I'm struggling to build a driver for iPadOS in a particular project configuration. If I put the driver code and dext target into the same Xcode project which contains the iPad app, all is well. This is the way the Xcode driver template does it. However, I'd like to build and debug the dext on macOS, while eventually deploying on iPadOS. So I put the dext into a different project, which has a macOS target, a minimal iPadOS target and a DriverKit target. I made a workspace which contains both projects. I dragged the macOS project into the iPadOS project so that I can refer to the products of the macOS project (specifically, its driver target) as a dependency of the iPadOS target. Note that the main iPad app target depends on the driver target. So the workspace organization looks like this: Workspace iPad project main iPad app target (depends on driver) test project reference test project test macOS/iPad app target DriverKit dext target When I build the iPadOS target, it builds the dependent driver target in the macOS project, but it fails to link because Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/15.0.0/lib/darwin/libclang_rt.profile_driverkit.a is not found. If I just build the driver target directly in Xcode, there is no such complaint. I looked closely at the build logs, and I see for the failed link, there are these two linker flags set which are not set in the successful case -debug_variant -fprofile-instr-generate I can't seem to control the generation of this flag. I tried turning off the Profile switch in the Scheme editor for the driver, but is makes no difference. When I directly build the driver target, no -fprofile-instr-generate is set and it compiles and links. When i build the driver as a dependency of another target, -fprofile-instr-generate is passed to the linker, which fails. The obvious workaround is to put the driver source code into a separate driver target in the iPadOS project, but I'd rather have just one DriverKit driver for both platforms, with a few settings (such as bundle ID) controlled by a configuration file. Has anyone else encountered this problem, and know of a workaround?

I'm working on dext project (c++), Base SDK and Supported Platforms are set to DriverKit. #include causes errors: error "The iostreams library is not supported since libc++ has been configured without support for localization." error "<locale.h> is not supported since libc++ has been configured without support for localization." Also it's not possible to define custom log object: undeclared identifier 'os_log_create'. <os/log.h> included and os_log function is compiled correct. macOS as additional SDK did not help. Thanks a lot for any hint.

It would be nice for Apple to integrate chatgpt, Open AI, and create their own artificial intelligence. Siri is not equipped to answer questions that AI can. With increasing AI prevalence and usability, Apple is behind. Message to Apple: PLEASE UTILIZE AI TO MAKE APPLE THE BEST PLATFORM.

I'm trying to write performance tests with Xcode 15, but it's not working: even though setting a baseline seems to work (baseline data files are created), Xcode seems to ignore that baseline altogether whenever the test is run. As a result, performance tests never fail, no matter how bad performance gets. The source editor persistently displays a “No baseline average for Time” message. Has anyone else encountered this? Figured out how to sidestep the issue? Of note, the issue is easily reproduced: create a new (macOS in my case) app project with tests, add a dummy performance test; run the test once and save its baseline, and despite this subsequent tests will always succeed, even if you significantly slow the dummy test down. (I've filed this as FB13330139)

I'm trying to run my app on my iPhone and XCode is unable to detect it. Versions (as of time of writing, these are all the latest versions) XCode: 15.0.1 iOS: 17.1.2 macOS: Sonoma 14.1.2 What I've tried Updating all hardware to the latest versions. Restarting all hardware. Clearing cache/derived data. Using different USBC ports/cables. Using the XCode 15.1-Beta 3 (the latest beta) Clearing trusted computers and re-trusting Disabling Multipath Networking (solution for someone else on the dev forums) Creating a brand new xcode project. Disabling all wifi/bluetooth and reconnecting Using different wifi networks Calling mac support (they directed me back here) Scouring forums What happens I start by disconnecting my phone from my computer, clear trusted computers, restart xcode, and start (basically) from a completely blank slate. First I open XCode to my project. Then I connect my iPhone via USBC. I see that XCode says "iPhone not eligible while pairing in progress" (or something like that). I see on my phone that I must trust this computer, I hit trust, I enter my phone's passcode, then that disappears on my phone, and in XCode the message about eligibility disappears. I then click on the device selector to choose between either a simulator or a hardware device and under hardware I only see a message that says "No eligible devices connected to my mac". If I open the "Manage Run Destinations" organizer I see all the simulators there in the simulators tab, but when I go to the Devices tab, I see nothing. Sometimes when I go through this process, I can get a banner to appear up top, but still no device shows up on the left. The banner will show me that it is indeed my iPhone, but it will be missing information like "Serial Number" or "Capacity". Here's a screenshot of what I see. Keep in mind, this banner up top does not always show up when I go through this process. iPhone CAN be detected on my other laptop When I do this exact same thing on my other laptop, everything works just fine. Here are the specs I'm running on that laptop. (using the same cable/wifi network/etc) XCode 15.0.1 macOS: Ventura 13.6.1 iPhone 17.1.2 (I'm using the same iPhone) The only difference here being the macOS version. However, the problem started on my "broken" computer while I was running a previous major macOS version. This problem is actually what prompted my to do a system update to Sonoma. Please for the love of god, halp!!!

We got an app for iPad which has two targets one for the App itself (MainApp target ) and another one for the Driver ( Driver Target ) using DriverKit. The app works fine in Development, but I'm trying to distribute it with adhoc. I've requested the Distribution Entitlement to Apple, after getting it, the App Id for the Driver has the following Capabilities: DriverKit, DriverKit (development), DriverKit USB Transport (development), DriverKit USB Transport - VendorID, In-App Purchase Now in the profile section, I've created a adhoc profile for the Driver AppId (Identifier). Obviously I've also created an Adhoc profile for the Main AppId Finally in the Signing & Capabilities Section I set up the profiles for MainApp target, int the Debug one I set up the Development one and int the Release one I set up the adhoc one. I do the same in the Driver Target, but when I set up the Adhoc one in the Release, I've got a warning: Xcode 14 and later requires a DriverKit development profile enabled for iOS and macOS. Visit the developer website to create or download a DriverKit profile Also interestingly the Signing Certificate section says: None I also set up the Capabilities for the Driver Target: DriverKit USB Transport - VendorID DriverKit USB Transport ( Development ) Inside these capabilities I set up the vendor ID as dictionary The problem is, if I try to Archive the app I will get the previous Warning message as error: Xcode 14 and later requires a DriverKit development profile enabled for iOS and macOS. Visit the developer website to create or download a DriverKit profile. Any idea what I'm missing? Thanks

Ever since Xcode 15 and iOS 17 came out development has quite often been a nightmare of waiting and waiting -Xcode displaying endless circles saying preparing the device, connecting to the device, installing the device. But recently to add to this, installation and launching is just taking really forever. I'm currently running Xcode 15.1 and various versions of iOS 17 (I have several phones) and installing the app from Xcode takes about 7 - 10 minutes (compared to the same app installing in seconds with Xcode 14 for example). Then once its finally installed, it then takes further minutes to launch, Xcode often actually displays a dialog saying its taking longer than expected to launch the app, adding the footnote "LLDB is likely reading from device memory to resolve symbols." What could be reasons, and solutions, for the excruciatingly slow installation time, and launch time? I really need to find a solution to this please - making a code change tweak, running, making another, running, making another, running, just isn't possible given the length of time it takes to install and launch each time. The iPhone is connected via physical cable to the Mac, and the Mac and iPhone are both on the same Wifi network. Xcode 15.1 M1 Macbook Pro Sonomo 14.0 iOS 17.2

Hello. I'm seeing an inconsistent behavior where breakpoints I set in my (Swift) iOS app behave normally when I'm debugging on a device or on a simulator running iOS 17.x, but when I try using simulators of iOS 16 or 15 the breakpoints get ignored completely. I also observe that the breakpoints remain solid blue and do NOT adopt the dotted blue outline, as experienced by other users. I've seen a few posts on here and on SO about the general issue of ignored breakpoints (with no conclusive answer AFAIK), but I haven't seen any where the behavior varies with the SDK being used. The behavior is repeatable and predictable (within the same app at least). I am not adding the breakpoints after building/running, and I'm sure the logic reaches the lines with the breakpoints (and again, whenever I switch to an iOS 17 simulator, execution does pause as expected with the exact same breakpoints). Things I've tried and looked into: Clean up project build folder Delete and re-install simulators (iOS 16.4 and 15.5) Deleted the entire derived data directory, as well as the CoreSimulator one. Confirm the build configuration is Debug, and the "Debug executable" option is checked. inspect various build flags mentioned in other posts: {Swift compiler - Code generation - Optimization level - Debug: -0none; Debug information format: DWARF (I also tried DWARF with dSYM with no impact)}. Most of my settings are on the plain vanilla/out of the box side, with only a couple of SPM dependencies, and I've been maintaining the same app for about 5 years and don't think I've come across this behavior before. Currently using Xcode 15.1. Deployment target is 14.0. Thank you.

Hello everyone! When I run UI Tests on Xcode Cloud, I often encounter unexpected failures. Checking the screen recording, I found that the iOS Simulator could go into a black screen with a white Apple logo and a progress bar for a period after the test starts. This behavior of the Simulator causes my app's UI Tests to fail randomly, which greatly affects the practical use of UI Tests. I suspect this phenomenon is unrelated to my app and test cases, so I'm asking if anyone else has encountered a similar issue. 🤔

I created a package using "File > New > Package" and now I want to add a new Asset Catalog to this package. With my package selected in the project navigator I select "File > New > File" but it creates a Swift file instead of showing the Template Selection dialog Ref: https://developer.apple.com/documentation/xcode/managing-assets-with-asset-catalogs#Create-a-new-asset-catalog

Everytime when iOS simulator is launched I het a lot of repeated "*** quit unexpectedly" alerts. Where "***" is a mix of "managedappdistributiond","healthappd", and "findmylocated" Even after the simulator is launched I still het random "*** quit unexpectedly" alerts. Very annoying because the alerts deactivates the active window This is on an MacBook Pro M3 Max,, Xcode 15.2, Sonoma 14.2.1, it also happens with Xcode 15.1 A co developer (MacBook Pro M1 Max,Xcode 15.2, Sonoma 14.2.1) does not have the issue Any idea how I can prevent this from happening? Update Every mentioned service crash happens in libswiftCore.dylib at 0x1929f3938 assertionFailure(:_:file:line:flags:) + 248

I have an AppleTV app which I released in 2016. I've updated it and released a new version every year without much hassle. This year, with tvOS 17.2, the layered app icon isn't working right. This is a two-layer image made with PNGs. When it's selected, it looks right and the layers move correctly: But when it's not selected, the background layer disappears: Screenshots are from the simulator but it also happens on the device. It's inconsistent; sometimes it's the front layer that disappears. Occasionally both layers work, but I can't tell why. I've spent a day trying everything. Very frustrated. The icon previews correctly in Xcode and in Parallax Viewer. The image sizes are correct: 400 x 240 for Small, 800 x 480 for Small@2x, 1280 x 768 for Large. The back layer is a non-transparent PNG. I tried adding a Large@2x set. Didn't help. Originally I had a three-layer image with no middle layer PNG. I deleted the empty middle layer, but that didn't help. All the PNG files are from GnuIMP. Same color space, even. I was using the filenames tvicon-back-s.png and tvicon-back-s@2x.png. I tried taking out the @ sign in case that was confusing Xcode. (It never has before, but I am flailing here.) Anybody have any clues? If it's an Apple bug and there's nothing I can do, I'm going to just push the release button and hope it fixes itself someday.

xcode 15.2, mac m2 mini, 14.2.1 sonoma i need a pdf file to stage my app for screen shots for the market. icloud wont sync, cant drag files to the home screen or any screen, it just does not work. i am at the end of my rope here, i just need some screen shots, my app is approved and ready am i wrong>? is there a way to do this or is it just broken now in the name of (lazy) security? edit--the more i read the more i angry and frustrated i get. this is broken and will not be fixed. i need to just workaround via email. so happy my second 100 dollar developer subscription bill is coming up!

Hello, I'm trying to use devicectl to observe Darwin Notifications on my iPhone. Instructions: OVERVIEW: Observe a Darwin notification on a device. Note that this command will wait for 300 seconds by default before exiting. You can override this by providing a different --timeout value. USAGE: devicectl device notification observe --device <uuid|ecid|udid|name> --name <name> ... [--verbose] [--quiet] [--timeout <seconds>] [--json-output <path>] [--log-output <path>] DEVICE OPTIONS: -d, --device <uuid|ecid|udid|name> The identifier, ECID, UDID, or name of the device. COMMAND OPTIONS: --name <name> The name of the Darwin notification. This can be passed multiple times to observe multiple Darwin notifications. OUTPUT OPTIONS: -v, --verbose If given, provide more logging output than normal. -q, --quiet If given, output will include only errors. -t, --timeout <seconds> The overall command timeout in seconds. If this limit is exceeded the command is abandoned as a failure. -j, --json-output <path> An optional path to write a JSON file with command results. Note: JSON output to a user-provided file on disk is the ONLY supported interface for scripts/programs to consume command output. -l, --log-output <path> An optional path to write all logging otherwise passed to stdout/stderr. OPTIONS: --version Show the version. -h, --help Show help information. Executed command: xcrun devicectl device notification observe --device XXX --name com.example.Notification Result: Darwin notification observation started. 300.0 seconds remaining: On iOS, I'm posting a Darwin notification using: CFNotificationCenterPostNotification(center, CFNotificationName("com.example.Notification" as CFString), nil, nil, true) My CFNotificationCenterAddObserver on iOS does receive this notification. But the devicectl does not. Also no results when I remove the observer on iOS. How can I send a notification in such a way that it is picked up by the devicectl observer?

I want to use a ci_script to change the CI_BUILD_NUMBER to a new value. But in XCODE CLOUD there seems to be no programmatic way to change it?

It looks like the other thread got locked. I would still like to be able to uncheck the box for "Connect via network" so I can develop with my iOS 17+ devices normally with Xcode 15. Or a method to use Xcode 14 with iOS 17+ without CoreDevice or whatever the problematic API is.

Hello! I've been trying to automate tests using Appium/XCUITests in a React Native APP, but I'm finding many blockers. They are related to the amount of nested elements in the "DOM" in which the XCUItest can not go deeper to get all the elements we need. snapshotMaxDepth -> The XCUITest does not support more than 60 value, otherwise it returns the following error: Got response with status 404: {"value":{"error":"stale element reference","message":"The previously found element "Application 'xyz.xxx.xxx'" is not present in the current view anymore. Make sure the application UI has the expected state. Original error: Error kAXErrorIllegalArgument getting snapshot for element <AXUIElementRef 0x600003aaf750> {pid=95967} {uid=[ID:1 hash:0x0]}","traceback":"(\n\t0 CoreFoundation 0x00007fff20405604 __exceptionPreprocess + 242\n\t1 libobjc.A.dylib 0x00007fff201a4a45 objc_exception_throw + 48\n\t2 WebDriverAgentLib 0x000000010a3caa53 -[XCUIElement(FBUtilities) fb_takeSnapshot] + 723\n\t3 WebDriverAgentLib 0x000000010a3cad07 -[XCUIElement(FBUtilities) fb_snapshotWithAttributes:maxDepth:] + 183\n\t4 WebDriverAgentLib 0x000000010a37baea +[FBXPath writeXmlWithRootElement:indexPath:elementStore:includedAttributes:writer:] + 778\n\t5 WebDriverAgentLib 0x000000010a37b12c +[FBXPath xmlRep... But if I inform less than 60, the XCUITest is not able to get all the elements we need to automate: There are many threads about this, all of them the issue is in the XCUITest: https://github.com/appium/appium/issues/14825 https://discuss.appium.io/t/handling-staleelementreferenceexception/35095/11 https://github.com/appium/appium/issues/18085 https://discuss.appium.io/t/error-in-appium-desktop-refreshing-source-after-adding-snapshotmaxdepth-greater-than-62/34058 https://stackoverflow.com/questions/74235441/appium-cant-reach-elements-in-ios-source-tree-they-are-too-deep-works-fine-in Tested all possible solutions suggested in the threads, but I will have the issue.

Lately, I keep getting this warning when closing Xcode asking if I want to save the changes. Strangely enough, I have never received this before. I looked to see if I could disable and enable autosave. Unfortunately I have not found anything. Does anyone have any tips?

We are received the following error while uploading the application into TestFlight. **ITMS-90714: Invalid binary - The app contains one or more corrupted binaries. Please rebuild the app and resubmit. ** After sometimes we submit the same application without changing the configurations application submitted successfully into the App Store. We are using the Xcode 15.3 version.

Hello everyone, I am encountering a persistent issue with Xcode where I’m unable to install my app on a testing device due to the following error message: Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.SznYNY/extracted/iForC.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) Here’s what I have tried so far to resolve this issue: 1. Ensured that all my certificates and provisioning profiles are current and valid. 2. Removed all related certificates from my Keychain and reinstalled new ones. 3. Cleaned and rebuilt the project multiple times. 4. Unpaired the device and paired it again. 5. Reinstalled the latest version of Xcode. 6. Performed a complete restore of my Mac. Despite these troubleshooting steps, I am still facing the same issue. I would greatly appreciate any insights or experiences related to this error from anyone who has overcome similar challenges. Thank you in advance for your help!