Hello. In the Xcode 15 we were using this command in the terminal to run our tests on the Rosetta Simulator: xcodebuild -workspace CoreLibraries.xcworkspace -scheme CoreLibraries -destination 'platform=iOS Simulator,name=iPhone 15,arch=x86_64' test` In the Xcode 16 the same command doesn't work anymore. It produces the error: xcodebuild: error: Unable to find a device matching the provided destination specifier: { platform:iOS Simulator, arch:x86_64, OS:latest, name:iPhone 16 } Unsupported device specifier option. The device “iPhone 16” does not support the following options: arch Please supply only supported device specifier options. Running test directly from the Xcode UI using iPhone 16 (Rosetta) still works fine. Does anyone know how to modify the xcodebuild command to make it work again?

Hello! I've been trying to automate tests using Appium/XCUITests in a React Native APP, but I'm finding many blockers. They are related to the amount of nested elements in the "DOM" in which the XCUItest can not go deeper to get all the elements we need. snapshotMaxDepth -> The XCUITest does not support more than 60 value, otherwise it returns the following error: Got response with status 404: {"value":{"error":"stale element reference","message":"The previously found element "Application 'xyz.xxx.xxx'" is not present in the current view anymore. Make sure the application UI has the expected state. Original error: Error kAXErrorIllegalArgument getting snapshot for element <AXUIElementRef 0x600003aaf750> {pid=95967} {uid=[ID:1 hash:0x0]}","traceback":"(\n\t0 CoreFoundation 0x00007fff20405604 __exceptionPreprocess + 242\n\t1 libobjc.A.dylib 0x00007fff201a4a45 objc_exception_throw + 48\n\t2 WebDriverAgentLib 0x000000010a3caa53 -[XCUIElement(FBUtilities) fb_takeSnapshot] + 723\n\t3 WebDriverAgentLib 0x000000010a3cad07 -[XCUIElement(FBUtilities) fb_snapshotWithAttributes:maxDepth:] + 183\n\t4 WebDriverAgentLib 0x000000010a37baea +[FBXPath writeXmlWithRootElement:indexPath:elementStore:includedAttributes:writer:] + 778\n\t5 WebDriverAgentLib 0x000000010a37b12c +[FBXPath xmlRep... But if I inform less than 60, the XCUITest is not able to get all the elements we need to automate: There are many threads about this, all of them the issue is in the XCUITest: https://github.com/appium/appium/issues/14825 https://discuss.appium.io/t/handling-staleelementreferenceexception/35095/11 https://github.com/appium/appium/issues/18085 https://discuss.appium.io/t/error-in-appium-desktop-refreshing-source-after-adding-snapshotmaxdepth-greater-than-62/34058 https://stackoverflow.com/questions/74235441/appium-cant-reach-elements-in-ios-source-tree-they-are-too-deep-works-fine-in Tested all possible solutions suggested in the threads, but I will have the issue.

All is fine in Xcode15, no LLDB errors whatsoever, but in Xcode16 I can't get any variable displayed in the console because of the following error: error: type for self cannot be reconstructed: type for typename "$......." was not found (cached) error: Couldn't realize Swift AST type of self. Hint: using `v` to directly inspect variables and fields may still work. I've checked the output of swift-healthcheck and there are several messages like this: SwiftASTContextForExpressions(module: "ROA", cu: "ROA+ViewLayer.swift")::LoadOneModule() -- Missing Swift module or Clang module found for "UIKit", "imported" via SwiftDWARFImporterDelegate. Hint: Register Swift modules with the linker using -add_ast_path. I added -add_ast_path to the OTHER_LDFLAGS in the faulty module's build settings but no luck. How can I debug my project in Xcode16?

Xcode is throwing an error when attempting to report test coverage after running unit tests. Showing All Messages Failed to merge raw profiles in directory /{my project dir}/DerivedData/{my project name}/Build/ProfileData/A98EC493-3AB4-4B1C-B7FC-BC5D77B23EE3 to destination /{my project dir}/DerivedData/{my project name}/Build/ProfileData/A98EC493-3AB4-4B1C-B7FC-BC5D77B23EE3/Coverage.profdata: Aggregation tool '/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/llvm-profdata' failed with exit code 1: warning: /{my project dir}/DerivedData/{my project name}/Build/ProfileData/A98EC493-3AB4-4B1C-B7FC-BC5D77B23EE3/997F01E3-3735-4897-AE00-31EBB0A9E8D3-57885.profraw: invalid instrumentation profile data (file header is corrupt) error: no profile can be merged Anyone else seeing this issue?

I've updated my computer to Sequoia 15, Xcode 16 and now no matter what I do, I am unable to work with Swift UI previews. I get this error each time I try to run the preview: Failed to launch app in reasonable time I have done: Uninstall/Re-install Xcode Deleted derived data Deleted the simulator data Used DevCleaner to remove all data related to Xcode Searched all websites about this issue. ( Non shown a good solution ) Write this question on here. If anyone has found a solution, please let me know how you fixed it.

Hi, We use Flat package installers (.pkg based installers) to install our applications on macOS. In macOS 26.1, installation is failing with the error Unable to use PK session due to incompatible packages. Terminating. 2025-11-03 14:22:36+05:30 Admin-3 installer[1160]: Install failed: The Installer could not install the software because there was no software found to install. Same installer package is working on macOS 26. Any help is greatly appreciated.

Xcode 16 unindents lines if I choose a code-completion and I cannot find a way to stop this - does anybody know how to stop it? Here's a link to a gif demonstrating this problem - it's incredibly frustrating. https://i.imgur.com/jaDpzpb.gif Thanks in advance

Hello, I am writing this post because the Apple Developer Program enrollment process is clearly malfunctioning, and I have reached a point where this situation is unacceptable. First payment I initially purchased the Apple Developer Program on December 3rd, 2025 at 16:03 (Turkey time). The payment was fully completed, confirmed by my bank, and I received the official Apple Store receipt. • Order ID: W1557478965 • Amount: 1029 TRY • Status: Completed / Posted Despite this, my account continued to show: • “Purchase your membership” • Enrollment status: Pending • No access to App Store Connect After several days with no response from Apple Support and no activation, I assumed something had gone wrong on Apple’s side. Second payment Because I was completely blocked and received no reply from support or the forums, I made a second payment to rule out any payment failure. • Order ID: W1694587309 • Amount: 1029 TRY • Status: Completed / Posted Current situation At this point: • Two separate payments • Two unique Apple Store order IDs • Zero activation • Zero response from Apple Support • Enrollment still Pending • App Store Connect still inaccessible Support case details: • Apple Support Case ID: 102769533427 • Multiple follow-ups sent • No reply • No action taken This is no longer a delay — this is a system-level failure. I have paid twice for a single Developer Program membership and received nothing in return: no activation, no explanation, and no support. I am formally requesting manual intervention by Apple staff to: 1. Immediately activate my Apple Developer Program membership 2. Investigate and resolve the duplicate payment (refund or clarification) 3. Explain why a paid enrollment can remain blocked with no support response If this forum is monitored by Apple employees, this issue requires urgent escalation. This situation should not happen in a paid developer program. Thank you.

Several app developers are struggling with the inability to provide a separate app icons that looks nice on older macOS versions while at the same time provide Icon Composer icons that look great on macOS Tahoe 26. An ability to provide separate icons is super important to those who have app icons that follow the curvature of the default icon borders (as the corner rounding radius is different for Sequia and Tahoe). Take a look at this for example: https://github.com/ghostty-org/ghostty/issues/7564#issuecomment-3042061547 Question: Is there a definitive/recommended way to address this issue? How can a developer add a glass icon variant that looks good on Tahoe and provide a bitmap icon for older macOS versions? Some background info: Prior to Xcode 26 beta 4, one could add an App Icon to Assets to be used as app icon for legacy macOS versions (Sequia and older) and use a new Icon Composer icon (placed in the project root) for macOS Tahoe 26. Enabling "Include all app icon assets" under target settings ensured that older macOS versions would use the old app icons while Tahoe the new Icon Composer glass one. Since Xcode beta 4 this technique no longer works. Xcode instead insists on populating Assets.car with Icon Composer generated variants, disregarding the App Icon provided in Assets. Although the App Icon in Assets makes its way to a .incs file in the app bundle's Contents/Resources folder, but that is not used by macOS anymore and is there for some compatibility purposes. The Assets.car file (which matters) only contains the variants generated by Icon Composer and does not contain the png icons provided in the Assets.

Hello. I'm seeing an inconsistent behavior where breakpoints I set in my (Swift) iOS app behave normally when I'm debugging on a device or on a simulator running iOS 17.x, but when I try using simulators of iOS 16 or 15 the breakpoints get ignored completely. I also observe that the breakpoints remain solid blue and do NOT adopt the dotted blue outline, as experienced by other users. I've seen a few posts on here and on SO about the general issue of ignored breakpoints (with no conclusive answer AFAIK), but I haven't seen any where the behavior varies with the SDK being used. The behavior is repeatable and predictable (within the same app at least). I am not adding the breakpoints after building/running, and I'm sure the logic reaches the lines with the breakpoints (and again, whenever I switch to an iOS 17 simulator, execution does pause as expected with the exact same breakpoints). Things I've tried and looked into: Clean up project build folder Delete and re-install simulators (iOS 16.4 and 15.5) Deleted the entire derived data directory, as well as the CoreSimulator one. Confirm the build configuration is Debug, and the "Debug executable" option is checked. inspect various build flags mentioned in other posts: {Swift compiler - Code generation - Optimization level - Debug: -0none; Debug information format: DWARF (I also tried DWARF with dSYM with no impact)}. Most of my settings are on the plain vanilla/out of the box side, with only a couple of SPM dependencies, and I've been maintaining the same app for about 5 years and don't think I've come across this behavior before. Currently using Xcode 15.1. Deployment target is 14.0. Thank you.

Xcode 16.3 build on ios18.4 ,app can't launch. Then lost connection to the debugger . but Xcode16.3 with ios18.3 can launch

We started seeing an access issue today when attempting to go to the Xcode Cloud tab in App Store Connect. When you navigate to https://appstoreconnect.apple.com/teams/:teamId/apps/:appId/ci we're seeing the following message: The page you’re looking for can’t be found. The page you’re looking for does not exist, or you do not have permission to view it. I am the account holder so it shouldn't be a permissions issue. Is there an ongoing outage or problem in Xcode Cloud? And, if so, where can I monitor this accurately?

We are trying to track down some build failures that started happening only in our Jenkins CI environment. error: Failed to decode version info for '/Applications/Xcode.app/Contents/Developer/usr/bin/actool': The data couldn’t be read because it is missing. (stdout: '<?xml version="1.0" encoding="UTF-8"?> [2025-07-30T19:21:18.479Z] <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> [2025-07-30T19:21:18.479Z] <plist version="1.0"> [2025-07-30T19:21:18.479Z] <dict> [2025-07-30T19:21:18.479Z] <key>com.apple.ibtool.version</key> [2025-07-30T19:21:18.479Z] <dict> [2025-07-30T19:21:18.479Z] <key>bundle-version</key> [2025-07-30T19:21:18.479Z] <string>24112</string> [2025-07-30T19:21:18.479Z] <key>short-bundle-version</key> [2025-07-30T19:21:18.479Z] <string>26.0</string> [2025-07-30T19:21:18.479Z] </dict> [2025-07-30T19:21:18.479Z] </dict> [2025-07-30T19:21:18.479Z] </plist> [2025-07-30T19:21:18.479Z] ', stderr: '' Key facts we've noted: Locally I cannot reproduce the problem We did not see this problem with previous Xcode 26 betas If I remote into the machine and run build commands from the command line I cannot reproduce the problem The very first build succeeds, every build after that on this machine fails from jenkins actool --version is spitting out the version information for ibtool, but only in the context of running from a jenkins agent. If I run this locally or if I remote into the CI machine and run this from the terminal I cannot reproduce this behavior. Command line tools appear to be installed, xcode-select --install fails if I try to do it from the command line. We've tried to recreate the build agents for this jenkins environment exactly as they were for all previous betas and xcode versions, and still get this behavior.

When Xcode 26 Beta 5 compiles my XIBs into NIBs, it spits out a dependency on a class that isn't available pre-macOS 26, named _TtCC6AppKit14NSScrollPocketP33_EC3F85FAB7755D56E669206D2B17725B12BackdropView. All XIBs have a deployment target of macOS 12, so in theory this should be avoided. Even if this is a new (internal) class to macOS 26, the dependency is a problem when the developer is asking to deploy to prior versions. Has anyone else run into this regression? What could possibly be causing the XIB compiler to inject this dependency? The resulting NIBs don't load on anything prior to macOS 26.

Hello everyone, I am encountering a persistent issue with Xcode where I’m unable to install my app on a testing device due to the following error message: Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.SznYNY/extracted/iForC.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) Here’s what I have tried so far to resolve this issue: 1. Ensured that all my certificates and provisioning profiles are current and valid. 2. Removed all related certificates from my Keychain and reinstalled new ones. 3. Cleaned and rebuilt the project multiple times. 4. Unpaired the device and paired it again. 5. Reinstalled the latest version of Xcode. 6. Performed a complete restore of my Mac. Despite these troubleshooting steps, I am still facing the same issue. I would greatly appreciate any insights or experiences related to this error from anyone who has overcome similar challenges. Thank you in advance for your help!

A user of my app sent me a crash report. I have never seen one like this before. All of my app's symbols are replaced with three question marks (???) Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 ??? 0x10844eb40 ??? 1 CoreFoundation 0x7ff80f155518 __CFNOTIFICATIONCENTER_IS_CALLING_OUT_TO_AN_OBSERVER__ + 137 and the binary image as 0x0 - 0xffffffffffffffff ??? (*) <00000000-0000-0000-0000-000000000000> ??? so I cannot find out where exactly the crash happened. What can cause this kind of crash report and can I do anything with it? crash.ips

There are at the moment a lot of spams for a bank phone number. https://developer.apple.com/forums/thread/769506 What is really surprising is to read App Store Connect Engineer answer, each time the same: We appreciate your interest in participating in the forums! These forums are for questions about developing software and accessories for Apple platforms. Your question seems related to a consumer feature and is better suited for the Apple Support Communities Is it an automatic answer (I cannot believe anyone who read the post did not notice it was a spam) ? If so, couldn't it simply detect it is a spam (Apple Intelligence could come to help) and delete the message (or the account) ? PS: it would also be a spam in Apple Support Communities PS2: I note the message has been deleted very rapidly.

I am setting up a new app and am having problems with Xcode Cloud. From Xcode if I click on the "Cloud" button under the Report Navigator I get a spinner for a long time then get the message "Could not load Xcode Cloud data". I also visited the "Xcode Cloud" tab under my app in App Store Connect and I get a spinner and nothing loads. This is a recent account and I'm setting up Xcode Cloud for the first time. Below is what I've tried and I'm out of ideas on how to get this working. In Xcode, I signed out and back in as the Account Holder Closed Xcode and reopened This occurred yesterday and today and have not seen a problem under the Apple System Status page On the latest Xcode 16.2 Checked the Signing & Capabilities tab in Xcode and my team a bundle Id is correct and it's happy with signing. At this time on my machine I am using the distribution profile.

Have tried to join the developer programme and says its still pending after 3 days. Anyone any idea how long the procedure takes??

We have a macOS application packaged as a .pkg file. To notarize it, we first code-sign individual library folders and the .app bundle using the following command: codesign --force --deep --sign "Developer ID Application: &amp;lt;Our Account Name&amp;gt;, LLC (Team ID)" "Our_product.app" Code Sign result for .app file: Our_prodcut.app: valid on disk Our_product.app: satisfies its Designated Requirement We are using packages tool to create .pkg file with code signed .app file. Steps followed once .pkg file is ready: 1. Product Sign: productsign -sign "Developer ID Installer: &amp;lt;Our Account Name&amp;gt;" output.pkg signed-output.pkg 2. Submit for notorization: `xcrun notarytool submit signed-outout.pkg --keychain-profile "notarytool-password" --wait Received following output: Current status: Accepted................................. Processing complete id: 2d5c450f-5b22-4b4d-9579-ef21c0356548 status: Accepted Transferred Notarization log: xcrun notarytool log 10169892-b28c-407c-b348-edab0b34ef34 --keychain-profile "notarytool-password" Desktop/developer_log_6.json We have observed log with "Accepted" status with issues as "null". 3. Stapler: stapler staple signed-output.pkg stapler validate signed-output.pkg Processing: signed-output.pkg The validate action worked! 4. Checking status of .pkg file: Command: spctl --assess --verbose=4 signed-output.pkg Output: signed-output.pkg: rejected source=no usable signaturess Warning During Installation: While installing the .pkg file, a security warning appears as follows. Please help us to resolve this.