How can i get a simple figma layout with minimal art into xcode

I changed something with Bundle Identifier... since then I cannot trust the certificate anymore on iPhone. It just won't show up. I reinstalled new profile, new bundle id, completely reinstalled iPhone... created new certificates, downloaded... nothing... I thinks it needs internet connection, but connection works just fine Unable to Verify App An internet connection is required to verify trust of the developer "Apple Development: My Name (22YBQVQJZK). This app will not be available until verified. this makes me crazy.. I lost like 5 hours on this.. still it does not work... Apple Intelligence tried like everything .. didn't help

I was developing on Xcode and downloading and testing just fine. Today when I connect (via cable), clean, build and run the system When I look in the iPhone ->settings -> General ->VPN & Device Management it does not list my developers tag. How do I get the two talking again. I have restarted the MAC (Xcode) and the iPhone multiple times.

I've seen a couple posts on reddit today but wanted to call out here because I think it may be a more widespread issue - I keep getting an error trying to open my iOS app saying "Unable to verify app - An internet connection is required to verify trust of the developer...". I have never gotten this issue before and did not change anything in my build settings from my last successful build of the app to now. The directions it gives me are to go to Settings > General > VPN and Device Management and trust my developer certificate from there, but that doesn't work either. The first time I tried this, the developer certificate wasn't there at all, then I looked at Reddit and saw people recommending to download the developer certificate to solve the issue, but doing this did not fix the error either. Just looking to see if anyone else has encountered this or what the fix might be.

I have an iOS app that I want to run on my device via Xcode and the USB-C cable. Once I run it through Xcode with my device as the target the app builds on device. But then I get an error message stating I need to Verify App via the Settings section "VPN & Device Management" I click on my account under "Developer App" and I trust my developer account. Then I am asked to "Verify App" And when I do so I can a spinning icon that spins for a minute. Spinning Icon stops and I still cant use the app. I have tried a couple of different things in particular Here is the Xcode error output : Domain: IDELaunchCoreDevice Code: 0 Recovery Suggestion: Verify that the Developer App certificate for your account is trusted on your device. Open Settings on the device and navigate to General -> VPN & Device Management, then select your Developer App certificate to trust it. User Info: { DVTErrorCreationDateKey = "2026-03-10 21:02:06 +0000"; IDERunOperationFailingWorker = IDELaunchCoreDeviceWorker; } -- The application failed to launch. Domain: com.apple.dt.CoreDeviceError Code: 10002 User Info: { BundleIdentifier = "com.clawfighter2.ios"; } -- The request to open "com.clawfighter2.ios" failed. Domain: FBSOpenApplicationServiceErrorDomain Code: 1 Failure Reason: The request was denied by service delegate (SBMainWorkspace) for reason: Security ("Unable to launch com.clawfighter2.ios because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user"). User Info: { BSErrorCodeDescription = RequestDenied; FBSOpenApplicationRequestID = 0xa301; } -- The operation couldn’t be completed. Unable to launch com.clawfighter2.ios because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user. Domain: FBSOpenApplicationErrorDomain Code: 3 Failure Reason: Unable to launch com.clawfighter2.ios because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user. User Info: { BSErrorCodeDescription = Security; } -- Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "00008140-001A04E02193001C"; "device_isCoreDevice" = 1; "device_model" = "iPhone17,1"; "device_osBuild" = "26.3.1 (23D8133)"; "device_osBuild_monotonic" = 2303813300; "device_os_variant" = 1; "device_platform" = "com.apple.platform.iphoneos"; "device_platform_family" = 2; "device_reality" = 1; "device_thinningType" = "iPhone17,1"; "device_transport" = 1; "launchSession_schemeCommand" = Run; "launchSession_schemeCommand_enum" = 1; "launchSession_targetArch" = arm64; "launchSession_targetArch_enum" = 6; "operation_duration_ms" = 12563; "operation_errorCode" = 0; "operation_errorDomain" = IDELaunchCoreDevice; "operation_errorWorker" = IDELaunchCoreDeviceWorker; "operation_error_reportable" = 0; "operation_name" = IDERunOperationWorkerGroup; "param_consoleMode" = 1; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.iphoneos"; "param_diag_MTE_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_mtc_enable" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 99; "param_launcher_substyle" = 0; "param_lldbVersion_component_idx_1" = 0; "param_lldbVersion_monotonic" = 170302360103; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "iphoneos26.2"; "sdk_osVersion" = "26.2"; "sdk_platformID" = 2; "sdk_variant" = iphoneos; "sdk_version_monotonic" = 2302005700; } -- System Information macOS Version 26.3 (Build 25D125) Xcode 26.3 (24587) (Build 17C529) Timestamp: 2026-03-10T16:02:06-05:00

This is a grave issue I am facing while testing my apps on my personal device. This is the error I seem to be getting: "The application could not be launched because the Developer App Certificate is not trusted." And on the phone side, this is the message: Unable to Verify App. An internet connection is required to verify the trust of the developer "Apple Development... Before I receive any recommendations, such as deleting Xcode or restarting my device, I would like to clarify that I have already taken all necessary precautions. The application I was testing appeared to function correctly in the morning a few hours prior to the update. However, after upgrading to the latest beta builds, iOS 26.4 beta and the latest macOS beta, this issue has become a recurring problem. I would greatly appreciate your assistance in resolving this matter, as it is of utmost importance to me.

Recently I noticed that although my drive showed ~800Gb of usage, the folders within totally to around ~600Gb (and yes I was including hidden 'dot' files/folders. After some inspection I found that there are a whole set of Disk Media Images, that appear to be related to XCode simulators. Here's an extract from the command line diskutil list command: /dev/disk5 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +17.6 GB disk5 Physical Store disk4s1 1: APFS Volume iOS 26.2 Simulator 17.1 GB disk5s1 /dev/disk6 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +14.2 GB disk6 1: Apple_APFS Container disk7 14.2 GB disk6s1 /dev/disk7 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +14.2 GB disk7 Physical Store disk6s1 1: APFS Volume XROS 26.2 Simulator 13.8 GB disk7s1 /dev/disk8 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +17.2 GB disk8 1: Apple_APFS Container disk9 17.2 GB disk8s1 /dev/disk9 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +17.2 GB disk9 Physical Store disk8s1 1: APFS Volume iOS 26.0 Simulator 16.7 GB disk9s1 /dev/disk10 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +8.5 GB disk10 1: Apple_APFS Container disk11 8.5 GB disk10s1 /dev/disk11 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +8.5 GB disk11 Physical Store disk10s1 1: APFS Volume XROS 2.5 Simulator B... 8.2 GB disk11s1 /dev/disk12 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +18.0 GB disk12 1: Apple_APFS Container disk13 18.0 GB disk12s1 /dev/disk13 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +18.0 GB disk13 Physical Store disk12s1 1: APFS Volume XROS 2.5 Simulator 17.5 GB disk13s1 /dev/disk14 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +17.6 GB disk14 1: Apple_APFS Container disk15 17.6 GB disk14s1 /dev/disk15 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +17.6 GB disk15 Physical Store disk14s1 1: APFS Volume iOS 26.1 Simulator 17.1 GB disk15s1 /dev/disk16 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +14.1 GB disk16 1: Apple_APFS Container disk17 14.1 GB disk16s1 /dev/disk17 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +14.1 GB disk17 Physical Store disk16s1 1: APFS Volume XROS 26.1 Simulator 13.7 GB disk17s1 /dev/disk18 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +17.6 GB disk18 1: Apple_APFS Container disk19 17.6 GB disk18s1 /dev/disk19 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +17.6 GB disk19 Physical Store disk18s1 1: APFS Volume iOS 26.1 Simulator 17.1 GB disk19s1 /dev/disk20 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +9.1 GB disk20 1: Apple_APFS Container disk21 9.1 GB disk20s1 /dev/disk21 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +9.1 GB disk21 Physical Store disk20s1 1: APFS Volume iOS 18.5 Simulator B... 8.8 GB disk21s1 /dev/disk22 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +20.7 GB disk22 1: Apple_APFS Container disk23 20.7 GB disk22s1 /dev/disk23 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +20.7 GB disk23 Physical Store disk22s1 1: APFS Volume iOS 18.5 Simulator 20.2 GB disk23s1 I am unable to unmount them, either from the command line or Disk Utility. How do I go about this?

Setup: Xcode 26.3. MacOS Tahoe 26.3.1 Signed in for Coding Intelligence with Claude Pro plan. For the first 3 prompts Claude responded normally. Afterwards it always responds with "Your request couldn't be completed."

0 0x10109152c __assert_rtn + 252 1 0x101006054 void std::__1::__introsort<std::__1::_ClassicAlgPolicy, ld::AliasAddressOrderer&, ld::Atom const**, false>(ld::Atom const**, ld::Atom const**, ld::AliasAddressOrderer&, std::__1::iterator_traits<ld::Atom const**>::difference_type, bool) + 0 2 0x1010059a4 ld::LayoutLinkedImage::assignAtomOffsetsInSection(ld::SectionLayout&, unsigned int, bool) + 680 3 0x10100a724 void dispatchForEach<ld::SectionLayout*, ld::LayoutLinkedImage::sortAtomsWithinSections()::$_0>(std::__1::span<ld::SectionLayout*, 18446744073709551615ul>, unsigned long, ld::LayoutLinkedImage::sortAtomsWithinSections()::$_0)::'lambda'(unsigned long)::operator()(unsigned long) const + 7852 4 0x180818aec _dispatch_client_callout2 + 16 5 0x1808137f8 _dispatch_apply_invoke3 + 336 6 0x180818ad4 _dispatch_client_callout + 16 7 0x180801a60 _dispatch_once_callout + 32 8 0x180812938 _dispatch_apply_invoke + 252 9 0x180818ad4 _dispatch_client_callout + 16 10 0x1808359dc _dispatch_channel_invoke.cold.5 + 32 11 0x18081113c _dispatch_root_queue_drain + 736 12 0x180811784 _dispatch_worker_thread2 + 180 13 0x1809b7e10 _pthread_wqthread + 232 ld snapshot written at /tmp/AIChatDoctor-2026-03-10-150254.ld-snapshot ld: Assertion failed: (aliasSectionNum == sectionNum && "alias and its target must be located in the same section"), function assignAliasAtomOffsetInSection, file Layout.cpp, line 4805. clang: error: linker command failed with exit code 1 (use -v to see invocation)

Hello! I'm new to xcode and am developing an iOS app. I hit the following error when build my app: MY_SHA no identity found Command CodeSign failed with a nonzero exit code I have generated my certificate through xcode. I can see the Certificate and the private key in Keychain -> login. But it's not that private key is under the Certificate. They are listed in parallel. The certificate appears in Certificate tab but not in My Certificate Tab. Would that matter? security find-certificate -a -Z | grep -A1 "Apple Development" Gives me the certificate. But security find-identity -v -p codesigning give 0 valid identity found. Could you help me figure out what could be the reason for this? I've been stuck for several days now. Thank you so much!

I am unable to use my iPhone 17 Pro as a run destination in Xcode. The device appears at a low level, but CoreDevice / devicectl keeps reporting it as unavailable. Environment • Mac mini (Apple Silicon) • macOS 26.3 (Build 25D125) • iPhone 17 Pro • iOS 26.3 • Xcode 26.3 (Build 17C529) • Xcode 26.4 beta 2 (Build 17E5170d) Symptoms • The iPhone appears in Finder • On the iPhone, I tapped “Trust This Computer” • Developer Mode is enabled • Apple ID is added in Xcode Accounts • Team is configured in Signing & Capabilities • iOS Platform Support is installed • The device still does not become available as a run destination • Devices and Simulators does not show it in a usable state • xcrun devicectl list devices still shows unavailable Output of xcrun devicectl list devices Failed to load provisioning paramter list due to error: Error Domain=com.apple.dt.CoreDeviceError Code=1002 "No provider was found." UserInfo={NSLocalizedDescription=No provider was found.}. devicectl manage create may support a reduced set of arguments. Name Hostname Identifier State Model CAC1B56A-C3B4-59FF-8F9D-659277C7C76C.coredevice.local CAC1B56A-C3B4-59FF-8F9D-659277C7C76C unavailable iPhone18,1 What I already tried • Apple cable • Different USB/Thunderbolt ports • Direct connection to rear ports • Restarted both Mac and iPhone • Restarted Xcode • Ran sudo killall usbmuxd • Ran sudo pkill -9 remoted • Upgraded Xcode from 26.2 to 26.3, then to 26.4 beta 2 • Ran sudo xcode-select -s /Applications/Xcode-beta.app • Ran sudo xcodebuild -runFirstLaunch • Reset “Location & Privacy” on the iPhone, then trusted the Mac again • Still remains unavailable Additional note ioreg shows the iPhone, so the physical USB connection seems to exist. However, at the CoreDevice / devicectl layer the device remains unavailable, and Xcode cannot use it for on-device build/run. Is this a known issue with macOS 26.3 / iOS 26.3 / Xcode 26.4 beta 2? Any workaround or additional debugging steps would be appreciated.

Hello, I’m building an iOS video player using AVPlayer and a custom playback queue. I implemented remote controls using MPRemoteCommandCenter and enabled: nextTrackCommand previousTrackCommand playCommand pauseCommand I disabled: skipForwardCommand skipBackwardCommand seekForwardCommand seekBackwardCommand I also set queue metadata in MPNowPlayingInfoCenter: MPNowPlayingInfoPropertyPlaybackQueueIndex MPNowPlayingInfoPropertyPlaybackQueueCount Even with these commands enabled and the queue count greater than 1, the iOS lock screen continues to display the 10-second skip buttons instead of the previous/next track buttons. The commands themselves work correctly when triggered externally (Control Center, headphones, etc.), but the UI still shows the skip controls. Is there a way to force the lock screen UI to display previous / next track buttons for a video playlist? Or is this behavior expected when using AVPlayer with video content? Thanks.

I have the following setup: UIViewRepresentable with a UIView holding UIScrollView ImageView PKCanvasView this is in order to make it appear as if you are writing on a paper which you can zoom and scroll. The UIImageView is holding the paper image. The problem is if you draw some pen strokes at zoom level 1, then zoom in (say zoom level 2) as soon as you place down the pen, the PKCanvasView starts flickering repeatedly very badly. A sample video is here: https://youtube.com/shorts/5zeq6EDheSM a small sample project showing this is here: https://www.icloud.com/iclouddrive/0a0NSLP4bsism69L7jRtZPIhQ#BugDemo

I'm trying to download the iOS 26.2 simulator, but it fails both in Xcode and via the command line. When I run: xcodebuild -downloadPlatform iOS -buildVersion 26.2 -exportPath ~/Downloads It returns: iOS 26.2 is not available for download. I would like to know: Why iOS 26.2 simulator cannot be downloaded at the moment. Whether iOS 26.2 simulator is still available, or if it has been removed or replaced. How to properly get and install the iOS 26.2 simulator. Any official explanation or solution would be greatly appreciated. Thank you!

I've upgraded to a new Macbook recently, just when I was setting up my Xcode, I realized I there is a this red "X" showing up next to my development team as I was signing in to my account I have checked my permission on App Store Connect, everything seemed fine. I have also deleted my old Apple development certificate and requested for another one. Nothing worked.

Even when making a completely fresh Unity project, if I include ARKit and upload it to testflight, when I open it on my ipad it says 'Couldn't Load App'. If I don't include testflight the app opens fine. If I build the app directly to my ipad the app works fine. It opens if I set ARKit to 'optional' but then the AR doesn't work. I have included a camera and location usage description so it's not that. Really not sure what's going on, any help would be massively appreciated!

Hi One of the new Family Control API's requires the new "Family Controls App & Website Usage" capability but it appears to be missing in the latest Xcode beta (26.4 B2). MacOS and iOS all running 26.4 Beta 3. Does anyone know if we have to wait for Xcode 26.4 Beta 3 and it's associated SDK's for this one to become available?

Currently it's Sonnet 4.5. I know that 4.6 is out.

Hi. In my app a need do change launch screen. During development sometime in when I install new version of app over old version sometimes I see old launch screen. Is it possible that this situation will happen on production when I will publish app to App Store? Is Launch screen somehow cached?

I'm based in Australia, and am having the following issue. After leaving this message I received another response from someone else who is also havign the same issue, I've pasted that too. I'm quite surprised to not see it mentioned, could be local to language settings or something. Here is the issue: Folk, I am having an issue where Xcode 26.3 with the new iOS26.2+26.3.1 Simulator update installed doesn’t render Unicode characters in the Canvas or in Simulator. They do render when running direct to a device. I’ve reset devices inside Simulator, cleared Derived Data, cleaned Build Folders etc but to no avail! Is anyone else seeing this, I can’t find a mention anywhere!! Thank you in advance. Yep. Same here. Can't see emojis on the emoji picker keyboard.