationServices.AuthorizationError Code=1004 I do not own the relying party domain (e.g., https://webauthn.io), so I cannot configure an apple-app-site-association file on the website. Question: How can I register and authenticate passkeys on any site that allows passkeys (such as webauthn.io) when I don’t control the webpage? Are there any workarounds or best practices for handling this in iOS 17? Any insights would be greatly appreciated!

I have filed bug reports on this to no avail, so I am bringing it up here hoping someone at Apple will address this. Since the first beta of 26.3, with voice control enabled there are now two icons in the menu bar (*plus an orange dot in full screen) that never go away. That orange microphone isn't serving its intended purpose to notify me that something is accessing my microphone if it is always displayed. I use voice control extensively, so it is nearly always on. In every prior version of macOS, the orange icon was not on for voice control. Even if voice control is not listening but simply enabled in system settings, the orange icon will be there. And there is no need for this icon to be on for a system service that is always listening. This orange icon in the menu bar at all times is incredibly irritating, as it takes up valuable space to the right of the notch, and causes other actual useful menu bar items to be hidden. As well, if some other application on my system were to turn on the mic and start recording me I would never know since that orange icon is always on. It also places an orange dot next to the control center icon taking up even more of the precious little menu bar real estate. Please fix this! Either exempt voice control (as Siri is always listening and it doesn't get the orange icon) or exempt all system services, or give me a way to turn this off. If you cannot tell, I find this incredibly annoying and frustrating.

In these threads, it was clarified that Credential Provider Extensions must set both Backup Eligible (BE) and Backup State (BS) flags to 1 in authenticator data: https://developer.apple.com/forums/thread/745605 https://developer.apple.com/forums/thread/787629 However, I'm developing a passkey manager that intentionally stores credentials only on the local device. My implementation uses: kSecAttrAccessibleWhenUnlockedThisDeviceOnly for keychain items kSecAttrTokenIDSecureEnclave for private keys No iCloud sync or backup These credentials are, by definition, single-device credentials. According to the WebAuthn specification, they should be represented with BE=0, BS=0. Currently, I'm forced to set BE=1, BS=1 to make the extension work, which misrepresents the actual backup status to relying parties. This is problematic because: Servers using BE/BS flags for security policies will incorrectly classify these as synced passkeys Users who specifically want device-bound credentials for higher security cannot get accurate flag representation Request: Please allow Credential Provider Extensions to return credentials with BE=0, BS=0 for legitimate device-bound passkey implementations. Environment: macOS 26.2 (25C56), Xcode 26.2 (17C52)

I am trying to setup remote Java debugging between two machines running macOS (15.6 and 26). I am able to get the Java program to listen on a socket. However, I can connect to that socket only from the same machine, not from another machine on my local network. I use nc to test the connection. It reports Connection refused when trying to connect from the other machine. This issue sounds like it could be caused by the Java program lacking Local Network system permission. I am familiar with that issue arising when a program attempts to connect to a port on the local network. In that case, a dialog is displayed and System Settings can be used to grant Local Network permission to the client program. I don't know whether the same permission is required on the program that is receiving client requests. If it is, then I don't know how to grant that permission. There is no dialog, and System Settings does not provide any obvious way to grant permission to a program that I specify. Note that a Java application is a program run by the java command, not a bundled application. The java command contains a hard-wired Info.plist which, annoyingly, requests permission to use the microphone, but not Local Network access.

Hello, I am using the prf extension for passkeys that is available since ios 18 and macos15. I am using a fixed, hardcoded prf input when creating or geting the credentials. After creating a passkey, i try to get the credentials and retrieve the prf output, which works great, but i am getting different prf outputs for the same credential and same prf input used in the following scenarios: Logging in directly (platform authenticator) on my macbook/iphone/ipad i get "prf output X" consistently for the 3 devices When i use my iphone/ipad to scan the qr code on my macbook (cross-platform authenticator) i get "prf output Y" consistently with both my ipad and iphone. Is this intended? Is there a way to get deterministic prf output for both platform and cross-platform auth attachements while using the same credential and prf input?

Why can’t sandboxed mac app store apps have full disk access available in the system settings for full disk access? I discovered mac app store apps in release mode cannot access the ai auggie command line program and other command line programs like opengrep on your system. Debug builds fine. I came up with a workaround: Since I have an ssh client built in for connecting to remote servers, why not connect to ssh on the same local machine… Ask the user for their username and password in a popup. To do this, you have to enable remote login on your mac in system settings -> sharing. In addition you must grant full disk access to cli ssh in system settings: add /usr/libexec/sshd-keygen-wrapper It all works, but I don’t see the cli program in mac settings. To remove the cli program you must run a command line program to remove all full disk access support from all apps. No way to just undo ssh. So my question is, even though I got CodeFrog all working for a mac app store release, should I not do it because it’s insecure or too complicated with the system settings? Should I instead sell the app off the store like Panic Nova? Need some advice. I have not implemented in app purchases yet. Should I just have a reality check and sell the app off the store, or try for app store approval? Bummer… Maybe I’m ahead of my time, but perhaps Apple could review the source code for apps requesting full disk access and make sure there’s nothing fraudulent in them. Then, developer tools app store apps could be in the store with the user’s assurance that nothing is happening behind the scenes that is scary. From: https://blog.greenrobot.com/2025/11/10/i-have-a-decision-to-make/ Related post: https://developer.apple.com/forums/thread/806187 I submitted a code level tech support question for this. They directed me here.

On iOS 26, QuickLookAR (ARQuickLookPreviewItem) shares the actual .usdz file via the system Share Sheet instead of the original website URL. This is a regression from iOS 17–18, where sharing correctly preserved and sent only the source URL. Repro steps: 1. Open a web-hosted USDZ model in QuickLookAR (Safari). 2. Tap Share. 3. Share via any messenger. 4. The full .usdz file is sent. Expected: Share Sheet sends only the original URL. Actual: Share Sheet sends the USDZ file. Impact: Uncontrolled distribution of proprietary 3D assets. Critical IP / data leak. Blocks production AR deployments relying on QuickLook. Environment: iOS 26.0–26.1, iPhone 14 / 15. Works as expected on iOS 17–18. Test case: https://admixreality.com/ios26/

Since Sun 15th Jun 04:30 (UTC+7) we received lots of following error that causes our device test failure. Could Apple please investigate further? ############################# Operations could not be completed. (com.apple.devicecheck.error error 4.) (serverUnavailable)

Hi, This issue is happening during Passkey creation. We’ve observed that approximately 1% of our customer users encounter a persistent error during Passkey creation. For the vast majority, the process works as expected. We believe our apple-app-site-association file is correctly configured, served directly from the RP ID over HTTPS without redirects, and is up-to-date. This setup appears to work for most users, and it seems the Apple CDN cache reflects the latest version of the file. To help us diagnose and address the issue for the affected users, we would appreciate guidance on the following: What tools or steps does Apple recommend to identify the root cause of this issue? Are there any known recovery steps we can suggest to users to resolve this on affected devices? Is there a way to force a refresh of the on-device cache for the apple-app-site-association file? Thank you in advance for any input or guidance.

Hey all, Question for the masses.... Does the Yubikey authentication have a OS dependency and it only works with a stable, public OS? Does Azure/Okta/Yubikey beta OS26? My CEO installed iPadOS 26 on his iPad and was not able to authenticate via Yubikey into our company environment. I ran the same scenario on my iPad using iPadOS 26 and I had the same results. Downgrading to iPAdOS doesn't pose these issues. I'm assuming something isn't fine-tuned yet?

Hi, We are implementing Platform SSO and using attestKey during registration via ASAuthorizationProviderExtensionLoginManager. Could you clarify whether the attestKey flow involves sending attestation data to an Apple server for verification (similar to App Attest in the DeviceCheck framework), or if the attestation certificate chain is generated and signed entirely on-device without any Apple server interaction? The App Attest flow is clearly documented as using Apple’s attestation service, but the Platform SSO process is less clearly described. Thank you.

Hi everyone, I'm currently working on a native macOS app (built with SwiftUI) and I'm trying to implement Password AutoFill functionality so users can use their saved credentials from Keychain or third-party password managers. I've gone through Apple's documentation, WWDC sessions, and sample code, but I've noticed that the resources primarily focus on iOS and web implementations. There's very limited guidance specifically for macOS. I've set up: Associated Domains entitlement with the webcredentials: service The apple-app-site-association file on my server TextField with .textContentType(.username) and SecureField with .textContentType(.password) However, I'm still not seeing the expected AutoFill behavior on macOS like I would on iOS. Has anyone successfully implemented Password AutoFill on a native macOS app? Are there any macOS-specific considerations or additional steps required that differ from iOS? Any guidance, sample code, or pointers to documentation I might have missed would be greatly appreciated.

Background We're building a macOS application that acts as a CryptoTokenKit software token. The architecture follows the documented pattern: a container app (a long-running agent process) manages token registration and identity updates via TKTokenDriverConfiguration, and a separate appex extension process handles the actual signing operations for client sessions. What we're doing At agent startup, the container app calls [TKTokenDriverConfiguration driverConfigurations] to obtain our token driver, then registers a token instance ID: NSDictionary<TKTokenDriverClassID, TKTokenDriverConfiguration *> *driverConfigurations = [TKTokenDriverConfiguration driverConfigurations]; TKTokenDriverConfiguration driver = / first value from driverConfigurations */; [driver addTokenConfigurationForTokenInstanceID:@"setoken"]; When the agent renews a certificate, it pushes updated TKTokenKeychainItem objects to ctkd by setting keychainItems on the TKTokenConfiguration: TKTokenConfiguration *tokenCfg = driver.tokenConfigurations[@"setoken"]; tokenCfg.keychainItems = updatedItems; This works correctly during normal operation. The failure When ctkd is restarted (e.g., killall ctkd, or the system restarts the daemon), all subsequent calls through the existing TKTokenDriverConfiguration reference silently fail. Specifically: [TKTokenDriverConfiguration driverConfigurations] returns the same stale object - it does not establish a new connection to the newly-started ctkd process. There is no error, no exception, and no indication the returned object is invalid. driver.tokenConfigurations[@"setoken"] still returns a non-nil value reflecting the pre-restart state - so any nil check intended to detect "token not registered with ctkd" does not fire. [driver addTokenConfigurationForTokenInstanceID:@"setoken"] appears to succeed (no error) but the token is not actually registered with the new ctkd instance. Setting tokenCfg.keychainItems = updatedItems appears to succeed but the new ctkd instance has no knowledge of the update. The only reliable recovery we've found is restarting the container app process itself, at which point [TKTokenDriverConfiguration driverConfigurations] returns a fresh object connected to the new ctkd instance. What we've investigated There is no public API on TKTokenDriverConfiguration to invalidate or refresh the internal XPC connection to ctkd TKTokenWatcher can observe token insertions/removals, but we found no documented way to use it to detect a ctkd process restart specifically The NSXPCConnection invalidation handler pattern is not accessible through the TKTokenDriverConfiguration abstraction Moving credential management into the appex extension. Since the appex extension is recreated when the ctkd process restarts, we are able to update keychainItems from the extension. However, this comes with it's own set of problems: the extension is ephemeral and using the keychain APIs directly from the extension is not well documented and does not appear to be a supported pattern. Questions Is there a supported API to detect that ctkd has restarted and that the existing TKTokenDriverConfiguration reference is no longer valid? Is there a supported way to obtain a fresh TKTokenDriverConfiguration without restarting the container app? Should the container app be re-architected to avoid holding long-lived TKTokenDriverConfiguration references?

Hi, We are using the MSAL library to authenticate users, with SSO authentication implemented through the Microsoft Authenticator app. The problem is that once or twice a day, a prompt for forced authentication appears, indicating that silent token acquisition is failing and resulting in a requirement for forced authentication. Below are some of the logs: ================================================= 2025-08-28 11:00:05.034 [Info] [AppDelegate.swift:121] application(:didFinishLaunchingWithOptions:) > MSAL message: TID=751353 MSAL 1.8.1 iOS 18.5 [2025-08-28 10:00:05 - EC9D1457-2D70-4878-926F-553391EBC9D3] [MSAL] Silent flow finished. Result (null), error: -51115 error domain: MSIDErrorDomain 2025-08-28 11:00:05.034 [Info] [AppDelegate.swift:121] application(:didFinishLaunchingWithOptions:) > MSAL message: TID=751353 MSAL 1.8.1 iOS 18.5 [2025-08-28 10:00:05 - EC9D1457-2D70-4878-926F-553391EBC9D3] [MSAL] acquireTokenSilent returning with error: (MSALErrorDomain, -50002) Masked(not-null) ==================================================== We initially raised this issue with Microsoft, but according to them: In the app's logs, the single one failure it contains, was when the SSO extension returned the error com.apple.AuthenticationServices.AuthorizationError, -6000 during a silent call. This error code is generated by the system framework (Apple), not by our code. It indicates that the framework encountered an unexpected internal issue before or after calling the SSO extension. MSAL returning interaction_required to the client app is the most effective way to recover from this error (as you mention, after the user selects the account the app continues working as expected). Additionally, as you also mention, the interactive call is made by switching to Authenticator (not displaying a "window" without leaving Eva Lite app), which means MSAL is not able to use the SSO extension and is using the fallback to legacy authentication. The recommended next step is for the customer to request support directly from Apple as this is an issue on their side. Additionally, the customer can also try to update to the latest iOS, in case Apple has already fixed this issue. ============================================= STEPS TO REPRODUCE There is no such steps its just that this is an enterprise application which is getting used on managed devices[iPhone 14]. The device are managed using some intune policy. Platform and Version: iOS Development Environment: Xcode 15, macOS 13.6.1 Run-time Configuration: iOS 18 Please let me know if there are any solutions to resolve this problem. Thank you.

Hello Team, We’ve recently started receiving reports from our customer base (Trellix) regarding issues with Full Disk Access (FDA) for Trellix binaries on macOS devices running Tahoe 26.1 (released on November 3, 2025). The issue occurs when users attempt to add Trellix CLI binaries under FDA to grant the required permissions; the binaries fail to appear under the FDA settings, even after selection. Upon further investigation, this appears to be a macOS 26.1–specific issue and not observed in earlier versions. Similar reports have been noted across various forums, indicating that the issue affects multiple binaries, not just Trellix: Some of the discussions on the same issue I see online. https://developer.apple.com/forums/thread/806187 https://developer.apple.com/forums/thread/806156 https://forum.logik.tv/t/macos-26-1-installation-issue-wait-before-updating/13761 https://www.reddit.com/r/MacOS/comments/1os1ph3/cant_add_anything_to_privacy_security_full_disk/ I have also logged FB21009024 for the same. We would like to understand when we can expect this to be fixed, since the issue persists even in 26.2 Beta and also whether the workaround of dragging and dropping the binaries can still be suggested?