Hi First, I hope I'm in the right place, I'm not certain. I'm having my first attempt at IOS development and want to see the progress I've made on my phone. I plugged it in to my Mac and selected it as a preview device and got the following messages in the Signing & Capabilities screen: Your team has no devices from which to generate a provisioning profile. Connect a device to use or manually add device IDs in Certificates, Identifiers & Profiles. https://developer.apple.com/account/ No profiles for '...' were found: Xcode couldn't find any iOS App Development provisioning profiles matching '...'. My account and personal team are shown in the Xcode settings, but it says 0 Provisioned Devices. I also tried restarting, and enabled developer mode on the phone. I checked the provided link, but saw nowhere to add a device ID. Clearly I don't understand what I'm doing. Can anyone help me make sense of this?

Hello everyone, I am developing a Flutter iOS application that includes a Widget Extension + Live Activity (ActivityKit). The project runs successfully on the iOS simulator when launched directly from Xcode, but it cannot be signed properly via Flutter and I cannot upload the build to App Store Connect due to the following CodeSign error: Command CodeSign failed with a nonzero exit code Provisioning profile "…" doesn't include the entitlement: com.apple.developer.activitykit.allow-third-party-activity This error never goes away no matter what I try. And the main problem is that my App ID does NOT show any ActivityKit or Live Activity capability in the Apple Developer portal → Identifiers → App ID. So I cannot enable it manually. However: Xcode requires this entitlement Flutter requires this entitlement When I add the entitlement manually in the .entitlements file, Xcode says: “This entitlement must be enabled in your Developer account. It cannot be added manually.” So I am stuck in a loop where: Apple Developer portal does not show ActivityKit capability Xcode demands the ActivityKit entitlement Signing fails App Store upload fails And Live Activity is a critical feature of my app What I have already done ✔ “Automatically manage signing” is enabled ✔ Correct Team is selected for both Runner and the Widget Extension ✔ Bundle IDs are correct: com.yksbuddy.app com.yksbuddy.app.TimerWidgetExtension ✔ Deleted Derived Data completely ✔ Tried removing all ActivityKit-related entitlement keys manually ✔ Deleted Pods, reinstalled, rebuilt ✔ App Group settings match between Runner and Extension ✔ The same Live Activity code works perfectly in a clean Xcode-only project ✔ But fails only inside a Flutter project structure ✔ Xcode builds & runs on simulator, but App Store upload always fails due to missing entitlement Core Problem: In my Apple Developer “Identifiers → App ID” page, the Live Activity / ActivityKit capability does NOT appear at all, so I cannot enable: Live Activities ActivityKit Third-party activity entitlement Without being able to enable this capability, I cannot create a valid provisioning profile that includes: com.apple.developer.activitykit.allow-third-party-activity Flutter + Xcode insists this entitlement must exist, but Apple Developer portal does not give any option to enable it.

Today, I used xcrun notarytool submit to upload my packaged Electron app for macOS—once as a .zip file and once as a .dmg—for Apple notarization. However, both submissions have been stuck at "Current status: In Progress" for several hours now. I’ve also checked the status using xcrun notarytool info, and it keeps returning status: In Progress. Could someone please help me understand what might be going wrong? This is quite urgent—if a technical support engineer or anyone from the team could take a look, I’d be glad to provide the UUIDs of my notarization requests.

Hey there, I'm experiencing an issue with notarization of my macOS application, which is blocking a release. We have signing/notarization hooked up to our CI process, both for prior releases as well as development builds (at the trunk tip). The notarization process has typically taken anywhere from a few minutes to a few tens of minutes, but for our most recent release, it's taking an unreasonably long time. I've compiled the submission info for each build (+ reattempted notarizations) below. What's interesting is that the oldest one was accepted- however, it timed out our CI process, so we never actually released it. Subsequent builds are more or less identical in terms of their content, however, they've been stewing in the notarization process for over 13 hours in some cases. % xcrun notarytool info 67413dae-64f5-4372-972d-e0ac158e18e3 Successfully received submission info createdDate: 2025-04-02T16:28:25.999Z id: 67413dae-64f5-4372-972d-e0ac158e18e3 name: Warp Vault.app.zip status: In Progress % xcrun notarytool info 0c72b243-4a8d-4976-a97b-75689d7e2497 Successfully received submission info createdDate: 2025-04-02T05:49:05.861Z id: 0c72b243-4a8d-4976-a97b-75689d7e2497 name: Warp Vault.app.zip status: In Progress % xcrun notarytool info 8e2edfc2-58bc-4b33-bc8e-078155759a81 Successfully received submission info createdDate: 2025-04-02T05:23:28.870Z id: 8e2edfc2-58bc-4b33-bc8e-078155759a81 name: Warp Vault.app.zip status: In Progress % xcrun notarytool info 8fb17b0c-ace4-4b6f-bef8-68d22696814d Successfully received submission info createdDate: 2025-04-02T05:07:48.187Z id: 8fb17b0c-ace4-4b6f-bef8-68d22696814d name: Warp Vault.app.zip status: Accepted At the time of checking, the UTC date was: % TZ="UTC" date Wed Apr 2 18:42:14 UTC 2025 It's interesting to me that the notarization process is taking this long. We've notarized many development builds (with debugging flags enabled) in the time between our last public release and our attempt to notarize this one. What's more, the original build for this release was notarized within the span of about 15 minutes, but subsequent submissions of the same build have hung for tens of hours. My two questions are: How can I get our pending notarizations "unstuck"?, and To prevent these types of hangs in the future, should I also routinely build/sign/notarize non-debug builds of my application during the development process? Best regards and many thanks, Charlton

Is the Notary service unavailable again? The system-status page shows it as being green but I am back to receiving the same error as previously which fixed itself once the notary service went green again and I am unable to notarize and staple my Distribution PKG.

I have a free developer account, and I have been creating applications. When I tried to open one of them, it said that this app has been flagged as malware. It is not malware, so I don't know why it has been flagged as this. Not just this app, but suddenly a whole bunch of my apps have been flagged as malware as well! The app I have been developing is basically a windows Taskbar for my macbook air, and it has been working well until the latest update i made where it hides in full screen, suddenly it started taking up significant energy, so i reverted to an older version while i was fixing it. Then, when i try to open it another time, it starts to open, and it says "Malware Blocked and Moved to Bin" “Taskbar.app” was not opened because it contains malware. This action did not harm your Mac”. All versions of the taskbar now contain this message. I try opening some of my other apps, a shared storage client and a shared storage server (where i was testing with app groups), and they couldn't open either, the same malware message appeared. ProPermission couldn't open either (changes permissions on files for me so i don't have to use the terminal or finder). I can run these apps through the Xcode environment (attached process), but when I archieve it into an app bundle, the malware flag appears. Please note that I am certain that these apps do not contain malware, apparently XProtect has incorrectly flagged my apps as malware. Because I do not have the paid developer account, I cannot notarize my apps. I am using MacOS Tahoe 26.1 with Xcode 26.0, and I have tested it with a iMac Intel 2017 with MacOS Ventura.

Hi all, I'm a solo iOS developer trying to update an app I released in 2010. My current Team ID is Q37598Q8GE, but the app's original App ID uses an old prefix, YHX995W43P. When I try to create a new App ID with the original Bundle ID (eu.andela.woordenes) to generate a new distribution provisioning profile, I get the error:An attribute in the provided entity has invalid value An App ID with Identifier 'eu.andela.woordenes' is not available. Please enter a different string. I understand this might be due to the old prefix from pre-2011, when Apple allowed multiple prefixes per account. I still have access to the app in App Store Connect and want to push an update, not create a new app. How can I resolve this?Can I reuse the existing App ID (eu.andela.woordenes with prefix YHX995W43P) for a new provisioning profile, or do I need to match my current Team ID (Q37598Q8GE)? If the Bundle ID is already taken by my current app, how do I update the app without changing the Bundle ID? Any steps to fix the prefix mismatch in Xcode or App Store Connect?

I am currently having issues uploading my app to appstoreconnect.apple.com/notary/ for notarization. It times out after hanging for a while. I get the following error. 13:42:04 "LocalDataTask <D84AED32-B05B-4439-8BDC-40C0F89B89F1>.<1>" 13:42:04 ), NSLocalizedDescription=The request timed out., NSErrorFailingURLStringKey=https://appstoreconnect.apple.com/notary/v2/asp?, NSErrorFailingURLKey=https://appstoreconnect.apple.com/notary/v2/asp?, _kCFStreamErrorDomainKey=4})

During the release of our macOS App, we encountered the following issue: We need to support dynamic code loading of WebAssembly (wasm) inside our App, mainly by loading WebAssembly (wasm) binary modules. We discovered a problem: a wasm file is neither an executable nor a bundle, so it cannot be code-signed. Since our App needs to pass notarization, we have not set the com.apple.security.cs.allow-unsigned-executable-memory entitlement. Without setting com.apple.security.cs.allow-unsigned-executable-memory, loading a wasm module results in an “unsigned code” error that causes the process to crash. Could you please advise on what we should do to avoid this problem? Is it possible to apply for a special entitlement to allow com.apple.security.cs.allow-unsigned-executable-memory?

Hi, after 2 years of not updating my app on appstore i wanted to submit an update for my iOS app which also containts a watch app target. When i try to submit it to upload it i get the following errors: Failed registering bundle identifier The app identifier "(myappBundleID).watchkitapp" cannot be registered to your development team because it is nit available. Change your bundle identifier to a unique string to try again. No Profiles for "(myappBundleID).watchkitapp" were found. Xcode culdn't find any iOS App Store provisining profiles matching "(myappBundleID).watchkitapp" Since i have my app already in store with that bundle identifier i don't know why it can not be registered to my team. Also i don't want to change the bundle identifier because then i can not publish it as update to store.

Hello Apple Support, While attempting to staple a notarization ticket for our signed installer package, the stapler command fails with Error 65. Upon investigation, we found that connections to oscdn.apple.com present an SSL certificate issued to a248.e.akamai.net, which does not include oscdn.apple.com in its Subject Alternative Name (SAN). This mismatch prevents our macOS environment from validating tickets and completing the stapling process. Steps tried: Verified notarization status (Accepted). DNS flushed, tried different DNS (8.8.8.8, 1.1.1.1). curl to oscdn.apple.com consistently fails with SSL error 60. Please advise on resolving this certificate mismatch. also when I try to run the stapler command with my pkg "xcrun stapler staple/Users/mactest/Desktop/IPMPlus_Macos_Installer.signed.pkg" getting the output like :- Processing: /Users/mactest/Desktop/IPMPlus_Macos_Installer.signed.pkg Could not validate ticket for /Users/mac-test/Desktop/IPMPlus_Macos_Installer.signed.pkg The staple and validate action failed! Error 65. please help Thank you.

I’m unable to notarize the executable and the .app — the status has been showing “In Progress” for over an hour. Upon checking the xcrun logs, it indicates that the submission ID was not received. I also noticed there’s an Apple Developer Service outage reported since October 8, 2025. Could you please let me know when this outage is expected to be resolved? It would be very helpful.

Hello, I am trying to publish a simple app to the App Store for the first time, and I am getting these 2 errors. Please note the knowledge base URLs shown in the screenshot are not clickable. I think this should be addressed. Any guidance on how to correct these issues will be greatly appreciated. Sincerely, Anis

The device UDID was registered to the developer account 40 hours ago, the STATUS column was "processing" in the first 24 hours, then turned to empty. But I still can't run my app (with distribution method "development"), when I try to run it after download it through my OTA URL, it prompts “the app cannot be installed because its integrity could not be verified” but everything runs good on a iPhone which was registered a month ago. What should I do now? keep waiting?

I am receiving an entitlement error from stripe terminal SDK when integrating Tap to Pay from apple in the info.plist. Im hoping that someone can give me their input on my error output rather than diving into the stripe sdk to point me in the right direction of something I may have missed with entitlements. I have been approved for tap to pay entitlement and am following the instructions here from apple: https://developer.apple.com/documentation/proximityreader/setting-up-the-entitlement-for-tap-to-pay-on-iphone com.apple.developer.proximity-reader.tap-to-pay

My app uses a Provisioning Profile (as it bundles up a Network System Extension). I do not use "Automatically manage signing" as its causes code signing/deployment issues 🤷‍♂️ In Xcode (version 26), if I enable " Enhanced Security" and check "Enable Hardware Memory Tagging", Xcode states: Provisioning profile "<>" doesn't include the com.apple.security.hardened-process.checked-allocations and com.apple.security.hardened-process.checked-allocations.soft-mode entitlements. Normally to resolve such errors one simply adds the Capability in "Edit your App ID Configuration" and then regenerates the Provisioning Profile. However, I don't see any such capability to would add these entitlements? (I thought "Hardened Process" would be the one - but alas, no). Clicking the "for more information" link in Xcode to view the relevant(?) "Apple Developer Documentation" generates another error 😵‍💫 Didn't see anything in: https://developer.apple.com/documentation/xcode/enabling-enhanced-security-for-your-app

Background We are using a Developer ID application certificate to sign our application. We lost the private key and we need to revoke it before we can receive a new one. Per documentation (https://developer.apple.com/support/certificates/), I know that previously installed applications will still be able to run, but new installations will not be able to work. I want to confirm what will happen when we revoke the certificate so we know how to prepare customers for this upcoming change. Questions Will existing installations of the application receive a notice that the certificate has been revoked? Will previously installed applications be able to launch again after they are closed? What will the user see when they try to install the application with the revoked certificate?

Hi, I just released a new version of an app that was transferred from another developer account. The previous version of this app used the App Groups feature to store some important data, and I would like to retrieve that data. In the new version, I’m using the same bundle identifier and the same App Group ID (which has already been deleted from the original developer account). I also added the App Groups entitlement in the project settings and set the same App Group ID. However, I still cannot access the data in the App Group. From the documentation and issues I’ve found, it seems that an app should still have permission to access the same App Group after being transferred. Did I miss something? Thanks!

Hey, Just recently I realized something I have been overlooking in my build pipelines. I thought that by adding the the "hardened runtime", I disable 3rd-party library injection (I do not have the disable-library-validation entitlement added). However, I was using some checks on my code and I noticed that the "library validation" code signature check fails on my applications (e.g. adding the .libraryValidation requirement via the LightweightCodeRequirements framework) - with codesign -dvvvv /path/to/app I can check it doesn't have the CS_REQUIRE_LV flag: [...] CodeDirectory v=20500 size=937 flags=0x10000(runtime) hashes=18+7 location=embedded [...] then I used in Xcode the "Other Code Signing Flags" setting and added the -o library option, which added the flag: [...] CodeDirectory v=20500 size=937 flags=0x12000(library-validation,runtime) hashes=18+7 location=embedded [...] Is this flag something I should be explicitly setting? Because I was under the impression enabling hardened runtime would be enough. Popular Developer ID distributed applications (e.g. Google Chrome, Parallels Desktop, Slack) all have this flag set.

Hi - appreciate your help in advance! Building a simple habit tracking app. I got approval for FamilyControls distribution. After creating a new provisioning profile with those capabilities enabled, when I try and build in xcode (16.4) using that Profile I get an error stating: "Provisioning profile "CreateMoreFamilyControlsv2" doesn't include the com.apple.developer.deviceactivity and com.apple.developer.deviceactivity.reporting entitlements" I've confirmed bundle identifier matches, Team etc Similarly when i do automatic signing see 3rd screenshot. Not sure what to do at this point, I've heard deviceActivity is automatically applied when family controls is approved but still running into this issue.