Since I updated my iPhone 13 to this new update I have two problems First: the battery discharges too fast or it gets stuck and doesn't discharge until I turn it off and turn it back on. Second: I see in my screen time a page that I had never seen is called imasdk.googleapis.com which I had never occupied and they tell me that it is a failure of the new update I hope you can help me fix that, since this mobile phone is new and already brings the faults by the ios

I have an iOS/iPadOS app and 'm trying to communicate with usb smart card reader using CryptoTokenKit on all platforms (ios/ipados/macos). Minimal Repro Code import CryptoTokenKit import SwiftUI struct ContentView: View { @State var status = "" var body: some View { VStack { Text("Status: \(status)") } .padding() .onAppear { let manager = TKSmartCardSlotManager.default if manager != nil { status = "Initialized" } else { status = "Unsupported" } } } } And my entitlement file has only one key: com.apple.security.smartcard = YES Behavior • iPadOS (on device): status = "Initialized" ✅ • macOS (native macOS app, with the required CryptoTokenKit entitlement): status = "Initialized" ✅ • macOS (Designed for iPad, regardless of CryptoTokenKit entitlement): status = "Unsupported" → TKSmartCardSlotManager.default is nil ❌ Expectation Given that the same iPadOS build initializes TKSmartCardSlotManager, I expected the iPad app running in Designed for iPad mode on Apple silicon Mac to behave the same (or to have a documented limitation). Questions Is CryptoTokenKit (and specifically TKSmartCardSlotManager) supported for iPad apps running on Mac in Designed for iPad mode? If support exists, what entitlements / capabilities are required for USB smart-card access in this configuration? If not supported, is Mac Catalyst the correct/only path on macOS to access USB smart-card readers via CryptoTokenKit? Are there recommended alternatives for iPad apps on Mac (Designed for iPad) to communicate with USB smart-card readers (e.g., ExternalAccessory, DriverKit, etc.), or is this scenario intentionally unsupported? Thanks!

I have poked around the web looking for a good example to do this and I haven't found a working example. I need to connect to a USB Device, its multiple ports and supports what looks to be a root port and 4 other ports I am no expert in USB but I do know how to write a kext and client drivers, but thats really not the way to solve this. I need to display the serialized output from these USB ports for a development board. I would rather do this on my Mac than have to cobble up a Linux machine and mess around with Linux. Here is the output from ioreg MCHP-Debug@03100000 <class IOUSBHostDevice, id 0x105f6fdc2, registered, matched, active, busy 0 (20 ms), retain 27> MCHP-Debug@0 <class IOUSBHostInterface, id 0x105f6fdc8, registered, matched, active, busy 0 (13 ms), retain 5> +-o MCHP-Debug@0 <class IOUSBHostInterface, id 0x105f6fdc8, registered, matched, active, busy 0 (13 ms), retain 5> +-o MCHP-Debug@1 <class IOUSBHostInterface, id 0x105f6fdc9, registered, matched, active, busy 0 (11 ms), retain 5> +-o MCHP-Debug@2 <class IOUSBHostInterface, id 0x105f6fdcb, registered, matched, active, busy 0 (9 ms), retain 5> | | | | | +-o MCHP-Debug@3 <class IOUSBHostInterface, id 0x105f6fdcc, registered, matched, active, busy 0 (7 ms), retain 5> I have been able to open a inservice to the device at the top level, but I get an error when I use. usbHostInterface = [[IOUSBHostInterface alloc] initWithIOService:usbDevice options: IOUSBHostObjectInitOptionsNone queue: queue error: &error interestHandler: handler]; Error:Failed to create IOUSBHostInterface. with reason: Unable to obtain configuration descriptor. Assertion failed: (usbHostInterface), function main, file main.m, line 87. I started using DeviceKit but I received signing errors and I shouldn't have to go down that path just to dump data from a USB port? Any suggestions would be great, most of the Apple documentation on USB ports is like 20 years old and the new stuff pushes you towards DeviceKit.

Hello, We are developing an iAP2 accessory and encountering an issue during the Identification phase. Issue: Authentication: ✅ Successful Identification: ❌ IdentificationInformation rejected (0x1D03) Product Plan Status: "Submitted" (in MFi Portal) What we've verified: ProductPlanUID matches MFi Portal All required parameters per R43 Table 101-9 are included Parameters are in ascending order by ID Message format appears correct Observation: iPhone accepts the message format but still rejects IdentificationInformation, suggesting the issue may be related to Product Plan configuration or status rather than parameter format. Questions: Can a Product Plan with status "Submitted" complete iAP2 identification, or does it need to be "Approved"? Are there any Product Plan configuration requirements that might not be visible in MFi Portal? Should we configure "Control Message Lists" in Product Plan? (We don't see this option in Portal) We can provide additional technical details through secure channels if needed. Thank you for your assistance.

Are there some undocumented (or, well, documented, but overlooked by me) prerequisites to the readValueWithCompletionHandler: method? The reason I ask is that occasionally I am getting the Read/Write operation failed error in the callback, even in cases where direct, non-deferred reading of the value worked properly. It seems to happen very consistently with some accessories and characteristics, not randomly; thus, it is not likely a temporary quirk in the communication with the device. Probably I am overlooking something of importance, but it does not make a good sense to me. My code (is it right, or can you see anything wrong in there?) // in an HMCharacteristic category if ([self.properties containsObject:HMCharacteristicPropertyReadable]) { id val=self.value, ident=[NSString stringWithFormat:@" [%@] %@ (%@)", self.uniqueIdentifier, self.localizedDescription, self.service.accessory.name]; NSLog(@"nondeferred '%@'%@", val, ident); if (self.service.accessory.reachable) { [self readValueWithCompletionHandler:^(NSError * _Nullable error) { if (error) NSLog(@"deferred ERROR %@ -> %@", ident, error); else NSLog(@"deferred '%@'%@", self.value, ident); }]; } } for most accessories/characteristics works properly, but for some of them I am consistently getting results like nondeferred '70.5' [64998F70-9C11-502F-B8B4-E99DC5C3171B] Current Relative Humidity (Vlhkoměr TH) deferred '70.5' ERROR [64998F70-9C11-502F-B8B4-E99DC5C3171B] Current Relative Humidity (Vlhkoměr TH) -> Error Domain=HMErrorDomain Code=74 "Read/Write operation failed." UserInfo={NSLocalizedDescription=Read/Write operation failed.} Do I do something wrong in my code, or is that normal with some devices? If the latter, is there perhaps a way to know beforehand that I should not use readValueWithCompletionHandler: (for it is bound to fail anyway), and instead I should simply use self.value non-deferred? For some time it seemed to me it happens with bridged accessories, but not really, this hypothesis proved wrong by further testing. Thanks!

With the same firmware, OTA testing on the DCL test network was successful in September 2025, and the Home app was able to deliver software update notifications. Since the beginning of 2026, however, the Home app no longer delivers software update notifications. This is bug number: FB21922369

I have a BLE device which my app connects to and can detect button presses. On a button press, I want my app to start recording using the AudioRecordingIntent. But my app doesn't work and throws a background error. Is there any reliable way I can get the app to start recording audio in the background?

The FindMy device is currently MFI certified, but we plan to support UWB ranging functionality in the Find My app, similar to AirTag. After searching for relevant information, I found the relevant UWB functions in this article "Nearby-Interaction-Accessory-Protocol-Specification-Release-R4", but we need to develop third-party applications ourselves. So how can we make it display distance and direction in the "Find My" app like AirTag does?

Hello I've noticed that this product, heavily promoted on the ASC forums for many years, is no longer available from the Apple App Store. Can anyone tell me the reason why the product is no longer supported? Friends have asked me if it is 'safe' to use. Is it? Note to moderator: If I'm asking in the wrong places, please redirect my question. Thank you.

Updated version of this post My HomePod mini is now on version 16.4, so the the temperature and humidity sensors are enabled. The data properly shows up in the Home app on my various devices. In my HomeKit iPad app running on Mac Catalyst, however, the data does not show up. I would expect the HomePod mini to show up in HMHome.accessories with a service of type HMServiceTypeTempatureSensor. I see all of my other HomeKit accessories, just not the HomePod mini. I have tried with the latest Xcode (14.3) and highest available iOS Target and Minimum Deployment (16.4), macOS version 13.3. I have not, as of this writing, upgraded my HomeKit architecture, however. Note that I haven't tried the app on an actual iPad (and the iOS simulator doesn't expose my HomeKit environment.)

I am creating a barcode reader using the AVfoundation framework for iOS and IPadOS. The read result goes into payloadstringvalue, but I want to check the control characters contained in the symbol, so I am using the raw data of the description, which is a property of NSObjectProtocol inherited by VNBarcodeObservation. However, I noticed that if the length set in the raw data exceeds 26, some of the raw data in the description is omitted. So my question is, is it possible to set it so that all the raw data in the description is written out without omitting any raw data? If so, could you please tell me how to set this up? Also, if you know of any other way to extract the raw barcode data, I would appreciate it if you could let me know. Thank you.

I am using NFC when the phone is near the NFC reader times below the error： 2024-07-15 15:43:03.608427+0800 TestNFC[16022:1038141] [xpc.exceptions] <NSXPCConnection: 0x282ba90e0> connection to service with pid 58 named com.apple.nfcd.service.corenfc: Exception caught during decoding of received selector didDetectExternalReaderWithNotification:, dropping incoming message. Exception: Exception while decoding argument 0 (#2 of invocation): Exception: decodeObjectForKey: class "NFFieldNotification" not loaded or does not exist my code: #import <CoreNFC/CoreNFC.h> @interface ViewController ()<NFCTagReaderSessionDelegate> @property (strong, nonatomic) NFCTagReaderSession *session; @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view. self.view.backgroundColor = [UIColor whiteColor]; if (@available(iOS 13.0, *)) { // 初始化 NFC 设置代理 NFCTagReaderSessionDelegate if (NFCNDEFReaderSession.readingAvailable) { self.session = [[NFCTagReaderSession alloc] initWithPollingOption:NFCPollingISO14443 delegate:self queue:nil]; // NFC 显示提示信息 self.session.alertMessage = @"准备扫描，请将卡片贴近手机"; // 开启 NFC [self.session beginSession]; } } else { } } #pragma mark - NFCNDEFReaderSessionDelegate //读取失败回调-读取成功后还是会回调这个方法 - (void)tagReaderSessionDidBecomeActive:(NFCTagReaderSession *)session API_AVAILABLE(ios(13.0)){ NSLog(@"tagReaderSessionDidBecomeActive"); } - (void)tagReaderSession:(NFCTagReaderSession *)session didInvalidateWithError:(NSError *)error API_AVAILABLE(ios(13.0)){ NSLog(@"readerSession:didInvalidateWithError: (%@)", [error localizedDescription]); } - (void)tagReaderSession:(NFCTagReaderSession *)session didDetectTags:(NSArray<__kindof id<NFCTag>> *)tags API_AVAILABLE(ios(13.0)){ }

I have a 4-input, 4-output hardware device and an 8-input, 8-output virtual device, which I combine into an aggregate device. I am using the SimplyCoreAudio library to get the channel count. The code is as follows: aggregationDevice!.channels(scope: .input) =>> 12 aggregationDevice!.channels(scope: .output) =>> 12 When the program's MicrophoneMode is set to standard, the channel count is correct. However, when I set the MicrophoneMode to voiceIsolation, the channel count is incorrect: aggregationDevice!.channels(scope: .input) =>> 4 aggregationDevice!.channels(scope: .output) =>> 12 Below is the code for creating the aggregate device： func createAggregateDevice(mainDevice: AudioDevice, secondDevice: AudioDevice?, named name: String, uid: String) -> AudioDevice? { guard let mainDeviceUID = mainDevice.uid else { return nil } var deviceList: [[String: Any]] = [ [ kAudioSubDeviceUIDKey: mainDeviceUID, kAudioSubDeviceDriftCompensationKey:1 ] ] // make sure same device isn't added twice if let secondDeviceUID = secondDevice?.uid, secondDeviceUID != mainDeviceUID { deviceList.append([ kAudioSubDeviceUIDKey: secondDeviceUID, kAudioSubDeviceDriftCompensationKey:1, kAudioSubDeviceInputChannelsKey:8 ]) } let desc: [String: Any] = [ kAudioAggregateDeviceNameKey: name, kAudioAggregateDeviceUIDKey: uid, kAudioAggregateDeviceSubDeviceListKey: deviceList, kAudioAggregateDeviceMainSubDeviceKey: mainDeviceUID, kAudioAggregateDeviceIsPrivateKey:false, ] var deviceID: AudioDeviceID = 0 let error = AudioHardwareCreateAggregateDevice(desc as CFDictionary, &deviceID) guard error == noErr else { return nil } return AudioDevice.lookup(by: deviceID) } I hope someone can tell me the reason Thank you！

你好，有个问题想请教一下： 我们的app是一款与CGM实时血糖相关的app，app支持在后台通过蓝牙跟CGM血糖设备保持连接。 现在遇到一个问题： 首先，app在后台运行期间，蓝牙是开启状态的，跟CGM设备也是连接的状态。 某个时刻，监听到蓝牙的状态突然从 poweredOn 变为了 resetting ，然后蓝牙又恢复了，状态变为了 poweredOn 这时候，问题出现了：之前连接的那个CGM血糖设备一直无法扫描到了！！ 我想问一下： 什么情况下，蓝牙状态会变为resetting 蓝牙状态恢复为poweredOn后，之前连接的那个CGM血糖设备一直无法扫描到了，为什么？我要怎么做才能恢复，重新扫描到之前连接的这个设备？

Today, I submitted the following proposal to Apple through the Feedback Assistant app. I'm not confident in how I phrased it—I'd appreciate any thoughts or feedback from fellow developers. Proposal: "Apple Silicon.app" for macOS with Apple Silicon – Enhancing Performance and Swap Memory Control This suggestion has been machine translated into English, so there may be some discrepancies. If you need the actual text, please feel free to reply to this or ask at the email address below. <mail address> If the author of this proposal is to be credited, I would appreciate being listed under the nickname “DiamondGotCat,” where possible. Summary: - Currently, Apple Silicon-equipped Macs have many system-level features locked down or restricted. - This proposal suggests a new application that enables certain advanced controls for power users. - Tentatively named "Apple Silicon.app", the name may be subject to change if a more suitable alternative arises. - I propose this application be added as a pre-installed utility on compatible systems: macOS (M-series), iPadOS (A-series and M-series), and iOS (iPhones with Apple-designed A5 and newer chips, provided the latest OS is available for them). Overview: This proposal introduces "Apple Silicon.app", a new system-level utility designed to offer power users greater flexibility and control over Apple Silicon behavior, as part of a broader feature update for Apple devices. I propose that Apple Silicon.app be automatically installed as a pre-installed application on Apple Silicon devices (Mac, iPad, iPhone, and select Vision devices) that support upcoming major system updates. Suggested Features of Apple Silicon.app: 1. Performance Core Control To describe this functionality, the following terminology will be used: - P-cores: Performance cores - E-cores: Efficiency cores I understand that Apple Silicon emphasizes energy efficiency, but I believe there are users—myself included—who prioritize maximum performance regardless of power usage. Therefore, I propose that the app offer a drop-down menu with the following six modes for performance core usage: A. Automatic (Recommended) – Default macOS behavior; automatically switches between P/E cores based on workload. B. Performance Priority – Prioritizes P-cores for high-demand tasks, restricts E-cores. Ideal for developers, video editors. C. Power Saving – Uses E-cores only whenever possible; limits P-core usage. Great for battery saving. D. P-Core Exclusive Mode – User-defined processes always run on P-cores. Suitable for benchmarks or low-latency tasks. E. E-Core Exclusive Mode – Prioritizes background tasks and thermal efficiency. F. Manual Assignment (Advanced) – Users can manually assign P/E cores per application in a dedicated settings screen. Additionally, I propose the following optional checkbox settings: - Thermal Safety Mode: Automatically switches from P- to E-cores when system heat exceeds a threshold. - Restore Core Settings on Wake: Remembers P/E settings after sleep/wake. - Power Source Adaptive Mode: Switches to power-saving on battery, and performance mode when plugged in. 2. Swap Memory Configuration The app should also enable user-level control over swap memory (i.e., using part of the SSD as virtual memory). Currently, macOS manages swap space automatically with no user customization available. I propose the ability to manually configure the swap system with the following options: - Enable Manual Configuration: Checkbox to switch from automatic to manual control. - Swap Size: Adjustable in GB units, allowing users to allocate desired swap capacity. 3. Other Settings At this point, these are the core features I propose. If additional useful features exist that align with this concept, I welcome further suggestions or expansion. As users—at least speaking for myself—we look forward to such customization options becoming available.

I'm developing an iPad app and encountered a strange issue with external Bluetooth keyboards. Issue: I have a Bluetooth keyboard set to JIS layout in Settings > General > Keyboard > Hardware Keyboard > Keyboard Type. If I connect the keyboard before launching the app, everything works fine, and the input follows the JIS layout. However, if I launch the app first and then turn on the Bluetooth keyboard, the input behaves as if the keyboard is in ANSI layout, even though the settings still show JIS. It seems like iPadOS defaults to ANSI if no external keyboard is connected when the app starts, and later connections do not update the layout properly. Has anyone encountered a similar issue, and is there a programmatic way to ensure that the correct keyboard layout is applied after the keyboard is connected? Any help or insights would be greatly appreciated!

I have a question about Apple certification. We are planning card reader via HID(human interface device) for iPad that support USB-C. iPad will receive data as HID protocol. In this case do I have to get certificate(for example MFi) like Apple USB accessory?

While compiling nRF5340 target of Dockkit ADK 1.0 following the guide of README.md, I selected the latest Nordic SDK, because there is no specified SDK version in the README.md. But it seems that ADK and SDK are not compatible with each others. For example, it calls nrfx_gpiote_channel_alloc() with one argument in PAL\NCS\HAPPlatformExperience.c. But the difinition of this function needs two arguments. Also I found that in some older version of Nordic SDK, this function needs only one argument. So could you please make sure which version of Nordic SDK should developer use?

Hi, We’re developing a BLE peripheral device and encountered a connection issue when connecting two devices (Device A and Device B) simultaneously to an iOS device. Problem: On iOS 18, we are experiencing occasional BLE timeouts and disconnections when both devices are connected at the same time. On iOS 16, we did not encounter this issue under the same conditions. What we’ve tried: Adjusted the connection interval from 30ms to 15ms. This seems to have improved stability somewhat. However, we still observe intermittent timeout/disconnection issues. Questions: Are there any known changes in BLE connection handling or timing constraints in iOS 18? Are there recommended connection parameter settings (interval, latency, timeout, etc.) for multi-device BLE connections in iOS? Is there a way to debug or log more details about the disconnection reasons on the iOS side? Any guidance or suggestions would be greatly appreciated.

After hardware and mobile phone hid mode pairing, the first connection is successful, after a while disconnect and reconnect,APP monitoring Bluetooth error NSLocalizedDescription = "Peer removed pairing information"; Failed to connect Hardware engineers detect the pairing information and find that the local pairing information of the iPhone has changed, which is a non-mandatory phenomenon