Hi everyone, I am new to Apply Pay, but I have already implemented IAP for subscriptions in my app. My app also has other functionalities, it also acts as a person-to-person marketplace, as users can post events or online courses which can be bought by other users to participate. My question is that I have read Apple's review guidelines but it is still unclear for me if I can use Apple Pay (with for example Stripe) or do I still need to use IAP for this online content. Also non profit organizations also can register which can recieve donations, can I also use Apple Pay for that or do I still need IAP there, because it would be nice if Apple would take 30% of donations.

Hi Team, For last 24 hours one of our team members is unable to login to apple dev portal due to two factor authentication not being sent. Error we are getting is "Verification codes can't be sent to this phone number at this time. Please try again later"

During the development of our 3D game project, we encountered high memory usage requirements. To address this, we enabled Apple’s Extended Virtual Addressing (EVA) and Increased Memory Limit services. We have confirmed that both services were enabled in the developer backend as well as in Xcode, and we also used updated development and distribution certificates when building the app. However, in our validation process, it seems that EVA and Increased Memory Limit are not taking effect — the game still experiences memory overflow and crashes. Could you please advise: The correct steps to properly use Extended Virtual Addressing and Increased Memory Limit; How we can confirm whether these services are functioning as expected?

Hi , This is regarding the ApplePayRecurringPayment Request and Apple Pay on Web functionality. Does Apple Pay on web providing functionality that collects payments from the stored credit card issuer bank (or) it only provides secured wallet functionality that provides a token which then has to be utilized to send a seperate payment request through a third party payment gateway to collect the payments from the credit card issuer bank. thanks

Hi everyone, I have a question regarding App Store approval. In my country, Apple In-App Purchases are not supported, so for users in unsupported regions we need to use a third-party payment provider. For countries where In-App Purchases are supported, we plan to use Apple IAP. Could you please advise on the correct approach to ensure the app complies with App Store guidelines and can be approved?

PNO: VISA Please help to tell the reason for error. Thanks a lot. Attached is the log for your investigation Apple Push Log.txt

Hi, I am the developer of this app and I was shared this receipt which strangely does not list my name as the merchant but instead says "The flow network" as you can see below: What is going on?

We are working with two types of wallet passes. Provisioning works successfully for one pass type via wallet extensions, but the same process is not functioning for the other. For the second pass type, we are able to generate the required data for pull provisioning and send it to Apple. Additionally, in-app push provisioning for this pass type completes without issue. We would appreciate guidance on how to further debug and resolve this provisioning problem.

I am trying to play around on the Apple Pay demo page (https://applepaydemo.apple.com) and I am getting the following error response. PaymentRequest AbortError: The operation was aborted. I am using the Payment Request API

Apple Sandbox is not available in India, also Apple Pay itself is not supported by Indian Banks. How can I still test using Apple Pay sandbox in India? I am trying to add test cards on my iPhone and it fails to add it. It tries to connect to Issuer, which it should not for sandbox Apple Id. Can anyone help how to achieve this?

We have an app that uses the pass-presentation-suppression entitlement and calls requestAutomaticPassPresentationSuppression to prevent the Wallet app from being presented when the device is displaying a barcode to a barcode/nfc reader. This works as expected for users of the standard Apple Wallet app. However, it does not prevent third-party wallet apps from being launched, which hides the barcode and prevents it from being scanned properly. What options do I have to prevent third-party wallet apps from launching or interfering while our app is actively presenting a barcode?

Cybersource production support has clarified issue as below "On the BAD Case, it seems that the Apple Payload did not contain the "onlinePaymentCryptogram" object within the JSON. The Cryptogram is critical and mandatory. Since the merchant cannot really control this, and since CYBS is just decrypting the payload and uses it, we cannot comment as to why it was missing. The merchant would need to reach out to Apple and/or decrypt the payment themselves locally to check if and why this data was not present, for troubleshooting purposes."

Hello! We are using "Apple Pay Web Merchant Registration API" https://developer.apple.com/documentation/applepaywebmerchantregistrationapi Recently we successfully updated the Payment/identity certificates at our main merchant ID And we have a few questions: Do we need make the Domain verification for all of our sub-merchants again after the Certificates update? How we can check the expiration of domain verification of merchants that we integrate trough API endpoint (https://apple-pay-gateway.apple.com/paymentservices/registerMerchant), and do verified domains via API have an expiration date??? How we can understand does the our universal domain verification file (apple-developer-merchantid-domain-association) have expiration too? Thanks in advance!

Hello, We’re seeing an issue where the Apple Pay button is visible in Safari but not clickable for certain users, while it works normally for others. This happens on our site (https://store-qa2.enphase.com/ ) as well as on other sites for the same affected users. Currently, we display the Apple Pay button based on the following condition: Boolean(window.ApplePaySession) && ApplePaySession.canMakePayments(); For affected users, the button shows up as expected, but it’s not interactive. All users (both affected and unaffected) are on the latest versions of Safari and macOS/iOS. Could someone clarify what additional conditions Safari/Apple Pay requires for the button to be fully functional? And under what circumstances could it be visible but not clickable?

Hi Team, I have merchant session object - {"epochTimestamp":1748333121032,"expiresAt":1748336721032,"merchantSessionIdentifier":"SSH7CCD205FEEDD45AD84B77374D098B335_916523AAED1343F5BC5815E12BEE9250AFFDC1A17C46B0DE5A943F0F94927C24","nonce":"2d18eab4","merchantIdentifier":"8535F497EC92999BAD63C6F213F0F32DEEB5DBF8A0A91007F6C1128537B6FB19","domainName":"f7071159c1tst-store.occa.ocs.oraclecloud.com","displayName":"DDF Test","signature":"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","operationalAnalyticsIdentifier":"DDF Test:8535F497EC92999BAD63C6F213F0F32DEEB5DBF8A0A91007F6C1128537B6FB19","retries":0,"pspId":"8535F497EC92999BAD63C6F213F0F32DEEB5DBF8A0A91007F6C1128537B6FB19"} After sending this to session.compleMerchant I am getting the invalid access error. Regards, Varsha

Our company sells insurance and we'd like to offer annual renewals via Apple Pay on the Web. Most of the docs seem to point towards using recurringpaymentrequest but this method required an amount value which would only be calculated at renewal time. It appears that Shopify is doing something akin to what we want where they do auto payments so my question is can we do annual payments with unknown renewal prices with Apple Pay for Web ? What we cannot do is show the renewal price like this as it being insurance is almost certain to change. This is our current code which works but won't get past the regulator. const applePayPaymentRequestAnnual = { countryCode: 'GB', currencyCode: 'GBP', supportedNetworks: ['visa', 'masterCard'], merchantCapabilities: ['supports3DS'], requiredBillingContactFields: ['postalAddress', 'email'], requiredShippingContactFields: ['phone'], recurringPaymentRequest: { paymentDescription: 'Annual Insurance Renewal', regularBilling: { label: 'Annual Renewal Premium', amount: price, paymentTiming: "recurring", recurringPaymentIntervalUnit: "year", recurringPaymentStartDate: year + "-" + month + "-" + day + "T00:00:00.000Z", type: 'final' }, managementURL: window.location.protocol + '//' + window.location.host + '/manage-policy', tokenNotificationURL: window.location.protocol + '//' + window.location.host + '/apple-pay-notifications' }, lineItems: [{ label: alabel, amount: price, }], total: { label: alabel, amount: price, type: "final" }, }

Hello, We are currently developing an application that uses the Host-based Card Emulation (HCE) entitlement to enable corporate access functionality. With this entitlement, we have successfully established HCE communication and can interact with our access control systems to unlock doors. Our question is related to improving the user experience: We would like this access functionality to work without requiring the app to be in the foreground, as this adds friction for users during entry. Specifically, we would like to know: Is it possible for our app to coexist with Apple Wallet as the default contactless app, so that: Our app handles NFC interactions for corporate access (e.g., opening doors). Apple Wallet remains the default for payments. If that coexistence is not possible, and our app is set as the default contactless app, Will the system still need to launch our app into the foreground to complete a transaction (e.g., to emulate the NFC card)? Or is there a way to trigger HCE responses in the background (e.g., using a background process or service extension)? Any guidance on how to configure the app for optimal background access behavior, while maintaining compatibility with Wallet, would be greatly appreciated. Thank you in advance.

We are integrating Apple Pay In-App Provisioning in our banking application using an external SDK. The provisioning flow works on the iOS Simulator (mock sheet appears), but fails on real devices via TestFlight with the error: internalInconsistency: "PKAddPaymentPassViewController can not be created" Environment: Xcode 16 iOS 18 Real device: iPhone (tested via TestFlight / Distribution build) Card network: Mastercard What we've verified: com.apple.developer.payment-pass-provisioning entitlement is set to YES in our .entitlements file The entitlement is confirmed present in our Development provisioning profile via security cms -D -i embedded.mobileprovision | grep payment-pass → returns <true/> PKAddPaymentPassViewController.canAddPaymentPass() returns true on the device The card is NOT already in Apple Wallet (0 local/remote Secure Element passes) All provisioning data is present and valid (encryptedPayload, authorizationCode, primaryAccountSuffix, cardholderName) The external SDK is configured successfully at app launch Diagnostic logs from TestFlight build: canAddPaymentPass: true Local SE passes: 0 Remote SE passes: 0 suffix: 6165 name: [redacted] encryptedPayload length: 1130 authCode length: 514 scheme: Mastercard Card already in Wallet: false Error: internalInconsistency("PKAddPaymentPassViewController can not be created") Testing matrix: Environment Result Simulator Mock sheet appears (not a real test) Device + Debugger attached PKAddPaymentPassViewController error Device + Debugger detached (Dev build) SDK error 903: "device environment unsafe" TestFlight (Distribution) PKAddPaymentPassViewController cannot be created Questions: Can PKAddPaymentPassViewController fail to be created even when canAddPaymentPass() returns true? What other conditions could cause this? Is there a way to verify that the Distribution provisioning profile correctly includes the payment-pass-provisioning entitlement after it has been approved by Apple? Are there any additional Apple Pay entitlements or configurations (e.g., Wallet merchant setup, pass type identifiers) required beyond com.apple.developer.payment-pass-provisioning for In-App Provisioning to work? Does regenerating the Distribution provisioning profile on Apple Developer Portal resolve cases where entitlements were added after the profile was originally created? Any guidance would be greatly appreciated. Thank you.

Hello, I am currently testing an Adyen integration with Sylius and need to verify Apple Pay with Cartes Bancaires in the sandbox environment. Could you please advise how Cartes Bancaires can be tested in Apple Pay Sandbox (e.g. cards details)? Thank you in advance for your guidance. Best regards, Grzegorz

Hello, Apologies if this has been asked before but I have a website that takes subscriptions and payments through PayPal. It's a platform where authors can sell ebooks and anyone who purchaes an ebook, the money goes pretty much directly from the buyer's PayPal to the seller PayPal through the use of PayPal Multiparty where my platform acts as a third party that takes a fee. I'm currently building a React-Native app for my website and coming close to needing to integrate payment solutions. As far as I'm aware, Apple only allows Apple Pay payments for IAP and subscriptions? How would this work for my model? Can I integrate PayPal into Apple Pay like I do with my website? If not, what's the alternative?