Hey all — hoping someone here has dealt with this before. I’m testing an iOS app via TestFlight, and when I originally got access, I didn’t have an iPhone. So I signed in with my Apple ID on my girlfriend’s iPhone and used TestFlight there. Everything worked fine. Now I finally have my own iPhone (iPhone 16), downloaded TestFlight, signed in with the same Apple ID, and had the developer resend the invite. But when I tap "Open in TestFlight" from the invite email, I get this error: “Couldn’t load app because your Apple account has already been associated to this app.” The dev tried removing me as a tester and re-adding me, I’ve deleted TestFlight from both phones, rebooted, reinstalled, waited in between — still no luck. Even tried opening the invite link in Safari instead of Mail. Is there any way to get Apple to fully reset the association with the old device so I can use TestFlight on my new iPhone? Or do I really need to make a new Apple ID just to get around this? Any help would be huge — thanks!

I have a question about Developer Mode on iPhone. Currently, the home button on my iPhone SE (2nd generation) is broken, so I use AssistiveTouch to display a virtual home button. However, in Developer Mode, the virtual home button does not appear, making it impossible to enable Developer Mode. Is there any way to enable Developer Mode in this situation?

有在Info.plist配置权限使用说明（NSLocalNetworkUsageDescription），App本地网络权限也已经打开，但App请求局域网设备接口时，仍返回异常： Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo={_kCFStreamErrorCodeKey=50, NSUnderlyingError=0x302d79d40 {Error Domain=kCFErrorDomainCFNetwork Code=-1009 "(null)" UserInfo={_NSURLErrorNWPathKey=unsatisfied (Local network prohibited), interface: en0[802.11], ipv4, uses wifi, _kCFStreamErrorCodeKey=50, _kCFStreamErrorDomainKey=1}}, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask .<1>, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask .<1>" ), NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLStringKey=http://192.168.1.1:80/xxx, NSErrorFailingURLKey=http://192.168.1.1:80/xxx, _kCFStreamErrorDomainKey=1}

We have a password entry field with a "show password" button. The button effectively turns the "secure text entry" textfield into a non-secure text entry field allowing the user to view what they typed in. When VoiceOver is enabled, I am not including that button in the UI; it doesn't seem to make sense to me for the following reasons. If you properly test with the screen curtain, the functionality is useless. You don't see anything. I've tried to explain this to my accessibility team. It's also quite ridiculous to offer to show a blind user their password, I'm sure they'd love to see it, but they just can't. This would almost seem insulting as well. If by toggling that button, and turning a secure text entry into a non-secure text entry, now the app is literally speaking their password aloud. This seems like a security vulnerability to me. What if someone else overhears the password spoken aloud. The accessibility team is insisting that I need to include the "show password" button when VoiceOver is enabled. This is the response I received. "functionality should be the same for VI users as for sighted users. It may happen that a VI user wants to check what is typed into password field in order to correct mistakes". Again, I don't agree with that because functionality should not be the same. Functionality should be changed and altered as necessary to make the user experience as accessible as possible. And in this scenario, to me the functionality doesn't make sense at all in a VoiceOver setting. Any thoughts on this? Am I incorrect here? Are there benefits of including a "show password" button to a user utilizing VoiceOver? What should then the functionality be? Speak the password aloud? Thanks.

I can no longer specify more than 10 items to be shown in the Recent Items menu. The control to set "Recent documents, applications and servers" seems to have vanished from System Settings.

Hi Guys, I've been trying for two weeks to sign up for the Apple Developer program. I've tried to pay the $99 but it didnt go off my account. Now my accoun tis in pending mode and there is no response from apple support. I've ogged about 10 tickets over the past two weeks. Any advice here? I am getting desperate.

Hello, I have the following problem. I’m developing a NoCode app using the FlutterFlow platform and have been working on it for over a year. This time, after publishing a new version of the app through FlutterFlow, I tried logging into Apple Store Connect, but I got an error saying that I had made too many login attempts and needed to try again later. However, I hadn’t attempted to log in before that at all. No matter how long I wait—24 hours, 48 hours—the same error keeps appearing, meaning I still can’t access my account. Apple Support hasn’t responded for 4 days, and in total, I’ve been locked out of my account for over 9 days. Please help me understand what might be causing this issue. Apple Store Connect refuses to send me an SMS with the login code.

When using an app via external keyboard, FocusState and .focused used to work just fine until iOS17. Vertical-axis textfields were also accessible without any issues. But after iOS18 update, adding focused modifier removes elements out of focus order of external keyboard. 1 such example is -when a button using focused modifier and @FocusSate is inside a ScrollView and if this view is getting opened via NavigationLink, that button is not accessible via Bluetooth (external) keyboard. TextEditor / Vertical-axis TextFields also seem to be impacted in external-keyboard-focus-order when added inside ScrollView. Is this a known iOS18 issue with ScrollView / any tip to get this fixed ? Sample code that can reproduce this issue: struct ContentView: View { @State private var showBottomSheet: Bool = false @State private var goToNextView: Bool = false @FocusState private var focused: Bool @AccessibilityFocusState private var voFocused: Bool var body: some View { NavigationView { VStack { Text("Hello, world!") // This button works fine in Bluetooth keyboard in all versions Button("Trigger a bottomsheet") { showBottomSheet = true } .focused($focused) .accessibilityFocused($voFocused) Button("Goto another view") { goToNextView = true } NavigationLink( destination: View2(), isActive: $goToNextView ) { EmptyView() } .accessibility(hidden: true) } .sheet(isPresented: $showBottomSheet, onDismiss: { focused = true voFocused = true }, content: { VStack() { Text("Hello World ! I'm in a bottomsheet") Button("Close me") { showBottomSheet = false } } }) .padding() } } } #Preview { ContentView() } struct View2: View { @FocusState private var focused: Bool @AccessibilityFocusState private var voFocused: Bool @State private var showBottomSheet: Bool = false var body: some View { ScrollView { VStack { Text("check") // In iOS18, this button doesn't get focused in Bluetooth / external keyboard // This issue occurs when these 3 combine in iOS 18 - a button using FocusState inside a view that has a ScrollView & it is opened via NavigationLink Button("Trigger a bottomsheet") { showBottomSheet = true } .focused($focused) .accessibilityFocused($voFocused) Button("Test button") { } } .sheet(isPresented: $showBottomSheet, onDismiss: { focused = true voFocused = true }, content: { VStack() { Text("Hello World ! I'm in a bottomsheet") Button("Close me") { showBottomSheet = false } } }) .padding() } } }

Hey everyone! I am developing a screen time limit app to help people spend less time in distracting apps. It works this way: people choose unhealthy apps for them and opposite productivity apps. In the app you can exchange time spent on healthy habits to scroll or use other distracting apps. This idea was loved by social media, and the app already has 100k followers on social media without even being launched yet. So I am waiting just for one feature permission from Apple, and they have not given me any answer since I applied 3 weeks ago. There are a lot of similar apps on the market, and this feature exists in other screen time limit apps. Why is app blocking permission needed? Time Exchange Functionality: Users independently select which apps are productive and which are distracting for them. The system blocks the "negative" apps until the user accumulates enough time in the "positive" ones. This encourages healthy device usage. Full User Control: All apps to be blocked are manually selected by the user in the settings. The extension does not impose any restrictions without explicit permission. Transparency and Security: Blocking happens locally, with no data collected about app usage. We adhere to Apple’s privacy policy. Compliance with App Store Guidelines: We understand that app blocking is a sensitive feature, but in our case it: Is used for the benefit of the user (digital detox, productivity improvement). Does not interfere with system processes or other developers’ apps. Does not misuse access to APIs. My question to the forum is: Did you have similar problems, and how did you resolve them? Are there any ways to speed up the process or contact someone from the approval team directly? Should I give up and release it on Android? I am very disappointed and frustrated. Hope to get some useful tips. Thank you very much!

When my macOS Cocoa app displays a modal alert with beginSheetModal(for:completionHandler:), VoiceOver sometimes seems to focus on an "illegal" upper level, where any attempts at navigation will give the unhelpful response "Alert, dialog", until you "drill down" with VO + shift + down or switch apps. After that, things will work as expected. Is this a known bug? Does it happen to anybody else, or am I doing something wrong?

Hey, We've run into an issue where WKWebView contents are not always available for VoiceOver users. It seems to occur when WKWebView contents are loaded asynchronously. I have a sample project where this can be reproduced and a video showing the issue. See FB21257352 The only solution we currently see is forcing an update continuously using UIAccessibility.post(notification: .layoutChanged, argument: nil), but this is ofc a last resort as it may have other unintended side effects.

System settings => Accessibility => System Voice => the little (i) beside the pulldown => Voices => THIS SCREEN will allow you to download Premium Voices Is there a way to trigger this screen programmatically. Or at least a link to get my users there without having to dig thru that swamp of screens?

I want to understand which component types are intended to have an associated hint text, haptic feedback, or earcon associated with it for VoiceOver screen reader users. Is there a list somewhere or a HIG guideline for which transition types should have a sound? Some transitions in Apple apps generally include different beep sounds, such as opening a new screen screen dimming when a VoiceOver user swipes from the header / navbar to the body a scraping sound when swiping up or down a page. the beginning or end of the body section in Calculator when swiping from one row to the next. opening a pop up menu I would also appreciate any direction on what code strings are associated with these sounds and how custom components can capture these sounds or haptics or hints where it is expected? On the other hand, I don't want to get that info and then dictate that every component needs a specific beep type since these sounds appear to be used for specific purposes.

I am facing issue of back camera in my iphone 14 plus it is showing the black screen and my iphone is manufacture between april 2023 to april 2024 but its still not eligible for apple program my phone is also getting same issue why its not eligible for it

Hello, I'm observing a persistent and frustrating issue with an accessibility feature called Guided Access that seems to affect many users across different devices and iOS versions. Problem The triple-click gesture (side or home button) to activate Guided Access intermittently stops working after the device has been in normal use for a few days (typically 2-7 days) without a restart. I have done some debugging for Apple in FB16094026 but received no updates after 6 months. So I'm posting here in the hope that this will be solved sooner. A core accessibility feature shouldn't require daily device restarts to function reliably. Details: Guided Access is correctly enabled in Settings > Accessibility. Initially, the triple-click works perfectly. After a period of normal device use (2-7 days), the triple-click no longer triggers Guided Access in any app. Restarting the device temporarily resolves the issue, and Guided Access triple-click works again immediately after a reboot. However, the problem recurs after continued use. Simply toggling the Guided Access setting on/off does NOT fix it. Additional observation: Even trying to select Guided Access manually via the Accessibility Shortcut menu (if multiple shortcuts are enabled) sometimes fails to launch the feature when in this state. Affected: iPhones and iPads Observed on iOS/iPadOS 16, 17, and now 18, indicating it's a long-standing bug. Impact: Guided Access is a crucial accessibility feature for many users (for focus, special needs, parental controls, etc.). Its unreliable activation significantly disrupts daily workflows and reliance on this function. This issue appears to be widespread, with many reports across forums like Apple Support Communities and Reddit. For example, this post received over 1k upvotes. To see more examples please refer to FB16094026. Could Apple please investigate this bug urgently? Thanks.

I'm facing a bizarre issue with the Apple's Accessibility APIs. I am registering an AXObserver that listens for, among other things, the kAXSelectedTextChangedNotification. For many new users, the kAXSelectTextChangedNotification is not triggered, even though they have enabled Accessibility permission for the app. Other notifications are getting through (kAXWindowMovedNotification, kAXWindowResizedNotification, kAXValueChangedNotification etc - full list here), just not the kAXSelectedTextChangedNotification! We've found that we can reproduce the error by removing accessibility permission for the app and rebooting our computers. After restarting and reenabling accessibility permissions, the kAXSelectedTextChangedNotification was not received, even though other notifications were fine. Strangely, the issue can be resolved by launching Apple's Accessibility Inspector app on an impacted computer. Once the Accessibility Inspector is loaded, the kAXSelectedTextChangedNotifications start coming through as expected. This implies to me that either: We are missing some needed setup when starting the observers. Accessibility Inspector gets it right, thus ‘starting’ the system properly. Accessibility Inspector is using some Apple private APIs that we don’t have access to. Things I’ve tried: I've tried subscribing the AXSelectedTextChangedNotification to different AXUIElements, including the SystemWide element, the Application element, and children elements from the AXApplication. None of these received the kAXSelectedTextChangedNotification, until Accessibility Inspector is booted up. No surprises here, as Apple's documentation confirms that you should add the notification to the root Application AXUIElement if you want to receive notifications for all its children. I had a theory that the issue might be due to my code calling AXUIElementCreateApplication multiple times, possibly creating multiple "Applications" in Apple's Accessibility implementation. If that’s the case, the notifications might be sent to the wrong application AXUIElement. However, refactoring my code to only call AXUIElementCreateApplication once didn't resolve the issue. I thought the issue may be caused by subscribing the AXSelectedTextChangedNotification on the high-level application element (at odds with Apple's documentation). I've tried traversing the child AXUIElements until we find one with the kAXSelectedTextAttribute and then subscribing to that. This did not resolve the issue. I don’t think it's the correct path to continue exploring, given that the notifications are received correctly after AccessibilityInspector is launched. There is one exception to the above: if I add the kSelectedTextChangedNotification listener to a specific text field AXUIElement, I do receive the notification on that text field. However, this is not practical; I need a solution that will work for all text fields within an app. The Accessibility Inspector appears to be doing something that causes the selected-text-changed notifications to be correctly passed up to the high-level application AXUIElement. Another thought is that I could traverse the entire Accessibility hierarchy and add listeners to every subview that has the kAXSelectedTextAttribute. However, I don’t like this long-term solution. It will be slow and incomplete: new elements get added and removed frequently. I just want the kAXSelectedTextChangedNotification to be received by the high-level Application AXUIElement, which the documentation suggests it should be. I also have evidence that this can work, since notifications start coming through after Accessibility Inspector is launched. It’s just a matter of discovering how to replicate whatever Accessibility Inspector is doing. An interesting wrinkle: I implemented the 'traverse' strategy above, but was surprised by how few elements were in the hierarchy. Most apps only go down ~2-3 levels, which didn't seem right to me. Perhaps the Accessibility tree isn't fully initialized? I tried adding a 5-second delay to allow more initialization time, but it didn't change anything. Does anyone have any ideas? Here's our file.

The AVSpeechSynthesizer on some iOS 18 device has a bug that it will read always read Chinese of: AVSpeechUtterance(string: "中文") // Any Chinese Content in the dialect specified by: Settings > Accessibility > Spoken Content > Voices > Chinese > Spoken Language instead of the dialect that I specified in AVSpeechUtterance.voice: AVSpeechSynthesisVoice(language: "zh-HK") // Cantonese AVSpeechSynthesisVoice(language: "zh-TW") // Mandarin However, setting Chinese dialect of AVSpeechSynthesisVoice by "zh-HK" or "zh-TW" has been working on iOS 17 and below. My app has a feature that requires reading sentences in Mandarin followed by Cantonese, i.e., both dialects is needed every time. Therefore, setting the dialect in Spoken Language of Settings is not a workaround to make my app to function correctly in iOS 18. Further to the above, I've also discovered that, if iOS 18 (in my case, 18.5 is tested) is freshly installed (not upgrading from iOS 17 or below, nor restoring backup after fresh installation of iOS 18), the bug above will not happen. However, if it was an upgrade from iOS 17 or below, or backup is restored (in my case, I freshly installed iOS 18.5 on a new iPhone and then restored a backup from another iPhone on iOS 16.2), the bug above happens. This bug puzzled me because I need both dialect of Chinese to be read aloud one by one, but as reported by many users, on most iOS 18 devices (since a fresh installation of latest iOS without upgrading or restoring is uncommon nowadays), my app will read Cantonese two times or Mandarin two times (depending on Spoken Language in Settings). It is the iOS 18 bug which made my app unable to perform the expected behavior. Would Apple developers look into this and advise if there are any possible workaround within the code of app to overcome this bug, or please fix this bug with an iOS 18 update. Thank you.

Your app's binary includes references to HealthKit components, but the app still does not appear to include any primary features that require health or fitness data. Next Steps To resolve this issue, please remove any HealthKit functionality from the app, as well as any references to this app’s interactivity with HealthKit from the app or its metadata. This includes removing any HealthKit-related keys in the app's Info.plist or InfoPlist.strings files, as well as removing any calls to HealthKit APIs, including those from third-party platforms, from the app.

before I start this could just be me and handful of people but I like to reorganize my phone screen to my needs based on what’s going on in life. I was jaut thinking it would be easier if u could get rid of all the folders at once then reorganize or something easier than this long extensive process it is now.

写了个自己用的app，在自己手机上测试中，隔一周左右就打不开了，显示不再可用。 ps.没花钱买开发者账号，app也不打算发布。