Is there anyway that I could use AVAudioSession, AVAudioPlayer or anything similar in Notification Service Extension? I am trying to implement Audio Playback in the Notification Service Extension to play specific audio file when receiving Notification regardless the app state(foreground, background or killed), but I am not able to activate audio session in Notification Service Extension. NSError *sessionError = nil; BOOL success = [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryPlayback error:&sessionError]; success = [[AVAudioSession sharedInstance] setActive:YES error:&sessionError]; if (!success) { NSLog(@"Error activating audio session: %@", sessionError); } Below is the error that I got when I am trying to run the code above in Notification Service Extension. Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed}

Hey there, i implemented live activity in my app and iam trying to start the live activity from push notification, updates works fine even when the app is in background but starting the activity creating issue mostly on background and kill mode when i check the delivery of live activity on cloudkit console it says stored for device power considerations. anyone having the same issue ?

Facing issue while sending push notification through the application. The APNs certificate is valid. Below is the error log. System.AggregateException: One or more errors occurred. ---> PushSharp.Apple.ApnsNotificationException: Apns notification error: 'ConnectionError' ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.EndSend(IAsyncResult asyncResult) at System.Net.Sockets.NetworkStream.EndWrite(IAsyncResult asyncResult) --- End of inner exception stack trace --- at System.Net.Security._SslStream.EndWrite(IAsyncResult asyncResult) at System.Net.Security.SslStream.EndWrite(IAsyncResult asyncResult) at System.IO.Stream.<>c.b__53_1(Stream stream, IAsyncResult asyncResult) at System.Threading.Tasks.TaskFactory1.FromAsyncTrimPromise1.Complete(TInstance thisRef, Func3 endMethod, IAsyncResult asyncResult, Boolean requiresSynchronization) --- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task) at PushSharp.Apple.ApnsConnection.<SendBatch>d__21.MoveNext() --- End of inner exception stack trace --- at PushSharp.Apple.ApnsServiceConnection.<Send>d__2.MoveNext() --- End of inner exception stack trace --- ---> (Inner Exception #0) PushSharp.Apple.ApnsNotificationException: Apns notification error: 'ConnectionError' ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.EndSend(IAsyncResult asyncResult) at System.Net.Sockets.NetworkStream.EndWrite(IAsyncResult asyncResult) --- End of inner exception stack trace --- at System.Net.Security._SslStream.EndWrite(IAsyncResult asyncResult) at System.Net.Security.SslStream.EndWrite(IAsyncResult asyncResult) at System.IO.Stream.<>c.<BeginEndWriteAsync>b__53_1(Stream stream, IAsyncResult asyncResult) at System.Threading.Tasks.TaskFactory1.FromAsyncTrimPromise1.Complete(TInstance thisRef, Func3 endMethod, IAsyncResult asyncResult, Boolean requiresSynchronization) --- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task) at PushSharp.Apple.ApnsConnection.d__21.MoveNext() --- End of inner exception stack trace --- at PushSharp.Apple.ApnsServiceConnection.d__2.MoveNext()<---

Provisioning profiles created for my App ID are not including the Push Notifications capability, even though Push Notifications is enabled in the App ID configuration in Apple Developer Portal. I have enabled Push Notifications for my App ID (com.abc.app) in the Apple Developer Portal. The capability shows as enabled and saved. However, when provisioning profiles are generated (either manually or through third-party tools like Expo Application Services), they do not include: The Push Notifications capability The aps-environment entitlement This results in build failures with the following errors: Provisioning profile "*[expo] com.abc.app AppStore [timestamp]" doesn't support the Push Notifications capability. Provisioning profile "*[expo] com.abc.app AppStore [timestamp]" doesn't include the aps-environment entitlement. Steps Taken ✅ Enabled Push Notifications in App ID configuration (com.mirova.app) ✅ Saved the App ID configuration multiple times ✅ Waited for Apple's systems to sync (waited 5-10 minutes) ✅ Removed and re-added Push Notifications capability (unchecked, saved, re-checked, saved) ✅ Created Push Notification key in Apple Developer Portal ✅ Verified Push Notifications is checked and saved in App ID ❌ Provisioning profiles still created without Push Notifications capability Expected Behavior When Push Notifications is enabled for an App ID, any provisioning profiles created for that App ID should automatically include: Push Notifications capability aps-environment entitlement (set to production or development) Actual Behavior Provisioning profiles are created without Push Notifications capability, even though: Push Notifications is enabled in App ID App ID configuration is saved Sufficient time has passed for sync Additional Information Push Notification Key: Created and valid (Key ID: 3YKQ7XLG9L and 747G8W2J68) Distribution Certificate: Valid and active Provisioning Profile Type: App Store distribution Third-party Tool: Using Expo Application Services (EAS) for builds, but issue persists with manually created profiles as well Questions Is there a delay or sync issue between enabling Push Notifications in App ID and it being available for provisioning profiles? Are there any additional steps required to ensure Push Notifications is included in provisioning profiles? Is there a known issue with Push Notifications capability not being included in provisioning profiles? Should I create the provisioning profile in a specific way to ensure Push Notifications is included? Environment Platform: iOS Build Type: App Store distribution Xcode Version: (via EAS cloud build) Thank you for your assistance. I've been unable to resolve this issue and would appreciate any guidance. iOS Deployment Target: Latest

There is one xpc server and two xpc clients (clientA and clientB). When clientB sends a message to the xpc server, xpc server fills a value for dummyString in it's memory and I want clientA to know that dummyString got updated and also the new value for this dummyString. The updation of dummyString is not something that happens often. Two options we tried: Have a timer for 5 seconds in clientA and keep polling and request for the value of this dummyString. Setup a darwin notification in server that gets posted whenever dummyString is being updated. clientA receives requests for dummyString value only when it observes a notification being posted. Which of these two approaches causes the least delay for clientA to know the updated value of dummyString?

I’m currently developing an iOS app built in Unity, exported to Xcode for signing and deployment. The app needs to register for Apple Push Notifications (APNs) to retrieve the device token and register it with a backend service (PlayFab). Despite enabling the required capabilities and entitlements, the app never receives a device token — the authorization request succeeds, but the token remains empty (req.DeviceToken is null in Unity). I’ve confirmed that the issue occurs before PlayFab or Firebase are involved, meaning the app never receives the token from Apple Push Notification service (APNs) itself. The Unity script I am using is: #if UNITY_IOS using UnityEngine; using Unity.Notifications.iOS; using PlayFab; using PlayFab.ClientModels; using System.Collections; using System; public class iOSPushInit : MonoBehaviour { private const int MaxRetries = 5; private const float RetryDelay = 2f; // seconds void Start() { Debug.Log("🛠 iOSPushInitDebug starting..."); StartCoroutine(RequestAuthorizationAndRegister()); } private IEnumerator RequestAuthorizationAndRegister() { // Request Alert + Badge + Sound permissions and register for remote notifications var authOptions = AuthorizationOption.Alert | AuthorizationOption.Badge | AuthorizationOption.Sound; using (var req = new AuthorizationRequest(authOptions, true)) { Debug.Log("⏳ Waiting for user authorization..."); while (!req.IsFinished) { yield return null; } Debug.Log($"🔔 Authorization finished at {DateTime.Now}: granted={req.Granted}, error={req.Error}"); if (!req.Granted) { Debug.LogError("❌ User denied notification permissions! Cannot get APNs token."); yield break; } // Authorization granted → check for device token int attempt = 0; string token = req.DeviceToken; Debug.Log($"req.DeviceToken: {req.DeviceToken}"); while (string.IsNullOrEmpty(token) && attempt < MaxRetries) { attempt++; Debug.Log($"ℹ️ APNs token not available yet. Attempt {attempt}/{MaxRetries}. Waiting {RetryDelay} seconds..."); yield return new WaitForSeconds(RetryDelay); token = req.DeviceToken; } if (string.IsNullOrEmpty(token)) { Debug.LogWarning("⚠️ APNs token still null after multiple attempts. Try again on next app launch."); yield break; } Debug.Log($"📱 APNs Token acquired at {DateTime.Now}: {token}"); // Register with PlayFab var request = new RegisterForIOSPushNotificationRequest { DeviceToken = token, SendPushNotificationConfirmation = false }; PlayFabClientAPI.RegisterForIOSPushNotification(request, result => Debug.Log("✅ APNs token successfully registered with PlayFab."), error => Debug.LogError("❌ Failed to register APNs token with PlayFab: " + error.GenerateErrorReport())); } } } #endif When running on a real device (not simulator), the following is logged in Xcode: 🔔 Authorization finished: granted=True, error= ℹ️ APNs token not yet available. Try again on next app launch. In the Xcode console, I do not see the expected APNs registration message: [Device] Registered for remote notifications with token: <...> Environment Details: Engine: Unity 6000.2.6f2 Notifications package: com.unity.mobile.notifications 2.4.2 Xcode: 16.4 (16F6) iOS Device: iPhone 12, iOS 26.0.1 Testing Method: Building directly from Unity → Xcode → real device Signing mode: Automatic (with correct Team selected) Certificates in account: Apple Development certificate (active) Apple Distribution certificate (active) Provisioning Profile: Type: App Store (also tested Development profile) Enabled Capabilities: Push Notifications, In-App Purchase App ID Capabilities: Push Notifications: Enabled Development SSL certificate: Present Production SSL certificate: Not generated (yet) Background Modes -> remote notifications What I Have Verified: ✅ Push Notifications capability is enabled in the Xcode target (not UnityFramework). ✅ Team and Bundle Identifier match my Apple Developer App ID. ✅ App ID has Push Notifications enabled in the Developer Portal. ✅ Tested on a real iOS device with working internet. ✅ Rebuilt and reinstalled app after enabling Push Notifications. ✅ Authorization dialog appears and permission is granted by user. How can I resolve this issue?

Hello guys, i need a little help. Im building an alarm clock app, pretty good one, and i have my own sounds i want to use as the alarm ring but notifications on apple cant work when the phone is turned off or the device is in silent mode (Or at least thats how i understand it) unless they have this feature called critical alerts that lets you have notifications even when the phone is turned off or silented. Without this, the phone can do just one beep and only when you open the notification, then it starts ringing but how is this supposed to wake you up? Alarmy has this worked out fine and i cant figure out how, maybe someone here knows. Im thinking maybe they have the critical alerts enabled but then i dont know why Apple would approve theirs and not mine. I tried to submit for the critical alerts feature but apple didn’t approve it saying the app is not the use case and im kinda lost. The whole app could be ruined because of this. So my question is. is there any way how i can use my custom sounds as a notifications on ios even if the phone is turned off or in silent mode+turned off and the app is not straight up running without being approved for critical alerts? Somehow like alarmy does it but i dont know if they have the critical alerts or not. Thank you very much for any kind of help 🙏. For everyone whos reading this, take care!

Notification coordination between iOS and watchOS is not working properly watchOS and iOS try to coordinate between phone and watch notifications. The concept here is that if there is a main app and a companion app, they could both be sending a notification, then the notification would alert on both, which is a deviation from how notification mirroring is handled if there is an iOS app but no watch app. The watch waits for the iOS notification to fire so they can determine if this is the same notification that needs to be deduped, displayed on one device but not the other, or separate notifications to be displayed both. If there is no notification on the phone, the watch will timeout after 13 seconds and alert anyway. If you have an iOS companion app, the best solution to this is to send the same notification on both devices simultaneously, and ensuring the UNNotificationRequest.identifier matches on both notifications. This will let the systems determine how to handle the notification correctly and quickly, and the notification will alert right away. https://developer.apple.com/forums/thread/765669 According to the above article, "when a notification arrives on watchOS alone first, it coordinates with iOS," but in reality, it doesn't work properly. Detailed process of this phenomenon watchOS receives a notification. On watchOS, the notification is not immediately shown to the user. iOS receives a notification with the same UNNotificationRequest.identifier as in (1). The notification in (3) does not appear on either iOS or watchOS. However, the notification from (3) does appear in iOS Notification Center. Thirteen seconds after watchOS received the notification, the notification from (1) is shown to the user on watchOS. In the end, the iOS and watchOS notifications are not consolidated and each remains in its respective notification center. Up to (3) there are no issues. Starting with (4), both iOS and watchOS exhibit a lot of odd behavior. This phenomenon occurs with both local notifications and push notifications. When iOS receives the notification first, there is no problem. The notification for watch received later is processed appropriately, and the watchOS notification is not additionally displayed to the user. Expected proper process Same as above. Same as above. Same as above. The notification in (1) is integrated into the notification in (3). The notification in (3) is alerted to the user immediately. 2 sample projects to reproduce Only the main code is attached. Sample project1: local notifications Swift code for local notification app (iOS, watchOS) - App.swift.txt Sample project2: push notifications This sample project is implemented using Firebase Functions and Firebase Cloud Messaging. Swift code push notification app (iOS, watchOS) - App.swift.txt Server side JavaScript code for FirebaseFunction - index.js.txt Tested devices and OS This phenomenon occurred in both of the following patterns. Pattern 1 Xcode 26.0 iPhone 16 (iOS 26.0) Apple Watch series 10 (watchOS 26.0) Pattern 2 Xcode 16.4 iPhone 11 (iOS 18.6) Apple Watch SE 2nd gen (watchOS 11.6) Question Is this phenomenon a bug? Or is my understanding or implementation incorrect? Feedback Assistant number FB20339772

I created a Notification Service Extension to display profile images in place for the app image (i.e. iMessage). I send a remote push notification via Firebase Functions, and in the payload, the relevant profile image url string. The profile image url string in the payload is successfully delivered as it appears in my console log and AppDelegate didReceiveRemoteNotification function. My problem is the profile image does not replace the default app icon image in the remote push notification. Below is my configuration. Any guidance would be appreciated! Main target app: the info plist contains NSUSerActivityTypes = [INSendMessageIntent]. The Communications Notifications capability is enabled and "Copy only when installing" in Build Phases Embed Foundation Extensions Notification Service Extension plist: contains NSExtension > NSExtensionAttributes > IntentsSupported > INSendMessageIntent. Notification Service Extension class code: var contentHandler: ((UNNotificationContent) -> Void)? var bestAttemptContent: UNMutableNotificationContent? override func didReceive(_ request: UNNotificationRequest, withContentHandler contentHandler: @escaping (UNNotificationContent) -> Void) { self.contentHandler = contentHandler bestAttemptContent = (request.content.mutableCopy() as? UNMutableNotificationContent) guard var bestAttemptContent = bestAttemptContent else { return } guard let fcmOptions = bestAttemptContent.userInfo["fcm_options"] as? [String: Any], let attachmentUrlAsString = fcmOptions["imageURL"] as? String else { contentHandler(bestAttemptContent) return } if let attachmentUrl = URL(string: attachmentUrlAsString) { var senderNameComponents = PersonNameComponents() senderNameComponents.nickname = bestAttemptContent.title let profileImage = INImage(url: attachmentUrl) let sender = INPerson(personHandle: INPersonHandle(value: "1233211234", type: .unknown), nameComponents: senderNameComponents, displayName: bestAttemptContent.title, image: profileImage, contactIdentifier: nil, customIdentifier: nil, isMe: false) let receiver = INPerson(personHandle: INPersonHandle(value: "1233211234", type: .unknown), nameComponents: nil, displayName: nil, image: nil, contactIdentifier: nil, customIdentifier: nil, isMe: true) let intent = INSendMessageIntent( recipients: [receiver], outgoingMessageType: .outgoingMessageText, content: "Test", speakableGroupName: INSpeakableString(spokenPhrase: "Sender Name"), conversationIdentifier: "sampleConversationIdentifier", serviceName: nil, sender: sender, attachments: nil ) intent.setImage(profileImage, forParameterNamed: \.sender) let interaction = INInteraction(intent: intent, response: nil) interaction.direction = .incoming interaction.donate(completion: nil) if #available(iOSApplicationExtension 15.0, *) { do { bestAttemptContent = try bestAttemptContent.updating(from: intent) as! UNMutableNotificationContent } catch { contentHandler(bestAttemptContent) return } } contentHandler(bestAttemptContent) } else { contentHandler(bestAttemptContent) return } } }

We operate a social network application, SportsYou with over 3 million monthly active users and are experiencing significant issues with push notification delivery through APNs. We have a large number of users reporting they are not receiving push notifications. Our infrastructure uses AWS SNS integrated with APNs to deliver notifications. However, AWS CloudWatch consistently reports successful delivery (Success response), even though users confirm they never received the notifications. Because we receive success responses from AWS SNS, our system does not attempt to recreate or refresh the device endpoints. This leaves us unable to detect or recover from these delivery failures automatically. This issue is widespread and inconsistent. It affects users across multiple variables including different iOS versions, different device models, and different versions of our application. We cannot identify a clear pattern that would help us isolate the root cause. With millions of active users, even a small percentage of delivery failures represents thousands of users experiencing a degraded service. This is significantly impacting user engagement and satisfaction. We need guidance on how to properly diagnose this issue and ensure reliable notification delivery to our users. Specifically, we'd like to understand why we're receiving success responses when notifications aren't being delivered, and what steps we can take to detect and prevent these failures.

I received an update to the APN root certificate. Testing the connection using MDM.pem to the push environment returned the following error:BadCertificateEnvironment ERROR

Hi all, I’m running into an issue with provisioning profiles not including the com.apple.developer.push-notifications entitlement — even though everything seems to be configured correctly. Here's what I’ve done: Checked the App ID has Push Notifications enabled. I’ve clicked “Configure” and created a Production APNs certificate under the App ID. I’ve regenerated the provisioning profiles (Ad Hoc and App Store). I can see within the profiles within App Store Connect that the push notifications capability is listed I’ve downloaded and decoded the profiles using: security cms -D -i profile.mobileprovision &gt; decoded.plist But com.apple.developer.push-notifications is still missing under the &lt;key&gt;Entitlements&lt;/key&gt; block. This is causing issues because: When I submit the build to eas I receive this error from XCode: - Provisioning profile "*** Adhoc" doesn't include the com.apple.developer.push-notifications entitlement. Profile qualification is using entitlement definitions that may be out of date. Connect to network to update. (in target '***' from project '***') Refer to "Xcode Logs" below for additional, more detailed logs. To isolate the issue further I: Created a completely new App ID, enabling Push Notifications from the start. Created new APNs certificate. Generated new provisioning profiles with a valid distribution certificate. Still no push entitlement embedded in the profile. Question: Has anyone else encountered this issue where Push Notifications are enabled and configured, but the entitlement still fails to embed in the profile? Thanks in advance.

Hi all, May I please ask for an official clarification or documentation reference from Apple regarding this scenario: Is it possible for an iOS app to automatically launch or open a specific screen when a push notification is received — while the app is in the background or terminated (killed) state? I understand that for most cases, user interaction (such as tapping the notification) is required before the app can show UI. However, I’d like to confirm whether this is also true for time-sensitive or critical alert notifications, including emergency use cases (e.g. public safety alerts). Specifically: Can a critical alert notification directly launch the app or present a view controller? Or is user interaction always required before the app can present any UI, even with the critical alert entitlement? I would appreciate if anyone — especially Apple staff or engineers — could share an official Apple document or statement that confirms this behavior. Thank you very much! (Use case context: I’m developing an emergency broadcast feature for a property management / tenant app.)

I'm strugling about the way how to code notifications for my weather aplication. I use data from my server that receives weather changing values from my own weather station and want to notify user of my app when eg strong wind will blow or temperature go under eg 3℃ etc. The weather station has 8 sensors so there is sometimes a lot of data changing in particular minute that i set to parse data from server and notify user about it. But the notifications only works only when app is on and couple minutes after locking display. So please what could i use strategy for the app to works even when the app sleeps ?

I've got a problem with compatibility with Swift6 in iOS app that I have no idea how to sort it out. That is an extract from my main app file @MainActor @main struct LangpadApp: App { ... @State private var notificationDataProvider = NotificationDataProvider() @UIApplicationDelegateAdaptor(NotificationServiceDelegate.self) var notificationServiceDelegate var body: some Scene { WindowGroup { TabView(selection: $tabSelection) { ... } .onChange(of: notificationDataProvider.dateId) { oldValue, newValue in if !notificationDataProvider.dateId.isEmpty { tabSelection = 4 } } } } init() { notificationServiceDelegate.notificationDataProvider = notificationDataProvider } } and the following code shows other classes @MainActor final class NotificationServiceDelegate: UIResponder, UIApplicationDelegate, UNUserNotificationCenterDelegate { var notificationDataProvider: NotificationDataProvider? func application(_ application: UIApplication, didFinishLaunchingWithOptions launchOptions: [UIApplication.LaunchOptionsKey : Any]? = nil) -&amp;gt; Bool { UNUserNotificationCenter.current().delegate = self return true } func setDateId(dateId: String) { if let notificationDataProvider = notificationDataProvider { notificationDataProvider.dateId = dateId } } nonisolated func userNotificationCenter(_ center: UNUserNotificationCenter, didReceive response: UNNotificationResponse) async { // After user pressed notification let content = response.notification.request.content if let dateId = content.userInfo["dateId"] as? String { await MainActor.run { setDateId(dateId: dateId) } } } nonisolated func userNotificationCenter(_ center: UNUserNotificationCenter, willPresent notification: UNNotification) async -&amp;gt; UNNotificationPresentationOptions { // Before notification is to be shown return [.sound, .badge, .banner, .list] } } @Observable final public class NotificationDataProvider : Sendable { public var dateId = "" } I have set Strict Concurrency Checking to 'Complete.' The issue I'm facing is related to the delegate class method, which is invoked after the user presses the notification. Current state causes crash after pressing notification. If I remove "nonisolated" keyword it works fine but I get the following warning Non-sendable type 'UNNotificationResponse' in parameter of the protocol requirement satisfied by main actor-isolated instance method 'userNotificationCenter(_:didReceive:)' cannot cross actor boundary; this is an error in the Swift 6 language mode I have no idea how to make it Swift6 compatible. Does anyone have any clues?

Hello Apple Support Team, We are using auto-renew plans in our app We have set the webhook URL in our App Store Connect account to get the Store server notification to get the auto renew data for an user The issue is when a user purchases any auto-renew plan at the auto-renew time, we are getting null data from the Apple side. We have printed the log's data to check what data are coming from the Apple webhook. we have attached our logs data please check it and let me know what can we do to resolve this

I trying to validate the certificate I created for APNS using the following command but I get an error. openssl s_client -connect gateway.push.apple.com:2195 -cert temp.pem -debug -showcerts Error: getaddrinfo: nodename nor servname provided, or not known connect:errno=0 Any help will be greatly appreciated.

In the new update of macOS 26 Tahoe, I have noticed that on my MacBook Air M3, I am not getting a warning when my battery is low or when it's about to go to sleep. My MacBook is just turning off without warning.

According to the Apple notification alert received in October 2024, the APNS server certificate update for production is scheduled for February 24, 2025. Has this change been implemented, or is there a platform or method to verify whether this update has been applied in production? If so, where can we check this?"

I’m using the shielding API, my code: let store = ManagedSettingsStore() let whitelist = SharedDefaults.whitelistApplications store.shield.applicationCategories = .all(except: whitelist) And to clear the shield, my code is: store.shield.applications = nil store.shield.applicationCategories = nil The issue: Some users report that after uninstalling my app, the shield is still active, and the UI changes to the default iOS system interface. Even after restarting the device, the apps on the phone remains locked, so the user has no way to remove the shield. Recently I’ve received several complaints on social media and App Store comments, accusing my app of being malicious software. This is not a 100% reproducible bug, but it happens frequently enough. I was also able to reproduce it myself by uninstalling the app during an active lock session. Could Apple engineers please look into this issue and advise how to ensure that once the user uninstalls the app, the device is no longer locked?