Hello, I installed iOS 26 beta 1 yesterday when it came off but now, when I plug my iPhone, it just do nothing. I can charge it via the induction charger but I can't via USB-C port. The other way I can charge it is by turning my iPhone off and plugging it so it starts and then it charges via USB-C Port even when it starts. The thing is that when I unplug the cable and try to plug it back in, it doesn't charge anymore... I tried to put the restore mode (with the Mac and the cable on the screen) and even the DFU Mode but the iPhone is not detected by my Macbook and it's the same thing for my Windows PC : not detected... I also tried to erase the settings and content but same issue... Not charging Apple Store can do nothing because it's a dev beta... Am I the only one to have that issue ?

Hello all, I have an application that uses broadcast extension of Replay kit to record the entire screen and mic sound to a file on iOS. Up until some months ago, everything was smooth. Currently I am facing the following issue. If another app uses the microphone, then I loose the sound and never comes back. In order to debug this issue I have added a log to the processSampleBuffer, that logs a text each time it receives a .audioMic buffer type. I start the recording and everything works as expected. Later on, I go onto an app that uses microphone, and then I do not get any log for audioMic. I stop the recording on that app, but the sound never comes back. This as a result makes my video file to not have any sound at all. In the above context I also noticed that even with Photos app broadcast extension, if you start recording a video, and you go to Speech to text feature of the keyboard, then the sound is joined. While the STT is on, there is no sound and the sound of whatever comes after STT stops is joined to the sound before the STT starts, so I guess that this is something general. Also on the same research I did, I saw that google Meet app does not allow any microphone to be used from another app while you are in a meet (Even the STT is grayed out). I would like to know my options here. What can I do to have a valid video file with sound? How can I not allow other apps to use the microphone while my app is recording? Is there any entitlement? How does Google Meet do that? P.S. I have added an observer to observe the interruptions for the session and the type .began runs, but the type .ended does not, so I can not actually set the AVAudioSession to active again.

Maybe a bit of a simplistic question, but…. Best ways to create music - programmatically - within an app? I have a few small, simple games that I would like to add some background music to. I’ve fiddled with AVAudio, SKAudio, and now AudioKit. I’m just not quite finding the holy grail of music generation. I don’t know if it’s more technique or tool. So I thought I’d hit up the pool of minds here for some suggestions…?

After doing a software update I can only view iMessages older than 12hrs (from a single contact) if the other person replies to and older message. Every time I leave the Massages app and go back in the issue occurs again.

Hi, Having a weird issue that I’m noticing on Apple TVs with some apps that are by the same company. I think it’s storing residual user data if if you delete the app and all other apps relating to this. I have even tried deleting every app and reinstalling but we found two apps to be still logged in. Seams like a sandboxing bug and I presume it’s to do with App data stored in the shared app groups. I can only reset the apple tv to remove the user data. The two apps we can see are being persistent is Binge and Kayo by streamotion. We have tried problem solving this in every way imaginable but it’s Interesting that this is allowed to happen on an Apple platform. There is no active user logged into the apple TV with an Apple ID either

Hello, The icloud main account with our app was closed for some reason we don't know why. We are unable to take action because we cannot accept current apple policies. We are unable to change the app's main account, and we have not been able to find out how to do this from Apple Turkey Support. How can we solve this problem?

As the title states, and it’s extremely frustrating. The floating bar that now appears above the keyboard is cool compared to the built in bar, though it seems to only work when it feels like it. Also the screen seems to have a haze around it, sometimes I cannot read whats needed because of it being blurred and it won’t allow me to navigate to certain things due to the haze being there too. Any way of rolling back my update and going back to my previous iOS?

Frequently, when transferring large files using AirDrop, it will suddenly fail mid-transfer. Looking into the macOS logs reveals the fault: error 19:45:25.701432-0700 sharingd SDAirDropFileZipper: bomCopierFatalErrorPtr - cpio read error: bad file format error 19:45:25.701517-0700 sharingd SDAirDropCompressor: CFWriteStreamWrite returned -1 default 19:45:25.701533-0700 sharingd Zipper Update: Error Domain=NSPOSIXErrorDomain Code=5 "Input/output error" UserInfo={NSLocalizedDescription=cpio read error: bad file format} default 19:45:25.706094-0700 sharingd Closing output stream default 19:45:25.707901-0700 sharingd Invalidating XPC helper for macOS downloads directory error 19:45:25.708039-0700 sharingd Decompression failed Error Domain=NSPOSIXErrorDomain Code=5 "Input/output error" UserInfo={NSLocalizedDescription=cpio read error: bad file format}

Hey there, Just writing here to say how I do enjoy the latest update, but I can’t seem to run it on my iPhone 14 Pro well because it tends to overheat. i can deal with the stuttering issues and app crashes, that’s understandable, but for some reason the hardware seem to really heat up after normal use (scrolling on social media platforms). oh also, I do think rolling back your phone‘s software should be a simpler process as well. It’s not impossible, but the demand of a computer in reinstating a previous backup when iCloud backups your device through WiFi seems like a missed opportunity. Okay. Thank you for reading.

In e-sim after before some time not richeble the internet it was the big issue for me

i am seeing a call icon on CallKit incoming call screen for a PushKit-initiated call (without caller information like name or number)

Hi all, Im trying tu publish an app for iOS and I get it rejected by the lack of this privacy manifest, but unless I understood this wrong, this manifest is needed for external tools used, or maybe Im wrong, Im publishing an app made in Unity, so in this case, one has to include a privacy manifest by default? Sorry Im lost in all these terms, so I don't know if im asking something redundant, if you know how to fix this issue please tell me or direct me to the process because I haven't been able to identify the issue. Thanks a lot for any clue beforehand really

I download a demo from:https://applepaydemo.apple.com/wallet-extensions And I run my WalletUIExtention,but it's failed. This is some key in my info.plist <key>NSExtensionMainStoryboard</key> <string>MainInterface</string> <key>NSExtensionPointIdentifier</key> <string>com.apple.PassKit.issuer-provisioning.authorization</string> <key>NSExtensionPrincipalClass</key> <string>MyAUViewController</string> But I found that deleting the key: NSExtendesionPrincipalClass or NSExtendeionMainStoryboard in the info.plist file can make it run. Should I delete the key ? Whitch key ? This is it alert: This it's message: 2025-05-06 09:15:02.946890+0800 WalletUIExt[626:13530] Successfully load keyboard extensions Line: 1 Col:1 2025-05-06 09:15:02.972702+0800 WalletUIExt[626:13597] [xpc.exceptions]<NSXPCConnection: 0x2830c30c0> connection from pid 584 on mach service named com.bank.app.WalletUIExt.viewservice: Exception caught during decoding of received selector __connectToViewControllerFromRemoteViewController:replyHandler:, dropping incoming message. Exception:<NSXPCDecoder: Qx12a82bc00> received a message or reply block that is not in the interface of the remote object (__connectToViewControllerFromRemoteViewController:replyHandler:),

Over the past few months, I’ve been experiencing persistent, abnormal behavior on my iPhone. Here's a short timeline: March 2025: Most apps log me out every time I close them. April 2025: Stored passwords suddenly begin failing across apps and websites. May–June 2025: Password recovery emails from Gmail accounts no longer arrive — suggesting that Gmail itself may be compromised or blocked/intercepted. Given the escalation, I ran several diagnostics and extracted system-level logs. Below is a structured summary of findings that point toward potential remote access, network traffic rerouting, and possibly hidden use of Bluetooth or debugging interfaces. Device Information Model: iPhone17,1 (A17 chip) iOS Version: 18.5 (Build 22F76) Status: Stock, not jailbroken or running a developer build Region: Netherlands Carrier: KPN NL Language/Locale: Dutch (nl-NL) 1. Evidence of Remote Services and XPC Connectivity Source: remotectl_dumpstate.txt More than 50 remote lockdown and diagnostic services are listed as active. Notable entries: com.apple.mobile.lockdown.remote.trusted and .untrusted com.apple.mobile.file_relay.shim.remote com.apple.webinspector.shim.remote com.apple.pcapd.shim.remote com.apple.bluetooth.BTPacketLogger.shim.remote com.apple.mobile.insecure_notification_proxy.remote This volume of .shim.remote and diagnostic services appears highly irregular for a non-debug, non-jailbroken device. 2. Skywalk Network Flows and Unusual Routing Source: skywalk.txt Dozens of flowswitch entries across interfaces like: ipsec0-7, pdp_ip0-2, en0-2, awdl0 Apps such as Gmail, ChatGPT, Preferences, and com.apple.WebKit are marked as defunct, yet persist in flow tables. Two specific daemons — replicatord and siriactionsd — appear on nearly every interface, in both QUIC and TCP6 traffic. skywalkctl flow-route shows multiple external IP paths, with flows routed through ipsec7, owned by kernel_task.0 — indicate tunnelling? 3. System Anomalies and Resource Behavior Inaccessible System Network Tools Source: get-network-info.txt All scutil calls fail (/usr/sbin/scutil does not exist). This blocks access to: DNS configuration (scutil --dns) Proxy and VPN status (scutil --proxy, --nc list) Reachability checks (scutil -r www.apple.com) The absence of scutil is not expected right? Unusual Resource Usage Source: assetsd.diskwrites_resource-2025-06-25.json assetsd, working on behalf of cloudphotod, wrote over 1 GB of memory-backed files in under 1.5 hours. 4. Metadata Confirmation Source: Analytics-2025-06-27-020008.json Confirms: iPhone capacity: 256 GB DRAM: 7.5 GB Carrier: KPN NL Apps marked as highly active ("Games", "Creativity") in analytics also appear as defunct in skywalk, suggesting ghost background processes. Key Questions for the Developer Community Are >50 remote .shim.remote services typical on iOS 18.5 (release build)? Or does this suggest tampering, an MDM configuration, or debug provisioning? Could a misconfigured VPN or MDM profile enable persistent flow-switching across multiple interfaces (e.g., ipsec, pdp, awdl) and reroute app traffic such as Gmail? Is it possible for a test or developer certificate to silently side-load a background daemon, or trigger services like pcapd or file_relay, without showing in Profiles or Settings? Has anyone else seen the scutil binary missing or inaccessible on a stock iPhone? Could this be a sign of intentional lockdown or system modification? If anyone on iOS 18.5 / iPhone17,1 can share their remotectl_dumpstate output, I'd like to compare the service count and see if this behavior is reproducible. I’d appreciate any insight from those familiar with Apple’s system daemons, skywalk internals, or network service behavior. Happy to share sanitized logs or run additional diagnostics if needed. Thanks in advance. get-network-info.txt route-info.txt remotectl_dumpstate.txt [ assetsd.diskwrites_resource-2025-06-25-221428.json

I've got the initial WWDC beta of macOS 26 (25A5279m) installed inside a virtual machine (UTM), but can't seem to update to the second beta. Nothing is showing up within Software Update. Is this because it's within a VM, or am I doing something wrong? It'd be a real pain to have to install a new VM afresh with the RestoreImage for every update.

I have an iPhone 14 running iOS 26 Beta 2 that I wanted to start using Personal Voice on. It allowed me to complete the recordings and start the process, however even with the phone charging and locked the process hangs. It is connected to WiFi and cellular while attempting to run. It is connected to a 20W apple charger with an offical cable. I have a sneaking feeling it's related to me running the iOS beta on this device. I've provided some info below. iOS 26 Beta 2 iPhone 14 128gb Model MPUF3ZD/A No SIM restrictions

Looking to start developing at Swift. What is the best way to get started with a job related to Swift development? Is there any specific demanded certification I could pursue? Thank you.

Hello all, We are in the process of deploying EAP-TLS Wi-Fi authentication across our corporate environment for both Windows and macOS devices. All endpoints are managed via Workspace ONE. As part of our macOS configuration, we are pushing device certificates to the login keychain of managed MacBooks. For testing purposes, we have explicitly set the Access Control List (ACL) of the associated private key to allow all applications access. This includes: eapolclient, which handles the EAP-TLS handshake for Wi-Fi panGPS, which is responsible for establishing the GlobalProtect VPN connection (we are using certificate-based authentication with pre-logon enabled) Additionally, we have configured and deployed a Wi-Fi profile via Workspace ONE to prevent users from having to manually select their device certificate - basically the identity preference card in Keychain Access. Despite these settings, we are still encountering Keychain Access prompts when eapolclient attempts to access the private key. This happens even though the key is configured to allow all applications access. This behavior is unexpected, and we’re trying to understand why these prompts persist. Has anyone encountered similar behavior on macOS, or is there something we're missing in terms of permissions or keychain configuration that could be causing this? We would greatly appreciate any insight or guidance. Thank you, Kyo

As developers of an app with a free basic version and a paid premium version, we recently received a malicious review on our premium app. The review falsely accused our app of being a scam and baselessly claimed it was error-ridden. This comment is clearly malicious and designed to dissuade other users from purchasing our app. The most critical point is that we haven’t had any sales records in that region recently. In response to this review, we promptly contacted Apple Support but received only a generic, templated response stating that no action would be taken. We followed up with another complaint about the review, but it was still dismissed. Apple Support provided a link to their guidelines, and within those guidelines, we found specific clauses that Apple should act upon in cases like this. We sent another email pointing this out, but we’ve received no response since. It feels like developers are left defenseless against such malicious reviews. When we face these attacks, there’s no fair judgment, and Apple doesn’t uphold the very policies it has set to protect developers’ rights. If this continues, how can developers trust this platform to safeguard their basic interests?

It works if Bluetooth is on for a long time, is there any problem? I'm developing an app using beacon and Bluetooth, and I have to operate the app in the background, and after spending the weekend, I have to detect the beacon and revive the app. I can see that there is an app in the background, but the app is not coming back to life. How can I solve this problem? Or is the OS team working on something to block it? The test model is Iphone16Plus.