Hello everyone, I’ve reached out to Apple’s review team multiple times, but unfortunately, I haven’t received any clear or specific guidance on why my app was rejected. My app has been rejected several times with the reason “Spam” under guideline 4.3, and I still don't understand exactly which part of the app is problematic. Even after providing the necessary information about the data, I resubmitted the app, and after a few days, it quickly moved into "In Review" status, but then was rejected within seconds with the same “Spam” message. I have sent over 13 messages asking for specific feedback, and all I get are vague responses saying “It’s spam, refer to 4.3, fix your app, and resubmit.” However, when I review the guidelines, I don’t see any specific reasons for rejection that apply to my app. I’m particularly confused because my app is a VPN, and when I check the guidelines, I see that apps in categories like dating and others are saturated, but VPN apps are not. My app uses completely dedicated servers, and the IP addresses are not found in any other apps. Still, my app keeps getting rejected. If anyone has encountered a similar issue or has any insight into what might be causing this, I would greatly appreciate it if you could provide detailed guidance on what specifically needs to be changed to get the app approved. Thank you!

Hi, I'm getting started with designing and coding a watchOS app. I wanted to use Sketch to plan the UI before I dive into coding, but it seems like the official Sketch templates on the Design Resources page only have templates for the Series 8 and SE 2 on watchOS 10. I want to use the Series 10's screen size for my layouts since it's the model I have, but I can't find a template for it. Will the official templates be updated for the new models? If not, does anyone know of a third-party template I can use? Thanks in advance!

Hi is there possibly to put text data or information into Roomplanapi elements like data wall color etc and export to usdz after lidar scan

Hi, I have the following code, which for some reason is not working as expected. I have an .onAppear and a .task function that isn't running, which I can see isn't running because nothing is printing. Any guidance would be greatly appreciated. Thank you. struct ContentView: View { var body: some View { ZStack { switch view { case .view1: View1() case .view2: View2() case .view3: View3() case .view4: View4() case .view5: View5() default: SubscriptionStoreView(groupID: "") } } .onAppear() { view = .view6 print("test 1") } .task { print("test") await refreshPurchasedProducts() } } func refreshPurchasedProducts() async { // Iterate through the user's purchased products. for await verificationResult in Transaction.currentEntitlements { switch verificationResult { case .verified(let transaction): print("verified") case .unverified(let unverifiedTransaction, let verificationError): print("unverified") default: print("default") } } } }

My newly released App Snapshot-Chess-Move, #1592848671, is not creating a public database of chess moves as I expect. What steps do I need to do inorder for my App to be using a public database. It appears as if each of my iOS devices, iPhone, iPad and Mac mini each have a private database of chess moves. When I change my data on the iPad, I expect the new data to appear (with slight delays) on the Mac.. I do not know what to do next. Please help me. This was working in Development mode but not in Production when I submitted my App for release. UPDATE: The cloud data is copied locally to a @Quary variable and updated by using .insert, .delete and .save commands. So, I deleted and re-downloaded my apps on each device, iPad, iPhone, and Mac and obtained the same cloud data. So how do users get the most recent copy of the cloud. Do they need to delete their App and start over? Is there a .update command that can do this updating for me? Also, I pushed the App out of the background and restarted the App to obtain the updated cloud data.

I noticed a discrepancy between the Material specifications for tvOS on the Developer page and the naming in the Design Resources (Sketch files). Which one should we consider authoritative? Apple developer design web page：https://developer.apple.com/design/human-interface-guidelines/materials design resource（sketch）

I noticed a discrepancy between the Material specifications for tvOS on the Developer page and the naming in the Design Resources (Sketch files). Which one should we consider authoritative? https://developer.apple.com/design/human-interface-guidelines/materials

Scenario is when keyboard is opened within the app being developed then switch to other app, for instance, Notes app and create a note to enable keyboard from there. While the Notes app keyboard is active switch back to the developed app the keyboard in it is dismissed. Any thoughts?Thanks

I'm programming my constraints in my video game, which is working good so far until I ran into my most important interactive storyboard. I have three buttons that move back and forth on the Y position each time they are hit. The buttons Y positions only change to view.safeAreaLayoutGuide.centerYAnchor, constant: 100 or view.safeAreaLayoutGuide.centerYAnchor, constant: 200 or view.safeAreaLayoutGuide.centerYAnchor, constant: 300 The strange part is the button that is in the Y 100 stays visible and I can hit the button that is in the Y 100. The buttons in the Y 200 and Y 300 positions are visible until after one or two hits, then the button that is in Y 300 position disappears, then after another hit or two the button that is in the Y 200 position disappears but the button that is in the Y 100 is still visible. I cleared all my constraints to narrow it down to clear view of the constraints that is causing the problem. I do not think this Log Noise. Below is the error log: load_eligibility_plist: Failed to open //private/var/db/os_eligibility/eligibility.plist: Operation not permitted(1) 1 Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7610 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>", "<NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>", "<NSLayoutConstraint:0x302acb5c0 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7890 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>", "<NSLayoutConstraint:0x302acb700 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7890 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. 3 Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7610 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>", "<NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>", "<NSLayoutConstraint:0x302acb5c0 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>

I would like to modify the content of a published LocationNode upon been clicked by the user. But unfortunately: func hitTest(_ point: CGPoint, options: [SCNHitTestOption : Any]? = nil) -> [SCNHitTestResult] returns an SCNNode array from which it is impossible to retrieve the original LocationNode being inserted in order to be able to modify it. Of course the solution would be to either insert the SCNNode corresponding to the inserted LocationNode in a custom class or conversely insert the identifier of the custom object as a tag of the LocationNode, in order to solve the issue. But both options seem impossible to implement. May anyone help me?

I use swiftui to build apps on iPhone and iPad. There is no problem with the iPhone app. The game display is fully shown on iPhone. However, for the iPad, the game display is not shown and the screen goes black. I had to tap the button on the upper left side.(looks like a side view button) After that, the game display is only shown in the left side in a very small size. How can I make the game display fully shown in the iPad?

Below is the sample css code where I render a web page in my webview screens fonts became too small after 18.4 and its so hard to read when I launch my app . Any workarounds to address this issue .sg-labels-canvas { font-size: 15px; display: flex; flex-direction: column; font-family: -apple-system, BlinkMacSystemFont, 'Helvetica Neue', Roboto, sans-serif; font-style: normal; }

Hello, I have used CPPointOfInterestTemplate for displaying data and as user scrolls using the up/down arrow, I do not see any change in the map. Is there a way to highlight the POIs as the user scrolls through the list? I need to use the map controls and zoom to check the markers on the map. Is it possible to set the zoom level of the map in CarPlay? Pls suggest on the above queries

Hi, I have a couple of questions in regards to testing in-app purchases. I tested the subscription on a device but I'm not sure how to reset so I can test again. I didn't see the subscription in device settings or in Debug -> StoreKit -> Manage Subscriptions window. Additionally, I was wondering if there was a way to detect the subscription being made. I implemented this, but I'm not sure if that will work: .onChange(of: Product.SubscriptionInfo.RenewalState.subscribed) { if Product.SubscriptionInfo.RenewalState.subscribed == .subscribed { } }

Dear Developer, Is there a way to create a function to search with inside a text without having to be outside all of the messages? In other words, could I go into one of my contact’s texts and then search specifically inside that message as can be done on Android? This would be such an amazing function And make life so much easier. Thank you.

So…I am hitting a wall here and could use some guidance towards best practice. I’ve developed an app in Xcode/SwiftUI that renders just fine on the iPhone - text, images, buttons, frames…everything is nicely centered on the screen or scrolls where and when I want. The iPad though…not so much. I’m having issues with tops and bottoms being cut off in scrollviews. These are just straight up text screens too - the ones with other elements/controls…they’re rendering fine. I’ve tried a mix of geometry, vstack, scrollview, padding, spacers…the lot of it. Nothing I seem to do works - the views do not want to fill and fit properly. And, of course, the issue becomes worse the moment you flip the iPad into landscape view. Or use the 13” models. I’d imagine others are battling these issues as well and found solutions, so I decided to hit up the brain trust.

I've been beating my head against the wall over a scrollview issue where the top and bottom are cut off in landscape mode. Portrait mode - everything runs swimmingly. The moment I flip the iPad on its side, though, I lose about a quarter of the view on the top and bottom. I thought this was something to do with framing or such; I ran through a myriad of frame, padding, spacer, geometry...I set it static, I set it to dynamically grow, I even created algorithms to try to figure out how to set things to the individual device. Eventually, I separated the tablet and phone views as was suggested here and on the Apple dev forums. That's when I started playing around with the background image. Right now I have.... ZStack { Image("background") .resizable() .scaledToFill() .ignoresSafeArea() ScrollView { VStack(spacing: 24) {.... The problem is the "scaledToFill". In essence, whenever THAT is in the code, the vertical scrollview goes wonky in landscape mode. It, in essence, thinks that it has much more room at the top and the bottom because the background image has been extended at top and bottom to fill the wider screen of the iPad in landscape orientation. Is there any way to get around this issue? The desired behavior is pretty straightforward - the background image fills the entire background, no white bars or such, and the view scrolls against it.

When we are going to have a real analog clock option on the lock screen. If an apple watch can do it surely its not that difficult. For someone who uses a clock to tell what time it isn't as opposed to what time it is, i’m constantly having to convert a digital image where the image of hands on a dial is so much easier. Surely this isnt because someone has forgotten how to read a clock

I found that on my cutomer's mac device, webflterproxyd start interferiing with the NE traffic. Tried to stop it, but "screen time" was not enabled at all. Who started this webfilterproxyd process and how to stop it?

Hi, Normally we need many shades of gray in any App and Apple system have only 3 , Primery, Secondary, and Gray, so to make Gray regress that automatically adapt to Dark Mode we just use opacity on these colors ? there's no system built in Gray degrees ? Kind Regards