iOS 26.0 (23A5276f) – Bluetooth Call Audio Issue I’m experiencing a Bluetooth audio issue on iOS 26.0 (build 23A5276f). I cannot make or receive phone calls properly using Bluetooth devices — this affects both my car’s Bluetooth system and my AirPods Pro (2nd generation). Notably: Regular phone calls have no audio (either I can’t hear the other person, or they can’t hear me). WhatsApp and other VoIP apps work fine with the same Bluetooth devices. Media playback (music, video, etc.) works without issues over Bluetooth. It seems this bug is limited to the native Phone app or the system audio routing for regular cellular calls. Please advise if this is a known issue or if a fix is expected in upcoming beta releases.

Hello, I am developing a custom player SDK using AVPlayer to support HLS and LL-HLS live streaming. I have some questions about the internal logic of AVPlayer regarding ABR, as this information is not explicitly covered in the documentation. ABR Switching Logic: Does AVPlayer trigger bitrate switching primarily based on stall occurrences (buffer starvation)? I am curious if the switching logic is reactive to stalls or if it proactively switches to prevent them based on throughput estimation. Developer Controls for ABR: To influence or control the ABR selection, are preferredPeakBitRate and preferredForwardBufferDuration the only properties available to developers? Are there any other recommended APIs to assist with ABR decisions? Thank you for your help.

using iOS 26.2; Airpods 4 Long press stem to launch Siri Speak "Record Voice Memo" -> Recording starts Recording in progress... Long press stem to launch Siri -> Nothing happens. To stop recording need use phone. is this intended behaviour? i would like to be able to stop recording with Siri I am able to launch Siri from phone while recording, but point is to keep phone in pocket and start/stop recordings only via Airpods.

Hi everyone, I'm running into an issue with AVAudioRecorder when handling interruptions such as phone calls or alarms. Problem: When the app is recording audio and an interruption occurs: I handle the interruption with audioRecorder?.pause() inside AVAudioSession.interruptionNotification (on .began). On .ended, I check for .shouldResume and call audioRecorder?.record() again. The recorder resumes successfully, but only the audio recorded after the interruption is saved. The audio recorded before the interruption is lost, even though I'm using the same file URL and not recreating the recorder. Repro: Start a recording with AVAudioRecorder Simulate a system interruption (e.g., incoming call) Resume recording after the interruption Stop and inspect the output audio file Expected: Full audio (before and after interruption) should be saved. Actual: Only the audio after interruption is saved; the earlier part is missing Notes: According to the documentation, calling .record() after .pause() should resume recording into the same file. I confirmed that the file URL does not change, and I do not recreate the recorder instance. No error is thrown by the system during this process. This behavior happens consistently when the app is interrupted and resumed. Question: Is this a known issue? Is there a recommended workaround for preserving the full recording when interruptions happen? Thanks in advance!

I’m an amateur developer working on a free utility for composers/producers, for which the macOS release needs to create and name RTP-MIDI sessions in Audio MIDI Setup from the command line (so I can ship a small C helper instead of telling users to click through the UI). Here’s what I’ve tried so far, without luck: • Plist hacks: Injecting entries into ~/Library/Audio/MIDI Configurations/*.mcfg works when AMS is closed, but AMS immediately locks and reverts my changes when it’s open. • CoreMIDI C API: I can create virtual ports with MIDISourceCreate, but attempting MIDIObjectGetDataProperty on the apple.midirtp.session plugin always returns err –10836. • Obj-C & Swift: Loading MIDINetworkSession and calling defaultSession, init, setNetworkName: and setting enabled = YES doesn’t produce a new session object in the Network panel. • dlopen/dlsym: I extracted the real CoreMIDI binary out of the dyld shared cache and tried binding _MIDINetworkSessionCreate, _SetName, _SetEnabled, etc., but all the symbols come back null or my tool segfaults. • Plugin registration: I’ve pulled the factory UUID (70C9C5EA-7C65-11D8-B317-000393A34B5A) from /System/Library/Extensions/AppleMIDIRTPDriver.plugin/Contents/Info.plist and called CFPlugInRegisterFactories, but it still never exposes the session-creation calls. At this point I’m convinced I’m either loading the wrong binary or missing one critical step in registering the RTP-MIDI plugin’s private API. Can anyone point me to: The exact path of the dylib or bundle that actually exports the MIDINetworkSessionCreate/MIDINetworkSessionSetName/MIDINetworkSessionSetEnabled symbols? A minimal working snippet (C or Obj-C) that reliably creates and names a Network-MIDI session? Any pointers, sample code, or even ideas about where Apple hides this functionality on macOS 15 would be hugely appreciated. Thanks!

For iOS17 we've had no problem playing Apple Fairplay encrypted content with keys delivered from our key server running on FairPlay Streaming Server SDK 5.1 and subsequently FairPlay Streaming Server SDK 26. It's built and deployed using Xcode Version 26.1.1 (17B100) with no changes to the code and - as expected - the content continued to be successfully decrypted and played (so far so good). However, as soon as a device was updated to iOS26, that device would no longer play the encrypted content. Devices remaining on iOS17 continue to work normally and the debugging logs are a sanity-check that proves that. Is anyone else experiencing this issue? Here's the code (you should be able to drop it into a fresh iOS Xcode project and provide a server url, content url and certificate).

Hello, I'm investigating an issue with LL-HLS playback using AVPlayer, specifically during DVR Live seeking (seeking to a past time). I noticed that in certain seeking scenarios, AVPlayer sends a Blocking Playlist Reload request that includes the _HLS_msn parameter but is missing the _HLS_part parameter. While I understand this is compliant with the HLS spec, I would like to know the specific criteria AVPlayer uses to decide when to drop the _HLS_part parameter. Does AVPlayer intentionally omit the part info when it determines that loading a specific partial segment is unnecessary during a seek operation? Clarification on this behavior would help us greatly in debugging our stream delivery. Thanks in advance.

Hello Apple Developer Community, I am trying to play an HLS stream using the React Native Video player (underneath it's using AvPlayer). I am able to play the stream smoothly, but in some cases the player can not play the stream properly. Behaviour: react-native-video: I am getting the below error. Error details from react-native-video player: Error Code: -12971 Domain: CoreMediaErrorDomain Localised Description: The operation couldn’t be completed. (CoreMediaErrorDomain error -12971.) Target: 2457 The error does not provide a specific failure reason or recovery suggestion, which makes troubleshooting challenging. AvPlayer on native iOS project: Video playback stopped after playing a few seconds. AVPlayer configuration: player.currentItem?.preferredForwardBufferDuration = 1 player.automaticallyWaitsToMinimizeStalling = true N.B.: The same buffer duration is working perfectly for others. Stream properties: video resolution: 1280 x 720 I have attached an overview report generated from MediaStreamValidator. I would appreciate any insights or suggestions on how to address this error. Has anyone in the community experienced a similar issue or have any advice on potential solutions? Thank you for your help!

I noticed that while playing back the same tracks via MusicKit on different OSes I get different results regarding the audio files being streamed. Playing back a lossless file with 24Bit 48kHz and watching the Console for RemotePlayerService I get: on iPadOS: Lossless; groupID: audio-alac-stereo-48000-24; bitDepth: 24-bit; sampleRate: 48khz; codec: alac; channels: 2; layout: Stereo; on macOS: Creating AudioQueue with format:'paac', framesPerPacket:1024, sampleRate:44100 While the iPad looks perfect, the Mac does not. Is there a way to fix this issue on macOS. BTW: I switched the Audio-Midi Settings before, after and while the macOS App was lunched. I also switched to different output devices. I wasn't able to change the bad audio-output on the mac. I tested this under Sequoia 15.5 and Tahoe beta 1, Xcode 16.4 and 26 beta 1. The AudioVariants of the Album/Tracks are .dolbyAtmos, .lossless, .lossyStereo Apple Music displays Lossless 24 Bit/48 kHz ALAC when clicking on the playercontroll icon on macOS I hope there are only some missing or misconfigured properties to get macOS up to par. Thanks :-)

Is there any feasible way to get a Core Audio device's system effect status (Voice Isolation, Wide Spectrum)? AVCaptureDevice provides convenience properties for system effects for video devices. I need to get this status for Core Audio input devices.

My app want Converting iphone12 HDR Video to SDR，to edit。 follow the doc Apple-HDR-Convert. My code setting the pixBuffAttributes        [pixBuffAttributes setObject:(id)(kCVImageBufferYCbCrMatrix_ITU_R_709_2) forKey:(id)kCVImageBufferYCbCrMatrixKey];       [pixBuffAttributes setObject:(id)(kCVImageBufferColorPrimaries_ITU_R_709_2) forKey:(id)kCVImageBufferColorPrimariesKey];       [pixBuffAttributes setObject:(id)kCVImageBufferTransferFunction_ITU_R_709_2 forKey:(id)kCVImageBufferTransferFunctionKey];       playerItemOutput = [[AVPlayerItemVideoOutput alloc] initWithPixelBufferAttributes:pixBuffAttributes]; but I get the playerItemOutput's output buffer   CFTypeRef colorAttachments = CVBufferGetAttachment(pixelBuffer, kCVImageBufferYCbCrMatrixKey, NULL);     CFTypeRef colorPrimaries = CVBufferGetAttachment(pixelBuffer, kCVImageBufferColorPrimariesKey, NULL);     CFTypeRef colorTransFunc = CVBufferGetAttachment(pixelBuffer, kCVImageBufferTransferFunctionKey, NULL);      NSLog(@"colorAttachments = %@", colorAttachments);     NSLog(@"colorPrimaries = %@", colorPrimaries);     NSLog(@"colorTransFunc = %@", colorTransFunc); log output: colorAttachments = ITU_R_2020 colorPrimaries = ITU_R_2020 colorTransFunc = ITU_R_2100_HLG pixBuffAttributes setting output format invalid，please help！

getting an interesting error attempting to compile my app in Xcode 26 beta. error: Unable to find module dependency: '_MediaPlayer_AppIntents' (in target 'icatcher' from project 'icatcher') note: A dependency of main module 'MainModuleCrossImportOverlays' (in target 'icatcher' from project 'icatcher') Unable to find module dependency: '_MediaPlayer_AppIntents' Not sure what to try and pull to fix this issue

Dear Apple Developer Team, On iOS 26, the contents of PDF pages appear to be swapped. Could you please advise if there is a workaround or a planned fix for this issue? Steps to Reproduce: Download the attached PDF on iOS 26. Open the PDF in the Files app. Tap the PDF to view it in Quick Look. Navigate to page 5. Expected Result: The page number displayed at the bottom should be 5. Actual Result: The page number displayed at the bottom is 4. Issue: This is not limited to page 5—multiple page contents appear to be swapped. I have also submitted feedback via Feedback Assistant (FB20743531) on October 20. Best regards, Yoshihito Suezawa

The introduction of PHBackgroundResourceUploadExtension is a welcome addition in iOS 26.1. I wonder however, how to attach a debugger and actually get the system to call the process() method of the extension. I tried to run the extension both inside photos app (and also the main app for testing), but when I take a photo or add photos to the library (saving), the process() method does never get called. Any hints would be appreciated to debug the PHBackgroundResourceUploadExtension during development.

Hello, As far as I know and in all of my testing there is no way for a user or a developer to change the frame rate of the video output on iPadOS. If you connect an iPad via a USB Hub or a USB to HDMI Adaptor and then connect it to an external monitor it will output at 59.94fps. I have a video app where a user monitors live video at 25fps and 30fps, they often output to an external display and there are times when the external display will stutter due to the mismatch in frame rate, ie. using 25fps and outputting at 59.94fps. I thought it was impossible to change the video output frame rate, then in V3.1 of the Blackmagic Camera App I saw an interesting change in their release notes: ‘Support for HDMI Monitoring at Sensor Rate and Resolution’ This means there is some way to modify it, not sure if this is done via a Private API that Apple has allowed Blackmagic to use. If so, how can we access this or is there a way to enable this that is undocumented? Thanks!

Please consider adding the ability to programatically download Premium and Enhanced voices. At the moment it is extremely inconvenient for our users, as they have to navigate to settings themselves to download voices. Our app relies heavily on SpeechSynthesis integration, and it would greatly benefit from this feature. FB16307193

Is it possible to stream video from a UVC (USB Video Class) camera on an iPhone 15? If so, are there any specific hardware or software requirements to enable this functionality?

Hey folks, I'm running into an odd issue suddenly with an app that had a working MusicKit integration before. I'm using ApplicationMusicPlayer to play Apple Music albums and songs. I'm testing on a physical device, signed in to Apple ID, and with a valid subscription. Apple Music via the first-party app works entirely fine on this device. Attempting to play back any content at all gives the log: <ICUserIdentityStoreACAccountBackend: 0x1070bf3e0> Failed to initialize primary apple account, error=Error Domain=ICError Code=-7013 "Client is not entitled to access account store" UserInfo={NSDebugDescription=Client is not entitled to access account store} [ICUserIdentityStore] - initializing account histories with activeAccountDSID = nil, activeLockerAccountDSID = nil, timestamp = 14605951908 [ICUserIdentityStore] Failed to fetch local store account with error: Error Domain=ICError Code=-7013 "Client is not entitled to access account store" UserInfo={NSDebugDescription=Client is not entitled to access account store}. The album artwork, track names, etc, all appear in the control center playback controls, but the music doesn't play. Trying to trigger playback with control center just results in it skipping to the next track, which doesn't play either. This exact code used to work. I have the MusicKit service selected in Apple Connect. Since this isn't entitlement-based, I'm not sure how else to check that I'm set up correctly. I've tried deleting/reinstalling the app, restarting the device, cleaning/rebuilding, and deleting DerivedData, to no avail. Any help? Running Xcode 16.4 (16F6), testing on iOS 18.5 (22F76)

I take that MusicKit JS is built with TypeScript, based on the attributions in the script: https://js-cdn.music.apple.com/musickit/v3/musickit.js In the script it points to https://js-cdn.music.apple.com/musickit/v1/acknowledgements.txt – I assume this should be the v3 URL for the v3 version? It returns the same content nonetheless. This contains attributions for TypeScript. Currently there's a third-party effort with DefinitelyTyped, which publishes the NPM package @types/musickit-js. The latest supported version available is v1. However, there is no version compatible with v3. This makes it hard to use MusicKit JS v3 in a TypeScript project. Please publish the types, ideally on the CDN along with the musickit.js file. Also consider publishing an officially Apple supported DefinitelyTyped package, or help to maintain the existing @types/musickit-js to make consuming this even easier.

Hi everyone, I’m exploring using the iPhone 17 Pro with the Blackmagic ProDock in a custom capture app. The genlock functionality seems accessible via AVExternalSyncDevice and related APIs, which is great. I’m specifically curious about external timecode coming in from the ProDock: • Is there a public way to access the timecode feed in a custom app via AVFoundation or another Apple API? • If so, what is the recommended approach to read or apply that timecode during capture? • Are there any current limitations or entitlements required to access timecode from ProDock in a third-party app? I’m excited to start integrating synchronized capture in my app, and any guidance or sample patterns would be greatly appreciated. Thanks in advance! — [Artem]