PLATFORM AND VERSION iOS Development environment: Xcode 26.2, macOS x Run-time configuration: iOS The issue does not seem to be limited to a specific version. DESCRIPTION OF PROBLEM We are reaching out to request in-depth technical assistance regarding an intermittent issue with Sign in with Apple implementation in our application. [Technical Status] We have confirmed that our technical implementation is correct. All necessary code and Xcode Capabilities are properly configured, and the service is working perfectly for the vast majority of our users. However, a small subset of users is consistently encountering "Unknown" Error (Error Code 1000), which prevents them from logging in entirely. [Identified Scenario] Currently, the only reproducible case we have found involves Child Accounts (protected accounts) under Family Sharing, specifically when the user's age is set below the regional requirement for a standalone Apple ID. However, we are receiving reports from other users who do not seem to fall into this category. [Requests for Clarification] To resolve this issue and support our users, we would like to obtain clear answers to the following questions: Root Cause: Why does Error 1000 occur specifically for a small number of users while the service works for most others? Other Scenarios: Are there any known cases or conditions other than the "Child Account" age restriction that trigger this specific error? Account-side Issues: If our code and configurations are verified to be correct, should we conclude that this is an issue specific to the individual's Apple ID/Account status? If so, could you provide a troubleshooting guide or official recommendation that we can share with these users to help them resolve their account-related issues? We are committed to providing a seamless authentication experience and would appreciate your expert insight into these edge cases. Thank you for your support. - (void) quickLogin:(uint)requestId withNonce:(NSString *)nonce andState:(NSString *)state { #if AUTHENTICATION_SERVICES_AVAILABLE if (@available(iOS 13.0, tvOS 13.0, macOS 10.15, *)) { ASAuthorizationAppleIDRequest *appleIDRequest = [[self appleIdProvider] createRequest]; [appleIDRequest setNonce:nonce]; [appleIDRequest setState:state]; ASAuthorizationPasswordRequest *keychainRequest = [[self passwordProvider] createRequest]; ASAuthorizationController *authorizationController = [[ASAuthorizationController alloc] initWithAuthorizationRequests:@[appleIDRequest, keychainRequest]]; [self performAuthorizationRequestsForController:authorizationController withRequestId:requestId]; } else { [self sendsLoginResponseInternalErrorWithCode:-100 andMessage:@"Native AppleAuth is only available from iOS 13.0" forRequestWithId:requestId]; } #else [self sendsLoginResponseInternalErrorWithCode:-100 andMessage:@"Native AppleAuth is only available from iOS 13.0" forRequestWithId:requestId]; #endif } - (void) loginWithAppleId:(uint)requestId withOptions:(AppleAuthManagerLoginOptions)options nonce:(NSString *)nonce andState:(NSString *)state { #if AUTHENTICATION_SERVICES_AVAILABLE if (@available(iOS 13.0, tvOS 13.0, macOS 10.15, *)) { ASAuthorizationAppleIDRequest *request = [[self appleIdProvider] createRequest]; NSMutableArray *scopes = [NSMutableArray array]; if (options & AppleAuthManagerIncludeName) [scopes addObject:ASAuthorizationScopeFullName]; if (options & AppleAuthManagerIncludeEmail) [scopes addObject:ASAuthorizationScopeEmail]; [request setRequestedScopes:[scopes copy]]; [request setNonce:nonce]; [request setState:state]; ASAuthorizationController *authorizationController = [[ASAuthorizationController alloc] initWithAuthorizationRequests:@[request]]; [self performAuthorizationRequestsForController:authorizationController withRequestId:requestId]; } else { [self sendsLoginResponseInternalErrorWithCode:-100 andMessage:@"Native AppleAuth is only available from iOS 13.0" forRequestWithId:requestId]; } #else [self sendsLoginResponseInternalErrorWithCode:-100 andMessage:@"Native AppleAuth is only available from iOS 13.0" forRequestWithId:requestId]; #endif } - (void) getCredentialStateForUser:(NSString *)userId withRequestId:(uint)requestId { #if AUTHENTICATION_SERVICES_AVAILABLE if (@available(iOS 13.0, tvOS 13.0, macOS 10.15, *)) { [[self appleIdProvider] getCredentialStateForUserID:userId completion:^(ASAuthorizationAppleIDProviderCredentialState credentialState, NSError * _Nullable error) { NSNumber *credentialStateNumber = nil; NSDictionary *errorDictionary = nil; if (error) errorDictionary = [AppleAuthSerializer dictionaryForNSError:error]; else credentialStateNumber = @(credentialState); NSDictionary *responseDictionary = [AppleAuthSerializer credentialResponseDictionaryForCredentialState:credentialStateNumber errorDictionary:errorDictionary]; [self sendNativeMessageForDictionary:responseDictionary forRequestId:requestId]; }]; } else { [self sendsCredentialStatusInternalErrorWithCode:-100 andMessage:@"Native AppleAuth is only available from iOS 13.0" forRequestWithId:requestId]; } #else [self sendsCredentialStatusInternalErrorWithCode:-100 andMessage:@"Native AppleAuth is only available from iOS 13.0" forRequestWithId:requestId]; #endif }

In iOS 18, i use CNContactPickerViewController to access to Contacts (i know it is one-time access). After first pick up one contact, the Setting > Apps > my app > Contacts shows Private Access without any option to close it. Is there any way to close it and undisplay it ? I tried to uninstall and reinstall my app, but it didn't work.

I regularly help developers with keychain problems, both here on DevForums and for my Day Job™ in DTS. Many of these problems are caused by a fundamental misunderstanding of how the keychain works. This post is my attempt to explain that. I wrote it primarily so that Future Quinn™ can direct folks here rather than explain everything from scratch (-: If you have questions or comments about any of this, put them in a new thread and apply the Security tag so that I see it. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" SecItem: Fundamentals or How I Learned to Stop Worrying and Love the SecItem API The SecItem API seems very simple. After all, it only has four function calls, how hard can it be? In reality, things are not that easy. Various factors contribute to making this API much trickier than it might seem at first glance. This post explains the fundamental underpinnings of the keychain. For information about specific issues, see its companion post, SecItem: Pitfalls and Best Practices. Keychain Documentation Your basic starting point should be Keychain Items. If your code runs on the Mac, also read TN3137 On Mac keychain APIs and implementations. Read the doc comments in <Security/SecItem.h>. In many cases those doc comments contain critical tidbits. When you read keychain documentation [1] and doc comments, keep in mind that statements specific to iOS typically apply to iPadOS, tvOS, and watchOS as well (r. 102786959). Also, they typically apply to macOS when you target the data protection keychain. Conversely, statements specific to macOS may not apply when you target the data protection keychain. [1] Except TN3137, which is very clear about this (-: Caveat Mac Developer macOS supports two different keychain implementations: the original file-based keychain and the iOS-style data protection keychain. IMPORTANT If you’re able to use the data protection keychain, do so. It’ll make your life easier. See the Careful With that Shim, Mac Developer section of SecItem: Pitfalls and Best Practices for more about this. TN3137 On Mac keychain APIs and implementations explains this distinction. It also says: The file-based keychain is on the road to deprecation. This is talking about the implementation, not any specific API. The SecItem API can’t be deprecated because it works with both the data protection keychain and the file-based keychain. However, Apple has deprecated many APIs that are specific to the file-based keychain, for example, SecKeychainCreate. TN3137 also notes that some programs, like launchd daemons, can’t use the file-based keychain. If you’re working on such a program then you don’t have to worry about the deprecation of these file-based keychain APIs. You’re already stuck with the file-based keychain implementation, so using a deprecated file-based keychain API doesn’t make things worse. The Four Freedoms^H^H^H^H^H^H^H^H Functions The SecItem API contains just four functions: SecItemAdd(_:_:) SecItemCopyMatching(_:_:) SecItemUpdate(_:_:) SecItemDelete(_:) These directly map to standard SQL database operations: SecItemAdd(_:_:) maps to INSERT. SecItemCopyMatching(_:_:) maps to SELECT. SecItemUpdate(_:_:) maps to UPDATE. SecItemDelete(_:) maps to DELETE. You can think of each keychain item class (generic password, certificate, and so on) as a separate SQL table within the database. The rows of that table are the individual keychain items for that class and the columns are the attributes of those items. Note Except for the digital identity class, kSecClassIdentity, where the values are split across the certificate and key tables. See Digital Identities Aren’t Real in SecItem: Pitfalls and Best Practices. This is not an accident. The data protection keychain is actually implemented as an SQLite database. If you’re curious about its structure, examine it on the Mac by pointing your favourite SQLite inspection tool — for example, the sqlite3 command-line tool — at the keychain database in ~/Library/Keychains/UUU/keychain-2.db, where UUU is a UUID. WARNING Do not depend on the location and structure of this file. These have changed in the past and are likely to change again in the future. If you embed knowledge of them into a shipping product, it’s likely that your product will have binary compatibility problems at some point in the future. The only reason I’m mentioning them here is because I find it helpful to poke around in the file to get a better understanding of how the API works. For information about which attributes are supported by each keychain item class — that is, what columns are in each table — see the Note box at the top of Item Attribute Keys and Values. Alternatively, look at the Attribute Key Constants doc comment in <Security/SecItem.h>. Uniqueness A critical part of the keychain model is uniqueness. How does the keychain determine if item A is the same as item B? It turns out that this is class dependent. For each keychain item class there is a set of attributes that form the uniqueness constraint for items of that class. That is, if you try to add item A where all of its attributes are the same as item B, the add fails with errSecDuplicateItem. For more information, see the errSecDuplicateItem page. It has lists of attributes that make up this uniqueness constraint, one for each class. These uniqueness constraints are a major source of confusion, as discussed in the Queries and the Uniqueness Constraints section of SecItem: Pitfalls and Best Practices. Parameter Blocks Understanding The SecItem API is a classic ‘parameter block’ API. All of its inputs are dictionaries, and you have to know which properties to set in each dictionary to achieve your desired result. Likewise for when you read properties in output dictionaries. There are five different property groups: The item class property, kSecClass, determines the class of item you’re operating on: kSecClassGenericPassword, kSecClassCertificate, and so on. The item attribute properties, like kSecAttrAccessGroup, map directly to keychain item attributes. The search properties, like kSecMatchLimit, control how the system runs a query. The return type properties, like kSecReturnAttributes, determine what values the query returns. The value type properties, like kSecValueRef perform multiple duties, as explained below. There are other properties that perform a variety of specific functions. For example, kSecUseDataProtectionKeychain tells macOS to use the data protection keychain instead of the file-based keychain. These properties are hard to describe in general; for the details, see the documentation for each such property. Inputs Each of the four SecItem functions take dictionary input parameters of the same type, CFDictionary, but these dictionaries are not the same. Different dictionaries support different property groups: The first parameter of SecItemAdd(_:_:) is an add dictionary. It supports all property groups except the search properties. The first parameter of SecItemCopyMatching(_:_:) is a query and return dictionary. It supports all property groups. The first parameter of SecItemUpdate(_:_:) is a pure query dictionary. It supports all property groups except the return type properties. Likewise for the only parameter of SecItemDelete(_:). The second parameter of SecItemUpdate(_:_:) is an update dictionary. It supports the item attribute and value type property groups. Outputs Two of the SecItem functions, SecItemAdd(_:_:) and SecItemCopyMatching(_:_:), return values. These output parameters are of type CFTypeRef because the type of value you get back depends on the return type properties you supply in the input dictionary: If you supply a single return type property, except kSecReturnAttributes, you get back a value appropriate for that return type. If you supply multiple return type properties or kSecReturnAttributes, you get back a dictionary. This supports the item attribute and value type property groups. To get a non-attribute value from this dictionary, use the value type property that corresponds to its return type property. For example, if you set kSecReturnPersistentRef in the input dictionary, use kSecValuePersistentRef to get the persistent reference from the output dictionary. In the single item case, the type of value you get back depends on the return type property and the keychain item class: For kSecReturnData you get back the keychain item’s data. This makes most sense for password items, where the data holds the password. It also works for certificate items, where you get back the DER-encoded certificate. Using this for key items is kinda sketchy. If you want to export a key, called SecKeyCopyExternalRepresentation. Using this for digital identity items is nonsensical. For kSecReturnRef you get back an object reference. This only works for keychain item classes that have an object representation, namely certificates, keys, and digital identities. You get back a SecCertificate, a SecKey, or a SecIdentity, respectively. For kSecReturnPersistentRef you get back a data value that holds the persistent reference. Value Type Subtleties There are three properties in the value type property group: kSecValueData kSecValueRef kSecValuePersistentRef Their semantics vary based on the dictionary type. For kSecValueData: In an add dictionary, this is the value of the item to add. For example, when adding a generic password item (kSecClassGenericPassword), the value of this key is a Data value containing the password. This is not supported in a query dictionary. In an update dictionary, this is the new value for the item. For kSecValueRef: In add and query dictionaries, the system infers the class property and attribute properties from the supplied object. For example, if you supply a certificate object (SecCertificate, created using SecCertificateCreateWithData), the system will infer a kSecClass value of kSecClassCertificate and various attribute values, like kSecAttrSerialNumber, from that certificate object. This is not supported in an update dictionary. For kSecValuePersistentRef: For query dictionaries, this uniquely identifies the item to operate on. This is not supported in add and update dictionaries. Revision History 2025-05-28 Expanded the Caveat Mac Developer section to cover some subtleties associated with the deprecation of the file-based keychain. 2023-09-12 Fixed various bugs in the revision history. Added a paragraph explaining how to determine which attributes are supported by each keychain item class. 2023-02-22 Made minor editorial changes. 2023-01-28 First posted.

Our product includes a background sync process that synchronizes credentials between devices. We need to update ASCredentialIdentityStore when credentials are changed, we have noticed that the ASCredentialIdentityStore.shared.saveCredentialIdentities() fails to run when the device is locked. Is it possible to update ASCredentialIdentityStore when the device is locked?

% curl -v https://app-site-association.cdn-apple.com/a/v1/zfcs.bankts.cn Host app-site-association.cdn-apple.com:443 was resolved. IPv6: (none) IPv4: 218.92.226.151, 119.101.148.193, 218.92.226.6, 115.152.217.3 Trying 218.92.226.151:443... Connected to app-site-association.cdn-apple.com (218.92.226.151) port 443 ALPN: curl offers h2,http/1.1 (304) (OUT), TLS handshake, Client hello (1): CAfile: /etc/ssl/cert.pem CApath: none (304) (IN), TLS handshake, Server hello (2): (304) (IN), TLS handshake, Unknown (8): (304) (IN), TLS handshake, Certificate (11): (304) (IN), TLS handshake, CERT verify (15): (304) (IN), TLS handshake, Finished (20): (304) (OUT), TLS handshake, Finished (20): SSL connection using TLSv1.3 / AEAD-AES256-GCM-SHA384 / [blank] / UNDEF ALPN: server accepted http/1.1 Server certificate: subject: C=US; ST=California; O=Apple Inc.; CN=app-site-association.cdn-apple.com start date: Sep 25 13:58:08 2025 GMT expire date: Mar 31 17:44:25 2026 GMT subjectAltName: host "app-site-association.cdn-apple.com" matched cert's "app-site-association.cdn-apple.com" issuer: CN=Apple Public Server RSA CA 11 - G1; O=Apple Inc.; ST=California; C=US SSL certificate verify ok. using HTTP/1.x GET /a/v1/zfcs.bankts.cn HTTP/1.1 Host: app-site-association.cdn-apple.com User-Agent: curl/8.7.1 Accept: / Request completely sent off < HTTP/1.1 404 Not Found < Content-Type: text/plain; charset=utf-8 < Content-Length: 10 < Connection: keep-alive < Server: nginx < Date: Wed, 04 Feb 2026 02:26:00 GMT < Expires: Wed, 04 Feb 2026 02:26:10 GMT < Age: 24 < Apple-Failure-Details: {"cause":"context deadline exceeded (Client.Timeout exceeded while awaiting headers)"} < Apple-Failure-Reason: SWCERR00301 Timeout < Apple-From: https://zfcs.bankts.cn/.well-known/apple-app-site-association < Apple-Try-Direct: true < Vary: Accept-Encoding < Via: https/1.1 jptyo12-3p-pst-003.ts.apple.com (acdn/3.16363), http/1.1 jptyo12-3p-pac-043.ts.apple.com (acdn/3.16363), https/1.1 jptyo12-3p-pfe-002.ts.apple.com (acdn/3.16363) < X-Cache: MISS KS-CLOUD < CDNUUID: 736dc646-57fb-43c9-aa0d-eedad3a534f8-1154605242 < x-link-via: yancmp83:443;xmmp02:443;fzct321:443; < x-b2f-cs-cache: no-cache < X-Cache-Status: MISS from KS-CLOUD-FZ-CT-321-35 < X-Cache-Status: MISS from KS-CLOUD-XM-MP-02-16 < X-Cache-Status: MISS from KS-CLOUD-YANC-MP-83-15 < X-KSC-Request-ID: c4a640c815640ee93c263a357ee919d6 < CDN-Server: KSFTF < X-Cdn-Request-ID: c4a640c815640ee93c263a357ee919d6 < Not Found Connection #0 to host app-site-association.cdn-apple.com left intact

We have been having very high response times in device check device validation service (https://developer.apple.com/documentation/devicecheck/accessing-and-modifying-per-device-data#Create-the-payload-for-a-device-validation-request) since 17 July at 19:10hs GMT. The service information page says the service was running in green status but that isn't the case and we currenly have stop consuming it. Is it being looked at? Are you aware of this issue? Can you give us an estimate of when it should be working correctly?

Hi everyone, I'm working on an app that stores multiple secrets in the Keychain, each protected with .userPresence. My goal is to authenticate the user once via FaceID/TouchID and then read multiple Keychain items without triggering subsequent prompts. I am reusing the same LAContext instance for these operations, and I have set: context.touchIDAuthenticationAllowableReuseDuration = LATouchIDAuthenticationMaximumAllowableReuseDuration However, I'm observing that every single SecItemCopyMatching call triggers a new FaceID/TouchID prompt, even if they happen within seconds of each other using the exact same context. Here is a simplified flow of what I'm doing: Create a LAContext. Set touchIDAuthenticationAllowableReuseDuration to max. Perform a query (SecItemCopyMatching) for Item A, passing [kSecUseAuthenticationContext: context]. Result: System prompts for FaceID. Success. Immediately perform a query (SecItemCopyMatching) for Item B, passing the same [kSecUseAuthenticationContext: context]. Result: System prompts for FaceID again. My question is: Does the .userPresence access control flag inherently force a new user interaction for every Keychain access, regardless of the LAContext reuse duration? Is allowableReuseDuration only applicable for LAContext.evaluatePolicy calls and not for SecItem queries? If so, is there a recommended pattern for "unlocking" a group of Keychain items with a single biometric prompt? Environment: iOS 17+, Swift. Thanks!

General: Forums subtopic: Privacy & Security > General Forums tag: App Sandbox App Sandbox documentation App Sandbox Design Guide documentation — This is no longer available from Apple. There’s still some info in there that isn’t covered by the current docs but, with the latest updates, it’s pretty minimal (r. 110052019). Still, if you’re curious, you can consult an old copy [1]. App Sandbox Temporary Exception Entitlements archived documentation — To better understand the role of temporary exception entitlements, see this post. Embedding a command-line tool in a sandboxed app documentation Discovering and diagnosing App Sandbox violations (replaces the Viewing Sandbox Violation Reports forums post) Resolving App Sandbox Inheritance Problems forums post The Case for Sandboxing a Directly Distributed App forums post Implementing Script Attachment in a Sandboxed App forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] For example, this one archived by the Wayback Machine.

Hi, I followed step by step documentation to implement SignIn with Apple in iOS/Android application. I created an AppId com.nhp.queenergy, a related ServiceId com.nhp.queenergy.apple, and a KeyId. Authorization request is correctly performed by using ServiceId as client_id and my backend redirect_uri I receive code on my backend Token request is performed by using ServiceId as client_id, same redirect_uri, the code I have just received and the client_secret as JWT signed with my .p8 certificate with the following decoded structure Header { "kid": , "typ": "JWT", "alg": "ES256" } Payload { "iss": , "sub": "com.nhp.queenergy.apple", "aud": "https://appleid.apple.com", "exp": 1756113744, "iat": 1756111944 } I always receive "invalid_grant" error without any further error description. Moreover the error is always the same even though I use any fake string as client secret. If the code expires, as expected the error changes by adding "The code has expired or has been revoked." I really don't know how to solve this issue Best regards

Hi, is it legal to use open APIs to get the users's country country code using the Ip address in the app? I mean I want to know the user country for the game leaderboards data, and there are sites say this is free and open. So, I have two questions, first, is this making the user calling open api to get its country code concept legal? second question, what if these sites suddenly decided that it is not legal to use their apis for commercial use, and i miss that announcement; will you remove my app from the store? or what action will you take exactly?

Hi, I’ve added attestation to my app, and everything worked as expected during setup. However, after deployment, I noticed some unknownSystemFailure entries in the production logs on New Relic. Could you help me understand what typically causes this error? The documentation suggests issues such as failing to generate a token. What scenarios could lead to that?

Hi, we are having Sign in with Apple issues. For a large % of new users on our app which select this option, the first name and last name values are not being passed to us. This is the case in both scenarios - where the user shares their email address or hides it, and happens on iPhone when the user selects the default iCloud account. We're unclear why this is occurring.

Hello, When using ASWebAuthenticationSession with an HTTPS callback URL (Universal Link), I receive the following error: Authorization error: The operation couldn't be completed. Application with identifier jp.xxxx.yyyy.dev is not associated with domain xxxx-example.go.link. Using HTTPS callbacks requires Associated Domains using the webcredentials service type for xxxx-example.go.link. I checked Apple’s official documentation but couldn’t find any clear statement that webcredentials is required when using HTTPS callbacks in ASWebAuthenticationSession. What I’d like to confirm: Is webcredentials officially required when using HTTPS as a callback URL with ASWebAuthenticationSession? If so, is there any official documentation or technical note that states this requirement? Environment iOS 18.6.2 Xcode 16.4 Any clarification or official references would be greatly appreciated. Thank you.

I no longer have an app on the store. I do have an apple books account on the same login but there's no need for me to have the appstore connect account or whatever you call it and keep getting notifications when I don't have an app, don't want an app, will never do another app.

Hi, I am developing a Platform SSO in order to have integrated with our IdP, which I am also adapting to provide the right endpoints for Platform SSO. I have a few questions about the implementation: does the client-request-id need to be present on all requests? Is it unique per request, or requests that are bound together like those requesting a nonce and those who will use that nonce should use the same client-request-id? I am not sure how the loginManager.presentRegistrationViewController works. I'd like to get the user to authenticate to my IdP before device registration. So I am not sure if I should provide my own Webview or something similar or if this method should do something for me; My idea is to request user authentication once, save the state when performing device registration, so that I avoid asking for user authentication twice when performing user registration. Is this the right way to do it? How does platform SSO handles tokens? If one application of my IdP requests the authentication on a common OIDC/OAuth2 flow, should I perform some sort of token exchange? How about SAML? Platform SSO seems to be token-centric, but how does one handle SAML flows? Is it by using WebView as well?

I added a feature to my app that retrieves only app settings (no personal data) from my API hosted on Cloudflare Workers. The app does not send, collect, track, or share any user data, and I do not store or process any personal information. Technical details such as IP address, user agent, and device information may be automatically transmitted as part of the internet protocol when the request is made, but my app does not log or use them. Cloudflare may collect this information. Question: Does this count as “data collection” for App Store Connect purposes, or can I select “No Data Collected”?

I'm implementing Apple Sign-In in my Next.js application with a NestJS backend. After the user authenticates with Apple, instead of redirecting to my configured callback URL, the browser makes a POST request to a mysterious endpoint /appleauth/auth/federate that doesn't exist in my codebase, resulting in a 404 error. Tech Stack Frontend: Next.js 16.0.10, React 19.2.0 Backend: NestJS with Passport (using @arendajaelu/nestjs-passport-apple) Frontend URL: https://myapp.example.com Backend URL: https://api.example.com Apple Developer Configuration Service ID: (configured correctly in Apple Developer Console) Return URL (only one configured): https://api.example.com/api/v1/auth/apple/callback Domains verified in Apple Developer Console: myapp.example.com api.example.com example.com Backend Configuration NestJS Controller (auth.controller.ts): typescript @Public() @Get('apple') @UseGuards(AuthGuard('apple')) async appleAuth() { // Initiates Apple OAuth flow } @Public() @Post('apple/callback') // Changed from @Get to @Post for form_post @UseGuards(AuthGuard('apple')) async appleAuthCallback(@Req() req: any, @Res() res: any) { const result = await this.authService.socialLogin(req.user, ipAddress, userAgent); // Returns HTML with tokens that uses postMessage to send to opener window } Environment Variables: typescript APPLE_CLIENT_ID=<service_id> APPLE_TEAM_ID=<team_id> APPLE_KEY_ID=<key_id> APPLE_PRIVATE_KEY_PATH=./certs/AuthKey_XXX.p8 APPLE_CALLBACK_URL=https://api.example.com/api/v1/auth/apple/callback FRONTEND_URL=https://myapp.example.com The passport-apple strategy uses response_mode: 'form_post', so Apple POSTs the authorization response to the callback URL. Frontend Implementation Next.js API Route (/src/app/api/auth/apple/route.js): javascript export async function GET(request) { const backendUrl = new URL(`${API_URL}/auth/apple`); const response = await fetch(backendUrl.toString(), { method: "GET", headers: { "Content-Type": "application/json", }, }); const responseText = await response.text(); return new NextResponse(responseText, { status: response.status, headers: { "Content-Type": contentType || "text/html" }, }); } Frontend Auth Handler: javascript export const handleAppleLogin = (router, setApiError) => { const frontendUrl = window?.location?.origin; // Opens popup to /api/auth/apple window.open( `${frontendUrl}/api/auth/apple`, "appleLogin", "width=500,height=600" ); }; The Problem Expected Flow: User clicks "Login with Apple" Frontend opens popup → https://myapp.example.com/api/auth/apple Frontend proxies to → https://api.example.com/api/v1/auth/apple Backend redirects to Apple's authentication page User authenticates with Apple ID Apple POSTs back to → https://api.example.com/api/v1/auth/apple/callback Backend processes and returns success HTML Actual Behavior: After step 5 (user authentication with Apple), instead of Apple redirecting to my callback URL, the browser makes this unexpected request: POST https://myapp.example.com/appleauth/auth/federate?isRememberMeEnabled=false Status: 404 Not Found Request Payload: json { "accountName": "user@example.com", "rememberMe": false } Network Tab Analysis From Chrome DevTools, the call stack shows: send @ app.js:234 ajax @ app.js:234 (anonymous) @ app.js:10 Ee.isFederated @ app.js:666 _callAuthFederate @ app.js:666 The Ee.isFederated and _callAuthFederate functions appear to be minified library code, but I cannot identify which library. What I've Verified ✅ The /appleauth/auth/federate endpoint does not exist anywhere in my codebase: bash grep -r "appleauth" src/ # No results grep -r "federate" src/ # No results ✅ Apple Developer Console shows only ONE Return URL configured (verified multiple times) ✅ Changed callback route from @Get to @Post to handle form_post response mode ✅ Rebuilt frontend completely multiple times: bash rm -rf .next npm run build ✅ Tested in: Incognito/Private browsing mode Different browsers (Chrome, Firefox, Safari) Different devices After clearing all cache and cookies ✅ No service workers registered in the application ✅ No external <script> tags or CDN libraries loaded ✅ package.json contains no AWS Amplify, Auth0, Cognito, or similar federated auth libraries ✅ Checked layout.js and all root-level files - no external scripts Additional Context Google Sign-In works perfectly fine using the same approach The mysterious endpoint uses a different path structure (/appleauth/ vs /api/auth/) The call appears to originate from client-side JavaScript (based on the call stack) The app.js file with the mysterious functions is the built Next.js bundle Questions Where could this /appleauth/auth/federate endpoint be coming from? Why is the browser making this POST request instead of following Apple's redirect to my configured callback URL? Could this be related to the response_mode: 'form_post' in the Apple Passport strategy? Is there something in the Apple Developer Primary App ID configuration that could trigger this behavior? Could this be a Next.js build artifact or some hidden dependency? The mysterious call stack references (Ee.isFederated, _callAuthFederate) suggest some library is intercepting the Apple authentication flow, but I cannot identify what library or where it's being loaded from. The minified function names suggest federated authentication, but I have no such libraries in my dependencies. Has anyone encountered similar issues with Apple Sign-In where an unexpected endpoint is being called?

I have implemented "Sign in With Apple" in my app , but problem is when user logged in initially or first time and email I can retrieve , name and email but after that when i tried to re login it is giving null value for name and email, why it is happening and what should be done here?

I have an Autofill Passkey Provider working for Safari and Chrome via WebAuthn protocol. Unfortunately, Chrome will not offer my extension as a logon credential provider unless I add the credential to the ASCredentialIdentityStore. I wonder what is the best way to access the ASCredentialIdentityStore from an AutoFill extension? I understand I cannot access it directly from the extension context, so what is the best way to trigger my container app to run, based on a new WebAuthn registration? The best I can think of so far is for the www site to provide an App Link to launch my container app as part of the registration ceremony. Safari will offer my extension even without adding it to the ASCredentialIdentityStore, so I guess I should file a request with Chrome to work this way too, given difficulty of syncing ASCredentialIdentityStore with WebAuthn registration.

I was experiencing a weird sign in error when using apple sign in with my app and wanted to put it here for anyone else who might experience it in the future, and so apple can make this requirement more clear. I was using CloudKit and apple sign in. If you are not using both this probably does not apply to you. Every time I would go to sign in in the iOS simulator I would enter my password, hit "sign in", and everything just froze. The very odd reason for this is if you are using iCloudKit and apple sign in you need to go to specifically the "identifiers" in the "Certificates, Identifiers & Profiles" menu (https://developer.apple.com/account/resources/identifiers/list). And from there you specifically need an App ID Configuration with apple sign in enabled. From there you have to have the same exact bundle identifier in Xcode under project settings(not an upper tab just click your project in the left panel). And that should allow you to both pass validation and have your sign in work. Hope this helps!