Hello, is it anyone here ( or on this planet ) that can help with this issue on Catalina Mac OS 10.15.5 Beta 3 (19F72f).I am using MacBook Pro 16 inches. 😟

Hi! Just downloaded the IOS 26 beta software to my Iphone 15 128gb and during the second phase of installation of the update (when the phone start rebooting a few time) my iphone showed the display of low battery with the time displayed on the top left corner of the screen, even though my Iphone was pluged in during the full time of the install and had more than 50% of battery before launching the installation. So far-here is what i know: I wouldn't be able to confirm if the install was successfull or not i tried forced reboot a few time but i keep landing on the low battery page some other people are experiencing the same problem as i am as i could confirm on the reddit dedicated to the IOS26beta page

Hi everyone, We're facing an issue with Universal Links on iOS 18 and above. The problem seems related to how iOS handles redirects before reaching a Universal Link. ✅ Working Link (direct): When we open this direct Universal Link, the app opens as expected: 👉 https://dl.punchh.com/deeplinks/logansroadhouse/ ❌ Not Working (redirected link): This marketing/tracking link eventually redirects to the above Universal Link, but on iOS 18+, it opens the App Store or a browser instead of the app: 👉 https://ip2.loyalty.logansroadhouse.com/ls/click?upn=... The same redirect link works fine on iOS 17 and below — it opens the app.

Every time I go into the iOS software update settings to make sure my iPhone is fully updated to iOS 26, I keep getting an error message that says unable to check for update, an error occurred while checking for a software update. Please fix this bug?

Hi,Does anyone else encountered a delayed or unresponsive change when trying to change input languageon macos Sierra?Beta1 and 2 same problem.Working great on El Capitan.Thanks in advanced

Hello, I’m new to the Apple development community and I'm trying to post a question, but I keep getting this error: This post contains sensitive language. Please revise it in order to continue I've removed all links and rephrased the text, but the error persists. Has anyone seen this before or have suggestions for how I can successfully submit my question? Thank you!

After installing iOS 26 Developer Beta on my iPhone 13 mini, I encountered a critical battery issue. The battery percentage was stuck at 1%, and the phone could only be used while continuously plugged in. Despite the low reading, the device remained fully functional — I could use apps, navigate, and perform tasks normally. However, the battery indicator never rose above 1%, and the Battery Health section in Settings showed 0% Maximum Capacity, which is inaccurate. I did not allow the phone to fully discharge, out of fear that it might not turn back on. Restarting the phone and changing cables or chargers had no effect. After restoring the device to iOS 18.7.2 using DFU mode, the issue disappeared entirely — the battery percentage behaved normally again and the health section showed the correct value (about 100%). Observed behavior: • Battery percentage frozen at 1% • Maximum Capacity reported as 0% • Device only functional while connected to power • Issue resolved immediately after restoring to iOS 18 Temporary solution: A DFU restore to iOS 18 (18.5 22F76) immediately resolved the issue. The battery percentage and health readings returned to normal. Additional information: • Charger used: Official Apple 20W USB-C charger • Cable used: Apple USB-C to Lightning cable • Battery health after restore: 100% (replaced)

Hardware: • Mac Studio (M1 Ultra) • Apple Silicon • Sufficient free disk space (~35GB+ available) • SIP enabled • 4 local Time Machine snapshots present Current System: • Already running macOS Tahoe beta • Attempting upgrade to macOS Tahoe 26.4 Beta (Build 25E5207k) Primary Issue: Software Update downloads successfully, then moves to “Preparing…”. It stalls at “About 5 minutes remaining” for ~10–15 minutes and fails with: “Failed to prepare the software update. Please try again. An error occurred while downloading the selected updates.” The error appears network-related, but download always completes. Observed Behaviour: • “Checking for Updates” completes in <3 minutes. • softwareupdated and mobileassetd CPU usage <1%. • softwareupdate --history shows no record of the failed beta install. • No excessive system load or obvious disk pressure. Steps Already Attempted: 1. Standard Software Update retries • Multiple download/retry cycles from System Settings. • Same Preparing failure every time. 2. Permissions / Disk Access • Granted Terminal Full Disk Access. • SIP remains enabled. • Some system-protected locations still return “Operation not permitted”. 3. Cache / State Cleanup Attempts • Removed /Library/Updates/*. • Cleared temporary softwareupdate folders under /private/var/tmp. • Attempted MobileAsset cache cleanup where permitted. • Killed softwareupdated and mobileassetd processes (auto-restarted by launchd). 4. Beta Channel Reset • Turned Beta Updates OFF in System Settings. • Rebooted. • Re-enabled Beta Updates. • Forced catalog refresh via softwareupdate -l. 5. Snapshot Check • tmutil listlocalsnapshots / shows only 4 snapshots (normal range). 6. Full Installer Workaround softwareupdate --list-full-installers shows: • macOS Tahoe Beta 26.4 (25E5207k) • Tahoe 26.3 / 26.2 / 26.1 • Sequoia / Sonoma / Ventura / Monterey installers Downloaded installer via: softwareupdate –fetch-full-installer –full-installer-version 26.4 Installer downloaded correctly: /Applications/Install macOS Tahoe Beta.app 7. startosinstall Method (Apple Silicon optimized) Attempted install with: sudo “/Applications/Install macOS Tahoe Beta.app/Contents/Resources/startosinstall” –user –agreetolicense –nointeraction –forcequitapps –rebootdelay 30 –passprompt Authorization succeeds, installer begins preparing, but installation still ultimately fails. Additional Notes: • CPU usage remains low during failure. • No excessive snapshot count. • Error messaging consistently references download/network even though download completes. • Issue appears to occur during cryptex/asset preparation phase rather than initial download. Question for Apple / other developers: Has anyone else seen Tahoe 26.4 beta fail specifically during the Preparing phase on Apple Silicon (especially Ultra-class chips)? Looking for confirmation whether this is a known MobileAsset or cryptex staging issue, or if logs indicate a deeper APFS / volume-owner authorization problem.

I installed the latest build of Tahoe (25E5218f) yesterday on our test machine, an M1 Pro MacBook Pro and have been having a hard time getting my WiFi network to work. It's especially noticeable in Mail and Safari. Mail shows it can't connect to the designated server, and Safari simply can't connect to most sites. None of my other devices or computers are having problems, so I have to assume it's this last build that is the culprit. When I tether to my iPhone Air, everything pops back into place and I can access Mail and use Safari. I've reported the problem with FBA, but wanted to know if anyone else is experiencing the same thing.

Exercise caution applying Beta 2 on a Hermes Apple Watch. A number of anecdotes (including my own) that this causes very rapid battery drain, i.e. minutes, followed by a cycle of lower power mode, and very slow charge as battery drain seems as fast as charge so it tops out in low single digit %. Any interaction seems to cause the cycle to recur, rendering the watch in effect unusable. The connection to the phone is also broken, with the Watch app crashing after 1–2 seconds, 100% repeatably. This post is to caution avoidance, but a fix is going to be problematic if the watch can't get anywhere near 50% charge. The "anecdata" that this is widespread specifically with Hermes watches is: https://forums.macrumors.com/threads/watchos-26-beta-thread.2458443/page-5?post=33976625#post-33976625 And: https://www.reddit.com/r/watchOSBeta/comments/1lipud8/comment/mzh6ekt/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button Emailed through developer.apple.com with case ID 102630146259. Submitted feedback FB18336070 & FB18323575.

Hello, I noticed that on September 18, 2025, my Active Paid Subscriptions metric in App Store Connect suddenly dropped to 0 (-100%). However, my subscribers are still active and visible in RevenueCat and Superwall, which both confirm that users have not canceled their subscriptions. This makes me believe it is an App Store Connect reporting issue rather than an actual churn. Could you please confirm if this is a known data delay/bug, and let me know when the metric will be corrected? Thank you for your help

Both Apple and third-party apps in CarPlay are not displaying properly after updating to iOS 26 public beta two. I submitted feedback, wondering if anybody else had this problem and have solved it. The only apps that appear to be working normally are map apps like Apple Maps, Google Maps and Waze. The others show only background, but if you tap on the touchscreen it will perform an action as if the tile/link is there, but invisible

Hello, everyone, I hope you're all doing well. I'm facing an unfortunate issue with my Apple Developer Program membership that was suddenly terminated. I received a generic email from Apple, stating that my membership was revoked, but no specific reason was provided for this action. I appealed the decision, offering all possible explanations and commitments to adhere to guidelines, only to be met with a reply stating that the decision is "final" and no subsequent appeals will be processed. Has anyone here faced a similar situation? Are there any steps that can be taken to understand the reason for termination when Apple doesn't disclose it? Is there a way to open a dialogue with Apple, even when they've stated that their decision is final? Would publicizing this issue through social media or blogs be advisable? This is a particularly trying time for us, as we are recovering from a recent earthquake and our app is our sole source of income. Any insights, advice, or shared experiences would be greatly appreciated. Thank you for taking the time to read my post. We don't violate any apple's policies... any information would be welcome. Best regards,

After installing macOS Tahoe26.0 beta5 (25A5338b) or beta4, a memory and disk leak appears, likely caused by Spotlight indexing. The mds_stores process consumes up to 60 GB of RAM, while disk writes continue until an additional 50 GB is filled. Once the maximum is reached, the system frees the space and the cycle repeats, leading to severe memory leakage. In the available space, system data occupies as much as 150 GB. System Versions Affected: macOS Tahoe26.0 beta5 (25A5338b) and beta4. Reproduction Steps: Occurs immediately after booting up, with no additional user actions. Workaround: Booting into Safe Mode prevents the issue from occurring. Possible Cause: A bug in Spotlight indexing. In Safe Mode, Launchpad cannot search for applications, and no other issues have been observed so far. This strongly suggests that Spotlight indexing is the root cause. Potentially Affected Software: Developer-related tools such as Node.js, Maven, Vue.js, etc. It is possible that Spotlight is indexing developer project dependency directories (e.g., node_modules), which contain a large number of small files that do not require indexing, leading to this problem.

I've been trying to add my bank info to my account on AppStore connect, but nothing seems to work. Even searching for my bank does not work for me. Even tried searching for any other bank does not work. Keeps giving error messages. Anyone else experiencing this issue?

Hi everyone, I purchased an Apple Developer Program membership about three days ago. The payment has already been successfully charged to my bank account, but my account is still showing the status “Pending” with the message “Subscribe your membership.” I haven’t received any confirmation email or any request for additional information since completing the purchase. I’m curious if others have experienced a similar delay recently, and how long it took before your developer account was fully activated. Any insights or experiences would be greatly appreciated. Thanks in advance!

My app works perfectly the first time it is used but when returning to the start after playing the game and playing another it does some random things. I figure it is because the app still retains the previous game in it’s memory allocation? My question is, what is the best way programmatically to have an app start fresh and not have to quit it and open it again?

That time of year again. I’ve tried multiple restarts, and it still won’t load. I’m not sure if/how to remove the beta profile at this point (that seems to have worked for previous betas), given that the beta settings are hidden.

Hey everyone, I’m new to here and have very basic Knowledge so was hoping one of you geniuses could help me. I have had my devices hacked into remotely and monitored remotely for a number of weeks now. I have done all the security measures including erasing, new phone, sim, Vpns etc and still have the issue of my phone network being accessed. I believe code has been added to my phone or apps but I just don’t know what it looks like. I was hoping someone could take a look at some code for me and help me work it out as it has been driving me nuts. im not sure if I can post this on here so apologies if I offend anyone by doing so but I would be ever so grateful of some help. Thank you. Paul

Hello everyone, on August 31st, all the apps in my personal developer account were suddenly expired and deleted, I have not received any response from Apple. My apps are in compliance with Apple's policies. I then uploaded a new version and sent it to the review team, but I received the following error "There was an error processing your request. Please try again later." I have contacted Apple via Email and Phone but no one cares about my problem. Has anyone had the same situation as me, I am really worried.