We are currently supporting an Apple Pay-enabled card program as an issuer/issuer processor and have successfully completed In-App Push Provisioning integration within our iOS application. The in-app flow is fully operational, including issuer-side cryptographic exchange and Mastercard MDES network tokenization. We are now looking to extend this integration to support Apple Pay Web Push Provisioning, allowing cardholders to add eligible cards to Apple Wallet directly from our web application. We would appreciate guidance on: -The process for enrolling in Apple Business Register (if required) -Enabling Web Push Provisioning for an issuer profile Required entitlements or provisioning certificates Any additional onboarding steps specific to issuer-level Web provisioning We understand that Web Push Provisioning requires issuer-level enablement beyond standard Apple Pay on the Web, and we would like clarification on the correct path to activate this capability. Thank you in advance for your guidance.

Hi everyone, We’ve recently run into an issue with Apple Pay on the web and would appreciate some clarification. Background: Previously, we integrated Apple Pay without using the Apple Pay JS SDK. We relied on ApplePaySession.canMakePayments() to check availability, and it worked fine. After Apple announced support for browsers beyond Safari, we switched to the Apple Pay JS SDK. According to Apple’s documentation, we should now use applePayCapabilities() for capability checks in third-party browsers. Our current behavior: We implemented applePayCapabilities(). Initially, it was returning either paymentCredentialStatusUnknown or paymentCredentialsUnavailable. Based on those values, we displayed the Apple Pay button. The problem: About a week ago, on the same device/browser, applePayCapabilities() started returning applePayUnsupported. Setup: MacBook Pro 13-inch (M1, 2020), Google Chrome Version 136.0.7103.93. The Apple documentation says: “Don’t show an Apple Pay button or offer Apple Pay” when the result is applePayUnsupported. However, at the same time, canMakePayments() is returning true. This creates a direct conflict between the two recommendations: canMakePayments() → true ⇒ show the button. applePayCapabilities() → applePayUnsupported ⇒ don’t show the button. Question: What’s the correct approach here? Should we prioritize applePayCapabilities() and hide the button, or is it acceptable to continue relying only on canMakePayments() as the source of truth for showing Apple Pay? Any insights from others who’ve run into this contradiction would be very helpful. Thanks in advance!

Steps to Reproduce 1. Create a native UIViewController with a WKWebView, loading test-1.html (contains position:fixed header that displays correctly). 2. Push another UIViewController also with a WKWebView, this time loading test-2.html. 3. In test-2.html, tap into the to summon the on-screen keyboard. 4. Without calling blur(), perform an interactive swipe-back gesture to go back to the first view controller. 5. Observe that the fixed header in test-1.html is now offset downward by approximately the height of the keyboard and does not return to its original position. demo-link : https://bugs.webkit.org/attachment.cgi?id=476324

I'm developing a web extension for Safari on iOS using MV3. The extension is working fine in Chrome, but in Safari I experience some seemingly random issues. I would like to debug it, but here is my problem. I have my iPhone connected via cable to Mac, and it works fine with XCode, so I assume this part is OK. I open Safari or Safari Tech Preview (doesn't matter) on my Mac, developers options are enabled, and in the Develop menu, under my iPhone section, there are things I can debug. There is an entry "[Ext name] - Extension Service Worker" but when I click it, it's empty. Web inspector pops up, but there are no network requests, no logs, nothing. I know the extension is working, because I can stream log to my HTTP server, but I don't see them here at all. I can use console to trigger commands like chrome.storage.local.get(null, console.log) and it shows my local store, so why I don't see any logs? Also, the background script is not visible in the Sources tab, just one weird request: navigator.serviceWorker.register('safari-web-extension://E3449EA7-EC25-4696-8E6C-[ID HERE]/background.js'); </script> Any ideas what went wrong? The entire team of 4 people has the same issue and we can't move forward because of that. Also, the Develop => Service workers or any other menu section doesn't show my service worker. Logs for websites running on my phone are visible and in general web inspector for them works fine.

Is ServiceWorker supported on WKWebView? As per Mozilla Developer Network(MDN Web) docs[1] its not supported, but our research shows that ServiceWorker becomes available for a domain in WKWebView 1) if the domain is allowlisted in app-bound domains[2] or 2) if app is registered as default browser(this can not be considered for our app as its not a browser). How to enable ServiceWorker on WKWebView? Is adding domain as app-bound domain the right/only way to enable ServiceWorker on WKWebView? We didn't find any official documentation about this. Can WebView get ServiceWorker support by default without enabling app bound domains since that is not an option for our app? Our app needs to support more than 10 domains. Powerful APIs such as JavaScript injection, cookie manipulation, event handlers are by default available to all domains/WebView instances even if App doesn't enable app-bound domains. Is it possible to do same for ServiceWorker? If ServiceWorker can not be supported by default then can Apple provide a feature by which ServiceWorker will be enabled in App for all the domains? Apple enforces maximum of 10 app-bound domains. Is it possible to remove this limit and provide a way to dynamically add to this list at the time of a request? [1] https://developer.mozilla.org/en-US/docs/Web/API/ServiceWorker#browser_compatibility [2] https://webkit.org/blog/10882/app-bound-domains/

I don't think the issue is specific iOS 18. We have a web application that runs with IIS Authentication of Windows and Anonymous. Initially the app opens and the user clicks a button and triggers the "401 Challenge" via ASP.NET. The browser presents the Active Directory login, user enters credentials, clicks Sign In, and the browser hangs (may actually be negotiating something). After a few minutes the user is logged into the application. We have done a number of google searches/AI to try to determine what to change and there is no clear solution. Is there anything else to try? This problem is not seen in Chrome on iOS or on a Windows machine. Strangely it is also not seen using BrowserStack with one of their "real" devices. We have other apps that run with just Windows Authorization and this problem is not observed.

overflow-x: clip; will also apply clipping on the Y-axis. The correct implementation of this should only affect the X-axis. This is correctly implemented in all browsers except for Safari

I'm building a progressive web app (PWA) and came to the conclusion that almost nobody knows that this feature exists - Add to Home Screen. Not many people even understand what a PWA is or that you can add it to the home screen. This feels unnatural compared to installing an app from a store. Why do we make it so hard for users? Could we not make this easier by having the ability to call this installation or show an install notification? Right now, when users visit a PWA on iOS, there's no way for developers to let them know they can install it. The "Add to Home Screen" option is tucked away in the Share menu, and most users never find it. I'd really like to be able to show them a friendly prompt. Comparing to other browsers, this is possible via the beforeinstallprompt event. This would make a huge difference for user experience. Right now the only way is to show iOS users a separate set of instructions with screenshots, which feels clunky compared to what's possible on other platforms. I'm curious - is there any reason why this hasn't been added to Safari yet? Other browsers have supported this for years now. Is there any progress being made on this, or is it being considered for the roadmap? It would be really helpful to know if this is something that will be worked on in the future. I know there's a lot on the roadmap, but this would really help developers create better installation experiences for our users. Thanks for considering this!

Hi all, With version 18.4 beta, I have a problem with the display of webviews in the app. In particular, the app of my bank has webviews inside it, and as they are not loading, I am unable to access it. Can you help me? Thank you.

Hello Apple Developer Community, I'm experiencing an issue with PDF link interaction in WKWebView that appears to be specific to iOS 26. Problem Description: I'm loading a PDF in WKWebView.The links may vary widely and are not necessarily DPF, so I need to load them using WKWebView. On iOS versions prior to 26, links within the PDF are clickable and work correctly. On iOS 26, the same links are not clickable (no response when tapped). Expected Behavior: PDF links should remain clickable and functional across all iOS versions. What I've Tried: Tested opening the PDF directly in Safari on iOS 26 - links still not clickable This suggests the issue might be related to changes in the system's PDF rendering engine Reproduction Steps: Load the PDF URL in WKWebView Navigate to page 12 Attempt to tap the link Environment: Test Devices: iPhone 15(26.0 ) / iPhone 16 Pro Max(18.0.1 ) Xcode: 16.2 Questions: Is this an intentional change in iOS 26's PDF handling or WKWebView? If so, is there a new API or configuration to restore link interactivity? Any guidance or suggestions would be greatly appreciated!

Hi everyone, I'm exploring the new app icon appearance options (Clear, Dark, Tinted) for Progressive Web Apps (PWAs) on iOS26, iPadOS26, and macOS26. Currently, PWA icons don't seem to render well with these new appearances, particularly in Clear and Tinted modes, resulting in very very poor visual quality. You can hardly see anything. Has support for these icon appearances been fully implemented for PWAs? If so, could someone point me to the relevant Apple Developer documentation or provide guidance on how to configure PWA icons to support Clear, Dark, and Tinted appearances? I've searched the Apple Developer Forums, Stack Overflow, and Reddit but haven't found clear information on this topic.A possible solution is a png file with transparent areas, but if the pattern is dark, nothing will be visible in dark mode. Any insights or resources would be greatly appreciated. Thanks! (plz don't give up on PWA😭) Reference: https://developer.apple.com/forums/thread/761615 https://stackoverflow.com/questions/78780916/is-there-a-way-to-provide-light-dark-and-tinted-variants-of-apple-touch-icon https://developer.apple.com/library/archive/documentation/AppleApplications/Reference/SafariWebContent/ConfiguringWebApplications/ConfiguringWebApplications.html

I want to print the content of a WKWebView. I've done some searching, and many people have struggled with this over the years. Some claimed success, but their solutions don't work for me. One person created images for each pages and printed that, but then if you were to print to PDF, you'd get a PDF containing images rather than text. If I just call the printView(_:)) method of the view, I get blank pages. With the following more elaborate code, I get a partial printout, 11 out of what should be about 13 pages. let info = NSPrintInfo.shared info.topMargin = 72.0; info.bottomMargin = 72.0; info.leftMargin = 72.0; info.rightMargin = 72.0; info.isVerticallyCentered = false; info.isHorizontallyCentered = false; info.horizontalPagination = .fit; info.verticalPagination = .automatic; let printOp = webView!.printOperation( with: info ) printOp.canSpawnSeparateThread = true printOp.view?.frame = NSMakeRect( 0, 0, info.paperSize.width, info.paperSize.height ) printOp.runModal(for: webView.window!, delegate: self, didRun: nil, contextInfo: nil ) When I run the above under the debugger, I see console messages saying CGContextClipToRect: invalid context 0x0. Once the print dialog appears, if I touch (but not change) the selected printer, then the page count changes to the correct value.

hi Testing on OS26 Public Beta 6. In Safari, if you enter x homepage and scroll, the tab bar sticks to the bottom and moves. Make the keyboard appear in the search window When scrolling down on the Safari homepage again, the issue of not being able to stick to the bottom appears. Is it because the liquid glass UI was applied this time? and safari bug? Please let me know if I'm missing anything

I'm testing web extension to safari on iOS. I've built and added extension application to simulator, but on safari settings shows no extensions. I'm using Xcode 16.3 beta 2 with Simulator iOS 18.4 (22E5216h), tested on iPhone 16. https://app.screencast.com/oUq4EMonmfT7u https://app.screencast.com/MCquvHzmZi8QS

The issue of fixed elements with { bottom: 0 } moving up when scrolling still persists. It seems to be a general issue with the IOS 26 release. It affects other browser too. I tested on browsers such as Safari, Chrome, Firefox, Edge and Bravo. With the exception of Edge, all the others display the behavior. Device: iPhone 15 Pro IOS Version: 26.0.1

I'm a web developer of WebRTC based web app for video and audio calls. After updating to iOS 26.1 beta I noticed, that my app can't use microphone anymore. When I'm calling to getUserMedia with audio set to true, Safari returns error "No AVAudioSessionCaptureDevice device". Other WebRTC demo apps also can't access microphone on this firmware. And maybe it's connected somehow, but safari can't detect connected AirPods Pro 2 as an input device. So, this bug brakes any WebRTC app, that uses microphones.

We’re currently working on an OTT-based application where we integrate Google Ad Manager to serve video ads. As part of the ad experience, users often see a “Learn More” CTA (Call to Action) on these ads. As per our current requirement, when a user taps “Learn More” on an ad: • The link should open in Safari (i.e., an external browser) on iOS devices • The Safari browser should ideally open in portrait orientation, as the ad content and layout are optimised for portrait mode However, based on our understanding and technical constraints on iOS, it appears that: • Orientation control is restricted to the app’s own context. • Once Safari is launched via UIApplication.shared.open, we no longer have control over how it behaves in terms of orientation. • iOS system behaviour determines Safari’s orientation based on the device’s physical orientation and Safari’s own internal configuration. Could you please confirm if there’s any supported way (via SDK, deep link config, or otherwise) to enforce portrait orientation in Safari when opening such external URLs from within an iOS app? If this is not technically feasible, we would appreciate any best practices or alternatives you can suggest for ensuring a consistent user experience.

Device: iPhone 15pro, ios26.0 (23A 341) IOS version: 26.0 (23A 341) When using position: sticky; bottom: 0, the div is expected to stick to the bottom of the viewport when the browser toolbar hides while scrolling. However, it stops at the height where the toolbar was, instead of moving down with the disappearing toolbar. In the image below, the red-bordered navigation shows the situation where it does not stick to the bottom. i

When CHIPS was introduced in 18.4 it worked well, however on 18.5 it does not appear to work. There do not appear to be release notes about this in 18.5, so can someone provide definitive if this is a defect that will be fixed, or have they already been deprecated?

Hey Guys My PWA video playback and even youtube videos stopped working after updating iOS to 26.0.1. The video thumnails appear fine and if i try to play the video, it remains stuck. If i restart the phone, the video plays for a second in the PWA and then stops again and entire app gets stuck. Request apple team to fix this issue at the earliest. This is hampering all my iOS users who install the PWA on their device homescreen and use it as app. FYI strangely EVERYTHING WORKS FINE ON iOS SAFARI browser including videos playback If i open it as a web app. so this seems like a specific PWA issue on latest ios 26.0.1