I have updated my iPhone 14 Pro to iOS 26 without any problems. I also have AirPod Pro A2698 version 7E93. The new update of the firmware is not shown.developer mode is activated.on the pre-release is AirPod Pro visible if connected but no possibility for an update.what am I doing wrong or is there any thing I have to wait for thank you

After the last OS26 developer beta update the watch series 6 battery drains fast, in less than two hours life. I visited Apple Store , they said the battery was dead so I had to buy new watch series 10 The same issue happened in the new watch, the battery meter shows 50% after 1 hour Right now I’ve downgraded my update version to beta 11 until I can find a solution

Hi, I have a ninth generation iPad updated to iPados 26 beta 3 but now it no longer updates to the latest version of iPados 26, what can I do?

The iPhone XS Max and Garmin watch pairing cannot use BLE to send Scan Response; it can only send BLE advertisements. May I ask if this is a limitation of the Apple system? So far, we have tested several iPhone models, and only the iPhone XS Max has this issue. We are not sure if other untested models have the same problem.

I have been experiencing an issue with my MacBook Air 2024 model that is equipped with the latest M3 chip. After upgrading to the beta version of the operating system, I've noticed that when I close the lid to put the laptop to sleep, and then open it to wake it up, the system unexpectedly restarts instead of resuming from where it left off. This behavior is not only inconvenient but also raises concerns about potential data loss or corruption during the unexpected restarts. I understand that beta versions can have bugs, but I was hoping to receive some guidance on whether this is a known issue or if there are any steps I can take to troubleshoot and resolve this problem. Any assistance or insights into this matter would be greatly appreciated.

Hello, Can anyone tell me what this means? Or if it's normal? I'm seeing about 10% battery drain per day on sleep, and pmset -g log shows wakes nearly every minute. 2025-06-10 17:10:35 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 5 secs 2025-06-10 17:10:43 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:13:49 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 8 secs 2025-06-10 17:14:01 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:14:10 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:15:01 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:16:31 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:18:07 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs Looking at one section of them: 2025-06-10 22:00:46 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:90%) 6 secs 2025-06-10 22:00:46 -0700 WakeDetails DriverReason:smc.70070000 - DriverDetails: DriverReason:wifibt - DriverDetails: DriverReason:SMC.OutboxNotEmpty - DriverDetails: 2025-06-10 22:00:46 -0700 HibernateStats hibmode=3 standbydelaylow=0 standbydelayhigh=0 35177 2025-06-10 22:00:46 -0700 WakeTime WakeTime: 0.094 sec 2025-06-10 22:00:46 -0700 Kernel Client Acks Delays to Sleep notifications: [Port-USB-C driver is slow(msg: SetState to 0)(60 ms)] 2025-06-10 22:00:46 -0700 Kernel Client Acks Delays to Wake notifications: [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(77 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(77 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(121 ms)] [Port-USB-C driver is slow(msg: SetState to 0)(59 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(120 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(123 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(116 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [powerd is slow(5915 ms)] [Port-USB-C driver is slow(msg: SetState to 0)(64 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(78 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(119 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(122 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(77 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(77 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(117 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(76 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(76 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(119 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: DidChangeState to 1)(76 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(121 ms)] [Port-USB-C driver is slow(msg: SetState to 0)(58 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(77 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(77 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(117 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(76 ms)] 2025-06-10 22:00:48 -0700 com.apple.sleepservices.sessionTerminated SleepService: window has terminated. 2025-06-10 22:00:52 -0700 Assertions PID 323(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:05 id:0x0xd00009032 [System: PrevIdle] 2025-06-10 22:00:52 -0700 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using Batt (Charge:90%) 14 secs 2025-06-10 22:00:53 -0700 Assertions Summary- [System: PrevIdle] Using Batt(Charge: 90) 2025-06-10 22:00:53 -0700 Wake Requests [process=mDNSResponder request=Maintenance deltaSecs=6474 wakeAt=2025-06-10 23:48:48 info="DHCP lease renewal"] [*process=dasd request=SleepService deltaSecs=979 wakeAt=2025-06-10 22:17:13 info="com.apple.dasd:501:com.apple.intelligenceplatform.IntelligencePlatformCore.Pipeline.FastPass"] [process=powerd request=TCPKATurnOff deltaSecs=227969 wakeAt=2025-06-13 13:20:22] [process=powerd request=CSPNEvaluation deltaSecs=2005 wakeAt=2025-06-10 22:34:18] [process=powerd request=UserWake deltaSecs=7086 wakeAt=2025-06-10 23:59:00 info="com.apple.alarm.user-visible-com.apple.donotdisturb.server.ScheduleLifetimeMonitor.timer,619"]

Hi everyone, It’s been almost three weeks, and I’m still waiting for a reply about my subscription to the Apple Developer Program, but I haven’t received anything. I replied to the email three days ago and got no response. I tried again by requesting the subscription two days ago, but all I received was an automated message saying they would reply within two business days. What I did: I went to my Apple Developer account, clicked on Subscriptions, and entered my card details. They sent me an email saying they are preparing my order, but nothing else. Has anyone else had the same issue with Apple Developer support? Regards,

Where should I start?

Hey everyone anyone having any issues with some apps not loading or opening since upgrading

Too many irrelevant posts come up when I attempt to search for something. There should be an easy button or something to earmark posts as something irrelevant- something that shouldn't come up in a search. I'm looking for something in Xcode 15 and frequently the top posts in the search are 10 years old and don't have any relevance whatsoever to the solution to my problem.

Cannot Install Tahoe Beta 2 because Software Update Dialogue Box will not accept my Password (None in my case). Reports: "User interaction required" Recommendations?

Since the last Mac software upgrade, PDF's off my IMac are not being printed or aligned correctly. I have multiple printers and multiple apps and it all prints the same. This is not a "printer driver" issue or an app issue. I am suspecting that this may be an issue since upgrading to Sequonia 15.4.1. Looking to see if others have had this issue. Thanks.

Hi Apple Team & Everyone, Can someone guide me why sending 'diskutil eraseDisk APFS "WIPED" GPT /dev/disk0' command via terminal to remove/wipe the main physical drive (disk0) is failed? I tried booting into recovery mode, but it still didn’t work. The command returned the following error: Started erase on disk0 Unmounting disk The volume on disk0 couldn't be unmounted because it is in use by process 0 (kernel). Error: -69877: Couldn't open device I understand that we can use Disk Utility (GUI) to unmount and erase the drive. Is it possible to perform this operation via Terminal to erase disk0? I would appreciate any guidance on this. Regards, Winson

OS macOS 15.4.1 What steps will reproduce the problem? (0) Make sure you have other third-party browsers on your computer, and that their names start with a letter before "M", for me it is Arc browser. (1) Install a previous version of Edge Mac Canary (it can be downloaded from official web site:https://www.microsoft.com/en-us/edge/download/insider?cc=1&cs=426423789&form=MA13FJ). If you don't have an older version, you can download and save the current version, and then try the below steps after a day or two. (2) Eject the DMG from the Finder Sidebar. (3) Switch to the System Settings panel, set the "Default web browser" as Edge Mac Canary just installed. (4) Click a URL link from Notes, it will open in Edge Mac Canary. (5) Navigate to "Settings"->"About Microsoft Edge" in Edge and wait for the update information to show that update is complete (it will auto update to the latest version). (6) Check current result of "Default web browser" in System Settings again. What is the expected result? The "Default web browser" should still be Edge Canary. What happens instead? The "Default web browser" in System Settings will change to Arc. But this time, when you click the link from Notes, it will open in Safari, which means that "Default web browser is shown as Arc, but it is actually Safari. It is worth noting that if you start Edge Mac in step (3) and then set it as Default Browser in the "edge://settings/defaultBrowser" page, this problem will not occur after the update is completed. Chrome Mac has the same issue. Other Please see the video (https://youtu.be/ymWAanLqz1Y) for more details.

So I am in a group chat with my family. We’ve had this groupchat established for a long time, and none of us have ever added anyone else to it. Somehow last night, a different family member joined our group chat and started texting us, but none of the original chat members added her, not even accidentally. This is the second time this has happened, and we have no idea how they are inserting themselves into our group chat. We are all iphone users, including the person that is somehow adding themselves to our group chat. All of us use different Apple ID accounts as well as different phone numbers, and that’s the same for the person adding themselves, so I’m truly at a loss for how this is happening.

https://developer.apple.com/documentation/appstoreservernotifications/app-store-server-notifications-changelog#June-10-2024 ONE_TIME_CHARGE notify type running in a sandbox environment for almost a year, the feature is not yet available for production environment. The notification is already available in Google subscriptions. Our services often miss orders because of the absence of this notification. Can you give us an approximate time range?

Why can’t Apple just release a version that put the most frequent used emoticons in the most left side of the emoticons keyboard??? Each person always uses the same 20 or 30 emoticons. How this could be reported to developers? Thx

iOS 18 System Bug Causes URL Scheme Failure A bug in iOS 18 causes URL Schemes to become invalid through the following steps, resulting in failure to open apps via URL Scheme. Reproduction Steps: Long-press the app icon Select "Require Face ID" Choose "Hide and Require Face ID" to hide the app Go to the App Library and locate the hidden app in the "Hidden" folder Uninstall the hidden app reinstalling the hidden app After reinstalling the app, all configured URL Schemes will become invalid, causing failure when attempting to open the app via URL Scheme. The issue appears to be that after uninstalling a hidden app and reinstalling it, the system fails to restore the app's URL Scheme functionality.

Some users of my app complain that it stops responding to touch after a while. The screen is still updating, and the app seems to be working normally otherwise. It just doesn't respond to any touches anymore. It is not a problem with the touchscreen itself, because the user is able to swipe up to get to the home screen, and then interact with other apps as normal. When re-opening my app, it is still unresponsive to touch. The only way to solve it, is to restart the app. Does anybody have a similar experience, and knows what could cause it? The app is based on UIKit, and still written in Objective-C, if it matters. The iOS version involved does not seem to matter, it happened with a couple of them.

just updated macos to 15.5 beta 2, cannot login anymore! i reach the login screen, i enter the correct password, the loading bar stops at around 10%, after about 1 minute the system restarts, it return to the login screens, and so on… any suggestion about debugging this type of situation?