I created a distribution certificate for my app release build and have manually loaded this cert (link to xcode image at the bottom of this paragraph). All things look good until I build the app and I get the following error. I'm first pasting the image of my project and then the error information. [https://madshot.net/10c6e510875e.png) Could not launch “Madshot360” Domain: IDELaunchErrorDomain Code: 20 Recovery Suggestion: Runningboard has returned error 5. Please check the system logs for the underlying cause of the error. User Info: { DVTErrorCreationDateKey = "2025-06-10 19:58:02 +0000"; DVTRadarComponentKey = 968756; IDERunOperationFailingWorker = IDELaunchServicesLauncher; } The operation couldn’t be completed. Launch failed. Domain: RBSRequestErrorDomain Code: 5 Failure Reason: Launch failed. Launchd job spawn failed Domain: NSPOSIXErrorDomain Code: 153 Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "00008112-0004052C22D8A01E"; "device_model" = "Mac14,15"; "device_osBuild" = "15.5 (24F74)"; "device_platform" = "com.apple.platform.macosx"; "device_thinningType" = "Mac14,15"; "dvt_coredevice_version" = "443.19"; "dvt_coresimulator_version" = "1010.10"; "dvt_mobiledevice_version" = "1784.120.3"; "launchSession_schemeCommand" = Run; "launchSession_state" = 1; "launchSession_targetArch" = arm64; "operation_duration_ms" = 235; "operation_errorCode" = 20; "operation_errorDomain" = IDELaunchErrorDomain; "operation_errorWorker" = IDELaunchServicesLauncher; "operation_name" = IDERunOperationWorkerGroup; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.macosx"; "param_diag_113575882_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_mtc_enable" = 1; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 99; "param_launcher_substyle" = 0; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_structuredConsoleMode" = 1; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "macosx15.4"; "sdk_osVersion" = "15.4"; "sdk_variant" = macos; } System Information macOS Version 15.5 (Build 24F74) Xcode 16.3 (23785) (Build 16E140) Timestamp: 2025-06-10T12:58:02-07:00

I am distributing a macOS application outside the App Store using Developer ID and need to provide provisioning profiles to customers for installation during the package installation process. I have two questions: How can I package and provide the provisioning profile(s) so that the customer can install them easily during the application installation process? Are there any best practices or tools that could simplify this step? In my case, there are multiple provisioning profiles. Should I instruct the customer to install each profile one by one, or is there a way to combine them and have them installed all at once? Any insights, resources, or recommendations would be greatly appreciated.

I am distributing a macOS application outside the App Store using Developer ID and need to provide provisioning profiles to customers for installation during the package installation process. I have two questions: How can I package and provide the provisioning profile(s) so that the customer can install them easily during the application installation process? Are there any best practices or tools that could simplify this step? In my case, there are multiple provisioning profiles. Should I instruct the customer to install each profile individually, or is there a way to combine them and have them installed all at once? Any guidance on the best practices for this process would be greatly appreciated.

Hello everyone. I have a simple doubt, I receive an email informing that the Apple Distribution certificate will expire. I create one new in the Developer portal with one year duration. My doubt is, I need to do something more like open again the app in Xcode, insert new certificate and build it again, send to apple and everything? Or just creating this certification is enough? Is possible to increase this certification time or auto renew? Thank you!!!

Hello Apple Developer Support, We are experiencing an issue when programmatically installing a trusted root certificate on EC2 macOS instances (ARM-based), running the latest version of macOS 14.7.5 (Build 23H527). We are using the following command as part of our automated setup process: sudo security authorizationdb write com.apple.trust-settings.admin allow sudo security add-trusted-cert -d -r trustRoot -k /Library/Keychains/System.keychain "$CERT_NAME" sudo security authorizationdb remove com.apple.trust-settings.admin This fails with the following message: SecTrustSettingsSetTrustSettings: The authorization was denied since no user interaction was possible In the past, as sugested in other posts (https://developer.apple.com/forums/thread/671582) we were able to bypass this issue by running: sudo security authorizationdb write com.apple.trust-settings.admin allow This worked successfully in prior versions, including earlier 14.x releases, and continues to work on Intel-based macOS instances. However, in macOS 14.7.5 (on ARM), this approach no longer works. We suspect this may be due to a change in how System Integrity Protection (SIP) is enforced, especially on EC2 ARM. Questions: Has Apple introduced any changes in macOS 14.7.5 that prevent modifying trust settings via security CLI on headless or non-interactive sessions? Is there an approved or documented way to install system-level trusted certificates programmatically on macOS 14.7.5 (ARM)? Are there alternatives for setting trustRoot certs in non-GUI environments, such as virtualized or cloud-hosted macOS instances? As further information we were thinking to use MDM Profiles but looks like it is also blocked Thanks

I have tried again and again to generate and install the .mobileprovision on my device for testing apps following the exact instructions. I cannot get this to work. When I tap the .mobileprovision on the device I get the error "Profile Error - This profile cannot be installed." In Xcode in the console as I try to install the profile, this is what it shows: `profiled (ManagedConfiguration) Desc : Invalid Profile US Desc: Invalid Profile Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError and then profiled Desc : Invalid Profile Sugg : Invalid Profile US Desc: Invalid Profile US Sugg: Invalid Profile Domain : MCInstallationErrorDomain Code : 4000 Type : MCFatalError ...Underlying error: NSError: Desc : Invalid Profile US Desc: Invalid Profile Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError I have been at this for days and cannot get it to work. Any help would be appreciated

In the past it was relatively easy to download from the developer portal both the app signing and installer signing certs so that I could sign AppleScripts from Script Editor when exporting them and when building packages in Jamf Composer. I went to set that up today and it seems things have changed in the last few years since I've had to set this up. I've been unable to sort this out and would love some help. I'm looking for a tutorial on doing this that walks someone step-by-step through the process for obtaining the certs (yes, I have dev account) and setting them up in keychain and then making use of them. Thanks!

To learn how to develop/distribute a DriverKit driver (DEXT) and a UserClient app correctly, I am trying to run the following sample dext and app. https://developer.apple.com/documentation/driverkit/communicating-between-a-driverkit-extension-and-a-client-app?language=objc I walked throught steps in README.md included in the project and faced issues. First, I referred the "Configure the Sample Code Project" section in the README.md and configured the sample code project to build with automatic signing. I could run the app and activate the dext successfully and made sure the app could communicate with the dext. Next, I tried the manual signing. I followed steps described in the "Configure the Sample Code Project" section carefully. The following entitlements has already been assigned to my team account. DriverKit Allow Any UserClient Access DriverKit USB Transport - VendorID DriverKit I could build both app and dext and could run the app. However, when I clicked the "Install Dext" button to activate the dext, I got the following error: sysex didFailWithError: extension category returned error Am I missing something? I would also like to know detailed steps to publicly distribute my dext and app using our Developer ID Application Certificate, as README.md only shows how to configure the project for development. Xcode version: 16.3 (16E140) Development OS: macOS 15.5 (24F74) Target OS: macOS 15.5 (24F74)

I have a macOS application that was previously distributed under my personal Apple Developer account using a Developer ID certificate. We’ve recently transitioned distribution to our company’s Apple Developer account. The app’s bundle identifier has been successfully transferred, and I’ve signed a new build of the app using the company’s Developer ID certificate. The app installs and runs correctly under the new signature. However, I’ve encountered a problem: the app is no longer able to access previously granted permissions (e.g., Screen Recording, System Audio Recording, and Input Monitoring). Furthermore, it cannot re-prompt for these permissions because they appear as already granted in System Settings. From what I understand, this issue is due to the change in the code signing identity. Specifically, the designated requirements used by macOS to identify an app have changed, so the system no longer associates the new version of the app with the previously granted permissions (as outlined in Apple's Technical Note TN3127). The only workaround I’ve found so far is to manually reset the app's permissions using Terminal commands (e.g., tccutil reset), but this is not something we can reasonably ask end users to do. Question: Is there a recommended or supported approach to either preserve permissions when changing Developer ID identities, or programmatically trigger a permissions reset for existing users? We're looking for a seamless solution that doesn't degrade user experience.

Hi everyone, I'm following up on this post I made earlier about an issue I'm having with FamilyControls and the DeviceActivityMonitor extension not working for external TestFlight testers. To briefly recap: I have official Apple approval for the com.apple.developer.family-controls entitlement (distribution) The entitlement is added to both my main app and the DeviceActivityMonitor extension The App Group is correctly configured for both targets On internal TestFlight builds, everything works as expected: app blocking works, the extension runs, and selected apps are shielded. On external TestFlight builds, users get the Screen Time permission prompt, can select apps to block, but nothing is blocked. Since that post, I submitted a Code Level Support request, and Apple asked me to file a bug report via Feedback Assistant. I did that almost a month ago. The only reply I’ve received since is that they can’t give a timeframe or guarantee it will be resolved. I'm stuck in limbo with no updates and no fix. This feature is critical to my app and I cannot launch without it. I’ve reached out to other developers who use app blocking, and none of them have run into this issue. My setup seems correct, and Apple has not said otherwise. If anyone has experienced something similar, found a workaround, or knows how to get real movement on a bug report like this, I would really appreciate any help. It’s been weeks, and I just want to launch my app. Thanks so much.

Hello, In our Account we have an iOS app with an explicit identifier "ABC123.com.some.app" that is using non-team prefix which is DEF456. It has also explicit identifiers for Widgets bundle and Notification Service. Due to non-team prefix, it can't access e.g. shared keychain and data put there by our other apps. Since we are working on features that require these capabilities, we would like to update the app identifier, so it is prefixed with our team id DEF456. Initially, we thought that the process would require steps like: Create new app, team-prefixed identifier(s) for app and all things that need them Recreate the provisioning profiles with new App Identifier Roll out the app using with new profiles via App Store but when trying to create the new identifier with com.some.app and team id prefix DEF456 we are getting following error: An App ID with Identifier com.some.app is not available. Please enter a different string. Can anybody advise us how to correctly perform such change and what steps are required from our end? We would like to keep our existing App Store entry, ratings and smoothly switch users. We are aware that this kind of migration results in loss of Keychain access. Thanks for any advice on that!

Hi the best community! When I try to submit the app to Testflight I receive the following error: "codesign command failed (/var/folders/j9/yh_rkh114rbgvmglf4gycj8w0000gn/T/XcodeDistPipeline.~~~OW0Dwk/Root/Payload/Application.app/Frameworks/Alamofire.framework: replacing existing signature /var/folders/j9/yh_rkh114rbgvmglf4gycj8w0000gn/T/XcodeDistPipeline.~~~OW0Dwk/Root/Payload/Application.app/Frameworks/Alamofire.framework: invalid or corrupted code requirement(s) Requirement syntax error(s): line 1:155: unexpected token: NPH )" I have never stuck with this issue before. Xcode Version 16.0 I assume that there is something related to code signing and our company name in App Store connect: Medical Institution “NPH” (The company name has been anonymized for privacy purposes.) Appreciate any help. Thank you!

I am trying to distribute my Unity app to test flight. Build works on iPhone locally, archiving also works but when I start distribution to test flight I get this Error codesign command failed (/var/folders/gn/ql1bht8j2z7b18b3xtt0j7rr0000gn/T/XcodeDistPipeline.~~~2gmyFJ/Root/Payload/TondoJigsaw2.app/Frameworks/UnityFramework.framework: replacing existing signature /var/folders/gn/ql1bht8j2z7b18b3xtt0j7rr0000gn/T/XcodeDistPipeline.~~~2gmyFJ/Root/Payload/TondoJigsaw2.app/Frameworks/UnityFramework.framework: invalid or corrupted code requirement(s) Requirement syntax error(s): line 1:152: unexpected token: sQuaricon ) I am not sure what is the problem Team name is: “sQuaricon” Name Surname s.p. Bundle ID is: com.Squaricon.TondoJigsaw2 When I change bundle ID to com.testasd.TondoJigsaw2 (I do this in Xcode before archiving) that error disappears and I reach the part where I have to pick language. Even though this is not the solution, I think it is interesting, it implies issue might be with Bundle ID but this bundle ID is correct. I am using "automatically manage signing", I did not create any provisioning profile or certificate manually.