Hello, I'm getting this error when launching a SpriteKit Swift game in iOS 18+ on an iPhone 11 Pro, whose shell is partly damaged in the back: CHHapticEngine.mm:1206 -[CHHapticEngine doStartWithCompletionHandler:]_block_invoke: ERROR: Player start failed: The operation couldn’t be completed. (com.apple.CoreHaptics error 1852797029.) Haptics do not work on this device, due to the damaged shell, so some error — which obviously occurs when calling start(completionHandler:) — is definitely expected; what is not expected is the main thread sometimes blocking for up to 5 seconds — although the method is not called from the main thread... the error itself is always displayed from some other secondary (system) thread. During this time, the main thread does not access the haptics engine at all; on average, it blocks once every four or five launches. In each launch (blocking or not), the 'nope' error is displayed ~5 seconds after trying to start the engine. After going nuts with all kinds of breakpoints and instrumentation, I'm at a loss as to why the main thread would sometimes block... Ideas, anyone? Thank you, D.

Description: In the official visionOS 26 Hover Effect sample code project , I encountered an issue where the event.trackingAreaIdentifier returned by onSpatialEvent does not reset as expected. Steps to Reproduce: Select an object with trackingAreaID = 6 in the sample app. Look at a blank space (outside any tracking area) and perform a pinch gesture . Expected Behavior: The event.trackingAreaIdentifier should return 0 when interacting with a non-tracking area. Actual Behavior: The event.trackingAreaIdentifier still returns 6, even after restarting the app or killing the process. This persists regardless of where the pinch gesture is performed

i play Roblox and ever since I've got this update the quality graphics stability Internet ping and a lot of other stuff has drastically been worse

I have several games on the app store which are setup as "For Kids" which means these games cannot have any way to access the outside world including the App Store. No problem. These games have worked fine for years until iOS 26. Now, all my updates are being rejected because the new version of Game Center running on iPadOS 26 has a way for people to exit the game and go to the App Store. I have no control over this since it's built into Game Center, and the app review folks want me to put a "parental gate" on it, but there's no way to do that because... well... it's in Game Center, not my code. So, I'm unable to update my apps because of this. Presumably, the existing versions on the app store still do this exact same thing, so my update isn't going to make any difference. Does anyone know of a way to make that crap at the top go away so this isn't an issue?

I have a SPFx React application where I am printing the HTML page content using the javascript default window.print() functionality. Once I save the page as pdf from the print preview window and open it using Adobe Acrobat, the links(for eg -> Google) within the content are not clickable and appearing as plain text. I have tried to print random pages post searching with any keywords in Google and saved the files as pdfs, but, unfortunately, the links are still not clickable there as well. To check whether it is an Adobe Acrobat issue, I have performed the same print functionality from Android devices and shared the pdf file across the iOS devices and in that case, when opened using Adobe Acrobat, the links are appearing to be clickable. I am wondering whether it is something related to how the default print functionality works for iPadOS and iOS devices. Any insights on this would be really helpful. Thanks!!! Note: The links are clickable for MacOS as well as for Windows. #ios #ipados #javascript #spfx #react

Hello, Thank you for attending today’s Metal & game technologies group lab at WWDC25! We were delighted to answer many questions from developers and energized by the community engagement. We hope you enjoyed it and welcome your feedback. We invite you to carry on the conversation here, particularly if your question appeared in Slido and we were unable to answer it during the lab. If your question received feedback let us know if you need clarification. You may want to ask your question again in a different lab e.g. visionOS tomorrow. (We realize that this can be confusing when frameworks interoperate) We have a lot to learn from each other so let’s get to Q&A and make the best of WWDC25! 😃 Looking forward to your questions posted in new threads.

Hello, On macOS 26 (Tahoe), when building a OSX app that includes GameKit code, calling GKLocalPlayer.local.authenticateHandler shows the "Sign In to Game Center" alert (e.g. didShowFullscreenSignIn) — even if the app does not have the Game Center capability enabled or any related entitlement (com.apple.developer.game-center). This alert only appears when the user is not signed in to Game Center in system settings. However, when testing the same code path on iOS app built with macOS 26 (Tahoe), the alert does not appear unless the proper capability and entitlement are included. This behavior is different from macOS 15 (Sequoia) + Xcode 15.x. Prior to the update, Game Center features did not work at all even with the OSX app without Capability and Entitlements. Steps to Reproduce Create a new OSX app target (App Sandbox enabled, no Game Center capability). Add minimal GameKit code: GKLocalPlayer.local.authenticateHandler = { _, _, _ in } Build OSX app and run on macOS 26 (Tahoe). Ensure Game Center is signed out in System Settings. Observe: “Sign In to Game Center” alert appears automatically. Expected Behavior When Game Center capability and entitlement are not present, authenticateHandler should fail silently, and no signIn alert should appear. Actual Behavior On OSX app, the Game Center signIn UI appears even without any Game Center capability or entitlement. On iOS app, this alert does not appear. *Build Configuration: built with the same condition. (macOS 26 + Xcode 26) Question Could you please confirm whether this behavior is an intentional change in macOS 26 or a bug only for OSX apps in the GameKit authentication flow? Thank you.

I am building a MacOS desktop app (https://anukari.com) that is using Metal compute to do real-time audio/DSP processing, as I have a problem that is highly parallelizable and too computationally expensive for the CPU. However it seems that the way in which I am using the GPU, even when my app is fully compute-limited, the OS never increases the power/performance state. Because this is a real-time audio synthesis application, it's a huge problem to not be able to take advantage of the full clock speeds that the GPU is capable of, because the app can't keep up with real-time. I discovered this issue while profiling the app using Instrument's Metal tracing (and Game tracing) modes. In the profiling configuration under "Metal Application" there is a drop-down to select the "Performance State." If I run the application under Instruments with Performance State set to Maximum, it runs amazingly well, and all my problems go away. For comparison, when I run the app on its own, outside of Instruments, the expensive GPU computation it's doing takes around 2x as long to complete, meaning that the app performs half as well. I've done a ton of work to micro-optimize my Metal compute code, based on every scrap of information from the WWDC videos, etc. A problem I'm running into is that I think that the more efficient I make my code, the less it signals to the OS that I want high GPU clock speeds! I think part of why the OS is confused is that in most use cases, my computation can be done using only a small number of Metal threadgroups. I'm guessing that the OS heuristics see that only a small fraction of the GPU is saturated and fail to scale up the power/clock state. I'm not sure what to do here; I'm in a bit of a bind. One possibility is that I intentionally schedule busy work -- spin threadgroups just to waste energy and signal to the OS that I need higher clock speeds. This is obviously a really bad idea, but it might work. Is there any other (better) way for my app to signal to the OS that it is doing real-time latency-sensitive computation on the GPU and needs the clock speeds to be scaled up? Note that game mode is not really an option, as my app also runs as an AU plugin inside hosts like Garageband, so it can't be made fullscreen, etc.

What is Game Mode? Game Mode optimizes your gaming experience by giving your game the highest priority access to your CPU and GPU, lowering usage for background tasks. And it doubles the Bluetooth sampling rate, which reduces input latency and audio latency for wireless accessories like game controllers and AirPods. See Use Game Mode on Mac See Port advanced games to Apple platforms How can I enable Game Mode in my game? Add the Supports Game Mode property (GCSupportsGameMode) to your game’s Info.plist and set to true Correctly identify your game’s Application Category with LSApplicationCategoryType (also Info.plist) Note: Enabling Game Mode makes your game eligible but is not a guarantee; the OS decides if it is ok to enable Game Mode at runtime An app that enables Game Mode but isn’t a game will be rejected by App Review. How can I disable Game Mode? Set GCSupportsGameMode to false. Note: On Mac Game Mode is automatically disabled if the game isn’t running full screen.

I've loaded a ShaderGraphMaterial from a RealityKit content bundle and I'm attempting to access the initial values of its parameters using getParameter(handle:), but this method appears to always return nil: let shaderGraphMaterial = try await ShaderGraphMaterial(named: "MyMaterial", from: "MyFile") let namedParameterValue = shaderGraphMaterial.getParameter(name: "myParameter") // This prints the value of the `myParameter` parameter, as expected. print("namedParameterValue = \(namedParameterValue)") let handle = ShaderGraphMaterial.parameterHandle(name: "myParameter") let handleParameterValue = shaderGraphMaterial.getParameter(handle: handle) // Expected behavior: prints the value of the `myParameter` parameter, as above. // Observed behavior: prints `nil`. print("handleParameterValue = \(handleParameterValue)") Is this expected behavior? Based on the documentation at https://developer.apple.com/documentation/realitykit/shadergraphmaterial/getparameter(handle:) I'd expect getParameter(handle:) to return the value of the parameter, just as getParameter(name:) does. I've tested this on iOS 18.5 and iOS 26.0 beta 2. Assuming this getParameter(handle:) works as designed, is the following ShaderGraphMaterial extension an appropriate workaround, or can you recommend a better approach? Thank you. public extension ShaderGraphMaterial { /// Reassigns the values of all named material parameters using the handle-based API. /// /// This works around an issue where, at least as of RealityKit 26.0 beta 2 and /// earlier, `getParameter(handle:)` will always return `nil` when used to read the /// initial value of a shader graph material parameter read using /// `ShaderGraphMaterial(named:from:in:)`, whereas `getParameter(name:)` will work /// as expected. private mutating func copyNamedParametersToHandles() { for parameterName in self.parameterNames { if let value = self.getParameter(name: parameterName) { let handle = ShaderGraphMaterial.parameterHandle(name: parameterName) do { try self.setParameter(handle: handle, value: value) } catch { assertionFailure("Cannot set parameter value") } } } } }

Hi , My application meet below crash backtrace at very low repro rate from the public users, i do not see it relate to a specific iOS version or iPhone model. The last code line from my application is calling CAMetalLayer nextDrawable API. I did some basic studying, suppose it may relate to the wrong CAMetaLayer configuration, like frame property w or h <= 0.0 bounds property w or h <= 0.0 drawableSize w or h <= 0.0 or w or h > max value (like 16384) Not sure my above thinking is right or not? Will the UIView which my CAMetaLayer attached will cause such nextDrawable crash or not ? Thanks a lot Main Thread - Crashed libsystem_kernel.dylib __pthread_kill libsystem_c.dylib abort libsystem_c.dylib __assert_rtn Metal MTLReportFailure.cold.1 Metal MTLReportFailure Metal _MTLMessageContextEnd Metal -[MTLTextureDescriptorInternal validateWithDevice:] AGXMetalA13 0x245b1a000 + 4522096 QuartzCore allocate_drawable_texture(id<MTLDevice>, __IOSurface*, unsigned int, unsigned int, MTLPixelFormat, unsigned long long, CAMetalLayerRotation, bool, NSString*, unsigned long) QuartzCore get_unused_drawable(_CAMetalLayerPrivate*, CAMetalLayerRotation, bool, bool) QuartzCore CAMetalLayerPrivateNextDrawableLocked(CAMetalLayer*, CAMetalDrawable**, unsigned long*) QuartzCore -[CAMetalLayer nextDrawable] SpaceApp -[MetalRender renderFrame:] MetalRenderer.mm:167 SpaceApp -[FrameBuffer acceptFrame:] VideoRender.mm:173 QuartzCore CA::Display::DisplayLinkItem::dispatch_(CA::SignPost::Interval<(CA::SignPost::CAEventCode)835322056>&) QuartzCore CA::Display::DisplayLink::dispatch_items(unsigned long long, unsigned long long, unsigned long long) QuartzCore CA::Display::DisplayLink::dispatch_deferred_display_links(unsigned int) UIKitCore _UIUpdateSequenceRun UIKitCore schedulerStepScheduledMainSection UIKitCore runloopSourceCallback CoreFoundation __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ CoreFoundation __CFRunLoopDoSource0 CoreFoundation __CFRunLoopDoSources0 CoreFoundation __CFRunLoopRun CoreFoundation CFRunLoopRunSpecific GraphicsServices GSEventRunModal UIKitCore -[UIApplication _run] UIKitCore UIApplicationMain

Hi, I’m using the latest iPad Pro (13-inch) and I can see that Metal offers an rgb10a2unorm texture for rendering, but when I render a grey ramp and measure the actual luminance, I get a pattern that I would expect from an 8-bit texture (see below). Before I start ripping apart all my code, is there anything else I need to do to convince iOS to render my texture in 10-bit? I already tried setting the PixelFormat in my CMetalLayer to rgb10a2unorm, but that didn’t change anything.

Hello there, I'm having trouble matching what I see in the scenekit editor and the output of the resulting scene in a scnview. For a glitter effect I have set a high value on the diffuse intensity which looks fine in the editor but when running the game the colors are much darker. To see if the intensity value is merely capped I have set the same multiplier on the hat below - but it is blown out which looks to me like there is some grading going on I have tried to switch on hdr rendering but that didn't make a difference. I tried disabling linear rendering and that simply made everything darker still - which I expect. Does someone have an idea what else this could be? What rendering is the scenekit editor using and how can I match it? Interestingly when I take a screenshot of the editor window for this post, the image is also blown out... what is going on? :) Thanks so much for any pointers, Seb

I am using Unreal Engine 5.6 on a MacBook Pro with an M3 chip and macOS 15.5. I’ve installed Xcode and accepted the license, but Unreal is not detecting the latest Metal Shader Standard (Metal v3.0). The maximum version Unreal sees is Metal v2.4, even though the hardware and OS should support Metal 3.0. I’ve also run sudo xcode-select -s /Applications/Xcode.app and accepted the license via Terminal. Is there anything in Xcode settings, SDK availability, or system permissions that could be preventing access to Metal 3.0 features?"

TL;DR: RealityKit and Reality Composer Pro aren't forward or backward compatible with each other, and the resulting error message is terse and unhelpful. (FB14828873) So far, I've been sticking with Xcode 16.4 for development and only using Xcode 26.0 beta experimentally. Yesterday, I used xcode-select to switch to Xcode 26.0 beta 3 to test it, but I forgot to switch back. Consequently, this morning I unintentionally used the future Reality Composer Pro (the version included with Xcode 26) to make a small change to a USD file. Now I realize that if I'm unlucky, it's possible Reality Composer Pro may have silently introduced a small change into the USD file that may make RealityKit fail to read the file on iOS 18 and visionOS 2, which in the past has resulted in hours of debugging to track down the source of the failure, often a single line in the USD file that RealityKit can't communicate to me other than with the error "the operation couldn't be completed". As an analogy, this situation is as if, during regular development (not involving Reality Composer Pro), Xcode didn't warn you about specific API version conflicts, but instead failed with a generic error message, without highlighting the line in your Swift file that was the source of the error.

Hello RealityKit developers, I'm currently working on physics simulations in my visionOS app and am trying to adapt the concepts from the official sample Simulating physics joints in your RealityKit app. In the sample, a sphere is connected to the ceiling using a PhysicsRevoluteJoint to create a hinge-like simulation. I've successfully modified this setup to use a PhysicsSphericalJoint instead. The basic replacement works as expected: pin1 (attached to the sphere) rotates freely around pin0 (attached to the ceiling), much like a ball-and-socket joint should, removing all translational degrees of freedom. My challenge lies with the PhysicsSphericalJoint's angularLimitInYZ property. The documentation mentions that this property allows limiting the rotation around the Y and Z axes, defining an "elliptical cone shape around the x-axis of pin0." However, I'm struggling to understand how to specify these values to achieve a desired rotational limit. If I have a sphere that is currently capable of rotating 360 degrees around pin0 (like a free-spinning ball on a string), how would I use angularLimitInYZ to restrict its rotation to a certain height or angular range, preventing it from completing a full circle? Specifically, I'm trying to achieve a "swing" like behavior where the sphere oscillates back and forth but cannot rotate completely overhead or underfoot. What values or approach should I use for the angularLimitInYZ tuple to define such a restricted pendulum-like motion? Any insights, code examples, or explanations on how to properly configure angularLimitInYZ for this kind of behavior would be incredibly helpful! The following code is modified from the sample. extension MainView { func addPinsTo(ballEntity: Entity, attachmentEntity: Entity) throws { let hingeOrientation = simd_quatf(from: [1, 0, 0], to: [0, 0, 1]) let attachmentPin = attachmentEntity.pins.set( named: "attachment_hinge", position: .zero, orientation: hingeOrientation ) let relativeJointLocation = attachmentEntity.position( relativeTo: ballEntity ) let ballPin = ballEntity.pins.set( named: "ball_hinge", position: relativeJointLocation, orientation: hingeOrientation ) // Create a PhysicsSphericalJoint between the two pins. let revoluteJoint = PhysicsSphericalJoint(pin0: attachmentPin, pin1: ballPin) try revoluteJoint.addToSimulation() } } The following image is a screenshot of the operation when changing to PhysicsSphericalJoint. Thank you in advance for your assistance.

My app is being rejected and all I'm being told is that it is spam. I've tried improving various aspects of the game, but I just receive the same copy and paste rejection message each time. I have no idea if I'm moving in the right direction or what part of my game needs to be changed or improved. Is there a game quality benchmark document or some kind of resource I can use to better understand why my game is being rejected and how to bring it to a level that meets apple's standards.

Hi I have attempted to find a fix for my issue via documentation online and one phone support ( not code level support ) call to no end. I could continue to try various things but would like to see if someone else has encountered this issue and a fix for it. Background: My Game app is live on App Store and has 1 classic leaderboard . I am now getting ready to submit an update to the app and it also entails adding a new recurring leaderboard. I added the leaderboard in App Store. I however have NOT uploaded my new build yet. I have also not added my leaderboards ( currently live and not live ) to any set. When I try to submit scores using GKLeaderboard.submitScore(_:context:player:leaderboardIDs:completionHandler:) to the new non-live leaderboard it works ( gives me no error ) When I try to load the scores from the new non-live leaderboard GKLeaderboard.loadLeaderboards(IDs:completionHandler:) loadEntries(for:timeScope:range:completionHandler:) it fails. Error: "leaderboardID not found" I could try ( and will ) uploading the new build to AppStore connect and associating the new leaderboard to it before testing again. try associating each leaderboard to a set Is there anything else that I should be aware of ? Thanks in advance

I'm in the process of converting my SceneKit game to RealityKit. In SceneKit I used to be able to mark nodes as selected by setting SCNMaterial.emission with a custom color. I can do the same with PhysicallyBasedMaterial.emissiveColor, but I'd like to keep my entitities unaffected by the scene lights by using UnlitMaterial. In SceneKit I can set a category mask to indicate what light should affect what node, but there doesn't seem to be such a thing in RealityKit. So at the moment it seems like I have to choose between being able to mark an entity as selected, or having entities unaffected by lighting, but not both. Is there some effect or component I can use to mark entities as selected by applying some coloring regardless of the material used?

I'm building a game with a client-server architecture. Using GKMatch.chooseBestHostingPlayer(_:) rarely works. When I started testing it today, it worked once at the very beginning, and since then it always succeeds on one client and returns nil on the other client. I'm testing with a Mac and an iPhone. Sometimes it fails on the Mac, sometimes on the iPhone. On the device that it succeeds on, the provided host can be the device itself or the other one. I created FB9583628 in August 2021, but after the Feedback Assistant team replied that they are not able to reproduce it, the feedback never went forward. import SceneKit import GameKit #if os(macOS) typealias ViewController = NSViewController #else typealias ViewController = UIViewController #endif class GameViewController: ViewController, GKMatchmakerViewControllerDelegate, GKMatchDelegate { var match: GKMatch? var matchStarted = false override func viewDidLoad() { super.viewDidLoad() GKLocalPlayer.local.authenticateHandler = authenticate } private func authenticate(_ viewController: ViewController?, _ error: Error?) { #if os(macOS) if let viewController = viewController { presentAsSheet(viewController) } else if let error = error { print(error) } else { print("authenticated as \(GKLocalPlayer.local.gamePlayerID)") let viewController = GKMatchmakerViewController(matchRequest: defaultMatchRequest())! viewController.matchmakerDelegate = self GKDialogController.shared().present(viewController) } #else if let viewController = viewController { present(viewController, animated: true) } else if let error = error { print(error) } else { print("authenticated as \(GKLocalPlayer.local.gamePlayerID)") let viewController = GKMatchmakerViewController(matchRequest: defaultMatchRequest())! viewController.matchmakerDelegate = self present(viewController, animated: true) } #endif } private func defaultMatchRequest() -> GKMatchRequest { let request = GKMatchRequest() request.minPlayers = 2 request.maxPlayers = 2 request.defaultNumberOfPlayers = 2 request.inviteMessage = "Ciao!" return request } func matchmakerViewControllerWasCancelled(_ viewController: GKMatchmakerViewController) { print("cancelled") } func matchmakerViewController(_ viewController: GKMatchmakerViewController, didFailWithError error: Error) { print(error) } func matchmakerViewController(_ viewController: GKMatchmakerViewController, didFind match: GKMatch) { self.match = match match.delegate = self startMatch() } func match(_ match: GKMatch, player: GKPlayer, didChange state: GKPlayerConnectionState) { print("\(player.gamePlayerID) changed state to \(String(describing: state))") startMatch() } func startMatch() { let match = match! if matchStarted || match.expectedPlayerCount > 0 { return } print("starting match with local player \(GKLocalPlayer.local.gamePlayerID) and remote players \(match.players.map({ $0.gamePlayerID }))") match.chooseBestHostingPlayer { host in print("host is \(String(describing: host?.gamePlayerID))") } } }