Explore the integration of media technologies within your app. Discuss working with audio, video, camera, and other media functionalities.

All subtopics
Posts under Media Technologies topic

Post

Replies

Boosts

Views

Activity

AVFoundationErrorDomain Code=-11819 in AVPlayer – Causes & Fixes?
We are encountering an issue where AVPlayer throws the error: Error Domain=AVFoundationErrorDomain Code=-11819 "Cannot Complete Action" > Underlying Error Domain[(null)]:Code[0]:Desc[(null)] This error seems to occur intermittently during video playback, especially after extended usage or when switching between different streams. We observe Error 11819 (AVFoundationErrorDomain) in Conviva platform that some of our users experience it but we couldn't reproduce it so far and we’re need support to determine the root cause and/or best practices to prevent it. Some questions we have: What typically triggers this error? Could it be related to memory/resource constraints, network instability, or backgrounding? Are there any recommended ways to handle or recover from this error gracefully? Any insights or guidance would be greatly appreciated. Thanks!
0
0
180
Apr ’25
AVAudioEngine failing with -10877 on macOS 26 beta, no devices detected via AVFoundation but HAL works
I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]
0
0
452
Jul ’25
How To Integrating iOS 26 Spatial Photos Feature into Third-Party iPhone App
Dear Apple Technical Support Team, Greetings! I am an iOS app developer, currently upgrading the functions of the photo app I developed Recently, I noticed the new Spatial Photos feature added in the iOS 26 system, which brings an immersive 3D photo experience to users. We hope to integrate similar capabilities into our own app to provide users with a richer photo viewing experience. Through technical research, we found that on Apple Vision devices, the similar spatial photo display effect can be achieved through the ImagePresentationComponent.Spatial3DImage interface. However, our tests show that this interface only supports visionOS and cannot be called in the iOS system. At present, iOS 26 already natively supports the Spatial Photos feature, and we hope to know how to enable third-party photo apps to also have this capability. Here, we sincerely request your team to provide relevant technical support, mainly to understand the following questions: Are there any official APIs, SDKs, or development frameworks applicable to the iOS 26 system that can support third-party apps to implement core functions such as the generation and display of spatial photos? If there are no public adaptive interfaces available at present, are there any other compliant technical solutions or alternative paths to achieve similar effects? For third-party apps to integrate the spatial photo feature, are there any relevant development documents, technical specifications, or review requirements that need to be followed? We have completed the basic function iteration of the app and have the technical capability to quickly adapt to new functions. We hope to receive guidance and support from your team to help us bring a better product experience to iOS users. Attached are the relevant information of our app and the detailed report on interface compatibility during the test for your reference. If you need any further supplementary information, please feel free to inform us. Thank you for reviewing this email in your busy schedule, and we look forward to your reply!
0
0
219
Jan ’26
AVExternalStorageDeviceDiscoverySession.isSupported returns true only on iPhone Pro models
I am developing an iOS camera app that can record video directly to external storage connected to an iPhone. To detect whether an external USB storage device is connected and to obtain its URL, I am considering using AVExternalStorageDeviceDiscoverySession. However, when checking support using AVExternalStorageDeviceDiscoverySession.isSupported, I observe that it returns true only on Pro model iPhones, and false on non-Pro models in my environment. I have reviewed Apple’s official documentation, but I could not find any clear description of the supported devices or requirements (for example, whether this API is limited to Pro models or requires specific hardware capabilities). I would appreciate any information regarding the following points: ●The actual requirements for AVExternalStorageDeviceDiscoverySession to be supported Device limitations (Pro vs non-Pro models) Hardware requirements (USB controller, external recording capability, etc.) iOS version dependencies ●Whether support for non-Pro models is planned in the future Tested environments iPhone 16 Pro (iOS 18.7.1) → isSupported == true iPhone 16e (iOS 26.2) → isSupported == false iPhone 17 (iOS 26.2) → isSupported == false iPhone Air (iOS 26.2) → isSupported == false If anyone has observed similar behavior or has official information from Apple regarding this API, I would greatly appreciate your insights.
0
0
156
Dec ’25
Corrupted image data when using QualityPrioritization.Quality on iPhone 17 Pro
Hey, I've noticed that in some scenarios photo data can be corrupted from the cameras on iPhone 17 Pro. The requirements are: The zoom level is greater than 2 times the base zoom, so 2x for the wide lens, and 8x for the telephoto. QualityPrioritization is set to .Quality. If set to .Balanced the images look as expected. The scene is well lit. I haven't managed to work out if there's an ISO cut off, but in darker scenes the images look as expected. The scene does not contain any objects or texture, e.g. a blank white screen, a blue sky, up close against a bright wall. Here is an example: This is really weird behavior. I have opened a ticket here: https://feedbackassistant.apple.com/feedback/22092908 There's also a repo here if anyone would like to try it: https://github.com/alexfoxy/CameraQualityTest. Thanks, Alex
0
0
100
3w
Unable to match music with shazamkit for Android
Hello, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this? Do i need to create a custom catalog?
0
0
144
May ’25
Error resuming background audio while connected to CarPlay
My app utilizes background audio to play music files. I have the audio background mode enabled and I initialize the AVAudioSession in playback mode with the mixWithOthers option. And it usually works great while the app is backgrounded. I listen for audio interruptions as well as route changes and I am able to handle them appropriately and I can usually resume my background audio no problem. I discovered an issue while connected to CarPlay though. Roughly 50% of the time when I disconnect from a phone call while connected to CarPlay I get the following error after calling the play() method of my AVAudioPlayer instance: "ATAudioSessionClientImpl.mm:281 activation failed. status = 561015905" If I instead try to start a new audio session I get a similar error: Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed} Like I said, this isn't reproducible 100% of the time and is so far only seen while connected to CarPlay. I don't think Im forgetting so additional capability or plist setting, but if anyone has any clues it would be greatly appreciated. Otherwise this is likely just a bug that I need to report to Apple. One very important note, and reason I believe it's just a bug, is that while I was testing I found that other music apps like Spotify will also fail to resume their audio at the same time my app fails. Another important detail is that when it works successfully I receive the audio session interruption ended notification, and when it doesn't work I only receive a route configuration change or route override notification. From there I am able to still successfully granted background time to execute code, but my call to resume audio fails with the above mentioned error codes.
0
0
317
Dec ’25
iOS Audio Routing - Bluetooth Output + Built-in Microphone Input
Hello! I'm experiencing an issue with iOS's audio routing system when trying to use Bluetooth headphones for audio output while also recording environmental audio from the built-in microphone. Desired behavior: Play audio through Bluetooth headset (AirPods) Record unprocessed environmental audio from the iPhone's built-in microphone Actual behavior: When explicitly selecting the built-in microphone, iOS reports it's using it (in currentRoute.inputs) However, the actual audio data received is clearly still coming from the AirPods microphone The audio is heavily processed with voice isolation/noise cancellation, removing environmental sounds Environment Details Device: iPhone 12 Pro Max iOS Version: 18.4.1 Hardware: AirPods Audio Framework: AVAudioEngine (also tried AudioQueue) Code Attempted I've tried multiple approaches to force the correct routing: func configureAudioSession() { let session = AVAudioSession.sharedInstance() // Configure to allow Bluetooth output but use built-in mic try? session.setCategory(.playAndRecord, options: [.allowBluetoothA2DP, .defaultToSpeaker]) try? session.setActive(true) // Explicitly select built-in microphone if let inputs = session.availableInputs, let builtInMic = inputs.first(where: { $0.portType == .builtInMic }) { try? session.setPreferredInput(builtInMic) print("Selected input: \(builtInMic.portName)") } // Log the current route let route = session.currentRoute print("Current input: \(route.inputs.first?.portName ?? "None")") // Configure audio engine with native format let inputNode = audioEngine.inputNode let nativeFormat = inputNode.inputFormat(forBus: 0) inputNode.installTap(onBus: 0, bufferSize: 1024, format: nativeFormat) { buffer, time in // Process audio buffer // Despite showing "Built-in Microphone" in route, audio appears to be // coming from AirPods with voice isolation applied - welp! } try? audioEngine.start() } I've also tried various combinations of: Different audio session modes (.default, .measurement, .voiceChat) Different option combinations (with/without .allowBluetooth, .allowBluetoothA2DP) Setting session.setPreferredInput() both before and after activation Diagnostic Observations When AirPods are connected: AVAudioSession.currentRoute.inputs correctly shows "Built-in Microphone" after setPreferredInput() The actual audio data received shows clear signs of AirPods' voice isolation processing Background/environmental sounds are actively filtered out... When recording a test audio played near the phone (not through the app), the recording is nearly silent. Only headset voice goes through. Questions Is there a workaround to force iOS to actually use the built-in microphone while maintaining Bluetooth output? Are there any lower-level configurations that might resolve this issue? Any insights, workarounds, or suggestions would be greatly appreciated. This is blocking a critical feature in my application that requires environmental audio recording while providing audio feedback through headphones 😅
0
0
220
May ’25
iOS 26 AVCaptureDevice continuousAutoFocus not working
Device: iPhone 16 Pro Max OS: iOS 26.0.1 AVCaptureDevice.DeviceType: builtInUltraWideCamera avtiveFormat: <AVCaptureDeviceFormat: 0x10ffb9ac0 'vide'/'420v' 1440x1080, { 1- 60 fps}, photo dims:{1440x1080,2016x1512}, fov:101.022, gdc fov:103.625, binned, max zoom:94.50 (upscales @1.40), system zoom range:1.0-3.0, AF System:1, ISO:15.0-3600.0, SS:0.000023-1.000000, system exposure bias range:-2.0-2.0, supports multicam, supports CS RoI, supports Smart Style, supports Smudge Detection> API: device.isFocusModeSupported(.continuousAutoFocus) == true setting: device.focusMode = .continuousAutoFocus setting is ok, but it's not working actually with continuousAutoFocus
0
0
109
Oct ’25
AVAudioEngine obtains channel audio data
Currently, I have successfully used ChannelMap to map hardware input channels and obtained audio data from the hardware device's MIC and OTG inputs. Additionally, I have used ChannelMap to map output channels to freely feed data for playback to each output channel. However, I now have a problem. I have a hardware device that only has output channels (no input channels), and the system has set this hardware device as the default playback device. In this case, how can I obtain the audio data being played to the output channels for modification?
0
0
288
Dec ’25
How to get a callback once a requested frameDuration change has been applied?
When changing a camera's exposure, AVFoundation provides a callback which offers the timestamp of the first frame captured with the new exposure duration: AVCaptureDevice.setExposureModeCustom(duration:, iso:, completionHandler:). I want to get a similar callback when changing frame duration. After setting AVCaptureDevice.activeVideoMinFrameDuration or AVCaptureDevice.activeVideoMinFrameDuration to a new value, how can I compute the index or the timestamp of the first camera frame which was captured using the newly set frame duration?
0
0
529
Aug ’25
MIDI output form Standalone MIDI Processor Demo App to DAW
I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }
0
0
520
Aug ’25
Background Upload Extension
Hello, We are trying to use the new Background Upload Extension to improve uploads of assets (Photos, Live Photos, Videos) in the background in our application. 1-The assets have finished uploading, but I'm unable to retrieve successful records using PHAssetResourceUploadJob.fetchJobs(action: .acknowledge, options: nil). When will the successful records be returned? 2-How to retrieve the system's pending tasks ? We want to cancel tasks handed over to the system when returning to the main app to avoid duplicate resource uploads. 3-When we set UploadJobExtensionEnabled = true, will tasks handed over to the system still execute after returning to the main app? Do we need to set UploadJobExtensionEnabled = false upon returning to the main app? If we set UploadJobExtensionEnabled = false, will previously submitted upload tasks be cleared?
0
0
133
Dec ’25
Number of songs in the Apple Music Feed
Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!
0
0
303
Aug ’25
WWDC25 Camera & Photos group lab summary (Part 1 of 3)
(Note: this is part 1 of a 3 part posting. See Part 2 or Part 3) At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for Camera & Photos. WWDC25 Camera & Photos group lab ran for one hour at 6 PM PST on Tuesday June 10th, 2025 Introductory kick-off questions Question 1 Tell us a little about the new AVFoundation Capture APIs we've made available in the new iOS 26 developer preview? Cinematic Capture API (strong/weak focus, tracking focus)(scene monitoring)(simulated aperture)(dog/cat heads/groupIDs) Camera Controls and AirPod Stem Clicks Spatial Audio and Studio Quality AirPod Mics in Camera Lens Smudge Detection Exposure and Focus Rect of Interest Question 2 I built QR code scanning into my app, but on newer iPhones I have to hold the phone very far away from the QR code, otherwise the image is blurry and it doesn't scan. Why is this happening and how can I fix it? Every year, the cameras get better and better as we push the state of the art on iPhone photography and videography. This sometimes results in changes to the characteristics of the lenses. min focus distance newer phones have multiple lenses automatic switching behavior Use virtual device like the builtInDualWide or built in Triple, rather than just the builtInWide Set the videoZoomFactor to 2. You're done. Question 3 Last year, we saw some exciting new APIs introduced in AVFoundation in the health space. With Constant Color photography, developers can take pictures that have constant color regardless of ambient lighting. There are some further advancements this year. Davide, could you tell us about them? constant color photography is mean to remove the "tone mapping" applied to photograph captured with camera app, usually incldsuing artistic intent, and instead try to be a close as possible to the real color of the scene, regardless of the illumination constant color images could be captured in HEIF anf JPEG laste year. this year we are adding Support for the DICOM medical imaging photo format. It is a fomrat used by the health industry to store images related to medical subjects like MRI, skin problems, xray and so on. It's writable and also readable format on all OS26, supported through AVCapturePhotoOutput APIs and through the coregraphics api. for coregrapphics there is a new DICOM entry in the property dictionary which includes all the dicom availbale and defined propertie in a file. finder will also display all those in the info panel (Address why a developer would want to use it) - not for regualr picture taking apps. for those HEIF and JPEG are the preferred delivery format. use dicom if your app produces output that are health related, that you can also share with health providers or your doctors Main session developer questions Question 1 LiDAR vs. Dual Camera depth generation: Which resolution does the LiDAR sensor natively have (iPhone 16 Pro) and when to prefer LiDAR over Dual Camera? Both report formats with output resolutions (we don't advertise sensor resolution) Lidar vs Dual, etc: Lidar: Best for absolute depth, real world scale and computer vision Dual, etc: relative, disparity-based, less power, photo effects Also see: 2022 WWDC session "Discovery advancements in iOS camera capture: Depth, focus and multitasking" Question 2 Can true depth and lidar camera run at 60fps? Lidar can do 30fps (edited) Front true depth can do 60fps. Question 3 What’s the first class way to use PhotoKit to reimplement a high performance photo grid? We’ve been using a LazyVGrid and the photos caching manager, but are never able to hit the holy trinity (60hz, efficient memory footprint, minimal flashes of placeholder/empty cells) use the PHCachingImageManager to get media content delivered before you need to display it specify the size you need for grid sized display set the options PHVideoRequestOptionsDeliveryModeFastFormat, PHImageRequestOptionsDeliveryModeFastFormat and PHImageRequestOptionsResizeModeFast Question 4 For rending live preview of video stream, Is there performance overhead from using async and Swift UI for image updates vs UIViewRepresentable + AVCaptureVideoPreviewLayer.self? AVCaptureVideoPreviewLayer is the most efficient display path Use VDO + AVSampleBufferDisplayLayer if you need to modify the image data Swift UI image is optimized for static image content Question 5 Is there a way to configure the AVFoundation BuiltInLiDarDepthCamera mode to provide a depth map as accurate as ARKit at close range? The AVCaptureDepthDataOutput supports filtering that reduces noise and fills in invalid values. Consider using this for smoother depth maps Question 6 Pyramid-based photo editing in core image (such as adobe camera raw highlights and shadows)? First off you may want to look a the builtin filter called CIHighlightShadowAdjust Also the noise reduction in the CIRawFilter uses a pyramid-based algorithm. You can also write your own pyramid-based algorithms by taking an input image: down sample it by two multiply times using imageByApplyingAffineTransform apply additional CIKernels to each downsampled image as needed. use a custom CIKernel to combine the results. Question 7 Is the best way to integrate an in-app camera for a “non-camera” app UIImagePickerController? Yes, UIImagePickerController provides system-provided UI for capturing photos and movies. Question 8 Hello, my question is on Deferred Photo Processing? Say I have a photo capture app that adds a CIFilter to the capture. How can I take advantage of Deferred Photo Processing? Since I don’t know how to detect when the deferred captured photo is ready CIFilter can be called on the final at that point Photo will have to be re-inserted into the Photo library as adjustment Question 9 For shipping photo style assets in the app that need transparency what is the best format to use? JPEG2000? will moving to this save a lot of space comapred to PNG or other options? If you want lossless compression PNG is good and supports unpremutiplied alpha If you want lossy compression HEIF supports premutiplied or unpremutiplied alpha (Note: this is part 1 of a 3 part posting. See Part 2 or Part 3)
0
0
535
Jul ’25
Potential Documentation Error in kAudioAggregateDevicePropertyTapList Sample Code
Hi, I believe I've found a potential error in the sample code on the documentation page for creating and using a process tap with an aggregate device. The issue is in the section explaining how to add a tap to the aggregate device. I have already filed a Feedback Assistant ticket on this (ID: FB17411663) but haven't heard back for months. Capturing system audio with Core Audio taps The sample code for modifying the kAudioAggregateDevicePropertyTapList incorrectly uses the tapID as the target AudioObjectID when calling AudioObjectSetPropertyData. // (Code to get the list and potentially modify listAsArray) if var listAsArray = list as? [CFString] { // ... (modification logic) ... // Set the list back on the aggregate device. <--- The comment is correct list = listAsArray as CFArray _ = withUnsafeMutablePointer(to: &list) { list in // INCORRECT: This call uses tapID as the target object. AudioObjectSetPropertyData(tapID, &propertyAddress, 0, nil, propertySize, list) } } The kAudioAggregateDevicePropertyTapList is a property that belongs to the aggregate device, not the individual tap. Therefore, to set this property, the AudioObjectSetPropertyData function must target the AudioObjectID of the aggregate device itself. Using tapID as the first argument is logically incorrect for this operation and will not update the aggregate device as intended. Furthermore, the preceding AudioObjectGetPropertyData call to fetch the list also appears to use the incorrect tapID as its target in the sample. The AudioObjectID for both getting and setting this property should be the ID of the aggregate device. _ = AudioObjectGetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, &propertySize, &list) _ = AudioObjectSetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, propertySize, newList) Thank you!
0
0
475
Sep ’25
After iPadOS 26 beta and iOS 26 beta, AVCaptureMetadataOutput no longer detects Face on some devices.
I'm creating an app that uses AVCaptureSession to pass camera input to AVCaptureMetadataOutput type set [metaout setMetadataObjectTypes:@[AVMetadataObjectTypeFace]] and scan Face. After updating to OS 26 Beta2 and iOS 26 Beta2, an issue has occurred where the delegate method of AVCaptureMetadataOutputObjectsDelegate is not called on some devices. The following devices are experiencing this issue. iPad (9th Gen) iPad air (4th Gen) iPhone 15 This issue has not occur on any other devices I have. I tried running the AVFoundation sample code on the Apple Developer site on the above device. The same problem still occurs. https://developer.apple.com/documentation/avfoundation/capture_setup/avcambarcode_detecting_barcodes_and_faces Are any additional settings required after OS 26 beta and iOS 26 beta? Or is there some problem on the OS side?
0
2
147
Jul ’25
Play Audio and Recognize Speech in Car
Hello, I'm trying to determine the best/recommended AVAudioSession configuration (i.e category, mode, and options) for the following use-case. Essentially, I'd like to switch between periods of playing an audio file and then recognizing speech. The audio file is typically speech and I don't intend for playback and speech recognition to occur simultaneously. I'd like for the user to sill be able to interact with Siri and I'd like for it to work with CarPlay where navigation prompts can occur. I would assume the category to use is 'playAndRecord', but I'm not sure if it's better to just set that once for the entire lifecycle, or set to 'playback' for audio file playback and then switch to 'playAndRecord' for speech recognition . I'm also not sure on the best 'mode' and 'options' to set. Any suggestions would be appreciated. Thanks.
0
0
607
Sep ’25
Capture session interrupted randomly
We are facing a strange issue where a small portion of our large userbase can not start the capture session in our app, as it gets interrupted with the following reason: AVCaptureSessionInterruptionReasonVideoDeviceNotAvailableWithMultipleForegroundApps Our users are all from iPhones, no one is using an iPad. Just to be sure we have set session.isMultitaskingCameraAccessEnabled = true but it does not seem to make any difference. Another weird interruption we are seeing
0
0
122
Jun ’25
How to mark Audio Unit as dirty (needing to be saved)
I'm working on a v2 Audio Unit that has some complicated internal state (audio, midi, other settings). When the internal state changes, I want to inform the host (f.i. Logic Pro) that my plugin state has changed, and that the main window should show the 'project changed' status through the window close button. This was easy to achieve for the VST version of the plugin, but I can't figure out a way to do it for the Audio Unit. I've tried: Notifying change of the kAudioUnitProperty_ClassInfo property that stores the plugin state: unit->PropertyChanged(kAudioUnitProperty_ClassInfo, kAudioUnitScope_Global, 0); Setting the kAudioUnitProperty_ClassInfo property value each time the plugin state changes. Adding a new parameter called 'dirtystate' and toggling it and notifying the change each time the plugin state changes. But nothing really make Logic take notice. This should be an easy task, but I can't put my finger on it. How do I flag may AUv2 as needing its status saved (i.e. the host project needs saving)?
0
0
157
Jan ’26
AVFoundationErrorDomain Code=-11819 in AVPlayer – Causes & Fixes?
We are encountering an issue where AVPlayer throws the error: Error Domain=AVFoundationErrorDomain Code=-11819 "Cannot Complete Action" > Underlying Error Domain[(null)]:Code[0]:Desc[(null)] This error seems to occur intermittently during video playback, especially after extended usage or when switching between different streams. We observe Error 11819 (AVFoundationErrorDomain) in Conviva platform that some of our users experience it but we couldn't reproduce it so far and we’re need support to determine the root cause and/or best practices to prevent it. Some questions we have: What typically triggers this error? Could it be related to memory/resource constraints, network instability, or backgrounding? Are there any recommended ways to handle or recover from this error gracefully? Any insights or guidance would be greatly appreciated. Thanks!
Replies
0
Boosts
0
Views
180
Activity
Apr ’25
AVAudioEngine failing with -10877 on macOS 26 beta, no devices detected via AVFoundation but HAL works
I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]
Replies
0
Boosts
0
Views
452
Activity
Jul ’25
How To Integrating iOS 26 Spatial Photos Feature into Third-Party iPhone App
Dear Apple Technical Support Team, Greetings! I am an iOS app developer, currently upgrading the functions of the photo app I developed Recently, I noticed the new Spatial Photos feature added in the iOS 26 system, which brings an immersive 3D photo experience to users. We hope to integrate similar capabilities into our own app to provide users with a richer photo viewing experience. Through technical research, we found that on Apple Vision devices, the similar spatial photo display effect can be achieved through the ImagePresentationComponent.Spatial3DImage interface. However, our tests show that this interface only supports visionOS and cannot be called in the iOS system. At present, iOS 26 already natively supports the Spatial Photos feature, and we hope to know how to enable third-party photo apps to also have this capability. Here, we sincerely request your team to provide relevant technical support, mainly to understand the following questions: Are there any official APIs, SDKs, or development frameworks applicable to the iOS 26 system that can support third-party apps to implement core functions such as the generation and display of spatial photos? If there are no public adaptive interfaces available at present, are there any other compliant technical solutions or alternative paths to achieve similar effects? For third-party apps to integrate the spatial photo feature, are there any relevant development documents, technical specifications, or review requirements that need to be followed? We have completed the basic function iteration of the app and have the technical capability to quickly adapt to new functions. We hope to receive guidance and support from your team to help us bring a better product experience to iOS users. Attached are the relevant information of our app and the detailed report on interface compatibility during the test for your reference. If you need any further supplementary information, please feel free to inform us. Thank you for reviewing this email in your busy schedule, and we look forward to your reply!
Replies
0
Boosts
0
Views
219
Activity
Jan ’26
AVExternalStorageDeviceDiscoverySession.isSupported returns true only on iPhone Pro models
I am developing an iOS camera app that can record video directly to external storage connected to an iPhone. To detect whether an external USB storage device is connected and to obtain its URL, I am considering using AVExternalStorageDeviceDiscoverySession. However, when checking support using AVExternalStorageDeviceDiscoverySession.isSupported, I observe that it returns true only on Pro model iPhones, and false on non-Pro models in my environment. I have reviewed Apple’s official documentation, but I could not find any clear description of the supported devices or requirements (for example, whether this API is limited to Pro models or requires specific hardware capabilities). I would appreciate any information regarding the following points: ●The actual requirements for AVExternalStorageDeviceDiscoverySession to be supported Device limitations (Pro vs non-Pro models) Hardware requirements (USB controller, external recording capability, etc.) iOS version dependencies ●Whether support for non-Pro models is planned in the future Tested environments iPhone 16 Pro (iOS 18.7.1) → isSupported == true iPhone 16e (iOS 26.2) → isSupported == false iPhone 17 (iOS 26.2) → isSupported == false iPhone Air (iOS 26.2) → isSupported == false If anyone has observed similar behavior or has official information from Apple regarding this API, I would greatly appreciate your insights.
Replies
0
Boosts
0
Views
156
Activity
Dec ’25
Corrupted image data when using QualityPrioritization.Quality on iPhone 17 Pro
Hey, I've noticed that in some scenarios photo data can be corrupted from the cameras on iPhone 17 Pro. The requirements are: The zoom level is greater than 2 times the base zoom, so 2x for the wide lens, and 8x for the telephoto. QualityPrioritization is set to .Quality. If set to .Balanced the images look as expected. The scene is well lit. I haven't managed to work out if there's an ISO cut off, but in darker scenes the images look as expected. The scene does not contain any objects or texture, e.g. a blank white screen, a blue sky, up close against a bright wall. Here is an example: This is really weird behavior. I have opened a ticket here: https://feedbackassistant.apple.com/feedback/22092908 There's also a repo here if anyone would like to try it: https://github.com/alexfoxy/CameraQualityTest. Thanks, Alex
Replies
0
Boosts
0
Views
100
Activity
3w
Unable to match music with shazamkit for Android
Hello, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this? Do i need to create a custom catalog?
Replies
0
Boosts
0
Views
144
Activity
May ’25
Error resuming background audio while connected to CarPlay
My app utilizes background audio to play music files. I have the audio background mode enabled and I initialize the AVAudioSession in playback mode with the mixWithOthers option. And it usually works great while the app is backgrounded. I listen for audio interruptions as well as route changes and I am able to handle them appropriately and I can usually resume my background audio no problem. I discovered an issue while connected to CarPlay though. Roughly 50% of the time when I disconnect from a phone call while connected to CarPlay I get the following error after calling the play() method of my AVAudioPlayer instance: "ATAudioSessionClientImpl.mm:281 activation failed. status = 561015905" If I instead try to start a new audio session I get a similar error: Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed} Like I said, this isn't reproducible 100% of the time and is so far only seen while connected to CarPlay. I don't think Im forgetting so additional capability or plist setting, but if anyone has any clues it would be greatly appreciated. Otherwise this is likely just a bug that I need to report to Apple. One very important note, and reason I believe it's just a bug, is that while I was testing I found that other music apps like Spotify will also fail to resume their audio at the same time my app fails. Another important detail is that when it works successfully I receive the audio session interruption ended notification, and when it doesn't work I only receive a route configuration change or route override notification. From there I am able to still successfully granted background time to execute code, but my call to resume audio fails with the above mentioned error codes.
Replies
0
Boosts
0
Views
317
Activity
Dec ’25
iOS Audio Routing - Bluetooth Output + Built-in Microphone Input
Hello! I'm experiencing an issue with iOS's audio routing system when trying to use Bluetooth headphones for audio output while also recording environmental audio from the built-in microphone. Desired behavior: Play audio through Bluetooth headset (AirPods) Record unprocessed environmental audio from the iPhone's built-in microphone Actual behavior: When explicitly selecting the built-in microphone, iOS reports it's using it (in currentRoute.inputs) However, the actual audio data received is clearly still coming from the AirPods microphone The audio is heavily processed with voice isolation/noise cancellation, removing environmental sounds Environment Details Device: iPhone 12 Pro Max iOS Version: 18.4.1 Hardware: AirPods Audio Framework: AVAudioEngine (also tried AudioQueue) Code Attempted I've tried multiple approaches to force the correct routing: func configureAudioSession() { let session = AVAudioSession.sharedInstance() // Configure to allow Bluetooth output but use built-in mic try? session.setCategory(.playAndRecord, options: [.allowBluetoothA2DP, .defaultToSpeaker]) try? session.setActive(true) // Explicitly select built-in microphone if let inputs = session.availableInputs, let builtInMic = inputs.first(where: { $0.portType == .builtInMic }) { try? session.setPreferredInput(builtInMic) print("Selected input: \(builtInMic.portName)") } // Log the current route let route = session.currentRoute print("Current input: \(route.inputs.first?.portName ?? "None")") // Configure audio engine with native format let inputNode = audioEngine.inputNode let nativeFormat = inputNode.inputFormat(forBus: 0) inputNode.installTap(onBus: 0, bufferSize: 1024, format: nativeFormat) { buffer, time in // Process audio buffer // Despite showing "Built-in Microphone" in route, audio appears to be // coming from AirPods with voice isolation applied - welp! } try? audioEngine.start() } I've also tried various combinations of: Different audio session modes (.default, .measurement, .voiceChat) Different option combinations (with/without .allowBluetooth, .allowBluetoothA2DP) Setting session.setPreferredInput() both before and after activation Diagnostic Observations When AirPods are connected: AVAudioSession.currentRoute.inputs correctly shows "Built-in Microphone" after setPreferredInput() The actual audio data received shows clear signs of AirPods' voice isolation processing Background/environmental sounds are actively filtered out... When recording a test audio played near the phone (not through the app), the recording is nearly silent. Only headset voice goes through. Questions Is there a workaround to force iOS to actually use the built-in microphone while maintaining Bluetooth output? Are there any lower-level configurations that might resolve this issue? Any insights, workarounds, or suggestions would be greatly appreciated. This is blocking a critical feature in my application that requires environmental audio recording while providing audio feedback through headphones 😅
Replies
0
Boosts
0
Views
220
Activity
May ’25
iOS 26 AVCaptureDevice continuousAutoFocus not working
Device: iPhone 16 Pro Max OS: iOS 26.0.1 AVCaptureDevice.DeviceType: builtInUltraWideCamera avtiveFormat: <AVCaptureDeviceFormat: 0x10ffb9ac0 'vide'/'420v' 1440x1080, { 1- 60 fps}, photo dims:{1440x1080,2016x1512}, fov:101.022, gdc fov:103.625, binned, max zoom:94.50 (upscales @1.40), system zoom range:1.0-3.0, AF System:1, ISO:15.0-3600.0, SS:0.000023-1.000000, system exposure bias range:-2.0-2.0, supports multicam, supports CS RoI, supports Smart Style, supports Smudge Detection> API: device.isFocusModeSupported(.continuousAutoFocus) == true setting: device.focusMode = .continuousAutoFocus setting is ok, but it's not working actually with continuousAutoFocus
Replies
0
Boosts
0
Views
109
Activity
Oct ’25
AVAudioEngine obtains channel audio data
Currently, I have successfully used ChannelMap to map hardware input channels and obtained audio data from the hardware device's MIC and OTG inputs. Additionally, I have used ChannelMap to map output channels to freely feed data for playback to each output channel. However, I now have a problem. I have a hardware device that only has output channels (no input channels), and the system has set this hardware device as the default playback device. In this case, how can I obtain the audio data being played to the output channels for modification?
Replies
0
Boosts
0
Views
288
Activity
Dec ’25
How to get a callback once a requested frameDuration change has been applied?
When changing a camera's exposure, AVFoundation provides a callback which offers the timestamp of the first frame captured with the new exposure duration: AVCaptureDevice.setExposureModeCustom(duration:, iso:, completionHandler:). I want to get a similar callback when changing frame duration. After setting AVCaptureDevice.activeVideoMinFrameDuration or AVCaptureDevice.activeVideoMinFrameDuration to a new value, how can I compute the index or the timestamp of the first camera frame which was captured using the newly set frame duration?
Replies
0
Boosts
0
Views
529
Activity
Aug ’25
MIDI output form Standalone MIDI Processor Demo App to DAW
I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }
Replies
0
Boosts
0
Views
520
Activity
Aug ’25
Background Upload Extension
Hello, We are trying to use the new Background Upload Extension to improve uploads of assets (Photos, Live Photos, Videos) in the background in our application. 1-The assets have finished uploading, but I'm unable to retrieve successful records using PHAssetResourceUploadJob.fetchJobs(action: .acknowledge, options: nil). When will the successful records be returned? 2-How to retrieve the system's pending tasks ? We want to cancel tasks handed over to the system when returning to the main app to avoid duplicate resource uploads. 3-When we set UploadJobExtensionEnabled = true, will tasks handed over to the system still execute after returning to the main app? Do we need to set UploadJobExtensionEnabled = false upon returning to the main app? If we set UploadJobExtensionEnabled = false, will previously submitted upload tasks be cleared?
Replies
0
Boosts
0
Views
133
Activity
Dec ’25
Number of songs in the Apple Music Feed
Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!
Replies
0
Boosts
0
Views
303
Activity
Aug ’25
WWDC25 Camera & Photos group lab summary (Part 1 of 3)
(Note: this is part 1 of a 3 part posting. See Part 2 or Part 3) At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for Camera & Photos. WWDC25 Camera & Photos group lab ran for one hour at 6 PM PST on Tuesday June 10th, 2025 Introductory kick-off questions Question 1 Tell us a little about the new AVFoundation Capture APIs we've made available in the new iOS 26 developer preview? Cinematic Capture API (strong/weak focus, tracking focus)(scene monitoring)(simulated aperture)(dog/cat heads/groupIDs) Camera Controls and AirPod Stem Clicks Spatial Audio and Studio Quality AirPod Mics in Camera Lens Smudge Detection Exposure and Focus Rect of Interest Question 2 I built QR code scanning into my app, but on newer iPhones I have to hold the phone very far away from the QR code, otherwise the image is blurry and it doesn't scan. Why is this happening and how can I fix it? Every year, the cameras get better and better as we push the state of the art on iPhone photography and videography. This sometimes results in changes to the characteristics of the lenses. min focus distance newer phones have multiple lenses automatic switching behavior Use virtual device like the builtInDualWide or built in Triple, rather than just the builtInWide Set the videoZoomFactor to 2. You're done. Question 3 Last year, we saw some exciting new APIs introduced in AVFoundation in the health space. With Constant Color photography, developers can take pictures that have constant color regardless of ambient lighting. There are some further advancements this year. Davide, could you tell us about them? constant color photography is mean to remove the "tone mapping" applied to photograph captured with camera app, usually incldsuing artistic intent, and instead try to be a close as possible to the real color of the scene, regardless of the illumination constant color images could be captured in HEIF anf JPEG laste year. this year we are adding Support for the DICOM medical imaging photo format. It is a fomrat used by the health industry to store images related to medical subjects like MRI, skin problems, xray and so on. It's writable and also readable format on all OS26, supported through AVCapturePhotoOutput APIs and through the coregraphics api. for coregrapphics there is a new DICOM entry in the property dictionary which includes all the dicom availbale and defined propertie in a file. finder will also display all those in the info panel (Address why a developer would want to use it) - not for regualr picture taking apps. for those HEIF and JPEG are the preferred delivery format. use dicom if your app produces output that are health related, that you can also share with health providers or your doctors Main session developer questions Question 1 LiDAR vs. Dual Camera depth generation: Which resolution does the LiDAR sensor natively have (iPhone 16 Pro) and when to prefer LiDAR over Dual Camera? Both report formats with output resolutions (we don't advertise sensor resolution) Lidar vs Dual, etc: Lidar: Best for absolute depth, real world scale and computer vision Dual, etc: relative, disparity-based, less power, photo effects Also see: 2022 WWDC session "Discovery advancements in iOS camera capture: Depth, focus and multitasking" Question 2 Can true depth and lidar camera run at 60fps? Lidar can do 30fps (edited) Front true depth can do 60fps. Question 3 What’s the first class way to use PhotoKit to reimplement a high performance photo grid? We’ve been using a LazyVGrid and the photos caching manager, but are never able to hit the holy trinity (60hz, efficient memory footprint, minimal flashes of placeholder/empty cells) use the PHCachingImageManager to get media content delivered before you need to display it specify the size you need for grid sized display set the options PHVideoRequestOptionsDeliveryModeFastFormat, PHImageRequestOptionsDeliveryModeFastFormat and PHImageRequestOptionsResizeModeFast Question 4 For rending live preview of video stream, Is there performance overhead from using async and Swift UI for image updates vs UIViewRepresentable + AVCaptureVideoPreviewLayer.self? AVCaptureVideoPreviewLayer is the most efficient display path Use VDO + AVSampleBufferDisplayLayer if you need to modify the image data Swift UI image is optimized for static image content Question 5 Is there a way to configure the AVFoundation BuiltInLiDarDepthCamera mode to provide a depth map as accurate as ARKit at close range? The AVCaptureDepthDataOutput supports filtering that reduces noise and fills in invalid values. Consider using this for smoother depth maps Question 6 Pyramid-based photo editing in core image (such as adobe camera raw highlights and shadows)? First off you may want to look a the builtin filter called CIHighlightShadowAdjust Also the noise reduction in the CIRawFilter uses a pyramid-based algorithm. You can also write your own pyramid-based algorithms by taking an input image: down sample it by two multiply times using imageByApplyingAffineTransform apply additional CIKernels to each downsampled image as needed. use a custom CIKernel to combine the results. Question 7 Is the best way to integrate an in-app camera for a “non-camera” app UIImagePickerController? Yes, UIImagePickerController provides system-provided UI for capturing photos and movies. Question 8 Hello, my question is on Deferred Photo Processing? Say I have a photo capture app that adds a CIFilter to the capture. How can I take advantage of Deferred Photo Processing? Since I don’t know how to detect when the deferred captured photo is ready CIFilter can be called on the final at that point Photo will have to be re-inserted into the Photo library as adjustment Question 9 For shipping photo style assets in the app that need transparency what is the best format to use? JPEG2000? will moving to this save a lot of space comapred to PNG or other options? If you want lossless compression PNG is good and supports unpremutiplied alpha If you want lossy compression HEIF supports premutiplied or unpremutiplied alpha (Note: this is part 1 of a 3 part posting. See Part 2 or Part 3)
Replies
0
Boosts
0
Views
535
Activity
Jul ’25
Potential Documentation Error in kAudioAggregateDevicePropertyTapList Sample Code
Hi, I believe I've found a potential error in the sample code on the documentation page for creating and using a process tap with an aggregate device. The issue is in the section explaining how to add a tap to the aggregate device. I have already filed a Feedback Assistant ticket on this (ID: FB17411663) but haven't heard back for months. Capturing system audio with Core Audio taps The sample code for modifying the kAudioAggregateDevicePropertyTapList incorrectly uses the tapID as the target AudioObjectID when calling AudioObjectSetPropertyData. // (Code to get the list and potentially modify listAsArray) if var listAsArray = list as? [CFString] { // ... (modification logic) ... // Set the list back on the aggregate device. <--- The comment is correct list = listAsArray as CFArray _ = withUnsafeMutablePointer(to: &list) { list in // INCORRECT: This call uses tapID as the target object. AudioObjectSetPropertyData(tapID, &propertyAddress, 0, nil, propertySize, list) } } The kAudioAggregateDevicePropertyTapList is a property that belongs to the aggregate device, not the individual tap. Therefore, to set this property, the AudioObjectSetPropertyData function must target the AudioObjectID of the aggregate device itself. Using tapID as the first argument is logically incorrect for this operation and will not update the aggregate device as intended. Furthermore, the preceding AudioObjectGetPropertyData call to fetch the list also appears to use the incorrect tapID as its target in the sample. The AudioObjectID for both getting and setting this property should be the ID of the aggregate device. _ = AudioObjectGetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, &propertySize, &list) _ = AudioObjectSetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, propertySize, newList) Thank you!
Replies
0
Boosts
0
Views
475
Activity
Sep ’25
After iPadOS 26 beta and iOS 26 beta, AVCaptureMetadataOutput no longer detects Face on some devices.
I'm creating an app that uses AVCaptureSession to pass camera input to AVCaptureMetadataOutput type set [metaout setMetadataObjectTypes:@[AVMetadataObjectTypeFace]] and scan Face. After updating to OS 26 Beta2 and iOS 26 Beta2, an issue has occurred where the delegate method of AVCaptureMetadataOutputObjectsDelegate is not called on some devices. The following devices are experiencing this issue. iPad (9th Gen) iPad air (4th Gen) iPhone 15 This issue has not occur on any other devices I have. I tried running the AVFoundation sample code on the Apple Developer site on the above device. The same problem still occurs. https://developer.apple.com/documentation/avfoundation/capture_setup/avcambarcode_detecting_barcodes_and_faces Are any additional settings required after OS 26 beta and iOS 26 beta? Or is there some problem on the OS side?
Replies
0
Boosts
2
Views
147
Activity
Jul ’25
Play Audio and Recognize Speech in Car
Hello, I'm trying to determine the best/recommended AVAudioSession configuration (i.e category, mode, and options) for the following use-case. Essentially, I'd like to switch between periods of playing an audio file and then recognizing speech. The audio file is typically speech and I don't intend for playback and speech recognition to occur simultaneously. I'd like for the user to sill be able to interact with Siri and I'd like for it to work with CarPlay where navigation prompts can occur. I would assume the category to use is 'playAndRecord', but I'm not sure if it's better to just set that once for the entire lifecycle, or set to 'playback' for audio file playback and then switch to 'playAndRecord' for speech recognition . I'm also not sure on the best 'mode' and 'options' to set. Any suggestions would be appreciated. Thanks.
Replies
0
Boosts
0
Views
607
Activity
Sep ’25
Capture session interrupted randomly
We are facing a strange issue where a small portion of our large userbase can not start the capture session in our app, as it gets interrupted with the following reason: AVCaptureSessionInterruptionReasonVideoDeviceNotAvailableWithMultipleForegroundApps Our users are all from iPhones, no one is using an iPad. Just to be sure we have set session.isMultitaskingCameraAccessEnabled = true but it does not seem to make any difference. Another weird interruption we are seeing
Replies
0
Boosts
0
Views
122
Activity
Jun ’25
How to mark Audio Unit as dirty (needing to be saved)
I'm working on a v2 Audio Unit that has some complicated internal state (audio, midi, other settings). When the internal state changes, I want to inform the host (f.i. Logic Pro) that my plugin state has changed, and that the main window should show the 'project changed' status through the window close button. This was easy to achieve for the VST version of the plugin, but I can't figure out a way to do it for the Audio Unit. I've tried: Notifying change of the kAudioUnitProperty_ClassInfo property that stores the plugin state: unit->PropertyChanged(kAudioUnitProperty_ClassInfo, kAudioUnitScope_Global, 0); Setting the kAudioUnitProperty_ClassInfo property value each time the plugin state changes. Adding a new parameter called 'dirtystate' and toggling it and notifying the change each time the plugin state changes. But nothing really make Logic take notice. This should be an easy task, but I can't put my finger on it. How do I flag may AUv2 as needing its status saved (i.e. the host project needs saving)?
Replies
0
Boosts
0
Views
157
Activity
Jan ’26