We have a subscription WeatherKit app which has been on the App Store since December 2023. I am getting intermittent JWT auth failures on customer devices. In the great majority of cases, the request succeeds, but sometimes it fails, and sometimes it fails and never recovers. I’m working with a customer right now who is unable to get any weather data at all, and the logs he sends me show WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors error 2 The app uses the WeatherKit SDK (we are not using the REST API directly). We know we have the project setup as it has been working since launch, and I can verify weatherkit using security cms -D -i embedded.mobileprovision It it not a problem with the specific query, since I can get data for the dates and locations they are requesting. I can’t replicate the problem on my test devices. In case there is a rate limit issue: this app is a bit unusual and downloads an unusual amount of data at once using multiple queries in parallel using a TaskGroup. When the user creates a location, the app downloads a 10 day block of weather (7 days in the past + 3 day forecast) using WeatherService.shared.weather( for: location, including: WeatherQuery.daily( startDate: startDate, endDate: endDate ), WeatherQuery.hourly( startDate: startDate, endDate: endDate ) ) It also downloads about 2 months of daily precipitation data using multiple parallel calls to dailySummary in 10 day blocks: WeatherService.shared.dailySummary( for: location, forDaysIn: DateInterval(start: startDate, end: endDate), including: .precipitation ) In almost every case, including on my test devices, this works. But some users get WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors error 2 on every request. The two users yesterday that had this problem were both on iOS 18.5 for what that's worth, though the app supports 17.2+ Is anyone else seeing this? And can anyone suggest anything else to explore? It's obviously a terrible experience for customers who pay for the service and are unable to get any data. I did submit this info to Apple as FB18276275

Could someone please explain how to use a custom sound when setting up an alarm using AlarmKit? It keeps playing a default sound. Also, I keep having an issue where the alarm sound plays but doesn’t show the alarm interface buttons unless the screen is locked.

Some of our users encounter an issue after updating their iPhone/iPad to iOS 17.5.1. The tokens passed in the Shield Configuration extension don't match the tokens they selected in my app using the FamilyPicker before updating to iOS 17.5.1. It seems the tokens changed for no reason. My app can't match the token from the ShieldConfigurationDataSource to any tokens stored on my end, causing my shield screens to turn blank. The same applies to tokens in the Device Activity Report extension. The only workaround I've found is to tell affected users to unselect and reselect apps and websites to block in my app. This gets them new tokens from the FamilyActivityPicker, which solves the issue. However, for some users, the bug reoccurs a few days later. Tokens seem to change again, causing the same issue in the Shield Configuration extension. I am not able to reproduce the issue on my test devices so I have no sysdiagnose to attach. However, this issue is affecting other screen time apps: https://developer.apple.com/forums/thread/732845 https://forums.developer.apple.com/forums/thread/756440 FB14082790 FB14111223 A change in iOS 17.5.1 must have triggered this behaviour. Could an Apple engineer give us any updates on this?

Hi, I have a released screentime app ScreenZen. The last few days I've seen a disturbing spike in bug reports coming from people with 17.4.1 and 17.5.1 phones with no update to the app itself. People reported they saw the issue immediately after updating their iOS version. Unfortunately it is not replicable on all phones with those versions, so we haven't been able to replicate it on our test phones. It appears the issue is the ApplicationToken passed into ShieldActionExtension and ShieldConfigurationExtension does not match any of the ApplicationTokens that the user selected to block through FamilyControls. (The selected ApplicationTokens are being loaded through a group UserDefaults and they are indeed being loaded in the ShieldActionExtension in the bug reports).This is preventing the app from loading the correct settings and handling the blocking accordingly. I am trying to isolate this better with a new release with better logging, but would appreciate any help on this issue.

Hi all, I'm working on a really basic counter app as a way to explore SwiftData and have come across some behavior that I don't understand. I have a very simple App Intent that increments a user-specified counter in my app. The intent doesn't throw any errors and correctly updates the CoreData store but, when I switch back to my app from the Shortcuts app (where I'm testing the app intent), the view hasn't updated. Closing and re-opening the app shows the incremented counter value but I'd like to know if it's possible to have my app's UI update when the CoreData store is updated from outside the app without relaunching the whole app. For some brief context, here's my view and the App Intent: struct ContentView: View { @Environment(\.modelContext) private var modelContext @Query private var counters: [Counter] // ... var body: some View { NavigationStack { List { ForEach(counters) { counter in CounterRowItem(counter: counter) } .onDelete(perform: deleteItems) } // ... } } struct IncrementCounterIntent: AppIntent { static var title: LocalizedStringResource = "Increment Counter" @Parameter(title: "Name", optionsProvider: CounterOptionsProvider()) var name: String func perform() async throws -> some IntentResult & ReturnsValue<Int> { let provider = try CounterProvider() guard let counter = try provider.fetchCounters().first(where: { $0.name == name }) else { print("Couldn't find counter with name '\(name)'") return .result(value: 0) } counter.count += 1 try provider.context.save() return .result(value: counter.count) } private final class CounterOptionsProvider: DynamicOptionsProvider { func results() async throws -> [String] { try CounterProvider().fetchCounters().map { $0.name } } } }

I'm using the AppIntents framework introduced in iOS 16. My goal is to create an AppIntent that performs a long-running task but does open my app when run. When I run the Intent from the Shortcuts app, I see an error message that says the shortcut "was interrupted because it didn't finish executing in time." Is there a way to signal progress to the user of a long-running AppIntent or get more time from the system prior to the AppIntent being cancelled?

0 CoreText TDecorationRun::CalculateGlyphIntersections(CGAffineTransform, TRun const&, double, double, std::__1::function<void (double, double)> const&) const + 1704 1 CoreText TDecorationRun::CalculateGlyphIntersections(CGAffineTransform, TRun const&, double, double, std::__1::function<void (double, double)> const&) const + 1440 2 CoreText void TDecorationRun::DrawDecorationRun<(anonymous namespace)::TRunAdapter>(CGContext*, (anonymous namespace)::TRunAdapter, (anonymous namespace)::TRunAdapter, double)::'lambda'(CGPoint, CGPoint)::operator()(CGPoint, CGPoint) const + 508 3 CoreText TDecorator::DrawDecoration(TLineDrawContext const&, TLine const&, TInlineVector<DecorationOverride, 30ul> const*) + 2356 4 CoreText TLine::DrawUnderlines(CGContext*) const + 104 5 CoreText TLine::DrawGlyphs(CGContext*) const + 292

Hi, We've noticed that this issue occurs more frequently after upgrading to iOS 18.4.1 and can result in one-way audio. Our app uses CallKit with WebRTC to establish VoIP connections. However, on iOS 18.4.1, CallKit no longer triggers: func provider(_ provider: CXProvider, didActivate audioSession: AVAudioSession) We're currently comparing the occurrence rate across different iOS versions to better understand the impact. Could you please help analyze the root cause of this issue?

Hello, I’m working on implementing SB2420 compliance using the Declared Age Range framework. While referring to the documentation at https://developer.apple.com/documentation/declaredagerange, I couldn’t find details on how the TX region (transaction region or territory) is determined when using Declared Age Range. Specifically, I’d like to confirm the following points: How does the system determine the TX region when the user’s declared age range is retrieved? Is it based on the App Store region, the device locale, or the user’s Apple ID country? If the app’s backend needs to verify or log the TX region, is there a way to obtain or infer it from the API response or receipt data? Is there any difference in TX region determination between Sandbox and Production environments? If anyone has experience implementing Declared Age Range (SB2420) and handling region determination, I’d appreciate your insights or best practices. Thank you.

Triggered by Thread: 0 Thread 0 Crashed: 0 dyld 0x1a87922b0 lsl::PreallocatedAllocatorLayout<278528ull>::init(char const**, char const**, void*) + 436 1 dyld 0x1a878ba38 start + 1960 Thread 0 crashed with ARM Thread State (64-bit): x0: 0x2010003030100000 x1: 0x0000000fffffc0d0 x2: 0x0000000000000004 x3: 0x00000001a87607a9 x4: 0x0000000000000000 x5: 0x0000000000000000 x6: 0x0000000000000000 x7: 0x0000000000000000 x8: 0x2010003030100000 x9: 0x2010003030100000 x10: 0x000000016d923dfd x11: 0x00000001a87ccf30 x12: 0x0000000000000050 x13: 0x0000000000000044 x14: 0x0000000000052010 x15: 0x0000000000000000 x16: 0x0000000000000000 x17: 0x0000000000000000 x18: 0x0000000000000000 x19: 0x00000001801d0000 x20: 0x000000016d923b50 x21: 0x000000016d923af8 x22: 0x00000001e6184050 x23: 0x000000016d9237d8 x24: 0x0000000fffffc10c x25: 0x0000000000000000 x26: 0x0000000000000000 x27: 0x0000000000000000 x28: 0x0000000000000000 fp: 0x000000016d923870 lr: 0xb0228001a8792130 sp: 0x000000016d9237d0 pc: 0x00000001a87922b0 cpsr: 0x60001000 far: 0x00000001e61840e0 esr: 0x92000047 (Data Abort) byte write Translation fault Binary Images: 0x1a8758000 - 0x1a87db693 dyld arm64e <77c1eed22ed7396aba34e770120d81d4> /usr/lib/dyld 0x1024dc000 - 0x10594ffff main_executable_path_missing arm64 /main_executable_path_missing 0x0 - 0xffffffffffffffff ??? unknown-arch <00000000000000000000000000000000> ??? Error Formulating Crash Report: dyld_process_snapshot_get_shared_cache failed EOF crash.log

Hello, I’m building an app that helps people spend less time on social media apps. For that, I make heavy use of Apple’s Screen Time APIs, such as ManagedSettings and FamilyControls. When an app is locked using a ShieldConfiguration, the user has to open my app in order to unlock it (e.g. enter a code). This is very cumbersome because no documented API exists to open the parent app (=my app) from the ShieldActionDelegate (also part of my app) when the user presses a button of the ShieldConfiguration. The ShieldActionDelegate callback just offers three options in its ShieldActionResponse: .none .defer .close .openParentApp is missing. We are working around this limitation by sending a local push notification that the user has to tap on. This has multiple drawbacks: It has to be ensured that notification permission has been granted. It has to be ensured that notifications can be delivered even while focus is enabled. Features such as Apple Intelligence notification summaries and notification prioritization can heavily delay delivering notifications and thus frustrate the user. Neither my users nor myself do understand why this is not possible in a smoother way, at least according to the documentation. There are 3rd party apps that have such functionality, they can directly open their own app from a button press in the Shield, see here: https://apps.apple.com/us/app/applocker-passcode-lock-apps/id1132845904 It would be great if Apple could level the playfield for all developers and document how this is achievable, because technically it clearly is. Thanks a lot and have a great day!

I have universal links configured for my iOS app which work as expected when the app is installed. When the app is not installed the universal link will go to the browser as expected. What I want to do is redirect to the app store, allow the user to install the app, then redirect them to the initial universal link. Redirecting them to the app store isn't the hard part I can achieve that from the webpage, however I don't know how to save a reference to that initial link to redirect them once they instal the app. What I want the flow to be for a user who doesn't have the app is: visit a universal link (example.com/UUID) redirect to the app store and install the app open the app and redirect to example.com/UUID I've seen some ways people are doing this with the clipboard but I don't love that solution, I also don't want to use a 3rd party service if I can avoid it - how are the 3rd party services making this happen?

ios ipad 18.3 on iPad 7. generation sound is missing - in YouTube the advertising videos never starts

I have an app using weatherkit and its currently live and up on the app store, recently I had some users report to me that they had been receiving errors loading weather data, I had error handling built in and it reported an issue with apples authentication server Failed to generate jwt token for: com.apple.weatherkit.authservice with error: Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" I have not come across this during the development lifecycle of my project, there where no codebase changes, it just stopped functioning. The app entitlements are valid and correct, Weatherkit is enabled in both xcode and across my Certs, identifiers and profiles. I was not experiencing this issue until I reinstalled the app from the app store completly by first removing it and then re-installing fresh. Hard reboots do not help and I do not want to start suggesting to my users to factory reset their devices. We are using WeatherKit in both our main app and widget, relying entirely on Apple’s framework for authentication and token management. We do not generate or inject our own JWT tokens; all token handling is managed by WeatherKit. We have implemented a debug menu with the following actions: Clear WeatherKit JWT tokens from the keychain Clear all related UserDefaults key Clear all app group data and all UserDefaults. Perform a “nuclear” cache clear (removes all app data, keychain, and cached files). We log all WeatherKit fetch attempts and failures, including authentication errors, both in the app and widget and get nothing but code 2. We have attempted all of the above steps, but continue to experience issues with WeatherKit JWT authentication We would appreciate any guidance or insight into what else could be causing persistent WeatherKit JWT/authentication issues, or if there are any additional steps we should try. P.S. - Tested and experiencing the same issues on an iPhone 15 Pro Max and iPhone 15 The Pro Max is on the iOS 26 Beta // and the 15 is on the latest iOS 18

I’m developing a self-management app using Family Controls, but I’ve encountered a FamilyActivityPciker's crash due to an XPC(or UIRemoteView) issue when there are too many tokens(maybe 200+ items) in a category. This makes bad UX, so I’m looking for a workaround. (I guess that the crash reason is cross process memory limitations, such as App Extension 50MB memory limitation.) A lot of web domains contribute to increase the number of tokens, However, even after clearing Safari’s browsing history, the tokens displayed in the FamilyActivityPicker remains unchanged. Is there any workaround that a 3rd party developer can implement to address this issue? prevent FamilyActivityPicker crashes or reduce the number of web domain tokens? For example, if there’s a way to reset the web domain tokens shown in FamilyActivityPicker from the Settings app, I could offer a help to users. Does anybody have ideas? Expanding SNS Category (29 items) It succeeded. Expanding Productivity & Finance (214 items) It failed. The screen froze, then appears blank. When the number of items is around 100, the crash rate is 50%, but when the items are over 200, the crash rate is 100%. Search Bar Problem The search bar also has same problem. If the number of search results are small, it works good without any blank, but if there are a lot of search results (200+), the XCP crashes and the screen appears blank. Code to Reproduce import SwiftUI import FamilyControls struct ContentView: View { @State private var selection = FamilyActivitySelection() @State private var isPickerPresented: Bool = false var body: some View { VStack { Button("Open Picker") { isPickerPresented = true } } .familyActivityPicker(isPresented: $isPickerPresented, selection: $selection) } } Steps to Reproduce Prepare a category that has 200+ items Try to open the category in the picker The screen will freeze, then appears blank. Errors in Console [u EDD60B83-5D2A-5446-B2C7-57D47C937916:m (null)] [com.apple.FamilyControls.ActivityPickerExtension(1204)] Connection to plugin interrupted while in use. AX Lookup problem - errorCode:1100 error:Permission denied portName:'com.apple.iphone.axserver' PID:2164 ( 0 AXRuntime 0x00000001d46c5f08 _AXGetPortFromCache + 796 1 AXRuntime 0x00000001d46ca23c AXUIElementPerformFencedActionWithValue + 700 2 UIKit 0x0000000256b75cec C01ACC79-A5BA-3017-91BD-A03759576BBF + 1527020 3 libdispatch.dylib 0x000000010546ca30 _dispatch_call_block_and_release + 32 4 libdispatch.dylib 0x000000010546e71c _dispatch_client_callout + 20 5 libdispatch.dylib 0x00000001054765e8 _dispatch_lane_serial_drain + 828 6 libdispatch.dylib 0x0000000105477360 _dispatch_lane_invoke + 408 7 libdispatch.dylib 0x00000001054845f0 _dispatch_root_queue_drain_deferred_wlh + 328 8 libdispatch.dylib 0x0000000105483c00 _dispatch_workloop_worker_thread + 580 9 libsystem_pthread.dylib 0x0000000224f77c7c _pthread_wqthread + 288 10 libsystem_pthread.dylib 0x0000000224f74488 start_wqthread + 8 ) Error acquiring assertion: <Error Domain=RBSAssertionErrorDomain Code=2 "Specified target process does not exist" UserInfo={NSLocalizedFailureReason=Specified target process does not exist}>

Hello, I think it is quite a common use-case to open the parent app that owns the ShieldActionDelegate when the user selects an action in the Shield. There are only three options available that we can do in response to an action: ShieldActionResponse.none ShieldActionResponse.close ShieldActionResponse.defer It would be great if this new one would be added as well: ShieldActionResponse.openParentApp While finding a workaround for now, the problem is that the ShieldActionDelegate is not a normal app extension. That means, normal tricks do not work to open the parent app from here. For example, UIApplication.shared.open(url) does not work because we can’t access UIApplication from the ShieldActionDelegate unfortunately. NSExtensionContext is also not available in the ShieldActionDelegate unfortunately, so that’s also not possible. There are apps however, that managed to find a workaround, in my research I stumbled across these two: https://apps.apple.com/de/app/applocker-passcode-lock-apps/id1132845904?l=en-GB https://apps.apple.com/us/app/app-lock/id6448239603 Please find a screen recording (gif) attached. Their workaround is 100% what I’m looking for, so there MUST be a way to do so that is compliant with the App Store guidelines (after all, the apps are available on the App Store!). I had documented my feature request more than 2 years ago in this radar as well: FB10393561

I’m hitting a WeatherKit JWT failure (WDSJWTAuthenticatorServiceListener Code = 2) at runtime even though the entitlement is present in both the signed binary and the embedded provisioning profile. Environment Team ID 5SZLQLQ9MD Bundle ID ParkProfessor.ParkProfessorDisneyland Device / OS iPhone 15 Pro · iOS 17.4.1 (hardware, not simulator) Xcode 15.3 (15E204a) Console output Failed to generate jwt token for: com.apple.weatherkit.authservice Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" Entitlement & profile snippets codesign -d --entitlements :- WeatherKitTest.app | grep -A2 weatherkit com.apple.developer.weatherkit security cms -D -i embedded.mobileprovision | grep -A2 weatherkit com.apple.developer.weatherkit What I’ve already tried Regenerated a new development certificate and a new iOS App Development provisioning profile with WeatherKit enabled. Confirmed the capability is selected in Certificates ▸ Identifiers ▸ Profiles and added in Xcode target settings. WeatherKit Terms of Service accepted in the portal. Deleted the app, removed any device management profiles, rebooted the phone, clean-built & ran again. Reproduced the issue in a minimal SwiftUI app that calls: WeatherService.shared.weather(for: CLLocation(latitude: 33.8121, longitude: -117.9190), including: .current) – same Code 2 error. Request It looks like the App ID may need a backend entitlement sync. Could someone from the WeatherKit team please check the status for Team 5SZLQLQ9MD, Bundle ID ParkProfessor.ParkProfessorDisneyland and enable WeatherKit token generation? Thanks!

We persist ApplicationTokens in a storage container that ShieldConfigurationExtension has access to. In rare, cases all the ApplicationTokens for a user seem to change. We know this because the Application parameter passed into configuration(shielding application: Application) -> ShieldConfiguration function has a Token that does not match (using == ) any of the ones we are persisting in storage. Interestingly, the persisted ones still work, so I don't believe storage has gotten corrupted or anything. We can use them to add or remove shields, we can use them to display labels of the apps they represent, etc. But they don’t match what’s passed into the ShieldConfiguration extension. If the user goes into the FamilyPicker at this point and selects an app of a token that we are already persisting, the FamilyPickerSelection will have a token matching the new one that is passed into ShieldConfigurationExtension, not the one we persisted when they last selected that app. This leads me to believe the tokens are updated/rotated in some cases. When and why does this happen, and how can we handle it gracefully?

Hello, The purpose of "Screen Time Passcode" under Settings/Screen Time is to protect Screen Time preferences and it is asked every time the user updates Downtime, App Limits, Content & Privacy Restrictions and so on. But the private passcode is not requested if the user disables Screen Time for a particular app (only Face ID or phone passcode is requested, but not the private Screen Time passcode). I think this is a mistake, I think the purpose of a private Screen Time passcode is to protect all settings, including apps that use this API, right? Is there any solution to this? Thank you.

Hello! I am experiencing some strange bugs around DeviceActivityEvents: When creating a DeviceActivityEvent we can assign a threshold and applicationTokens. The idea is, that after the user has spent said threshold on said apps, eventDidReachThreshold is called. includesPastActivity is set to false. On iOS 26 however, it happens (quite reliably after updating to a new beta seed) quite often that eventDidReachThreshold is called immediately (after a couple of seconds) instead of waiting for the threshold to be met. Is anyone else seeing similar issues on iOS 26? Only workaround I have found is to ask users to re-grant Screen Time permissions. This only holds for about two weeks though or at most until the next iOS 26 beta update is installed. Feedback filed under: FB18061981 FB18927456