You can now easily request access to managed capabilities for your App IDs directly from the new Capability Requests tab in Certificates, Identifiers & Profiles > Identifiers. With this update, view available capabilities in one convenient location, check the status of your requested capabilities, and see any notes from Apple related to your requests. Learn more about capability requests.

General: Forums topic: Code Signing Forums subtopics: Code Signing > General, Code Signing > Certificates, Identifiers & Profiles, Code Signing > Notarization, Code Signing > Entitlements Forums tags: Code Signing, Signing Certificates, Provisioning Profiles, Entitlements Developer Account Help — This document is good in general but, in particular, the Reference section is chock-full of useful information, including the names and purposes of all certificate types issued by Apple Developer web site, tables of which capabilities are supported by which distribution models on iOS and macOS, and information on how to use managed capabilities. Developer > Support > Certificates covers some important policy issues Bundle Resources > Entitlements documentation TN3125 Inside Code Signing: Provisioning Profiles — This includes links to the other technotes in the Inside Code Signing series. WWDC 2021 Session 10204 Distribute apps in Xcode with cloud signing Certificate Signing Requests Explained forums post --deep Considered Harmful forums post Don’t Run App Store Distribution-Signed Code forums post Resolving errSecInternalComponent errors during code signing forums post Finding a Capability’s Distribution Restrictions forums post Signing code with a hardware-based code-signing identity forums post New Capabilities Request Tab in Certificates, Identifiers & Profiles forums post Isolating Code Signing Problems from Build Problems forums post Investigating Third-Party IDE Code-Signing Problems forums post Determining if an entitlement is real forums post Code Signing Identifiers Explained forums post Mac code signing: Forums tag: Developer ID Creating distribution-signed code for macOS documentation Packaging Mac software for distribution documentation Placing Content in a Bundle documentation Embedding nonstandard code structures in a bundle documentation Embedding a command-line tool in a sandboxed app documentation Signing a daemon with a restricted entitlement documentation Defining launch environment and library constraints documentation WWDC 2023 Session 10266 Protect your Mac app with environment constraints TN2206 macOS Code Signing In Depth archived technote — This doc has mostly been replaced by the other resources linked to here but it still contains a few unique tidbits and it’s a great historical reference. Manual Code Signing Example forums post The Care and Feeding of Developer ID forums post TestFlight, Provisioning Profiles, and the Mac App Store forums post For problems with notarisation, see Notarisation Resources. For problems with the trusted execution system, including Gatekeeper, see Trusted Execution Resources. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

I have a team I was added to for development XCode refuses to do it's job. It literally only displays 3 teams, and it refuses to acknowledge the fact that it's missing one of the development teams I am on. All I want to do is test this damn app. I have tried the following: Signing out and back in Clearing the cache at ~/Library/Caches/com.dt.XCode or whatever Clearing the cache at ~/Library/Support/XCode or whatever I really can't be bothered to remember, seeing as how they didn't matter I have tried searching high and low, manually installing certificates, I nuked my keychain after logging out and then restarted, logged back in, STILL NOTHING. I genuinely don't know what to do, and it's so frustrating because this is like, an issue I should have in 2005, not in 2025. Syncing a team from an account should not be something I have to search high and low for, find no answers, and then end up here, posting, when it's literally a GET/POST request. If I am doing something wrong, lord knows what it is. I can sign my other apps no problem.

Hi folks, I'm trying to generate a provisioning profile that includes both Healthkit and MusicKit entitlements. The healthKit pieces if fine, and included in the profile. However, despite selecting Musickit under services in the ID setup, the entitlement doesn't seem to be included in the profile. Other steps taken: Setup the app in App Store Connect, generated a media ID and Key. Tried both automatic and manual signing. Are there specifics tricks to getting this one to work?

Hello Engineers My app was rejected with the message below, BUT I don't have this entitlements in my project! I already removed all Xcode files under ${HOME}/Developer/Xcode, but the problem still alive! Guideline 2.4.5(i) - Performance In order to continue reviewing your app, we require additional information. Your app uses one or more entitlements which do not appear to have matching functionality within the app. Please reply to this message in App Store Connect and describe how and where the app uses the following entitlements. You will not need to upload a new binary to provide this information. Apps should have only the minimum set of entitlements necessary for the app to function properly. If there are entitlements that are not needed, please remove them and submit an updated binary. You will need to Developer Reject the app to upload an updated version. "com.apple.security.assets.pictures.read-write" "com.apple.security.assets.movies.read-write" "com.apple.security.assets.music.read-write" "com.apple.security.files.downloads.read-write" Here my entitlements: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>com.apple.security.app-sandbox</key> <true/> <key>com.apple.security.application-groups</key> <array> <string>group.org.eof.apps</string> </array> <key>com.apple.security.files.user-selected.read-write</key> <true/> </dict> </plist> code-block Who or where are these entitlements inserted? Which button should be clicked to deactivate them? Link to my project: DRFXBuilder Regards

This is a lengthy one. I have basically compiled a Rust binary into a dylib and packaged into a .xcframework that contains per arch .frameworks. This loads correctly when run from Xcode into a real iOS device. However, when deployed to TestFlight the app crashes. Here is what is a bit different, the dylib is not fully self-contained. It tries to reach in an use C functions I have exposed in my library code. Calling functions that are just within the dylib and just return works fine, but the moment it tries to call one of the exposed functions it crashes. A full in-depth step by step of how I packaged the binaries can be found in my website: https://ospfranco.com/complete-guide-to-dylibs-in-ios-and-android When I look at the TestFlight crash report there are no symbols but the termination cause via WatchDog is: Termination Reason: CODESIGNING 2 Invalid Page I have declared my functions as such: OBJC_EXTERN void ios_prepare_request(const char *url) #define EXPORT __attribute__((visibility("default"), used, retain)) extern "C" { EXPORT void ios_prepare_request(const char *url) { NSString *urlString = [NSString stringWithUTF8String:url]; request = [NSMutableURLRequest requestWithURL:[NSURL URLWithString:urlString]]; } } // Function used to prevent optimization void force_symbol_registration() { // Force these symbols to be included in the binary by referencing them volatile void *ptrs[] = {(void *)ios_prepare_request,}; // Prevent compiler from optimizing away the array (void)ptrs; } And I load my framework as: opacity::force_symbol_registration(); // NSBundle *dylib_bundle = // [NSBundle bundleWithIdentifier:@"com.opacitylabs.sdk"]; // NSString *dylib_path = [dylib_bundle pathForResource:@"sdk" ofType:@""]; // // Load the dynamic library // void *handle = dlopen([dylib_path UTF8String], RTLD_NOW | RTLD_GLOBAL); // if (!handle) { // NSString *errorMessage = [NSString stringWithUTF8String:dlerror()]; // *error = // [NSError errorWithDomain:@"OpacitySDKDylibError" // code:1002 // userInfo:@{NSLocalizedDescriptionKey : // errorMessage}]; // return -1; // or appropriate error code // } // Make sure the main executable's symbols are available dlopen(NULL, RTLD_NOW | RTLD_GLOBAL); NSBundle *frameworkBundle = [NSBundle bundleWithIdentifier:@"com.opacitylabs.sdk"]; if (![frameworkBundle isLoaded]) { BOOL success = [frameworkBundle load]; if (!success) { NSString *errorMessage = @"Failed to load framework"; *error = [NSError errorWithDomain:@"OpacitySDKDylibError" code:1002 userInfo:@{NSLocalizedDescriptionKey : errorMessage}]; return -1; } } As you can see, I have also tried dlopen both work when run from Xcode but crash when deployed on testflight. I have tried re-signing the xcframework/frameworks on a pre build step but it doesn't work As stated, I can call the functions inside the dylib, but once they try to call my exposed code it crashes Is this achievable at all or just a limitation of the iOS sandbox?

Hi everyone, I'm working with a third party to integrate their USB driver into our app and I'm wondering if iPadOS supports bundling a prebuilt .systemextension file with the entitlement com.apple.developer.system-extension.redistributable into our app that has the com.apple.developer.driverkit.communicates-with-drivers entitlement? If not, is there a way to bundle a third party USB driver into our iPad app?

I am building an application using .NET and Avalonia UI. The application is cross-platform. One of the tasks of the application is to coordinate data collection that is then routed into a Docker container for analysis. Everything works as expected in Windows. Everything works as expected in macOS on the development workstation and before packaging. After I package/codesign into a hardened runtime, I start seeing crashes at the moment when I try to execute the system calls to Docker. I am reasonably confident that this has something to do with an entitlement flag or some other permissions issue. I have been trying to sort this on my own for a while. I am only hoping someone can nudge me in the right direction. Thanks, Kevin

Hi, My understanding from this information: " https://developer.apple.com/support/certificates/ iOS Distribution Certificate (in-house, internal-use apps) Users will no longer be able to run apps that have been signed with this certificate. You must distribute a new version of your app that is signed with a new certificate. " is that even if I re-sign the app with a new Provisioning Profile based on a new Distribution Certificate the apps will stop working. I need to re-build my apps with a new Distribution certificate+Provisioning profile, when distributing in-house, right? I can see that the apps continue to function when I re-sign them with a new Provisioning Profile, but according to the information above they will stop working the day (day after) the Distribution certificate they were built with expires. /Rikard

IMPORTANT The underlying issue here (FB8830007) was fixed in macOS 11.3, so the advice in this post is irrelevant if you’re building on that release or later. Note This content is a repost of info from another thread because that thread is not world readable (it’s tied to the DTK programme). A number of folks have reported problems where: They have a product that supports older versions of macOS (anything prior to 10.11). If they build their product on Intel, everything works. If they build their product on Apple Silicon, it fails on those older versions of macOS. A developer filed a bug about this (FB8830007) and, based on the diagnosis of that bug, I have some info to share as to what’s going wrong and how you can prevent it. Let’s start with some background. macOS’s code signing architecture supports two different hash formats: sha1, the original hash format, which is now deprecated sha256, the new format, support for which was added in macOS 10.11 codesign should choose the signing format based on the deployment target: If your deployment target is 10.11 or later, you get sha256. If your deployment target is earlier, you get both sha1 and sha256. This problem crops up because, when building for both Intel and Apple Silicon, your deployment targets are different. You might set the deployment target to 10.9 but, on Apple Silicon, that’s raised to the minimum Apple Silicon system, 11.0. So, which deployment target does it choose? Well, the full answer to that is complex but the executive summary is that it chooses the deployment target of the current architecture, that is, Intel if you’re building on Intel and Apple Silicon if you’re building on Apple Silicon. For example: intel% codesign -d --arch x86_64 -vvv Test664892.app … Hash choices=sha1,sha256 … intel% codesign -d --arch arm64 -vvv Test664892.app … Hash choices=sha1,sha256 … arm% codesign -d --arch x86_64 -vvv Test664892.app … Hash choices=sha256 … arm% codesign -d --arch arm64 -vvv Test664892.app … Hash choices=sha256 … The upshot is that you have problems if your deployment target is less than 10.11 and you sign on Apple Silicon. When you run on, say, macOS 10.10, the system looks for a sha1 hash, doesn’t find it, and complains. The workaround is to supply the --digest-algorithm=sha1,sha256, which overrides the hash choice logic in codesign and causes it to include both hashes: arm% codesign -s - --digest-algorithm=sha1,sha256 Test664892.app arm% codesign -d --arch x86_64 -vvv Test664892.app … Hash choices=sha1,sha256 … % codesign -d --arch arm64 -vvv Test664892.app … Hash choices=sha1,sha256 … Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

Two months ago we got approval for using the Notification Filtering entitlement. We rushed out to implement it in our app, only to find out that the permission was set for the wrong bundle identifier. We expected to get the permission for the notification extension's bundle identifier, yet it is added for the main app's bundle identifier. Per the official docs, the entitlement permission should be in the notification service extension target: After you receive permission to use the entitlement, add com.apple.developer.usernotifications.filtering to the entitlements file in the Notification Service Extension target. However, this fails to get signed when compiling for non-simulator targets because of the bundle mismatch issue. Simulator perfectly filters notifications. Adding the entitlement to the main app does compile, but filtering does not work (as expected). We reached out to Apple twice (Case-ID: 14330583) but we have yet to receive any response. Could there be something else wrong instead of the identifier mismatch?

Starting a few hours ago (roughly 2:45PM Eastern time) we began experiencing elevated latency with the Developer ID Notary Service. There is nothing listed on the developer system status page about degraded performance or a service outage. Operations that usually take ~15 minutes, are stacking up for hours. The oldest pending entry we have was created at 2:45PM Eastern: createdDate: 2025-06-24T18:45:22.539Z id: 5209a4d2-eae4-4714-aa8e-6961677ff2e We currently have 27 pending builds in the notary service since we are required to notarize internal builds to ensure we satisfy our requirements so this is creating an issue for us.

I made a macOS application using Swift Package and distributed it in dmg format through Apple Notary service. However, we received a report from a user that it can be launched from a disk image mounted from dmg, but when copied to /Applications, the app is broken and does not start. I looked into why this happened, I noticed that the codesign command returned different results when copying the application bundle and /Applications on the volume mounted dmg with Finder. Mounted dmg: OK ❯ codesign --verify --deep --verbose /Volumes/azoo-key-skkserv/azoo-key-skkserv.app /Volumes/azoo-key-skkserv/azoo-key-skkserv.app: valid on disk /Volumes/azoo-key-skkserv/azoo-key-skkserv.app: satisfies its Designated Requirement Copied by Finder: Bad codesign reports that there are 148 added/missing files. ❯ codesign --verify --deep --verbose /Applications/azoo-key-skkserv.app /Applications/azoo-key-skkserv.app: a sealed resource is missing or invalid file added: /Applications/azoo-key-skkserv.app/Contents/Resources/AzooKeyKanakanjiConverter_KanaKanjiConverterModuleWithDefaultDictionary.bundle/Contents/Resources/Dictionary/louds/グ1.loudstxt3 (skip...) file missing: /Applications/azoo-key-skkserv.app/Contents/Resources/AzooKeyKanakanjiConverter_KanaKanjiConverterModuleWithDefaultDictionary.bundle/Contents/Resources/Dictionary/louds/グ1.loudstxt3 (skip...) Copied by ditto: OK ❯ ditto /Volumes/azoo-key-skkserv/azoo-key-skkserv.app /Applications/azoo-key-skkserv.app ❯ codesign --verify --deep --verbose /Applications/azoo-key-skkserv.app /Applications/azoo-key-skkserv.app: valid on disk /Applications/azoo-key-skkserv.app: satisfies its Designated Requirement I made a simple macOS application to explain this problem in an easy-to-understand way. You can download dmg in github releases, mount dmg, copy it in the Finder, and check if there is a problem by running the codesign command. https://github.com/mtgto/example-utf8-mac-notarization As a result, I learned the following two things. Occurs only with resources with file names whose values change due to NFC/NFD normalization No problems occur with the resources of the application itself. Generated by the Swift Package resources that the application depends on I think this is a problem with Finder or Gatekeeper.

This math-educational 3D-graphics courseware utilizes Java3D, which sits on top of hardware-dependent JOGAMP binaries (which instruct at the GPU-level). This code signing command applied to the installer .dmg: codesign -s "myName" --force --options runtime ~/DFG2D_MacOS_Manufacturing/MacOSInstallers/DFG2D_Mac_J1602_x86/DataflowGeometry2D-1.0.300.dmg is supposed to force signing of all the embedded binaries, BUT the notary tool finds about 25 jogamp-fat dynamic libraries (/ *.dylib) UNSIGNED. Processing complete id: 23d81a99-4087-48d2-a567-8072dd2820fe status: Invalid pierrebierre@Pierres-iMac ~ % xcrun notarytool log 17d2fe94-f38a-47d4-9568-cf4dc65f24c9 --apple-id "xxxxxxxxxxx" --team-id "XXXXXXXXX" --password pwpwpwpwpw { "logFormatVersion": 1, "jobId": "17d2fe94-f38a-47d4-9568-cf4dc65f24c9", "status": "Invalid", "statusSummary": "Archive contains critical validation errors", "statusCode": 4000, "archiveFilename": "DataflowGeometry2D-1.0.300.dmg", "uploadDate": "2025-07-13T21:28:21.147Z", "sha256": "57320c4ad4a07f144336084152bf7e3328f8c5694dd568d2cfd23a596b5b3b13", "ticketContents": null, "issues": [ { "severity": "error", "code": null, "path": "DataflowGeometry2D-1.0.300.dmg/DataflowGeometry2D.app/Contents/app/DFG2D_Mac_x86_300.jar/lib/jogamp-fat/jogamp-fat.jar/natives/macosx-universal/libnativewindow_awt.dylib", "message": "The binary is not signed.", "docUrl": "https://developer.apple.com/documentation/security/notarizing_macos_software_before_distribution/resolving_common_notarization_issues#3087721", "architecture": "x86_64" }, { "severity": "error", "code": null, "path": "DataflowGeometry2D-1.0.300.dmg/DataflowGeometry2D.app/Contents/app/DFG2D_Mac_x86_300.jar/lib/jogamp-fat/jogamp-fat.jar/natives/macosx-universal/libnativewindow_awt.dylib", "message": "The signature does not include a secure timestamp.", "docUrl": "https://developer.apple.com/documentation/security/notarizing_macos_software_before_distribution/resolving_common_notarization_issues#3087733", "architecture": "x86_64" }, What is your advice on how to get these binaries signed?

Greetings! I've notarized my app but it spends always over 1 hour. I think it's because the app size is about 30GB, but is there any way to reduce it?

productsign Command Appears to Succeed but Package has No Valid Signature Category: Security, macOS, Code Signing Question: productsign command, when signing a PKG created with productbuild, appears to succeed with a success message (Wrote signed product archive to ...) but spctl verification results in rejected, source=no usable signature, indicating that the signature was not actually applied. Details: Goal: To sign a distribution package created with productbuild using a Developer ID Installer certificate. Certificate Used: Developer ID Installer: [Company Name] ([Team ID]) This certificate was issued by Previous Sub-CA and is not the latest G2 Sub-CA recommended by Apple. We cannot create a new G2 Sub-CA certificate as we have reached the limit of 5. productsign Command: productsign --sign "Developer ID Installer: [Company Name] ([Team ID])" [input.pkg] [output.pkg] productsign Output: Wrote signed product archive to [output.pkg] (Appears as a success message). spctl Signature Verification: spctl -a -vv [output.pkg] Result: rejected, source=no usable signature Notarization Service Results (Behavioral difference between Macs): On Mac A, the submission status was Accepted. On Mac B, the status was Invalid, with the notarization log message being The binary is not signed.. Troubleshooting Steps Taken: We attempted to sign both component and distribution packages with productsign, and in both cases, the signature was not recognized by the system. We skipped productsign and relied on the notarization service's auto-signing, but the notarization log still reported The binary is not signed., and the notarization failed. We have confirmed that the certificate and private key are properly associated in Keychain Access. My Questions: Given that we are using an older Previous Sub-CA certificate and cannot create a new one, why does productsign appear to succeed when the signature is not being applied? What could cause the behavioral difference where notarization is Accepted on Mac A but Invalid on Mac B? Is this a known issue with Apple's tools, or is it possibly caused by the specific structure of our PKG? What is the recommended workflow or debugging method to successfully sign and notarize a PKG under these circumstances? Thank you for your assistance

Hello, I'm encountering an issue when trying to build and launch a Flutter app on a physical iOS device using Android Studio. Here is the full log: `Launching lib/main.dart on （iPhone Name） in debug mode... Automatically signing iOS for device deployment using specified development team in Xcode project: （Project ID） Running Xcode build... Xcode build done. 19.7s Failed to build iOS app Could not build the precompiled application for the device. Error (Xcode): Target debug_unpack_ios failed: Exception: Failed to codesign （Project Names）/build/ios/Debug-iphoneos/Flutter.framework/Flutter with identity （identity ID）. Error launching application on （iPhone Name）.` This only happens when using Android Studio. When I build the same project using Xcode, it runs fine on the same device. Background: I accidentally deleted all Apple accounts from Xcode recently. In Keychain Access, I had three identical certificates; I deleted the older two and kept the newest one. I suspect this may be related to provisioning or code signing, but I’m not sure how to resolve it within Android Studio. Any advice or steps to fix this would be greatly appreciated. Thanks in advance!

Can you please help us with the scenario below, including details and Apple’s recommendations? I've already read through the Notarization and Gatekeeper documentation. The installed version of our application is 1.2.3, located in /Applications/XYZSecurity.app. We created an upgrade package for version 1.2.4. As part of the pre-install script in the 1.2.4 installer, we explicitly deleted some obsolete .dylib files from /Applications/XYZSecurity.app/Contents/Frameworks and some executable files from /Applications/XYZSecurity.app/Contents/MacOS that were no longer needed in version 1.2.4. The installation of version 1.2.4 completed successfully, but we see the below error logs in installer.log: PackageKit: Failed to unlinkat file reference /Applications/XYZSecurity.app/Contents/Frameworks/libhelper.dylib PackageKit: Failed to unlinkat file reference /Applications/XYZSecurity.app/Contents/MacOS/helper-tool Our Key Questions: Is it the right practice to remove obsolete files in the pre-install script during an upgrade? Is this approach recommended by Apple? Can this cause any issues with Apple Gatekeeper? Is there a possibility of my application getting blocked by Gatekeeper as a result?

I spent 20 minutes trying to figure out why codesigning was failing -- I had the pf block set up correctly, my keychains were unlocked, and then, eventually, it occurred to me, hey, maybe an IP address changed, so I disabled IPv6 except for link local, and then amazingly, it went back to working. I filed FB13706261 over a year ago. This is ridiculous.

I tried to create a new IOS provisioning profile and re-apply it to the app using Xcode to build it, but I got into trouble. The build is good, but it bounces when running the app. I would appreciate it if you could let me know what to do.

I am facing this error on every flutter project build. Although it runs ok. The error happens on the codesign command What do I need to fix ? I have validated that every *.plist file is ok using plutil -lint ERROR MESSAGE /usr/bin/codesign --force --sign MY_SHA_CODE --verbose /Users/macbookair/workspace/flutter_application_1/build/ios/Release-iphoneos/Runner.app/Frameworks/libswiftCore.dylib)` exited with status 0. The command's output was: /Users/macbookair/workspace/flutter_application_1/build/ios/Release-iphoneos/Runner.app/Frameworks/libswiftCore.dylib: a required plist file or resource is malformed Info.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleDevelopmentRegion</key> <string>$(DEVELOPMENT_LANGUAGE)</string> <key>CFBundleDisplayName</key> <string>Flutter Application 1</string> <key>CFBundleExecutable</key> <string>$(EXECUTABLE_NAME)</string> <key>CFBundleIdentifier</key> <string>$(PRODUCT_BUNDLE_IDENTIFIER)</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>flutter_application_1</string> <key>CFBundlePackageType</key> <string>APPL</string> <key>CFBundleShortVersionString</key> <string>$(FLUTTER_BUILD_NAME)</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>$(FLUTTER_BUILD_NUMBER)</string> <key>LSRequiresIPhoneOS</key> <true/> <key>UILaunchStoryboardName</key> <string>LaunchScreen</string> <key>UIMainStoryboardFile</key> <string>Main</string> <key>UISupportedInterfaceOrientations</key> <array> <string>UIInterfaceOrientationPortrait</string> <string>UIInterfaceOrientationLandscapeLeft</string> <string>UIInterfaceOrientationLandscapeRight</string> </array> <key>UISupportedInterfaceOrientations~ipad</key> <array> <string>UIInterfaceOrientationPortrait</string> <string>UIInterfaceOrientationPortraitUpsideDown</string> <string>UIInterfaceOrientationLandscapeLeft</string> <string>UIInterfaceOrientationLandscapeRight</string> </array> <key>CADisableMinimumFrameDurationOnPhone</key> <true/> <key>UIApplicationSupportsIndirectInputEvents</key> <true/></dict> </plist> Please help.

I'm posting this here after reading Quinn's post here: https://developer.apple.com/forums/thread/799000 The above entitlement is mentioned in IOUSBHostControllerInterface.h. It isn't an entitlement one can add using the + button on the Capabilities panel in Xcode. If I try to add it by hand, Xcode complains that it isn't in my profile. Is this a managed entitlement? We'd like to create a local USB "device" to represent a real device reachable over a network.