Hello, We are working on integrating billing into our dating app, targeted at the Russian market. Our main requirement is to support subscriptions with automatic renewal and cancellation. We understand that, according to App Store Review Guideline, all digital subscriptions should use Apple In-App Purchase (IAP). However, we are unsure how this applies in Russia, where some local regulations may limit the use of non-Russian payment processors, and where not all Russian bank cards are accepted by Apple. Our question is: -For iOS apps in Russia, is it strictly required to use Apple IAP for subscriptions? -Are there any approved exceptions allowing integration with local processors such as Robokassa or YooKassa? -How are other developers currently handling subscriptions for the Russian market? We want to ensure full compliance and avoid any risk of rejection or removal. Thank you in advance for any clarification. Best regards, Dan

Hello, I am developing an Apple Pay and In-App Provisioning integration for the bank where I work. All entitlements are properly configured, and we are integrated correctly with our Payment Network Operator (PNO). We are using PKAddPaymentPassViewControllerDelegate to handle the provisioning process. The flow progresses as expected up to the Terms and Conditions screen. However, after accepting the terms, the process fails with the message: "Could not add card." Upon checking the device logs using the Wallet profile configuration, I observed the following response from Apple's backend: Response: https://nc-pod10-smp-device.apple.com:443/broker/v4/devices/041315032816900221610987313158566F368A9CEBA1291E/cards/745f792b9d0644e5a6e713d54f505296/enable 500 Time profile: 1.80458 seconds { x-conversation-id = "6ec59a63424f4035915e32f22ea645e4" Vary = "accept-language" Content-Type = "application/json" x-pod = "nc-pod10" x-keystone-correlationid = "E3DD5A5A-FD18-4500-8570-2BD1334E281C" Date = "Thu, 17 Apr 2025 07:05:03 GMT" x-apay-service-response-details = "via_upstream" Content-Length = "49" x-envoy-upstream-service-time = "964" x-pod-region = "paymentpass.com.apple" } { errorCode = 40456; statusCode = 500; } This seems to indicate that the card enablement step is failing on the server side. Our internal systems have not logged any request failure from Apple at this step, which makes it difficult to pinpoint whether the issue is in the PNO integration, entitlement configuration, or something else. We are currently testing in a production environment on a physical device (not using sandbox), and provisioning flows are initiated through our iOS app using PKAddPaymentPassRequest. Could you please help us interpret error code 40456 and identify what steps we should take to resolve this issue? If needed, we can also provide the full device log and additional details. Thank you in advance for your support. Best regards, Mansur Bagwan

During checkout at apple.com using a non-supported Apple Pay on the Web browser, apple.com presents a QR like code offering to "Scan Code with iPhone" to pay. The payment continues using Apple Pay on the iPhone after scan. We already offer Apple Pay and Apple Pay on the Web. Is this QR code option available for us for non-supported browsers? Could you point me to the docs to add it? Thank you.

Hello, we develop a banking app and have successfully provisioned our cards (they are in the Wallet). But the method passes() of PassKit library always returns empty list. What may be the reason of this? Thanks.

Hello, I'm experiencing an irregular issue with Apple Pay merchant domain verification. As you know, Apple requires domain verification every two months to maintain Apple Pay functionality. The problem is that while the verification sometimes happens automatically without any issues, other times it fails to complete, even though the required file "apple-developer-merchantid-domain-association.txt" is correctly available on our server. When automatic verification fails, the Apple Pay service becomes non-functional on our website, forcing us to perform a manual verification to restore the pending service. Is it normal to encounter such inconsistent automatic verification processes? What could be causing these intermittent verification failures, whereas manual verification always succeed? suggesting this might not be related to IP address restrictions described on the Apple documentation. Thank you in advance,

Apple Sandbox is not available in India, also Apple Pay itself is not supported by Indian Banks. How can I still test using Apple Pay sandbox in India? I am trying to add test cards on my iPhone and it fails to add it. It tries to connect to Issuer, which it should not for sandbox Apple Id. Can anyone help how to achieve this?

Hello Apple Devs, We’re currently trying to integrate Apple Pay on the web using Apple Pay JS. We've followed the official documentation closely, but we're running into a blocker during the merchantSession validation phase. We successfully retrieved a merchantSession, which looks like this: json { "displayName": "Our Name", "domainName": "https://pay.ourdomain.co", "epochTimestamp": , "expiresAt": ****************, "merchantIdentifier": "", "merchantSessionIdentifier": ", "nonce": "", "operationalAnalyticsIdentifier": our name "t:", "pspId": "", "retries": 0, "signature": "*****************..." } Issue: Shortly after initiating the session, we receive a cancel event with the following info: ApplePayCancelEvent { type: "cancel", sessionError: { code: "unknown", info: {} } } We're unsure what causes the cancellation. There are no clear error messages or hints in the logs to identify what went wrong. What We’ve Checked: The merchantSession is returned successfully from our backend. The domainName matches our frontend domain (https://pay.durdomain.co). The session hasn’t expired when tested. We're using Apple Pay JS APIs as described in the documentation. Help Needed: What can trigger an ApplePayCancelEvent with an "unknown" error code? Any insight or guidance would be deeply appreciated. Thanks in advance!

你好，我们6月1日收到比较多的韩国用户反馈购买我们的内购以后，系统会在稍后的几分钟再次多次从用户的卡里扣出相应的款项，但是我们没有办法第一时间反馈给你们，导致很多用户流失，请问我们怎么才能第一时间联系到你们，还有我们怎么才能第一时间知道是你们的系统是否某个功能出了问题，是否也有相应的论坛我们可以第一时间看到你们相关问题的报道，这样我们排查问题就没那么辛苦，感谢

'Company A' is scheduled to merge with its parent company, 'Company B'. Both A and B have Apple accounts. A's account has one domain registered for Apple Pay integration, while Account B has no domain registered. We attempted to register A’s domain under B’s account. However, the notification 'Requested domain name has been verified previously.' appeared, and we could not complete the registration. Please confirm whether it is correct that a domain already registered under Account A cannot be registered again under Account B. If we cannot register same domain in two accounts, we believe that the domain registered under A's account must be deleted first and then registered under B's account. In that case, will payments become unavailable immediately upon deletion of the domain, or will payments still be possible for a certain period of time after deletion? In our testing, we found that payments were not blocked immediately, but we would like to confirm further. We are concerned about the possibility of transaction failures during the short period between deleting the domain from A's Account and registering it under B's Account.

Hi Everyone, My team is working on an online marketplace for FMBs in Saudi Arabia (with a plan to expand to other markets later). We are currently working on integrating multiple payment gateways with embedded Apple Pay support into our platform. We’ve encountered an issue with the apple-developer-merchantid-domain-association file. Based on advice from one of our payment partners, we've ensured that the domain association file is uploaded in the correct format. This works successfully with our first payment gateway. However, for the additional payment gateways we are integrating, we would also like to enable Apple Pay with embedded support. The challenge is that each payment gateway requires its own domain verification, but the verification file uses the same file name. This prevents us from supporting multiple gateways on the same domain. Has anyone in the house been able to implement a similar solution, or know how we can best implement this? Please, I'll appreciate advise on how we can configure Apple Pay domain verification to support multiple payment gateways on the same domain? Any specific guidance or best practices would be greatly appreciated. Best regards,

We are looking for sample payload for merchant registration API. We have tried to test the api and getting an error. Request: curl --location 'https://apple-pay-gateway-cert.apple.com/paymentservices/registerMerchant' --header 'Content-Type: application/json' --data '{ "domainNames": "https://checkout.dev.sandbox-netvalve.com", "encryptTo": "platformintegrator.com.netvalve.uat", "partnerInternalMerchantIdentifier": "merchant.test.netvalve", "partnerMerchantName": "Test" }' Response: { "statusMessage": "Payment Services Exception invalid or Malformed Json Received", "statusCode": "400" }

We are having trouble trying to renew our Apple Pay Merchant Identity Certificate. We can create the CSR file and add to the developer portal. We then convert this to a .pem and then a .p12. When we test the certificate in Postman however, we see the following error: "statusMessage": "Payment Services Exception pspId=xxxx unauthorized to process transactions on behalf of merchantId=xxxx reason=xxxx is not a registered merchant in WWDR and isn't properly authorized via Mass Enablement, either.", "statusCode": "417" We are sending the following POST request to 'https://apple-pay-gateway.apple.com/paymentservices/paymentSession': {"merchantIdentifier": "merchant.com.xxxx.applepaytest", "domainName": "beta-xxxx.com", "displayName": "beta-xxxx.com"} Anyone got any ideas what the issue may be? In the meantime I will look at completing our domain verification as that is also due soon and we thought it may possibly have something to do with the certificate issues we are seeing.

We’re attempting to call the Apple Pay Web Merchant Registration API using our Platform Integrator flow and consistently receive 401 Unauthorized, despite successful TLS/mTLS. Details: Endpoint: https://apple-pay-gateway-cert.apple.com/paymentservices/registerMerchant (POST) Payload: { "domainNames": ["breakerfy.com"], "encryptTo": "platformintegrator.ai.packman", "partnerInternalMerchantIdentifier": "merchant.ai.packman.1", "partnerMerchantName": "breakerfy", "merchantUrl": "https://breakerfy.com" } Domain association: URL: https://breakerfy.com/.well-known/apple-developer-merchantid-domain-association What we tried: We created a Payment Platform Integrator ID (platformintegrator.ai.packman) We created a CertificateSigningRequest We used the certificate signing request to create an Apple Pay Platform Integrator Identity Certificate and downloaded the signed certificate. We exported the Private Key from keychain access in PKCS 12 format We converted both the private key and the signed certificate to PEM format We created a merchant id We used the converted keys to send requests to the API We received { "statusMessage": "Payment Services Exception Unauthorized", "statusCode": "401" } we also tried curl with the original p12 file and also had no luck. What could be the issue ?

Hi - I have a question. I am trying to understand when Apple Pay will be available on non-IOS desktop devices (specifically Google Chrome). I was hoping to understand better the process, specifically the following: How can I get the Apple Pay QR code installed on my desktop checkout page on Google Chrome? How long does this process usually take? If I work with Stripe, do I need to get approval from them to install the Apple QR code onto my Google Chrome checkout page? Is this readily available to all merchants (i.e., installing Apple Pay on Google Chrome)/ I have not seen this on any other checkout pages yet. Are there any examples you could point me to of merchants that have installed Apple Pay onto non-IOS desktop so I could trial the process (i.e., a list of existing merchants that have put the QR code onto their Google Chrome checkout pages)?

PLATFORM AND VERSION iOS Development environment: Xcode Version 16.2 (16C5032a), macOS 14.6.1 Run-time configuration: iOS 26 DESCRIPTION OF PROBLEM We would like to seek clarification on how to determine whether a card used via Apple Pay is a credit or debit card before sending the transaction request. Currently, we can retrieve the card type information (credit/debit) from the Apple Pay response payload, but this is only available after the payment has been processed. However, we need to determine the card type in advance, as our system calculates and applies transaction fees based on the card type, which should be added to the total transaction amount before submission. Could you please advise if there is any parameter, API field, or pre-authorization mechanism available to identify the card type prior to initiating the transaction request? We would appreciate your guidance or any related documentation for implementing this. STEPS TO REPRODUCE Initiate Apple pay Payment from Apple pay Getting payload we can retrieve the card type information (credit/debit) from the Apple Pay response payload, but this is only available after the payment has been processed. We need to identify if there's any way to know the card user selected(whether it is credit/debit) before processing the payment.

We request your support in enabling the extended entitlement feature for our team when creating provisioning profiles. This is because we need to include the ApplePay In-App Provisioning Development extended entitlement in our Bancoagricola app. Currently, when creating new provisioning profiles, the screen to configure Additional Entitlements is not displayed for our team. However, we have verified with our provider HST (https://hst.com.br/) that this screen does appear in their Apple account. Thank you very much for your support.

We are integrating iOS 16 recurring payments in our app, everything works fine but we have a few questions Question 1 let recurringPaymentRequest = PKRecurringPaymentRequest(         paymentDescription: "Pro Membership",         regularBilling: regularBilling,         managementURL: url       ) we assume managementURL is supposed to come in the user's wallet where he/she can tap to change the recurring payment option to our backend, but in the wallet, the transaction appears without this URL and have no indication that it is a recurring payment, Can someone guide what we missed Question 2 For apps that only have apple pay on mobile, managementURL can open the app as a deep link from the Wallet app and the user can update or delete the payment method for the automatic reload payment from the app directly, Question 3 For cancellation, the recurring payment app should have some UI where the user can tap which hit our backend and remove the apple pay merchant token from our system and apply cancellation business logic, no apple API involves in the cancellation of recurring payment

Hi there, is there a way, or a list of test cards, to simulate error on payment in an Apple Pay sandbox environment ? I tried different cards mentioned here but every try was successful : https://developer.apple.com/apple-pay/sandbox-testing/

I'm facing problem with in-app-provisioning in production application. When we try to tokenize (before T&C step) we are getting error from topic. I've also posted this in Feedback Assistant: FB18403577. I'll be very happy if someone could help me to get what is wrong with data or configuration of application.

Apple Pay processed a transaction but the account has insufficient funds. Later the transaction is declined. Is it expected from Apple Pay? Does Apple Pay throws an error if the account has insufficent funds- iOS Swift ? Does anyone know the code to handle this scenario in Swift iOS?