I am encountering an issue where the application running on a physical device does not reflect the most recent source changes. Observed behavior On the device, the application behaves as if an older binary is running. Specifically: Newly added debug UI labels do not appear. The logs still show old debug prints instead of new ones. Steps taken to ensure a clean install: Changed the bundle identifier Set a new display name (the app still showed the old display name when I click run). Deleted the app manually from the device before every reinstall. Build and install steps Performed multiple clean builds with a fresh Derived Data path. Built from terminal using xcodebuild (Debug configuration, physical device target, automatic provisioning). Installed using: xcrun devicectl device install app Verified: The updated source files are listed under Compile Sources and compiled from the expected path. The bundled Info.plist includes the new bundle identifier and display name. Installation output confirms new bundle identifier. Question What could cause a newly built and installed application to run with behavior from an older binary? Are there recommended ways to verify that the device is actually launching the latest installed build, and to ensure stale binaries are not being executed? Any guidance on additional diagnostics or misconfigurations to check would be appreciated.

I am developing an iOS in-app SDK for collecting code coverage data. The SDK writes coverage data to a specified file by calling __llvm_profile_set_filename and __llvm_profile_write_file. This implementation worked correctly until I switched to Xcode 26.0 to build my project. Now, when __llvm_profile_write_file() is executed, it crashes with the following error stack. Can anyone provide any assistance? Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Subtype: KERN_INVALID_ADDRESS at 0x0000000000000001 Exception Codes: 0x0000000000000001, 0x0000000000000001 Termination Reason: Namespace SIGNAL, Code 11, Segmentation fault: 11 Terminating Process: exc handler [454] Thread 96 name: Dispatch queue: com.test-coverage.processing Thread 96: Crashed: 0 Demo 0x122602ea8 initializeValueProfRuntimeRecord (in Demo) (InstrProfilingValue.c:351) 1 Demo 0x00000001226064c0 writeOneValueProfData (in Demo) (InstrProfilingWriter.c:153) 2 Demo 0x0000000122606308 writeValueProfData (in Demo) (InstrProfilingWriter.c:234) 3 Demo 0x00000001226060d0 lprofWriteDataImpl (in Demo) (InstrProfilingWriter.c:401) 4 Demo 0x0000000122605d98 lprofWriteData (in Demo) (InstrProfilingWriter.c:261) 5 Demo 0x0000000122604804 writeFile (in Demo) (InstrProfilingFile.c:536) 6 Demo 0x122604664 __llvm_profile_write_file_alias + 228 7 Demo 0x000000011c6dd108 -[BDTestCoverage p_dumpMainCoverageInfoWithCustomKey:] (in Demo) (TestCoverage.m:995) 8 Demo 0x000000011c6dcef8 -[BDTestCoverage p_dumpAllCoverageProfileWithCustomKey:] (in Demo) (TestCoverage.m:970)

I am trying to add promotional offers in my iOS App. The signature is being verified through a google cloud function. My user id, signature, and product and offerIds return perfect. Promotional offer appears in the payment sheet as well. When applying for payment, the "ding" sound comes as well. But then I get the UIAlert with Unable to Purchase Contact developer. Error code in logs is 3903

Hey guys! I downloaded Apple’s Icon Composer to build my iOS 26 app icon. I exported my SVG from Illustrator (and verified it through Canva and the W3C validator). However, when I import it into Icon Composer, it looks really weird . There are these bubble-like artifacts appearing in the center. Here's my orignal svg icon file trace-logo.txt Any help will be appreciated! Best, Justin

開発アプリで通知確認を行うため、UDIDをプロビジョニングプロファイルに追加する必要があります。 iPhoneのUDIDは取得することができたのですが、AppleWatchのUDIDを取得する方法が分かりません。 Xcodeと接続してUDIDを取得しようとしましたが、iPhoneのみ認識がされAppleWatchが認識されていません。 AppleWatchもデベロッパモードをONしなければならないとAppleから返答をもらったが、その方法がわからないのでどなたかご教授お願い致します。

I am a solo developer building a cross-platform voice assistant app using Capacitor (with HTML, JS) and Xcode for the iOS version. The app is called "Echo Eyes," and it already functions well as a Progressive Web App (PWA). However, the iOS build has been completely blocked due to persistent sandbox permission errors from macOS during the CocoaPods framework embedding phase. This issue has caused severe disruption to my project and personal well-being, and I am writing to formally request assistance in identifying a clear solution. I am not a beginner and have followed all known best practices, forums, and Apple guidance without success. What I’ve Built So Far: Fully working PWA version of the app (voice input, HTML/JS interface) Capacitor initialized with ID: com.echo.eyes.voice Capacitor iOS platform added with CocoaPods App runs fine until Xcode reaches: [CP] Embed Pods Frameworks The Exact Problem: Sandbox: bash(12319) deny(1) file-read-data /Users/Shared/projects/Echo_Mobile/ios/App/Pods/Target Support Files/Pods-App/Pods-App-frameworks.sh Command PhaseScriptExecution failed with a nonzero exit code Clarification: This is not an HTML/JS issue. The failure occurs in Xcode long before web assets are embedded into the bundle. The shell script /Pods-App-frameworks.sh cannot be read due to macOS sandbox restrictions. Everything I’ve Tried: Gave Xcode and Terminal Full Disk Access Ran: sudo xattr -rd com.apple.quarantine on the entire Pods directory Added /bin/bash and /bin/sh to Full Disk Access (after confirming the exact shell via $SHELL) Attempted to disable Gatekeeper via Terminal: sudo spctl --master-disable (confirmed not effective without GUI toggle) Tried relocating project to /Users/Shared/projects/ Cleaned build folder, removed derived data, reinstalled pods Debugged shell usage with: echo "▶️ Embedding under shell: $SHELL" in the [CP] Embed Pods Frameworks script Attempted to grant shell access to Documents Folder, Desktop, and more via Files & Folders Current State: Despite following all known and recommended steps, Xcode continues to return the same sandbox error. The shell script that embeds the CocoaPod frameworks is denied permission to read its own contents by macOS. What I Am Asking For: Is this a known issue in current versions of macOS or Xcode regarding sandbox denial for shell execution inside Pods? Is there a recommended method to grant /bin/bash or /bin/sh permission to read and run these scripts under Xcode without compromising system security? Is moving the project outside /Users (e.g. to /Projects) the only real workaround? Are there official Apple workarounds or entitlements available for developers encountering this? Personal Note: This issue has caused significant emotional and physical distress. I’m building this app as a personal healing tool and companion. I’ve poured months of work into this and done everything I can to follow Apple’s development guidelines. I’m not asking for hand-holding — only a clear, respectful response confirming whether this is expected behavior and what can be done to resolve it. Thank you for your time and understanding.

Merhaba, iOS üzerinde bir sözleşme onay uygulaması geliştiriyorum. Kullanıcıların dijital ortamda sözleşmeleri okuyup onaylaması gerekiyor. Ancak hukuki geçerlilik konusunda bazı tereddütlerim vardı. Bursa’da yaşayan biri olarak bu konuda bir avukata danışmam gerekti. Şans eseri https://www.avukatcanata.com ile karşılaştım ve hem bireysel hem ticari sözleşmeler konusunda gerçekten çok net açıklamalar sundular. Özellikle elektronik imza ve KVKK uyumu hakkında verdikleri bilgiler sayesinde projemi yasal zemine oturtabildim. Eğer bu tarz uygulamalar geliştiriyorsanız, mutlaka bir hukukçu görüşü alın. Yanlış bir adım size veya kullanıcınıza ciddi sonuçlar doğurabilir. Teşekkürler 🍏

In our Unity App for iOS build, when we opened the PDF from the app, it is automatically opening in landspace mode instead of portrait. In the android and windows apps, we are able to open in the portrait mode. We tried to make the changes in the project settings but it did not change. Any way in which we can acheive this would be helpful for us.

i have been added to an apple membership organization, and given App manager's rights b ut my build keeps failing and asking me to get more access

I am located in Taiwan and recently updated my Mac to the latest OS and installed the newest Xcode. However, I’m experiencing extremely slow download speeds when trying to add the iOS 26.2 Simulator Runtime (approx. 8GB) via Xcode > Settings > Platforms. It is currently downloading at a rate of only 500MB per hour, which is impractical. I have checked the official downloads page but couldn't find a standalone DMG link for this specific version. My questions are: Is there a direct download link (DMG) available on the Apple Developer portal for the iOS 26.2 Simulator? If no direct link exists, are there any recommended methods to accelerate the download? (e.g., using terminal commands or changing DNS settings). Any help or direct URLs would be greatly appreciated. Thank you!

I am running Appium tests on an iOS 18 simulator, and I am encountering an intermittent issue where the device screen gets locked unexpectedly during the tests. The Appium logs show no errors or unusual activity, and all commands appear to be executed successfully. However, upon reviewing the device logs, I see entries related to the lock event, but the exact cause remains unclear. SpringBoard: (SpringBoard) [com.apple.SpringBoard:Common] lockUIFromSource:Boot options:{ SBUILockOptionsLockAutomaticallyKey: 1, SBUILockOptionsForceLockKey: 1, SBUILockOptionsUseScreenOffModeKey: 0 } SpringBoard: (SpringBoard) [com.apple.SpringBoard:Common] -[SBTelephonyManager inCall] 0 SpringBoard: (SpringBoard) [com.apple.SpringBoard:Common] LockUI from source: Now locking Has anyone experienced similar behavior with Appium on iOS 18, or could there be a setting or configuration in the simulator that is causing this issue?

I’m using Developer iOS app to watch WWDC session videos. i notice it doesn’t record a video as watched after I watched it and even manual marking it using Mark as Watch has no effect. I remember the issue started several years ago because some old WWDC videos were marked watches.

Hi, is there a compiled version of MailCore.swift? I want to build an easy-to-use mail app for my mother, who is 97, has a MacBook Air, but Apple Mail is too complicated for her. chatGPT said I am too stupid to compile it by myself. Regards Stephan

Hi Support Team, I am new here. I am unable to add my fonts to the asset catalog there is no option to add new font set when I click the plus sign. When I drag my files in they show up as data. I have a Contents.json in the font folder called BeVietnamProFont.font. Is there something I am doing wrong? Thanks SO much! { "info": { "version": 1, "author": "xcode" }, "properties": {}, "fonts": [ { "filename": "BeVietnamPro-Black.ttf", "weight": "black", "style": "normal" }, { "filename": "BeVietnamPro-BlackItalic.ttf", "weight": "black", "style": "italic" }, { "filename": "BeVietnamPro-Bold.ttf", "weight": "bold", "style": "normal" }, { "filename": "BeVietnamPro-BoldItalic.ttf", "weight": "bold", "style": "italic" }, { "filename": "BeVietnamPro-ExtraBold.ttf", "weight": "heavy", "style": "normal" }, { "filename": "BeVietnamPro-ExtraBoldItalic.ttf", "weight": "heavy", "style": "italic" }, { "filename": "BeVietnamPro-ExtraLight.ttf", "weight": "ultralight", "style": "normal" }, { "filename": "BeVietnamPro-ExtraLightItalic.ttf", "weight": "ultralight", "style": "italic" }, { "filename": "BeVietnamPro-Light.ttf", "weight": "light", "style": "normal" }, { "filename": "BeVietnamPro-LightItalic.ttf", "weight": "light", "style": "italic" }, { "filename": "BeVietnamPro-Regular.ttf", "weight": "regular", "style": "normal" }, { "filename": "BeVietnamPro-Italic.ttf", "weight": "regular", "style": "italic" }, { "filename": "BeVietnamPro-Medium.ttf", "weight": "medium", "style": "normal" }, { "filename": "BeVietnamPro-MediumItalic.ttf", "weight": "medium", "style": "italic" }, { "filename": "BeVietnamPro-SemiBold.ttf", "weight": "semibold", "style": "normal" }, { "filename": "BeVietnamPro-SemiBoldItalic.ttf", "weight": "semibold", "style": "italic" }, { "filename": "BeVietnamPro-Thin.ttf", "weight": "thin", "style": "normal" }, { "filename": "BeVietnamPro-ThinItalic.ttf", "weight": "thin", "style": "italic" } ] } ![]("https://developer.apple.com/forums/content/attachment/56835f04-d1c1-468f-808b-9a786562d367" "title=Screenshot 2025-07-13 at 1.05.05 PM.png ;width=539;height=630")

Hey, I am using the terminal a lot. Since I updated to Sonoma (so, really a long time ago). My prompt or more precise the hostname always changes between three states. Sometimes it is username@Macbook-Pro-of-XXX, sometimes username@MacbookPro and sometimes it's username@xxxxxxxx-yyyy-zzzz-aaaa-bbbbbbbbbbbb. The latter is probably my UUID. Does anyone have a clue why this randomly changes?

I'm trying to authenticate to a git host using SSH keys stored in 1Password. I have ~/.ssh/config with mode 600 set with a symlink: Host * IdentityAgent "~/.1password/agent.sock" But ssh-add -l shows no identities. If I set $SSH_AUTH_SOCK, ssh-add -l works just fine. I'd love to not have to do this, though. Why doesn't ssh-add seem to read ~/.ssh/config? The built-in version is OpenSSH_10.0p2, LibreSSL 3.3.6. I've searched fruitlessly for an answer anywhere else.

Hello Apple community ! Not here to report an issue but I just wanted to make a suggestion ^^ I feel like a common frustration amongst developers is the lack of transparency over bugs filed on developer tools, SDKs, iOS versions, the whole Apple ecosystem really. This leads to the creation of parallel bug tracking tools (https://github.com/feedback-assistant/reports?tab=readme-ov-file / https://openradar.appspot.com/page/1) or filing of duplicates for reports that may already exist and are being worked on. I feel like this would save time for both external developers that encounter bugs & Apple engineers that have to look for possible duplicates to share a common public database of issues. Other companies have this kind of system in place (Google for example : https://issuetracker.google.com/) so why not Apple ? Thank you

I have a project inside the project structure. I have around 300 unit tests in the project. I see that for some of the subprojects, the coverage numbers show up correctly, but for other subprojects and the main project, the coverage number shows zero, even though the tests are running successfully. The log I get is: Aggregation tool emitted warnings: warning: /Users/ABC/Library/Developer/Xcode/DerivedData/projectABC-hfzmkbdgpiswoxfvvnvhrafaiqyb/Build/ProfileData/A8EEC1FB-1699-4C29-A88C-D3DDA226DBC0/0A416494-A393-4319-AA47-502D72084C9C-43351.profraw: raw profile version mismatch: Profile uses raw profile format version = 8; expected version = 10 PLEASE update this tool to the version in the raw profile, or regenerate the raw profile with the expected version. I only have one Xcode (26.0.1) on my machine. I tried cleaning the derived data, the cleaning project, and rerunning the tests, but it hasn't helped. Please help me get the coverage number back. Thank you.

There is a bug in Unity Plugins: Corehaptics.AssetPickerDrawer throws exceptions and draws incorrectly when fieldInfo or assetType is null (FB17305973). I fixed it and created a pull request: https://github.com/apple/unityplugins/pull/47 It has been months and this bug is really annoying.

Hi, I’m trying to free up space on my computer and have uninstalled Xcode. However, I noticed that many large files remain on the filesystem even after uninstalling it. The largest remaining files (~33 GB) are iOS Simulator images located at: /System/Volumes/Data/Library/Developer/CoreSimulator/Volumes I attempted to delete them using root privileges, but it seems that these system files are mounted as read-only. I’m reaching out to ask for guidance to ensure that these files do not contain anything important for macOS, and that it’s safe to remove them before getting in recovery mode. Thank you very much for your advice!