Hi!!! I can't publish the app as I have a paid membership through Stripe. I have a wordpress site and have a paid membership to access the content... The app is geared by a third party service and I can't put any code into it... What can I do? There is an idea that in the application to display a link to the site where to place the payment for membership... Please advise, I'm not the first to face this....

My iphone 11 pro max in ios 26 is not a liquid glass like other

O v er the past few months, I’ve been experiencing persistent, abnormal behavior on my iPhone. Here's a short timeline: March 2025: Most apps log me out every time I close them. April 2025: Stored passwords suddenly begin failing across apps and websites. May–June 2025: Password recovery emails from Gmail accounts no longer arrive — suggesting that Gmail itself may be compromised or blocked/intercepted. Given the escalation, I ran several diagnostics and extracted system-level logs. Below is a structured summary of findings that point toward potential remote access, network traffic rerouting, and possibly hidden use of Bluetooth or debugging interfaces. ##1 Source: remotectl_dumpstate.txt More than 50 remote lockdown and diagnostic services are listed as active. Notable entries: com.apple.mobile.lockdown.remote.trusted and .untrusted com.apple.mobile.file_relay.shim.remote com.apple.webinspector.shim.remote com.apple.pcapd.shim.remote com.apple.bluetooth.BTPacketLogger.shim.remote com.apple.mobile.insecure_notification_proxy.remote This volume of .shim.remote and diagnostic services appears highly irregular for a non-debug, non-jailbroken device. 2. Skywalk Network Flows and Unusual Routing Source: skywalk.txt Dozens of flowswitch entries across interfaces like: ipsec0-7, pdp_ip0-2, en0-2, awdl0 Apps such as Gmail, ChatGPT, Preferences, and com.apple.WebKit are marked as defunct, yet persist in flow tables. Two specific daemons — replicatord and siriactionsd — appear on nearly every interface, in both QUIC and TCP6 traffic. skywalkctl flow-route shows multiple external IP paths, with flows routed through ipsec7, owned by kernel_task.0 — which could indicate system-level tunneling. 3. System Anomalies and Resource Behavior Inaccessible System Network Tools Source: get-network-info.txt All scutil calls fail (/usr/sbin/scutil does not exist). This blocks access to: DNS configuration (scutil --dns) Proxy and VPN status (scutil --proxy, --nc list) Reachability checks (scutil -r www.apple.com) Key Questions for the Developer Community Are >50 remote .shim.remote services typical on iOS 18.5 (release build)? Or does this suggest tampering, an MDM configuration, or debug provisioning? Could a misconfigured VPN or MDM profile enable persistent flow-switching across multiple interfaces (e.g., ipsec, pdp, awdl) and reroute app traffic such as Gmail? Is it possible for a test or developer certificate to silently side-load a background daemon, or trigger services like pcapd or file_relay, without showing in Profiles or Settings? Has anyone else seen the scutil binary missing or inaccessible on a stock iPhone? Could this be a sign of intentional lockdown or system modification? If anyone on iOS 18.5 / iPhone17,1 can share their remotectl_dumpstate output, I'd like to compare the service count and see if this behavior is reproducible. I’d appreciate any insight from those familiar with Apple’s system daemons, skywalk internals, or network service behavior. Happy to share sanitized logs or run additional diagnostics if needed. Thanks in advance. get-network-info.txt route-info.txt remotectl_dumpstate.txt [ assetsd.diskwrites_resource-2025-06-25-221428.json linkText

Hello. On iOS 26 Public Beta I can’t seem to find the feature to delete a contact picture from the contacts app. It seems I can only replace but not delete. Is this just my problem?

Hi all, Im trying tu publish an app for iOS and I get it rejected by the lack of this privacy manifest, but unless I understood this wrong, this manifest is needed for external tools used, or maybe Im wrong, Im publishing an app made in Unity, so in this case, one has to include a privacy manifest by default? Sorry Im lost in all these terms, so I don't know if im asking something redundant, if you know how to fix this issue please tell me or direct me to the process because I haven't been able to identify the issue. Thanks a lot for any clue beforehand really

Okay… help me out, I’m behind on the times. Upgraded to the 26 beta from … honestly I think I was still using 16-something? And I’m wondering where the photo markup feature went? To be clear, I’m referring to the ability to write on a photo or screenshot from the Photos app by clicking “Edit”, then “Markup”. Is it gone or am I overlooking it? And do forgive me if this feature has been gone for a while already—as I mentioned, it’s been a while since I bothered with an iOS update. (So far, I definitely liked the version I was on previously much more!)

What are the steps in order to safely partition a drive to run MacOS26 for testing on my main machine without corrupting the main machine, please advise? My machine is a Mac Pro M3 Max Apple Intelligence/Foundation Models DO NOT WORK on Parallels VM. I cannot afford to buy new machines. My current one is maxed out on GPU/CPU and memory. TIME SENSITIVE

I would like to inquire about an error that has started occurring while debugging AppStore billing. (In sandbox environment) This error occurs after entering a password and completing the purchase process, and in this case, no completion alert appears. The error doesn't seem to depend on the purchase item, sandbox account, or device, and shows unstable behavior - sometimes succeeding and sometimes failing. Additionally, this error started occurring after special debugging where the network was disconnected during the purchase process. Moreover, the same error occurs in the TestFlight version of our already released normal (supposedly) version. I think this might be a sandbox-specific error where the system has temporarily become unstable, but what do you think? If so, how can I resolve this issue? I would appreciate your insights on the cause and appropriate response. Error details below: <SKPaymentQueue: 0x283b3d070>: Payment completed with error: Error Domain=ASDErrorDomain Code=500 "(null)" UserInfo={NSUnderlyingError=0x28364d770 {Error Domain=AMSErrorDomain Code=305 "Purchase Failed" UserInfo={NSLocalizedDescription=Purchase Failed, AMSStatusCode=200, AMSServerPayload={ "cancel-purchase-batch" = 1; customerMessage = "Unauthorized_message"; failureType = ""; "m-allowed" = 0; pings = ( ); }, NSLocalizedFailureReason=Server canceled the purchase}}, storefront-country-code=JPN, client-environment-type=Sandbox}

When anyone calling through cellular call first calls don’t show or call notifications in screen even didn’t play ringtone . but if caller calling second time then ringing tone play properly. this problem happen my iphone 15 pro .128gb im from india . )

I just wanted to see if it’s normal that the beta 4 is very slow and can even freez some times

Dear team, I am reaching out to inquire about potential daily usage limits for the CoreLocation geocoding services. While I understand that there is a known limit of approximately 50 requests per minute, I have received information suggesting there may also be a daily cap of 25,000 requests. Could you please confirm whether such a daily limit exists? Additionally, I would appreciate any recommendations you might have for increasing the allowable number of daily geocoding requests, if possible. Thank you in advance for your support.

NSURLSessionConfiguration *cfg = [NSURLSessionConfiguration defaultSessionConfiguration]; cfg.allowsCellularAccess = YES; cfg.multipathServiceType = NSURLSessionMultipathServiceTypeInteractive; NSURLSession *session = [NSURLSession sessionWithConfiguration:cfg]; NSURL *url = [NSURL URLWithString:@"https://www.apple.com"]; [[session dataTaskWithURL:url completionHandler:^(NSData *data, NSURLResponse *resp, NSError *err) { if (err) { NSLog(@"❌ Request failed: %@", err); } else { NSLog(@"✅ Received %lu bytes via %@", (unsigned long)data.length, resp.URL.absoluteString); } }] resume]; When I use NSURLSession and set multipathServiceType = NSURLSessionMultipathServiceTypeInteractive, whenever I’m connected to a Wi‑Fi network without Internet access, all of my app’s network requests automatically and seamlessly fall back to cellular to fetch data. Why, then, can’t WKWebView load pages? What do I need to configure? Notes: My developer account already has the Multipath entitlement. I’ve added the Multipath capability under Signing & Capabilities in Xcode. In my .entitlements file I’ve set com.apple.developer.networking.multipath = true.

Hi everyone, After updating to iOS 26 Developer Preview on my iPhone, I’m experiencing a repeated issue with certain third-party apps. ⸻ -Issue details: • The apps open as if freshly installed, showing the onboarding or login screen each time • User session is completely lost (no saved login or data) • Around 10 seconds after launch, the app automatically closes • It disappears from the app switcher (not just backgrounded) • This happens every time, with no crash message or error shown ⸻ -What I’ve tried: • Reinstalled the apps • Restarted the device • Toggled Face ID, Background App Refresh, etc. • Confirmed I’m running the latest iOS 26 Developer Preview build ➡️ Problem still occurs exactly the same way ⸻ -Feedback status: I submitted a report via Feedback Assistant with a screen recording and full reproduction steps. No response yet after several days. ⸻ -Looking for: • Confirmation from others with similar issues • Info on whether this is already being tracked by Apple • Whether it’s worth resubmitting a new Feedback report Thanks for any insight.

Recently have updated one phone to the new 18.6 public beta and now I cant log into my Cox hotspot. It pops up asking for username/password as always, but when you click either of them to type it in it closes the window. Tested my second phone that wasnt updated and works just fine. Updated it to the new 18.6 and now the same thing happens

Connect the Zigbee color temperature light bridge to the Home app through the Matter Bridge (a device with a screen), and adjust the color temperature of the light on the screen. However, the color temperature of the corresponding device on the Home app is not synchronized, as shown in the following figure What information is missing from the Home app when my device reports color temperature during control?

i want to make purchase for app subscription (recurring payment) but it showing debit card "not accepted by app" why is that

Hi, After installing Macos 26 Beta on my Mac Mini M1 it doesn't boot. On the front panel there is an orange blinking light. The monitor doesn't recognize it. In DFU mode my other Mac Mini (M4) recognizes it but I can't restore it from Configurator (see print). Thanks for your help.

Hello All, I would like to nominate my app for the coveted position of a “featured app.” However, it appears that I would have had to submitted the app before it went live a few weeks ago. Does anyone have any suggestions? Is there another form out there to fill out the app information for submission? Thank you for any help! Darien Pilates Mastery™

Frequently, when transferring large files using AirDrop, it will suddenly fail mid-transfer. Looking into the macOS logs reveals the fault: error 19:45:25.701432-0700 sharingd SDAirDropFileZipper: bomCopierFatalErrorPtr - cpio read error: bad file format error 19:45:25.701517-0700 sharingd SDAirDropCompressor: CFWriteStreamWrite returned -1 default 19:45:25.701533-0700 sharingd Zipper Update: Error Domain=NSPOSIXErrorDomain Code=5 "Input/output error" UserInfo={NSLocalizedDescription=cpio read error: bad file format} default 19:45:25.706094-0700 sharingd Closing output stream default 19:45:25.707901-0700 sharingd Invalidating XPC helper for macOS downloads directory error 19:45:25.708039-0700 sharingd Decompression failed Error Domain=NSPOSIXErrorDomain Code=5 "Input/output error" UserInfo={NSLocalizedDescription=cpio read error: bad file format}

I have more than five tabs in a TabView, and on some screens, I'm seeing a navigation bar with the title "More". I understand that this is the default behavior of TabView when there are more than five tabs—iOS automatically creates a "More" screen. I've set navigationBarHidden = true throughout my app, but the navigation bar still appears on some screens within the "More" section. Is there another way to hide the moreNavigationController or completely remove the navigation bar from the "More" screen?