Okay… help me out, I’m behind on the times. Upgraded to the 26 beta from … honestly I think I was still using 16-something? And I’m wondering where the photo markup feature went? To be clear, I’m referring to the ability to write on a photo or screenshot from the Photos app by clicking “Edit”, then “Markup”. Is it gone or am I overlooking it? And do forgive me if this feature has been gone for a while already—as I mentioned, it’s been a while since I bothered with an iOS update. (So far, I definitely liked the version I was on previously much more!)

Hello, We are developing a social media application that allows users to share and view content in the form of images and videos. The app is built with Angular and Ionic, and we use Capacitor to integrate native functionalities. Currently, we are experiencing an issue with content loading on iOS devices. Specifically, when the iPhone is connected to Wi-Fi, videos load quickly and play smoothly. However, when using mobile data, videos take a long time to load or, in some cases, do not load at all. We are trying to identify the cause of the issue and determine whether it could be related to Xcode configuration or any system restrictions. Some potential reasons we have considered include: iOS Mobile Data Usage Restrictions iOS may limit mobile data usage for large downloads or streaming content if the app does not have the proper permissions. In Settings > Mobile Data, users can restrict data usage for specific apps. App Transport Security (ATS) Configuration Xcode and iOS enforce strict security policies for network connections through App Transport Security (ATS). If the API serving the videos uses HTTP instead of HTTPS or has restrictive headers, this could affect loading over mobile networks. Xcode Network Usage Settings Xcode allows configurations related to network access. There might be a setting limiting access to mobile networks when the device is not on Wi-Fi. Video Quality and Adaptability Differences If videos are not optimized for mobile networks (e.g., high-quality formats without adaptive versions), loading times could be significantly longer. Implementing HLS (HTTP Live Streaming) could improve playback on slower networks. Request Timeout Issues If video loading requests have a short timeout, slower mobile network connections might exceed this limit, causing the request to fail. Compression and Caching It is essential to check if videos are properly compressed and if caching is implemented to improve performance on mobile networks. Given this situation, we would like to know what Xcode settings might be affecting video loading performance on mobile data and how we can adjust them to enhance the user experience.

before like 15 mins ago, i was watching something on Instagram and back to Library to open Discord App when all my applications was gone from Library until i restarted my phone and everything was back, maybe it’s a bug or something. IOS 26 Beta 3

Apple announces a Japanese game (Assassin's Creed) in Japanese in Japan but then states "the App is currently not available in your country or region"... that is, Japan! https://developer.apple.com/jp/news/?id=q2zte70j Game is unavailable so why announce it?

Hello there I have got into a bit of an issue with the Apple TV 4k 3rd Gen with Ethernet . So I installed the iOS 26 beta to try out the new changes I usually do this on Apple TVs but in this case it has a bug where my apple music randomly skipped to the next songs . So after some bit of reading I got to know that the apple TV as a recovery mode which could be accessed by pressing home and pause/play buttons . After getting there I was required to bring an iPhone close to start the recovery process which I did but somehow that process always failed I tried to plug in the Ethernet cable since my apple TV is literally 3-5 inches away from my main router I even tried the recommended option of switching to a 2.4ghz connection but nothing worked . I would think that by apple getting rid of the USB ports on these things they had a reliable method of recovery in case of error because these are computers they are bound to fail at some point . So for now am stuck with a boot looping apple TV without a port and I don't even know how that too came about since the recovery process barely starts and fails. Ps am in Africa where we have no apple stores so we usually deal with our products ourselves

After updating my carrier name changed to 410 04 name is not displaying just this code is showing

I have more than five tabs in a TabView, and on some screens, I'm seeing a navigation bar with the title "More". I understand that this is the default behavior of TabView when there are more than five tabs—iOS automatically creates a "More" screen. I've set navigationBarHidden = true throughout my app, but the navigation bar still appears on some screens within the "More" section. Is there another way to hide the moreNavigationController or completely remove the navigation bar from the "More" screen?

As the title states, and it’s extremely frustrating. The floating bar that now appears above the keyboard is cool compared to the built in bar, though it seems to only work when it feels like it. Also the screen seems to have a haze around it, sometimes I cannot read whats needed because of it being blurred and it won’t allow me to navigate to certain things due to the haze being there too. Any way of rolling back my update and going back to my previous iOS?

In e-sim after before some time not richeble the internet it was the big issue for me

Our app provides configuration and maintenance features for Siemens electrical devices. The app supports multiple devices and the devices have their own specific features, which also need to be supported by our App. The devices can be released to the market only when our app supports those features. Our app release timeline is once in every 4 months. We face a challenge when some of these devices are not able to deliver their features by our release time. So, we would like to make these devices plugins, which can be independently released, without releasing the App every time. The app would, of course, be released once in every 4 months, depending on the common features. I'm not able to find how to release only the plugins within the app, without releasing the entire app. Some one has suggested app extensions, but that does not fit our solution as in some cases, we need continuous polling of data from one or mode devices for minutes or hours, as the app can be used by the user to monitor some of the device values.

When anyone calling through cellular call first calls don’t show or call notifications in screen even didn’t play ringtone . but if caller calling second time then ringing tone play properly. this problem happen my iphone 15 pro .128gb im from india . )

With CarPlay communication plugin R18.1, I followed these steps to integrate Enhance siri, the music sound was output from carplay and there is no option for output to Car. ============================================ Enhanced Siri Declare supported audioFormats for the AuxIn and AuxOut streams Since the AuxIn and AuxOut streams for Siri do not have to be both active at the same time, the accessory must claim audio formats support for AuxIn Audio and AuxOut audio independently. The audio formats for each stream can differ from each other (48KHz for AuxOut and 16KHz for AuxIn). The new audio types represent these new streams - AuxIn/speechRecognition & AuxOut/speechRecognition. Check if connected device supports the feature AirPlayReceiverSessionHasFeatureEnhancedSiri() Claim support in the Setup Response message if device supports the feature Add kAirPlayKeyAccessoryEnabledFeature_EnhancedSiri key through the AirPlayReceiverServer delegate AirPlayReceiverServerCopyProperty_f function for the kAirPlayKey_AccessoryEnabledFeatures key. Helper function: CFArrayAppendValue() Add Enhanced Siri parameters dictionary in the INFO message Add dictionary through the AirPlayReceiverServer delegate AirPlayReceiverServerCopyProperty_f function for the kAirPlayKey_EnhancedSiriInfo key. kAirPlayKey_EnhancedSiriInfo dictionary parameters: Voice activation of Siri - kAirPlayKey_EnhancedSiriVoice Current language of voice model - kAirPlayKey_VoiceModelCurrentLanguage Supported languages of voice model - kAirPlayKey_VoiceModelSupportedLanguages Enhanced Button activation of Siri - kAirPlayKey_EnhancedSiriButton Supported zone(s) if any - kAirPlayKey_SupportedSiriTriggerZones Update AudioStream Get state of the AuxIn state by providing an implementation of AudioStreamUpdateState() - Off, local buffering, or streaming to device. Decouple input streams from output streams. AuxIn is an independent input stream only. The property kAudioStreamProperty_Direction will provide the necessary information if the stream is input, output or input & output. Provide a handler for the AirPlayReceiverSessionDelegate setEnhancedSiriParams_f This will provide additional information: Activation type Setting the language of the voice model Invoke the Communication Plugin to start buffering Once the activation type has been specified, the accessory can request the plugin to start buffering using AirPlayReceiverSessionAuxInStart(). Use the new APIs to trigger Siri: AirPlayReceiverSessionRequestSiriActionWithLatency() AirPlayReceiverSessionRequestSiriVoiceActivationWithLatency() AirPlayReceiverSessionRequestSiriVoiceActivationWithSample() Button presses and voice activations should use this new APIs which adds a timestamp of the activation. These APIs allow a choice of a latency or a sample for button and voice activations. If there is a delay between the user pressing the button to notifying the device on the button press, this latency value should represent this time. If the accessory can determine which zone activated, it can provide the zone with the request. Invoke the Communication Plugin to stop buffering You may need to invoke the plugin to stop buffering (AirPlayReceiverSessionAuxInStop()) if exclusive access to the microphone is necessary. Such instances may include but not limited to: Native voice recognition session Telephony Another stream function which uses the microphone starts modesChanged notification can be used to determine if a resource is being used Note, if the session ends, the plugin will automatically stop buffering

This is my first problem and my first question hopefully somebody can help or give me some suggestions. I was in the developr beta of IOS 26 build(235260n) for a while I haven't updated it since the new beat has came out, beta 3. I have been trying to update requested, after about 20 seconds it goes away but does not start the download the update. The problem also begins to download something into the system beta goes from 22.85 GB to 33.78 GB. It just holds the update but doesn't;t update the phone. I have tried power cycling the device and everytime I do that it just resets the system data and allows up to try the update again. Unsure what to do and don't know if I would need to wait for the public beta for IOS26 to change anything on the device. Please let me know if you guys have any more suggestions what should be the next step. I also was unsure if I should backup the device and reinstall it to make sure that its not something with the conncetion.

Issue with Heart Rate Graph from Apple Watch in iOS App Hello Community! I hope everyone is doing well. I'm developing an iOS app that includes a feature to display a graph of the heart rate recorded during a route using the Apple Watch. Current Implementation I have successfully implemented data collection and transfer from the Apple Watch to the iPhone. The app's main UI correctly displays the user's real-time BPM. When the user stops the route, an analysis view is generated, showing speed and altitude (both work perfectly). Expected Behavior The user starts recording a route while monitoring heart rate. After tapping "Stop Route," an analysis view should display a heart rate graph along with speed and altitude data. Issue Encountered Despite multiple attempts, I have not been able to properly generate the heart rate graph. The only result I have achieved so far is a flat line with points representing the recorded BPM over time, instead of a proper graph. Request for Help If anyone has experience implementing a similar feature, I would appreciate any guidance on correcting my implementation. I can share: The file responsible for graph visualization. The file handling data processing after the user stops the route. Any help or suggestions would be greatly appreciated! Summary I'm trying to display a heart rate graph from Apple Watch data in my iOS app. While data collection and transfer work fine, the graph only shows a flat line instead of a proper visualization. Speed and altitude graphs work correctly. If anyone has experience with this, I’d love some guidance!

Back in December 2024 I noticed when I go through the steps to print I would get an error to cancel or retry. We have 4 iPhones and 3 had the newest IOS and those 3 would get the same error. The phone that had old ios 17 something the print would work. Called Apple and did troubleshooting, the opened something on apples end for the developer to investigate. Within 2 weeks a new ios was available and fixed the issue on the 3 phones that could not print. I did the latest update February and March 2025 on all 4 phones thinking no way the issue will happen again and if did all 4 phone cannot print. Is there an iOS bug that is affecting printing ios 18.3.2.

The Apple logo and progress bar appear, and the progress bar gets about halfway through when the screen disappears, then reappears with the Apple logo and progress bar, and then eventually the progress bar just disappears, and only the Apple logo appears. After staring at that for an hour, I gave up and restored iOS 18.5. I made three attempts with Beta 1 and one attempt with Beta 2 and had the same results.

I've got the initial WWDC beta of macOS 26 (25A5279m) installed inside a virtual machine (UTM), but can't seem to update to the second beta. Nothing is showing up within Software Update. Is this because it's within a VM, or am I doing something wrong? It'd be a real pain to have to install a new VM afresh with the RestoreImage for every update.

In xr model mic not working after beta 18.4 update please check

触控按钮里面的截屏功能无法使用。按键组合截屏可以是正常使用。

Please make sure this feature gets placed back. Parents need a way to provide the ability for kids to watch and not watch at their discretion. The new system doesn’t allow this to happen. Are there any workarounds?