Environment Xcode version: Xcode 16.0 iOS device system version: iOS 18.4 / 18.5 Problem description When debugging iOS 18.4/18.5 on a real device, the App starts very slowly after clicking Run, usually taking 2-3 minutes, which is much slower than iOS 18.3. It manifests as Xcode staying in the Launch stage for a long time, and the application stuck in the opening screen interface. Start the APP first, then attach the process, and this problem will not exist Location process Use lldb to enable logs log enable gdb-remote packets After observing the logs, it was found that: The jam mainly occurs when processing two data packets: jGetLoadedDynamicLibrariesInfos and qProcessInfo These two commands involve dynamic library loading information and process meta information, and the response time is much higher than the normal level, far exceeding other gdb-remote instructions Use Instruments / Profiler to analyze: The CPU peak of the real machine debugserver is concentrated in the dynamic library information loading process of _dyld_process_info_create Is there a way to deploy a modified debugserver on the real machine to further locate the problem How to enable and view the debugsever log to further locate the problem

Hi, I'm trying to plan some roadmaps out and also have some issues with ios 15.0. Since it's no longer supported by Apple, any word on if/when iOS 15.0 will be removed from the "minimum deployment" version list in Xcode?

I am on MacOs 15.4.1 which is being deployed with an old version of Ruby ruby 2.6.10 and bundler version 1.17.2. I ran pod install after generating the pods with these versions and during the application compilation there have been several issues reported against pods code.

So I'm testing a microapp that is contained in an IPFS folder. I use a web3 website that is used to view NFTs and their IPFS files. The app has gyro controls, which are enabled through a confirmation gesture. In iOS 18.5, when I press "Request Permission" button I get the popup to allow the app to acess movement and orientation. In iOS26, pressing the button does nothing. Keep in mind that this only happens through the website, that uses iframes. When I load the IPFS file from a direct link, the popup appears with no issue. I think this might be because iOS26 uses WebGPU or it might be a bug since iOS26 is still in beta.

When a new application runs on iOS 18.4 simulator and tries to access the Speech Framework, prompting a request for authorisation to use Speech Recognition, the application will crash if the user clicks allow. Same issue in the visionOS 2.4 simulator. Using Swift 6. Report Identifier: FB17686186 /// Checks speech recognition availability and requests necessary permissions. @MainActor func checkAvailabilityAndPermissions() async { logger.debug("Checking speech recognition availability and permissions...") // 1. Verify that the speechRecognizer instance exists guard let recognizer = speechRecognizer else { logger.error("Speech recognizer is nil - speech recognition won't be available.") reportError(.configurationError(description: "Speech recognizer could not be created."), context: "checkAvailabilityAndPermissions") self.isAvailable = false return } // 2. Check recognizer availability (might change at runtime) if !recognizer.isAvailable { logger.error("Speech recognizer is not available for the current locale.") reportError(.configurationError(description: "Speech recognizer not available."), context: "checkAvailabilityAndPermissions") self.isAvailable = false return } logger.trace("Speech recognizer exists and is available.") // 3. Request Speech Recognition Authorization // IMPORTANT: Add `NSSpeechRecognitionUsageDescription` to Info.plist let speechAuthStatus = SFSpeechRecognizer.authorizationStatus() logger.debug("Current Speech Recognition authorization status: \(speechAuthStatus.rawValue)") if speechAuthStatus == .notDetermined { logger.info("Requesting speech recognition authorization...") // Use structured concurrency to wait for permission result let authStatus = await withCheckedContinuation { continuation in SFSpeechRecognizer.requestAuthorization { status in continuation.resume(returning: status) } } logger.debug("Received authorization status: \(authStatus.rawValue)") // Now handle the authorization result let speechAuthorized = (authStatus == .authorized) handleAuthorizationStatus(status: authStatus, type: "Speech Recognition") // If speech is granted, now check microphone if speechAuthorized { await checkMicrophonePermission() } } else { // Already determined, just handle it let speechAuthorized = (speechAuthStatus == .authorized) handleAuthorizationStatus(status: speechAuthStatus, type: "Speech Recognition") // If speech is already authorized, check microphone if speechAuthorized { await checkMicrophonePermission() } } }

How can I allow the popup I am encountering while I run my UI tests with video recording in the Github actions. Since these tests are running on VMs, it's not possible to manually click Allow. Also the remote robot cannot interact with OS-level dialogs.

I have a ContentView in my app which includes the line of code FileUploadProgressAttributes. this struct is defined in a file included in the target FileUploadProgressExtension. and it is an ActivityAttributes. in ContentView I imported FileUploadProgressExtension, and the xcode is able to find the FileUploadProgressAttributes during prebuild. but during build, it gives me Undefined symbols for architecture arm64: "FileUploadProgressExtension.FileUploadProgressAttributes.init(filename: Swift.String) -> FileUploadProgressExtension.FileUploadProgressAttributes the workaround i found is to add the file with the FileUploadProgressAttributes to my app's target, but I'm not sure if this is the right thing to do. When Xcode created the extension for me, it added the extension target as a target dependency of my app. so obviously if i added this file to my app target it makes the extension target pointless. First time working with widgets so I'm not sure if I'm missing something.

I am encountering an issue while running my CarPlay app in the simulator using CPListTemplate. On app launch, when I tap on the first item in the list and then tap on the second item, both items remain selected instead of only the latest tapped item. This behavior does not align with the expected single-item selection functionality. Has anyone else faced this issue? Is there a workaround or a known resolution for this behavior?

Hi! I am having trouble getting my app to build successfully or archive since an xcode update a few months ago. Below is the error that shows in the log. Thank you in advance for any help! Run custom shell script 'Run Script' Failed to package [project folder]. Command PhaseScriptExecution failed with a nonzero exit code

Xcode 16 insists on showing deprecations of this type: Some.xib SF Symbol 'doc.on.doc' is deprecated, use 'document.on.document' instead. The problem is that the XIBs in question are set with a Deployment Target of macOS 12, where "document.on.document" actually isn't available and produces a missing image. So the warnings are wrong, as they ignore the deployment target set on the XIB. I filed a bug against this long ago and it was ignored. Having given up... does anyone know how to disable this particular warning?

I am trying to add in-app purchases to my app. I created a StoreKit Configuration file and checked the option 'Sync this file with an app in App Store Connect' because I have already completed the subscription setup in my Apple Developer account. I also tried implementing the in-app purchases directly without using the StoreKit Configuration file, but I’m getting an 'Invalid Product Identifiers' error. I’ve double-checked, and the product ID matches the one listed in my Apple account. Please guide me on what I should do.

Hi, I requested the https://itunes.apple.com/lookup?id=6482849843&country=us for getting the information of Goods puzzle sort challange , but the screenshotUrls in the response was empty. Is iTunes search API has issue with getting the screenshot urls ? Is there any plan to update it ?

When you try to reset settings through the Apple Vision Pro simulator (VisionOS 2.4) you get an error "Preferences quit unexpectedly". Bug report: FB17666053

Hi, I’m trying to free up space on my computer and have uninstalled Xcode. However, I noticed that many large files remain on the filesystem even after uninstalling it. The largest remaining files (~33 GB) are iOS Simulator images located at: /System/Volumes/Data/Library/Developer/CoreSimulator/Volumes I attempted to delete them using root privileges, but it seems that these system files are mounted as read-only. I’m reaching out to ask for guidance to ensure that these files do not contain anything important for macOS, and that it’s safe to remove them before getting in recovery mode. Thank you very much for your advice!

I have a valid dev certificate and created a valid provisioning Profile. I have added the Device UDID too , which I can see in provisioning Profile too. In XCode-16 both certificate and provisioning Profile looks good and no issue here with the expiration date too. Issue - While running the app on my iPhone connected to Mac.its shows the build is successful but shows the followinf errors . An IPA of APP failing the installation. Unable to install the App `A valid provisioning profile for this executable was not found. Domain: com.apple.dt.MobileDeviceErrorDomain`

Dear Apple Developer Support team, I would like to request an official confirmation regarding the handling of transaction status in the App Store Server API, specifically for the GET /inApps/v1/transactions/{transactionId} endpoint. As per our current understanding from the official documentation (Get Transaction Info), the API’s behavior appears to be: If a transaction is finalized and successfully processed by App Store, querying this API will return HTTP 200 OK along with transaction details. If a transaction is still in a pending or deferred state (such as awaiting Ask to Buy approval or pending authorization), the API will not return a 200, and instead respond with HTTP 404 Not Found or an appropriate error. Could you please confirm if this behavior is accurate and officially supported? Specifically: Does a 200 OK response guarantee that a transaction is finalized and successfully recorded on App Store servers? In cases where a transaction is pending approval (e.g. Ask to Buy), is it correct that GET /transactions/{transactionId} would return 404 Not Found until the transaction is finalized? We would greatly appreciate your confirmation to align our server-side logic for transaction validation accordingly. Thank you very much for your support! Kind regards, cuongnx

We are experiencing networking issues in our iOS application when it is built with Xcode 16 or later. Our app includes a video conferencing feature that works reliably when built with Xcode 15 or earlier — we can sustain hour-long video sessions without interruption. However, when the app is built using Xcode 16 or higher, network connections drop after 2–3 minutes during a session. This triggers an auto-reconnect, which succeeds, but the connection drops again after another 2–3 minutes. This loop continues indefinitely. Key Details: The issue only occurs in TestFlight builds. When running the app via Xcode debugger, the issue does not occur. The issue is consistently reproducible in TestFlight builds created with Xcode 16 or later. TestFlight builds created with Xcode 15 do not exhibit this issue. All the videoconferencing runs on C and C++ code What We’ve Tried: Reviewed Xcode 16+ release notes but found no relevant changes or deprecations. Verified app configuration and entitlements. Confirmed that no app-side changes occurred between the working and broken builds. Request: We’re seeking guidance on what changes in Xcode 16+ could be affecting networking behavior in release/TestFlight builds. Any insight into relevant build settings, compiler changes, or runtime behavior differences would be greatly appreciated. Thank you in advance for your assistance.

I recently encountered an issue involving Core Data’s new Composite Attributes feature and thought I would share my experience, as well as seek clarification. I created a composite type where all attributes were mandatory, except for one. Subsequently, I added an attribute to an entity and set its type to that composite type. Upon running the app, the console output the following error: CoreData: error: CoreData: error: Row (pk = 85) for entity ‘(EntityName)’ is missing mandatory text data for property ‘(propertyName)’ The way I resolved this was by removing the composite type attribute from the entity, after which the error no longer appeared. I also observed that in another entity, where a different composite type is used, all the attributes were optional — and no error occurred. This raises the question: why must all attributes in a composite type be optional? Furthermore, why does Xcode not inform the developer of this requirement? I have reviewed both the documentation and the WWDC23 “What’s New in Core Data” session, but neither mentions that having non-optional attributes within a composite type will cause such errors and lead to unpredictable application behaviour. Additionally, this issue remains unresolved in another area I raised previously in this topic: Composite Attributes feature requires tvOS deployment target 17.0 or later Composite Attributes feature requires watchOS deployment target 10.0 or later However, I do not have a tvOS or watchOS target, nor do I intend to add one. Could someone from Apple, or anyone with more experience, please clarify why all attributes within a composite type must be optional? And could it be possible for Xcode to flag this at compile time, rather than failing at runtime? Thank you in advance.

hông thể cài đặt “TrungDemo” Domain: IXUserPresentableErrorDomain Code: 14 Recovery Suggestion: Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.kpOILI/extracted/TrungDemo.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) Please ensure that the certificates used to sign your app have not expired. If this issue persists, please attach an IPA of your app when sending a report to Apple. User Info: { DVTErrorCreationDateKey = "2025-04-29 10:51:27 +0000"; IDERunOperationFailingWorker = IDEInstallCoreDeviceWorker; } Failed to install the app on the device. Domain: com.apple.dt.CoreDeviceError Code: 3002 User Info: { NSURL = "file:///Users/studiozego/Library/Developer/Xcode/DerivedData/TrungDemo-blspaulbkwypvhgaxxfjqbppuugg/Build/Products/Debug-iphoneos/TrungDemo.app"; } Không thể cài đặt “TrungDemo” Domain: IXUserPresentableErrorDomain Code: 14 Failure Reason: Không thể cài đặt ứng dụng này vì không thể xác minh tính toàn vẹn của ứng dụng. Recovery Suggestion: Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.kpOILI/extracted/TrungDemo.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.kpOILI/extracted/TrungDemo.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) Domain: MIInstallerErrorDomain Code: 13 User Info: { FunctionName = "+[MICodeSigningVerifier _validateSignatureAndCopyInfoForURL:withOptions:error:]"; LegacyErrorString = ApplicationVerificationFailed; LibMISErrorNumber = "-402620392"; SourceFileLine = 80; } Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "00008132-0001786E22B9001C"; "device_isCoreDevice" = 1; "device_model" = "iPad16,4"; "device_osBuild" = "18.4 (22E240)"; "device_platform" = "com.apple.platform.iphoneos"; "device_thinningType" = "iPad16,4-A"; "dvt_coredevice_version" = "443.19"; "dvt_coresimulator_version" = "1010.10"; "dvt_mobiledevice_version" = "1784.102.1"; "launchSession_schemeCommand" = Run; "launchSession_state" = 1; "launchSession_targetArch" = arm64; "operation_duration_ms" = 1320; "operation_errorCode" = 14; "operation_errorDomain" = IXUserPresentableErrorDomain; "operation_errorWorker" = IDEInstallCoreDeviceWorker; "operation_name" = IDERunOperationWorkerGroup; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.iphoneos"; "param_diag_113575882_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_mtc_enable" = 1; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 99; "param_launcher_substyle" = 0; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_structuredConsoleMode" = 1; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "iphoneos18.4"; "sdk_osVersion" = "18.4"; "sdk_variant" = iphoneos; } System Information macOS Version 15.4.1 (Build 24E263) Xcode 16.3 (23785) (Build 16E140) Timestamp: 2025-04-29T17:51:27+07:00

Hello! I am trying to automate iOS builds for my Unreal Engine game using Unreal Automation Tool, but I cannot produce a functionnal build with it, while packaging from XCode works perfectly. I have tracked down the issue to a missing file. I'm using the Firebase SDK that requires a GoogleService-Info.plist file. I have copied this file at the root of my project, as the Firebase documentation suggests. I have not taken any manual action to specify that this file needs to be included in the packaged app. The Firebase code checks the existence of this file using NSString* Path = [[NSBundle mainBundle] pathForResource: @“GoogleService-Info” ofType: @“plist”]; return Path != nil; If I package my app from XCode using Product -> Archive, this test returns true and the SDK is properly initialized. If I package my app using Unreal Engine's RunUAT.sh BuildCookRun, this test returns false and the SDK fails to initialize (and actually crashes upon trying). I have tried several Unreal Engine tricks to include my file, like setting it as a RuntimeDependecies in my projects Build.cs file. Which enables Unreal Engine code to find it, but not this direct call to NSBundle. I would like to know either how to tell Unreal Engine to include files at the root of the app bundle, or what XCode does to automatically include this file and is there a way to script it? I can provide both versions .xcarchive if needed. Thanks!