Hello, I have encountered several challenges related to System Integrity Protection (SIP) state detection and code signing requirements. I would like to seek clarification and guidance on the proper approach to programmatically determine the SIP state. Here are the issues I’ve encountered: XPC Code Signing Check APIs: APIs like setCodeSigningRequirement and setConnectionCodeSigningRequirement do not work when SIP disabled and that's ok given what SIP is. LaunchCodeRequirement API: When using Process.launchRequirement, the LaunchCodeRequirement API does not function anymore when SIP disabled. The IsSIPProtected requirement behaves in a way that is not clearly documented -- it appears to only apply to pre-installed Apple apps. Legacy APIs: Older APIs like SecCodeCheckValidity are likely to be non-functional, though I haven’t had the chance to validate this yet. Private API Concerns: So to mitigate those limitations I prefer my app to not even try to connect to untrusted XPC or launch untrusted Processes when SIP is disabled. The only way to determine SIP state I could find is a low-level C function csr_get_active_config. However, this function is not declared in any publicly available header file, indicating that it is a private API. Since private APIs cannot be used in App Store-distributed apps and are best avoided for Developer ID-signed apps, this does not seem like a viable solution. Given these limitations, what is the recommended and proper approach to programmatically determine the SIP state in a macOS application? Any insights or guidance would be greatly appreciated. Thank you!

I am new to swift development, and it's possible that I'm missing something fundamental/obvious. If so, I apologize in advance. My team is developing an application for iPadOS using SwiftUI, and I'm trying to accomplish something similar to what the original inquirer is asking for in this thread: https://developer.apple.com/forums/thread/725152. The only difference is that I'm trying to use a PIV smart card to achieve authentication to a server rather than digitally sign a document. Unfortunately, I'm getting stuck when attempting to run the list() function provided in the accepted answer to the post mentioned above. When attempting to call SecItemCopyMatching(), I'm getting a -34018 missing entitlement error. I've attempted to add the com.apple.token to my app's keychain-access-groups entitlements, but this does not resolve the issue. I have checked the entitlements in my built app, per the recommendation in the troubleshooting guide here: https://developer.apple.com/forums/thread/114456. The entitlement for com.apple.token is indeed present in the plist. Based on other documentation I've read, however, it seems that the explicit declaration of com.apple.token should not even be required in the entitlements. Is there something obvious that I'm missing here that would prevent my app from accessing the token access group?

I’d like to confirm something regarding the hosting of the apple-app-site-association (AASA) file. We have a server that publicly hosts the AASA file and is accessible globally. However, this server sits behind an additional security layer (a security server/reverse proxy). My question is: Will this security layer affect Apple’s ability to access and validate the AASA file for Universal Links or App Clips? Are there specific requirements (e.g. headers, redirects, TLS versions, etc.) that we need to ensure the security server does not block or modify? Any guidance or best practices would be appreciated. Thanks!

Our desktop app for macos will be released in 2 channels appstore dmg package on our official website for users to download and install Now when we debug with passkey, we find that the package name of the appstore can normally arouse passkey, but the package name of the non-App Store can not arouse the passkey interface I need your help. Thank you

For security reasons, my application needs to prohibit external devices. If it is determined that the current phone is connected to any external devices, including non MFI authenticated devices, the app will exit. Please tell me how to do it? Thanks for your help.

Hi all, I'm using a CryptoTokenKit (CTK) extension to perform code signing without having the private key stored on my laptop. The extension currently only supports the rsaSignatureDigestPKCS1v15SHA256 algorithm: func tokenSession(_ session: TKTokenSession, supports operation: TKTokenOperation, keyObjectID: TKToken.ObjectID, algorithm: TKTokenKeyAlgorithm) -> Bool { return algorithm.isAlgorithm(SecKeyAlgorithm.rsaSignatureDigestPKCS1v15SHA256) } This setup works perfectly with codesign, and signing completes without any issues. However, when I try to use productsign, the system correctly detects and delegates signing to my CTK extension, but it seems to always request rsaSignatureDigestPKCS1v15SHA1 instead: productsign --timestamp --sign <identity> unsigned.pkg signed.pkg productsign: using timestamp authority for signature productsign: signing product with identity "Developer ID Installer: <org> (<team>)" from keychain (null) ... Error Domain=NSOSStatusErrorDomain Code=-50 "algid:sign:RSA:digest-PKCS1v15:SHA1: algorithm not supported by the key" ... productsign: error: Failed to sign the product. From what I understand, older versions of macOS used SHA1 for code signing, but codesign has since moved to SHA256 (at least when legacy compatibility isn't a concern). Oddly, productsign still seems to default to SHA1, even in 2025. Is there a known way to force productsign to use SHA256 instead of SHA1 for the signature digest algorithm? Or is there some flag or configuration I'm missing? Thanks in advance!

Can you please give me a hand with importing certificates under MacOS? I want to connect to Wi-Fi with 802.1X authentication (EAP-TLS) using a certificate that my homebrew application imported into my data protection keychain, but the imported certificate does not show up and I cannot select the certificate. It also does not show up in the Keychain Access app. One method I have tried is to import it into the data protection keychain by using the SecItemAdd function and setting kSecUseDataProtectionKeychain to true, but it does not work. Is there a better way to do this? ID: for id in identities { let identityParams: [String: Any] = [ kSecValueRef as String: id, kSecReturnPersistentRef as String: true, kSecUseDataProtectionKeychain as String: true ] let addIdentityStatus = SecItemAdd(identityParams as CFDictionary, nil) if addIdentityStatus == errSecSuccess { print("Successfully added the ID.: \(addIdentityStatus)") } else { print("Failed to add the ID.: \(addIdentityStatus)") } } Certificate: for cert in certificates { let certParams: [String: Any] = [ kSecValueRef as String: cert, kSecReturnPersistentRef as String: true, kSecUseDataProtectionKeychain as String: true ] let addCertStatus = SecItemAdd(certParams as CFDictionary, nil) if addCertStatus == errSecSuccess { print("Successfully added the certificate.: (\(addCertStatus))") } else { print("Failed to add the certificate.: (\(addCertStatus))") } } Private key: for privateKey in keys { let keyTag = UUID().uuidString.data(using: .utf8)! let keyParams: [String: Any] = [ kSecAttrApplicationTag as String: keyTag, kSecValueRef as String: privateKey, kSecReturnPersistentRef as String: true, kSecUseDataProtectionKeychain as String: true ] let addKeyStatus = SecItemAdd(keyParams as CFDictionary, nil) if addKeyStatus == errSecSuccess { print("Successfully added the private key.: \(addKeyStatus)") } else { print("Failed to add the private key.: \(addKeyStatus)") } }

Hello, I have an application which uses a helper[1] to download[2] files. When files download is a DMG and user mounts the image to run the application from this DMG it doesn't pass Gatekeeper. It presents the "Application XYZ.app can't be opened.". Same file downloaded via Safari shows a different dialog, the "XYZ.app is an app downloaded from the internet. Are you sure you want to open it?" In the system log I see this line: exec of /Volumes/SampleApp/SampleApp.app/Contents/MacOS/SampleApp denied since it was quarantined by Download\x20Helper and created without user consent, qtn-flags was 0x00000187 The application is running sandboxed and hardened, the main application has com.apple.security.files.downloads.read-write entitlement. Everything is signed by DeveloperID and passes all checks[3]. I tried to check the responsible process[4] of the helper. Then trivial stuff like download folder access in System Settings/Privacy & Security/Files & Folders. Everything seems to be fine. For what it worths the value of quarantine attribute is following: com.apple.quarantine: 0087;6723b80e;My App; The Safari downloaded one posses: com.apple.quarantine: 0083;6723b9fa;Safari;02162070-2561-42BE-B30B-19A0E94FE7CA Also tried a few more ways and got to 0081 with Edge and 0082 with a sample app with similar setup. Not sure if that has any meaning. What could I be doing wrong that Gatekeeper right away refuses to run the application from DMG instead of showing the dialog like in other cases? [1] The executable is in application bundle located in Contents/Helpers/DownloadHelper.app in the main application bundle. [2] Nothing fancy, curl + regular POSIX file operations [3] codesign, syspolicy_check, spctl [4] launchctl procinfo pid

I was basically saving items into the Keychain with the following query dictionary: let query: [String: Any] = [ kSecClass as String: kSecClassGenericPassword, kSecAttrAccount as String: key, kSecValueData as String: value, kSecAttrAccessible as String: kSecAttrAccessibleAfterFirstUnlock ] Where key is a String value and value is a Data that used to be a String. I was getting the following error: code: -25299 description: The specified item already exists in the keychain After a lot of digging in I saw that I needed to add kSecAttrService to the dictionary and after that it all started working. The service value is a String value. let query: [String: Any] = [ kSecClass as String: kSecClassGenericPassword, kSecAttrService as String: service, kSecAttrAccount as String: key, kSecValueData as String: value, kSecAttrAccessible as String: kSecAttrAccessibleAfterFirstUnlock ] These were the articles that suggested adding the kSecAttrService parameter: https://stackoverflow.com/a/11672200 https://stackoverflow.com/a/58233542 But in the same code base I found that other developers were saving using a dictionary similar to the one I first provided and it works: var query: [String : Any] = [ kSecClass as String : kSecClassGenericPassword as String, kSecAttrAccount as String : key, kSecValueData as String : data ] I don't know how to explain why my first implementation didn't work even though it was similar to what was already in the code base but the second approach worked well. Regardless of the query dictionary, this is how I'm saving things: static func save(value: Data, key: String, service: String) -> KeyChainOperationStatus { logInfo("Save Value - started, key: \(key), service: \(service)") let query: [String: Any] = [ kSecClass as String: kSecClassGenericPassword, kSecAttrService as String: service, kSecAttrAccount as String: key, kSecValueData as String: value, kSecAttrAccessible as String: kSecAttrAccessibleAfterFirstUnlock ] // Remove any existing key let cleanUpStatus = SecItemDelete(query as CFDictionary) let cleanUpStatusDescription = SecCopyErrorMessageString(cleanUpStatus, nil)?.asString ?? "__cleanup_status_unavailable" logInfo("Save Value - cleanup status: \(cleanUpStatus), description: \(cleanUpStatusDescription)") guard cleanUpStatus == errSecSuccess || cleanUpStatus == errSecItemNotFound else { logError("Save Value - Failed cleaning up KeyChain") return .cleanupFailed(code: cleanUpStatus) } // Add the new key let saveStatus = SecItemAdd(query as CFDictionary, nil) let saveStatusDescription = SecCopyErrorMessageString(saveStatus, nil)?.asString ?? "__save_status_unavailable" logInfo("Save Value - save status [\(saveStatus)] : \(saveStatusDescription)") guard saveStatus == errSecSuccess else { logError("Save Value - Failed saving new value into KeyChain") return .savingFailed(code: saveStatus) } return .successs }

We have a macOS app that has a Photos Extension, which shares documents with the app via an app group container. Historically we used to have an iOS-style group identifier (group.${TeamIdentifier}${groupName}), because we were lead by the web interface in the developer portal to believe this to be the right way to name groups. Later with the first macOS 15 betas last year there was a bug with the operating system warning users, our app would access data from different apps, but it was our own app group container directory. Therefore we added a macOS-style group identifier (${TeamIdentifier}${groupName}) and wrote a migration of documents to the new group container directory. So basically we need to have access to these two app group containers for the foreseeable future. Now with the introduction of iOS-style group identifiers for macOS, Xcode Cloud no longer archives our app for TestFlight or AppStore, because it complains: ITMS-90286: Invalid code signing entitlements - Your application bundle’s signature contains code signing entitlements that aren’t supported on macOS. Specifically, the “[group.${TeamIdentifier}${groupName}, ${TeamIdentifier}${groupName}]” value for the com.apple.security.application-groups key in isn’t supported. This value should be a string or an array of strings, where each string is the “group” value or your Team ID, followed by a dot (“.”), followed by the group name. If you're using the “group” prefix, verify that the provisioning profile used to sign the app contains the com.apple.security.application-groups entitlement and its associated value(s). We have included the iOS-style group identifier in the provisioning profile, generated automatically, but can't do the same for the macOS-style group identifier, because the web interface only accepts identifiers starting with "group". How can we get Xcode Cloud to archive our app again using both group identifiers? Thanks in advance

I requested permission to use the Family Controls entitlement two weeks ago, and I have not received a response or status update. I have been to that page where it says "Thank you! We'll get back to you soon!" so many times.

Hi, I am developing an app that checks if biometric authentication capabilities (Face ID and Touch ID) are available on a device. I have a few questions: Do I need to include a privacy string in my app to use the LAContext's canEvaluatePolicy function? This function checks if biometric authentication is available on the device, but does not actually trigger the authentication. From my testing, it seems like a privacy declaration is only required when using LAContext's evaluatePolicy function, which would trigger the biometric authentication. Can you confirm if this is the expected behavior across all iOS versions and iPhone models? When exactly does the biometric authentication permission pop-up appear for users - is it when calling canEvaluatePolicy or evaluatePolicy? I want to ensure my users have a seamless experience. Please let me know if you have any insights on these questions. I want to make sure I'm handling the biometric authentication functionality correctly in my app. Thank you!

First, I do not publish my application to the AppStore, but I need to customize a sandbox environment. It seems that sandbox-exec cannot configure entitlements, so I have used some other APIs, such as sandbox_compile_entitlements and sandbox_apply_container. When encountering the entitlement "com.apple.security.files.user-selected.read-only", I am unsure how to correctly write sandbox profile to implement this. Can anyone help me?

Hello, I want to access the Docker socket API from inside the macOS App Sandbox. The method queries the API using curl with --unix-socket. However, the Sandbox blocks the request, as shown by the log: curl(22299) deny(1) network-outbound /Users/user/.docker/run/docker.sock Outgoing network traffic is generally allowed, but access to the Docker Unix socket is denied. Here’s the code I’m using: private func executeDockerAPI() -> String { let process = Process() let pipe = Pipe() process.executableURL = URL(fileURLWithPath: "/usr/bin/curl") process.arguments = [ "--unix-socket", "/Users/user/.docker/run/docker.sock", "http://127.0.0.1/containers/json" ] process.standardOutput = pipe process.standardError = pipe do { try process.run() process.waitUntilExit() let data = pipe.fileHandleForReading.readDataToEndOfFile() if let output = String(data: data, encoding: .utf8) { return output } else { return "Error while decoding" } } catch { return "Error running command: \(error.localizedDescription)" } } Is there any entitlement or sandbox configuration I’m missing to allow access to /Users/user/.docker/run/docker.sock from inside the sandbox?

Hi, I have a certificate, how can I display the certificate content in my Mac app just like Keychain Access app does. Can I popup the certificate content dialog just like Keychain Access app?

I am using the CryptoKit SecureEnclave enum to generate Secure Enclave keys. I've got a couple of questions: What is the lifetime of these keys? When I don't store them somewhere, how does the Secure Enclave know they are gone? Do backups impact these keys? I.e. can I lose access to the key when I restore a backup? Do these keys count to the total storage capacity of the Secure Enclave? If I recall correctly, the Secure Enclave has a limited storage capacity. Do the SecureEnclave key instances count towards this storage capacity? What is the dataRepresentation and how can I use this? I'd like to store the Secure Enclave (preferably not in the Keychain due to its limitations). Is it "okay" to store this elsewhere, for instance in a file or in the UserDefaults? Can the dataRepresentation be used in other apps? If I had the capability of extracting the dataRepresentation as an attacker, could I then rebuild that key in my malicious app, as the key can be rebuilt with the Secure Enclave on the same device, or are there measures in place to prevent this (sandbox, bundle id, etc.)

Problem Description: In our App, When we launch the web login part using ASWebAuthentication + Universal Links with callback scheme as "https", we are not receiving callback. Note: We are using "SwiftUIWebAuthentication" Swift Package Manager to display page in ASWebAuth. But when we use custom url scheme instead of Universal link, app able to receive call back every time. We use ".onOpenURL" to receive universal link callback scheme.

In some crashlog files, there are additional pieces of information related to codesigning. I can understand what most of themcorresponds to (ID, TeamID, Flags, Validation Category). But there is one I have some doubt about: Trust Level. As far as I can tell (or at least what Google and other search engines say), this is an unsigned 32 bit integer that defines the trust level with -1 being untrusted, 0, being basically an Apple executable and other potential bigger values corresponding to App Store binaries, Developer ID signature, etc. Yet, I'm not able to find a corresponding detailed documentation about this on Apple's developer website. I also had a look at the LightweightCodeRequirements "include" file and there does not seem to be such a field available. [Q] Is there any official documentation listing the different values for this trust level value and providing a clear description of what it corresponds to?

Hi, I’d like to confirm something regarding the hosting of the apple-app-site-association (AASA) file. We have a server that publicly hosts the AASA file and is accessible globally. However, this server sits behind an additional security layer (a security server/reverse proxy). My question is: Will this security layer affect Apple’s ability to access and validate the AASA file for Universal Links or App Clips? Are there specific requirements (e.g. headers, redirects, TLS versions, etc.) that we need to ensure the security server does not block or modify? Any guidance or best practices would be appreciated.

Hi,is there an option to mark the file or folder or item stored in user defaults ... not to be backed up when doing unencrypted backup in iTunes?We are developing iOS app that contains sensitive data. But even if we enable Data Protection for the iOS app it can be backed up on mac unencrypted using iTunes. Is there a way to allow backing up content only if the backup is encrypted?