Hello, Basically, I am reading and writing an asset. To simplify, I am just reading the asset and rewriting it into an output video without any modifications. However, I want to add a fade-out effect to the last three seconds of the output video. I don’t know how to do this. So far, before adding the CMSampleBuffer to the output video, I tried reducing its volume using an extension on CMSampleBuffer. In the extension, I passed 0.4 for testing, aiming to reduce the video's overall volume by 60%. My question is: How can I directly adjust the volume of a CMSampleBuffer? Here is the extension: extension CMSampleBuffer { func adjustVolume(by factor: Float) -> CMSampleBuffer? { guard let blockBuffer = CMSampleBufferGetDataBuffer(self) else { return nil } var length = 0 var dataPointer: UnsafeMutablePointer<Int8>? guard CMBlockBufferGetDataPointer(blockBuffer, atOffset: 0, lengthAtOffsetOut: nil, totalLengthOut: &length, dataPointerOut: &dataPointer) == kCMBlockBufferNoErr else { return nil } guard let dataPointer = dataPointer else { return nil } let sampleCount = length / MemoryLayout<Int16>.size dataPointer.withMemoryRebound(to: Int16.self, capacity: sampleCount) { pointer in for i in 0..<sampleCount { let sample = Float(pointer[i]) pointer[i] = Int16(sample * factor) } } return self } }

Hey, Quick question. I noticed that Adobe's new app, Project Indigo, allows you to open the app using the Camera Control button. However, when your device is locked it just shows this screen: Would this normally be approved by the Appstore approval process? I ask because I would like to do something similar with my camera app. I know that this is not the best user experience, but my apps UI is not built in Swift and I don't have the resources to build the UI again. At least this way the user experience would be improved from what it is now, where users cannot even launch the app. I get many requests per week about this feature and would love to improve the UX for my users, even if it's not the best possible. Thanks, Alex

I found that the aggregated device correctly obtains input channels in the standard microphone mode. However, in voice isolation mode, it only retrieves channels from the first sub-device in the aggregated device's list. If I want to properly obtain channel information in voice isolation mode, how should I do it?

Hi everyone, I’m trying to use AVAssetResourceLoaderDelegate to handle a live radio stream (e.g. Icecast/HTTP stream). My goal is to have access to the last 30 seconds of audio data during playback, so I can analyze it for specific audio patterns in near-real-time. I’ve implemented a custom resource loader that works fine for podcasts and static files, where the file size and content length are known. However, for infinite live streams, my current implementation stops receiving new loading requests after the first one is served. As a result, the playback either stalls or fails to continue. Has anyone successfully used AVAssetResourceLoaderDelegate with a continuous radio stream? Or maybe you can suggest betterapproach for buffering and analyzing live audio? Any tips, examples, or advice would be appreciated. Thanks!

I'm using an AVAudioConverter object to decode an OPUS stream for VoIP. The decoding itself works well, however, whenever the stream stalls (no more audio packet is available to decode because of network instability) this can be heard in crackling / abrupt stop in decoded audio. OPUS can mitigate this by indicating packet loss by passing a null pointer in the C-library to int opus_decode_float (OpusDecoder * st, const unsigned char * data, opus_int32 len, float * pcm, int frame_size, int decode_fec), see https://opus-codec.org/docs/opus_api-1.2/group__opus__decoder.html#ga9c554b8c0214e24733a299fe53bb3bd2. However, with AVAudioConverter using Swift I'm constructing an AVAudioCompressedBuffer like so:         let compressedBuffer = AVAudioCompressedBuffer(             format: VoiceEncoder.Constants.networkFormat,             packetCapacity: 1,             maximumPacketSize: data.count         )         compressedBuffer.byteLength = UInt32(data.count)         compressedBuffer.packetCount = 1   compressedBuffer.packetDescriptions! .pointee.mDataByteSize = UInt32(data.count)         data.copyBytes(             to: compressedBuffer.data .assumingMemoryBound(to: UInt8.self),             count: data.count         ) where data: Data contains the raw OPUS frame to be decoded. How can I specify data loss in this context and cause the AVAudioConverter to output PCM data whenever no more input data is available? More context: I'm specifying the audio format like this:         static let frameSize: UInt32 = 960         static let sampleRate: Float64 = 48000.0         static var networkFormatStreamDescription = AudioStreamBasicDescription(             mSampleRate: sampleRate,             mFormatID: kAudioFormatOpus,             mFormatFlags: 0,             mBytesPerPacket: 0,             mFramesPerPacket: frameSize,             mBytesPerFrame: 0,             mChannelsPerFrame: 1,             mBitsPerChannel: 0,             mReserved: 0         )         static let networkFormat = AVAudioFormat( streamDescription: &networkFormatStreamDescription )! I've tried 1) setting byteLength and packetCount to zero and 2) returning nil but setting .haveData in the AVAudioConverterInputBlock I'm using with no success.

Is there a way to permanently disable PHASE SDK logging? It seems to be a lot chattier than Apple's other SDKs. While developing a RealityKit app that uses AudioPlaybackController, I must manually hide the PHASE SDK log output several times each day so I can see my app's log messages. Thank you.

Some users have reported an error editing portrait photo assets in my app: The operation couldn’t be completed. (CINonLocalizedDescriptionKey error 3.) What is that error? Will affected photos always encounter this error (due to data corruption for example) or can it be resolved in a future iOS update? FB16241301

Since the last update to IOS 26.0 (23A5276f) the AirPods connect to my IPhone and the Audio is still running through the phone. They are shown in the Bluetooth Icon that they’re paired.

Xcode Version 16.3 (16E140) App developed in Flutter Flutter 3.29.3 Test iPhone device: iPhone 16 Pro running iOS 18.5 I have an app that requires Camera access. This used to work before with iOS 18.4.x. I have dumbed down my app to just get Camera permission. Even then it fails flutter: Camera permission: PermissionStatus.denied flutter: Photos permission: PermissionStatus.denied flutter: Microphone permission: PermissionStatus.denied flutter: --- End Debug Info --- flutter: Loaded translations from asset for en_US container_create_or_lookup_app_group_path_by_app_group_identifier: client is not entitled container_create_or_lookup_app_group_path_by_app_group_identifier: client is not entitled container_create_or_lookup_app_group_path_by_app_group_identifier: client is not entitled container_create_or_lookup_app_group_path_by_app_group_identifier: client is not entitled container_create_or_lookup_app_group_path_by_app_group_identifier: client is not entitled container_create_or_lookup_app_group_path_by_app_group_identifier: client is not entitled flutter: CAMERA PERMISSION STATUS: PermissionStatus.permanentlyDenied Camera permissions don't show up in my App settings or under "Settings -&gt; Privacy and Security -&gt; Camera" and I am at loss to understand why this is happening.

Hello, How do I find the apple music catalogID for songs in a apple music playlist? Im building an iOS app that uses MusicKit/Apple Music API. For this example, you can assume that my iOS app simply allows users to upload their apple music playlists. And when users open a specific playlist, I want to find the catalogID for each song. Currently all the songs are returning song IDs in this format “i.PkdJvPXI2AJgm8”. I believe these are libraryIDs, not catalogIDs. I’d like to find a front end solution using MusicKit. But perhaps a back end solution using the Apple Music Rest API is required. Any recommendations would be appreciated!

Hi guys, How to achieve the following feature on macOS when a USB device (Camera/Mic/Speaker) is connected: When a third-party video conferencing app is not in a meeting, ensure the app defaults to using the USB device (Camera/Mic/Speaker). When a third-party conferencing app is in a meeting, ensure the app automatically switches to the USB device (Camera/Mic/Speaker). I want to make use of IOKit extension to hidden or ignore build-in camera to realize the requirement. however the extension can't be loaded for Invalid permissions in MacOS 15.4.1, buildVersion:24E263. I also tried to run in in MacOS 14.4.1, which can be loaded but can't auto load when restart laptop as KDK version not match. Could you please give me some suggestion? Is it possible hidden build-in camera in MacOS M-series chip? Is there any other method to realize the feature. Thanks a lot.

Issue: In iOS 26 (tested on Developer Beta), AVCaptureMetadataOutputObjectsDelegate no longer receives callbacks when using .face detection. metadataOutput.metadataObjectTypes = [.face]

I’m spot-checking some of the data I’m extracting from the Apple Music Feed parquet files and finding numerous issues of invalid album IDs. For example, just looking at any album with a primary artist id of 163043, I see a few albums that are not available at music.apple.com/us/album/NNN. These include: 981094158 - Time and the River 1803443737 - Celebration (Live New York ’80) 1525426873 - Anything You Want: The Warner-Reprise-Elektra Years I notice that neither of these album ids are returned using the general Music API, so I’m a bit confused why they would exist in the parquet files at all. Thanks.

Use case: When SharePlay -ing a fully immersive 3D scene (e.g. a virtual stage), I would like to shine lights on specific Personas, so they show up brighter when someone in the scene is recording the feed (think a camera person in the scene wearing Vision Pro). Note: This spotlight effect only needs to render in the camera person's headset and does NOT need to be journaled or shared. Before I dive into this, my technical question: Can environmental and/or scene lighting affect Persona brightness in a SharePlay? If not, is there a way to programmatically make Personas "brighter" when recording? My screen recordings always seem to turn out darker than what's rendered in environment, and manually adjusting the contrast tends to blow out the details in a Persona's face (especially in visionOS 26).

Hi, On macOS I used to open MP3 and MP4 files with ExtAudioFile. For a few years it doesn't work anymore. So I decided to try different macOS API using the AudioFileID of AudioToolbox framework. I decided to write a test: https://gist.github.com/joelkraehemann/7f5b241b52ca38c3a765c138fb647588 It fails right here: AudioFileOpenWithCallbacks() By telling OSStatus error 1954115647, which means kAudioFileUnsupportedFileTypeError. The filename was set to an MP4 file: ~/Music/test.mp4 Howto fix this? regards, Joël

I'm creating an app that uses AVCaptureSession to pass camera input to AVCaptureMetadataOutput type set [metaout setMetadataObjectTypes:@[AVMetadataObjectTypeFace]] and scan Face. After updating to OS 26 Beta2 and iOS 26 Beta2, an issue has occurred where the delegate method of AVCaptureMetadataOutputObjectsDelegate is not called on some devices. The following devices are experiencing this issue. iPad (9th Gen) iPad air (4th Gen) iPhone 15 This issue has not occur on any other devices I have. I tried running the AVFoundation sample code on the Apple Developer site on the above device. The same problem still occurs. https://developer.apple.com/documentation/avfoundation/capture_setup/avcambarcode_detecting_barcodes_and_faces Are any additional settings required after OS 26 beta and iOS 26 beta? Or is there some problem on the OS side?

Environment→ ・Device: iPad 10th generation ・OS：**iOS18.3.2 We're using AVAudioPlayer to play a sound when a button is tapped. In our use case, this button can be tapped very frequently — roughly every 0.1 to 0.2 seconds. Each tap triggers the following function: var audioPlayer: AVAudioPlayer? func soundPlay(resource: String, type: String){ guard let path = Bundle.main.path(forResource: resource, ofType: type) else { return } do { audioPlayer = try AVAudioPlayer(contentsOf: URL(fileURLWithPath: path)) audioPlayer!.delegate = self try audioSession.setCategory(.playback) } catch { return } self.audioPlayer!.play() } The issue is that under high-frequency tapping (especially around 0.1–0.15s intervals), the app occasionally crashes. The crash does not occur every time, but it happens randomly — sometimes within 30 seconds, within 1 minute, or even 3 minutes of continuous tapping. Interestingly, adding a delay of 0.2 seconds between button taps seems to prevent the crash entirely. Delays shorter than 0.2 seconds (e.g.,0.15s,0.18s) still result in occasional crashes. My questions are: **Is this expected behavior from AVAudioPlayer or AVAudioSession? Could this be a known issue or a limitation in AVFoundation? Is there any documentation or guidance on handling frequent sound playback safely?** Any insights or recommendations on how to handle rapid, repeated audio playback more reliably would be appreciated.

(Note: this is part 1 of a 3 part posting. See Part 2 or Part 3) At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for Camera & Photos. WWDC25 Camera & Photos group lab ran for one hour at 6 PM PST on Tuesday June 10th, 2025 Introductory kick-off questions Question 1 Tell us a little about the new AVFoundation Capture APIs we've made available in the new iOS 26 developer preview? Cinematic Capture API (strong/weak focus, tracking focus)(scene monitoring)(simulated aperture)(dog/cat heads/groupIDs) Camera Controls and AirPod Stem Clicks Spatial Audio and Studio Quality AirPod Mics in Camera Lens Smudge Detection Exposure and Focus Rect of Interest Question 2 I built QR code scanning into my app, but on newer iPhones I have to hold the phone very far away from the QR code, otherwise the image is blurry and it doesn't scan. Why is this happening and how can I fix it? Every year, the cameras get better and better as we push the state of the art on iPhone photography and videography. This sometimes results in changes to the characteristics of the lenses. min focus distance newer phones have multiple lenses automatic switching behavior Use virtual device like the builtInDualWide or built in Triple, rather than just the builtInWide Set the videoZoomFactor to 2. You're done. Question 3 Last year, we saw some exciting new APIs introduced in AVFoundation in the health space. With Constant Color photography, developers can take pictures that have constant color regardless of ambient lighting. There are some further advancements this year. Davide, could you tell us about them? constant color photography is mean to remove the "tone mapping" applied to photograph captured with camera app, usually incldsuing artistic intent, and instead try to be a close as possible to the real color of the scene, regardless of the illumination constant color images could be captured in HEIF anf JPEG laste year. this year we are adding Support for the DICOM medical imaging photo format. It is a fomrat used by the health industry to store images related to medical subjects like MRI, skin problems, xray and so on. It's writable and also readable format on all OS26, supported through AVCapturePhotoOutput APIs and through the coregraphics api. for coregrapphics there is a new DICOM entry in the property dictionary which includes all the dicom availbale and defined propertie in a file. finder will also display all those in the info panel (Address why a developer would want to use it) - not for regualr picture taking apps. for those HEIF and JPEG are the preferred delivery format. use dicom if your app produces output that are health related, that you can also share with health providers or your doctors Main session developer questions Question 1 LiDAR vs. Dual Camera depth generation: Which resolution does the LiDAR sensor natively have (iPhone 16 Pro) and when to prefer LiDAR over Dual Camera? Both report formats with output resolutions (we don't advertise sensor resolution) Lidar vs Dual, etc: Lidar: Best for absolute depth, real world scale and computer vision Dual, etc: relative, disparity-based, less power, photo effects Also see: 2022 WWDC session "Discovery advancements in iOS camera capture: Depth, focus and multitasking" Question 2 Can true depth and lidar camera run at 60fps? Lidar can do 30fps (edited) Front true depth can do 60fps. Question 3 What’s the first class way to use PhotoKit to reimplement a high performance photo grid? We’ve been using a LazyVGrid and the photos caching manager, but are never able to hit the holy trinity (60hz, efficient memory footprint, minimal flashes of placeholder/empty cells) use the PHCachingImageManager to get media content delivered before you need to display it specify the size you need for grid sized display set the options PHVideoRequestOptionsDeliveryModeFastFormat, PHImageRequestOptionsDeliveryModeFastFormat and PHImageRequestOptionsResizeModeFast Question 4 For rending live preview of video stream, Is there performance overhead from using async and Swift UI for image updates vs UIViewRepresentable + AVCaptureVideoPreviewLayer.self? AVCaptureVideoPreviewLayer is the most efficient display path Use VDO + AVSampleBufferDisplayLayer if you need to modify the image data Swift UI image is optimized for static image content Question 5 Is there a way to configure the AVFoundation BuiltInLiDarDepthCamera mode to provide a depth map as accurate as ARKit at close range? The AVCaptureDepthDataOutput supports filtering that reduces noise and fills in invalid values. Consider using this for smoother depth maps Question 6 Pyramid-based photo editing in core image (such as adobe camera raw highlights and shadows)? First off you may want to look a the builtin filter called CIHighlightShadowAdjust Also the noise reduction in the CIRawFilter uses a pyramid-based algorithm. You can also write your own pyramid-based algorithms by taking an input image: down sample it by two multiply times using imageByApplyingAffineTransform apply additional CIKernels to each downsampled image as needed. use a custom CIKernel to combine the results. Question 7 Is the best way to integrate an in-app camera for a “non-camera” app UIImagePickerController? Yes, UIImagePickerController provides system-provided UI for capturing photos and movies. Question 8 Hello, my question is on Deferred Photo Processing? Say I have a photo capture app that adds a CIFilter to the capture. How can I take advantage of Deferred Photo Processing? Since I don’t know how to detect when the deferred captured photo is ready CIFilter can be called on the final at that point Photo will have to be re-inserted into the Photo library as adjustment Question 9 For shipping photo style assets in the app that need transparency what is the best format to use? JPEG2000? will moving to this save a lot of space comapred to PNG or other options? If you want lossless compression PNG is good and supports unpremutiplied alpha If you want lossy compression HEIF supports premutiplied or unpremutiplied alpha (Note: this is part 1 of a 3 part posting. See Part 2 or Part 3)

getting an interesting error attempting to compile my app in Xcode 26 beta. error: Unable to find module dependency: '_MediaPlayer_AppIntents' (in target 'icatcher' from project 'icatcher') note: A dependency of main module 'MainModuleCrossImportOverlays' (in target 'icatcher' from project 'icatcher') Unable to find module dependency: '_MediaPlayer_AppIntents' Not sure what to try and pull to fix this issue

When shooting with an iPhone 15 or later, it’s possible to capture HEIC or JPEG images that include gain map information conforming to the ISO 21496-1 standard. However, during image format transcoding, the HEIC codec is able to preserve the ISO 21496-1 gain map. But when converting from HEIC to JPEG, the gain map is transformed into the Apple Gain Map format instead. Is there any solution to this issue?