Notifications

RSS for tag

Learn about the technical aspects of notification delivery on device, including notification types, priorities, and notification center management.

Notifications Documentation

Posts under Notifications subtopic

Post

Replies

Boosts

Views

Activity

What is the point of thread-id/grouping in push notifications if grouping depends upon user preferences?
There's plenty of articles out there about programatically grouping push notifications. However I have tried setting the thread-id in the push payload when sending a push, or setting the threadIdentifier for a received push in a notification service extension to be the same for several pushes. But if within the iPhone Settings / Notifications the user selects to display pushes as List and turns off Notification Grouping, then each notification resulting from the push appears on its own separately. Is there something other than thread-id/threadidentifier that is used to programmatically group them? If not then whats the point of these as grouping and display is actually under the control of user.
1
0
104
Mar ’25
Background Push Notifications for Emergency App Delayed Despite Critical Alert Entitlement
I’m using Appnotic from my server to send notifications for an emergency service, where it is critical that notifications are delivered immediately. My payload looks like this: "aps": { "alert": "Test alert", "sound": { "critical": 1, "name": "sound.wav", "volume": 0.5 }, "content-available": 1, "category": "alert" }, "topic": "com.fireservicerota.FSR-Primary-Alerting", "custom_payload": { "id": "11", "type": "alert", "incident_id": 23434, "incident_response_id": 2652343, "expiration_time": "2024-06-06T16:59:05+01:00" } } I already have the critical alert entitlement and background processing enabled. Everything seems fine when debugging, but I’m experiencing issues: • Some notifications never arrive • Around 60% of notifications arrive with noticeable delay Since this is an emergency app, delivery speed is crucial. What could be causing this inconsistency?
1
0
148
Apr ’25
App notifications are failing to trigger
Facing issue while sending push notification through the application. The APNs certificate is valid. Below is the error log. System.AggregateException: One or more errors occurred. ---> PushSharp.Apple.ApnsNotificationException: Apns notification error: 'ConnectionError' ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.EndSend(IAsyncResult asyncResult) at System.Net.Sockets.NetworkStream.EndWrite(IAsyncResult asyncResult) --- End of inner exception stack trace --- at System.Net.Security._SslStream.EndWrite(IAsyncResult asyncResult) at System.Net.Security.SslStream.EndWrite(IAsyncResult asyncResult) at System.IO.Stream.<>c.b__53_1(Stream stream, IAsyncResult asyncResult) at System.Threading.Tasks.TaskFactory1.FromAsyncTrimPromise1.Complete(TInstance thisRef, Func3 endMethod, IAsyncResult asyncResult, Boolean requiresSynchronization) --- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task) at PushSharp.Apple.ApnsConnection.<SendBatch>d__21.MoveNext() --- End of inner exception stack trace --- at PushSharp.Apple.ApnsServiceConnection.<Send>d__2.MoveNext() --- End of inner exception stack trace --- ---> (Inner Exception #0) PushSharp.Apple.ApnsNotificationException: Apns notification error: 'ConnectionError' ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.EndSend(IAsyncResult asyncResult) at System.Net.Sockets.NetworkStream.EndWrite(IAsyncResult asyncResult) --- End of inner exception stack trace --- at System.Net.Security._SslStream.EndWrite(IAsyncResult asyncResult) at System.Net.Security.SslStream.EndWrite(IAsyncResult asyncResult) at System.IO.Stream.<>c.<BeginEndWriteAsync>b__53_1(Stream stream, IAsyncResult asyncResult) at System.Threading.Tasks.TaskFactory1.FromAsyncTrimPromise1.Complete(TInstance thisRef, Func3 endMethod, IAsyncResult asyncResult, Boolean requiresSynchronization) --- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task) at PushSharp.Apple.ApnsConnection.d__21.MoveNext() --- End of inner exception stack trace --- at PushSharp.Apple.ApnsServiceConnection.d__2.MoveNext()<---
1
1
171
May ’25
Smart Adaptive Volume & Brightness - Say Goodbye to Noise & Visual Pollution!
Hello everyone in the iOS Devolution community! I'd like to share a suggestion that I believe would bring an unprecedented level of intelligence and comfort to the daily iPhone experience: Smart Adaptive Volume & Brightness. The Problem We Aim to Solve How many times has your iPhone rung too loudly in a quiet environment, embarrassing you in a meeting or waking someone up? Or, the opposite, you missed an important call on a busy street because the volume was too low? And what about screen brightness? It's a constant adjustment: too bright in the dark, hard to see in the sun. Currently, we have to manually adjust volume and brightness, or rely on Auto-Brightness (which only works for the screen) and Focus modes, which can be a bit "all or nothing." This leads to interruptions, frustration, and that feeling that your phone isn't really adapting to you. The Solution: Smart Adaptive Volume & Brightness My proposal is for iOS to use the iPhone's own sensors to dynamically adapt notification and ringtone volume, and screen brightness, to the environment we're in. How it would work in practice: Environmental Scan Before Ringing/Displaying: When a notification (call, message, app alert) is about to be delivered, and even before it makes a sound, the iPhone would briefly activate its sensors. The microphone would read the ambient noise level (in decibels), but without recording audio or analyzing any content. Just the "noise" of the surroundings. The ambient light sensor would assess the light intensity around the device. Intelligent and Coordinated Adjustment: Based on these combined readings of noise and brightness, iOS would make the adjustments: In noisy and bright environments (e.g., on the street during the day): The ringtone volume would be automatically increased to ensure you hear it, and the screen brightness would also be raised to facilitate viewing in strong light. In quiet and dark environments (e.g., cinema, bedroom at night): The volume would be discreetly reduced to avoid disturbances, and the screen brightness would be dimmed for your visual comfort and to avoid bothering others. Adjustments would be gradual, adapting to any type of environment (office, cafe, etc.). User Control: Of course, we'd have the option to enable or disable "Smart Adaptive Volume & Brightness" in the settings. We could also define minimum and maximum limits for these automatic adjustments, ensuring the iPhone adapts to our personal comfort levels. This feature would complement existing Focus modes, operating within the permissions of any active Focus. The Benefits for the User Goodbye to Inconvenient Interruptions: No more startling loud rings in quiet places. Never Miss a Call Again: In noisy environments, your iPhone will adapt to be heard. Constant Visual Comfort: The screen will always be at the ideal brightness, without blinding you in the dark or disappearing in the sun. Smoother Experience: Fewer manual adjustments, more time to focus on what matters. Guaranteed Privacy: The use of microphones and sensors would be strictly for environmental measurement, without recording or analyzing personal data. I believe this feature would bring a new level of intelligence and usability to iOS, making the iPhone even more intuitive and adapted to our daily lives. What do you all think of this idea?
1
0
95
Jun ’25
Push Notifications Error
Hi, I'm experiencing an issue with my app. I use Firebase as my server, and it is great. Still, there is one issue: when I send push notifications from my app to users, the users will get the notification if the app is open, but not when it is closed. I have tried many solutions to fix it, even asking AI, but the issue is still there. I would be happy to give you access to Firebase and the Xcode workspace, as I have no clue how to fix it.
1
0
105
Jan ’26
Audio Session in Notification Service Extension
Is there anyway that I could use AVAudioSession, AVAudioPlayer or anything similar in Notification Service Extension? I am trying to implement Audio Playback in the Notification Service Extension to play specific audio file when receiving Notification regardless the app state(foreground, background or killed), but I am not able to activate audio session in Notification Service Extension. NSError *sessionError = nil; BOOL success = [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryPlayback error:&sessionError]; success = [[AVAudioSession sharedInstance] setActive:YES error:&sessionError]; if (!success) { NSLog(@"Error activating audio session: %@", sessionError); } Below is the error that I got when I am trying to run the code above in Notification Service Extension. Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed}
1
0
164
May ’25
UNNotificationAttachment preview intermittently missing (attachment-store URL becomes unreadable)
I have been fighting this problem for two months and would love any help, advice or tips. Should I file a DTS ticket? Summary We attach a JPEG image to a local notification using UNNotificationAttachment. iOS reports the delivered notification as having attachments=1, but intermittently no image preview appears in Notification Center. In correlated cases, the attachment’s UNNotificationAttachment.url (which points into iOS’s attachment store) becomes unreadable (Data(contentsOf:) fails) even though the delivered notification still reports attachments=1. This document describes the investigation, evidence, and mitigations attempted. Product / Component UserNotifications framework UNNotificationAttachment rendering in Notification UI (Notification Center / banner / expanded preview) Environment App: OnThisDay (SwiftUI, Swift 6) Notifications: local notifications scheduled with UNCalendarNotificationTrigger(repeats: false) Attachment: JPEG generated from PhotoKit (PHImageManager.requestImage) and written to app temp directory, then passed into UNNotificationAttachment. Test contexts: Debug builds (direct Xcode install) TestFlight builds (production signing) iOS devices: multiple, reproducible with long runs and user clearing delivered notifications Expected Result Delivered notifications with UNNotificationAttachment should consistently show the image preview in Notification Center (thumbnail and expanded preview), as long as the notification reports attachments=1. If the OS reports attachments=1, the attachment’s store URL should remain valid/readable for the lifetime of the delivered notification still present in Notification Center. Actual Result Intermittently: Notification Center shows no image preview even though the app scheduled the notification with an attachment and iOS reports the delivered notification as having attachments=1. When we inspect delivered notifications via UNUserNotificationCenter.getDeliveredNotifications, the delivered notification’s request.content.attachments.first?.url exists but is unreadable (attempting Data(contentsOf:) returns nil / throws), i.e. the backing attachment-store file appears missing or inaccessible. In some scenarios the attachment-store file is readable for hours while the notification is pending, and then becomes unreadable after the notification is delivered. Reproduction Scenarios (Observed) Next-day reminders show attachment-store unreadable after delivery 1. Schedule a one-shot daily reminder for next day (07:00 local time) with UNCalendarNotificationTrigger(repeats: false) and a JPEG attachment. 2. During the prior day, periodic background refresh tasks verify the pending notification’s attachment-store URL is readable (pendingReadable=true). 3. After the reminder is delivered the next morning, the delivered snapshot shows the delivered notification’s attachment-store URL is unreadable (readable=false) and Notification Center shows no preview. Interpretation: the attachment-store blob appears to become inaccessible around/after delivery, despite being readable while pending. Evidence and Instrumentation We added non-crashing diagnostic logging (Debug builds) around: Scheduling time Logged that we successfully created a UNNotificationAttachment from a unique temp file. Logged that UNUserNotificationCenter.add(request) succeeded. Queried pendingNotificationRequests() and logged the scheduled request’s attachment url.lastPathComponent (iOS attachment-store filename). Delivered time (when app becomes active) Called UNUserNotificationCenter.getDeliveredNotifications and logged: delivered count, attachment count attachment url.lastPathComponent whether Data(contentsOf: attachment.url) succeeds (readable=true/false) Content fingerprinting Fingerprinted the exact JPEG bytes we wrote (SHA-256 prefix + byte count). Logged the iOS attachment-store filename (url.lastPathComponent) returned post-scheduling. Decode validation probe (later addition) When Data(contentsOf:) succeeds, we validate it decodes as an image using CGImageSourceCreateWithData and log: UTI (e.g. public.jpeg) pixel width/height magic header bytes What we tried / Mitigations Proactive “self-heal” for pending notifications Change: during background refresh/foreground refresh, verify the pending daily reminder’s attachment-store URL readability. If it’s unreadable, reschedule with a new attachment (same trigger). Rationale: if iOS drops the store file before delivery, recreating could repair it. Result: We observed cases where pending remained readable but delivered became unreadable after delivery, so this doesn’t address all observed failures. It is still valuable hardening. Increase scheduling frequency / reschedule closer to fire time (proposed/considered) We discussed adding a debug mode to always recreate the daily reminder during background refresh tasks (or only within N hours of fire time) to reduce the time window between attachment creation and delivery. Status: experimental; not yet confirmed to resolve the “pendingReadable=true → delivered unreadable after delivery” failure. Impact The primary UX value of the daily reminder is the preview photo; missing previews degrade core functionality. Failures are intermittent and appear dependent on OS attachment-store behavior and Notification Center actions (clearing notifications), making them difficult to mitigate fully app-side. Notes / Questions for Apple 1. Is iOS allowed to coalesce/deduplicate UNNotificationAttachment storage across notifications? If so, what is the retention model when delivered notifications are removed? 2. If a delivered notification still reports attachments=1, should its attachment-store URL remain valid/readable while the notification is still present in Notification Center? 3. In “next-day” one-shot scheduling scenarios, can the attachment-store blob be purged between scheduling and delivery (or immediately after delivery) even if the notification remains visible? 4. Is there a recommended pattern to ensure attachment previews remain stable for long-lived scheduled notifications (hours to a day), especially when using UNCalendarNotificationTrigger(repeats: false)? Minimal Code Pattern (simplified) 1. Generate JPEG (PhotoKit → UIImage → JPEG Data). 2. Write to a unique temp URL. 3. Create attachment: UNNotificationAttachment(identifier: <uuid>, url: <tempURL>, options: [UNNotificationAttachmentOptionsTypeHintKey: "public.jpeg"]) 4. Schedule notification with a calendar trigger for the next morning.
1
0
102
Jan ’26
Limit on consecutive push notifications (normal and critical alerts)
Hi, We have a use case where our app needs to send repeated push notifications (both normal and critical alerts) to inform the user about a critical device state and grab their attention. Since iOS doesn’t allow us to schedule local notifications beyond 30 seconds, I need to send multiple pushes from the server side. My questions are: Is there any documented limit on how many push notifications can be sent back-to-back before Apple starts throttling or restricting them? Are critical alerts treated differently from normal notifications in terms of delivery restrictions or frequency limits? Is there a recommended approach for handling scenarios where repeated urgent notifications are necessary to keep the user informed? I want to make sure I’m following Apple’s guidelines and not risking rejection during review.
1
0
114
Sep ’25
Can I enable push notifications in an iOS app built from a web app URL using PWA Builder?
Hi all, I have a React web app that we use as a Progressive Web App (PWA). We currently: Use PWA Builder to package it for Android and iOS Host the app on a secure HTTPS URL Use Firebase Cloud Messaging (FCM) for push notifications (working on Android) However, on iOS, we are unable to get push notifications to work. I understand that PWAs on iOS have limited push support (Safari only, and not through WebView). So I explored using Capacitor, but: Capacitor can load a server.url pointing to our hosted app (great for reuse), but push notifications don’t work If we build the web app locally (npm run build) and embed it in the native iOS shell via Capacitor, push works We would prefer not to fully merge our authentication and main app UIs if avoidable Questions: Is there any approved way to enable push notifications in an iOS .ipa built from a hosted web app (URL) using PWA Builder? If not, is embedding the web assets locally the only Apple-approved way to get push support? Are there any best practices or native plugin recommendations (e.g., APNs or FCM) for handling push notifications in iOS app? Thanks in advance for any guidance. 🙏 Let me know if more technical details would help.
1
0
131
Jun ’25
AWS SNS False Success Delivery
We operate a social network application, SportsYou with over 3 million monthly active users and are experiencing significant issues with push notification delivery through APNs. We have a large number of users reporting they are not receiving push notifications. Our infrastructure uses AWS SNS integrated with APNs to deliver notifications. However, AWS CloudWatch consistently reports successful delivery (Success response), even though users confirm they never received the notifications. Because we receive success responses from AWS SNS, our system does not attempt to recreate or refresh the device endpoints. This leaves us unable to detect or recover from these delivery failures automatically. This issue is widespread and inconsistent. It affects users across multiple variables including different iOS versions, different device models, and different versions of our application. We cannot identify a clear pattern that would help us isolate the root cause. With millions of active users, even a small percentage of delivery failures represents thousands of users experiencing a degraded service. This is significantly impacting user engagement and satisfaction. We need guidance on how to properly diagnose this issue and ensure reliable notification delivery to our users. Specifically, we'd like to understand why we're receiving success responses when notifications aren't being delivered, and what steps we can take to detect and prevent these failures.
1
7
191
Oct ’25
Does UNNotificationRequest have a 64-notification scheduling limit?
Hi, We have a simple calendar reminder app that uses UNNotificationRequest to schedule local notifications for user events. I’m wondering whether UNNotificationRequest has a system-imposed limit of 64 upcoming scheduled notifications, similar to the deprecated UILocalNotification. We’re asking because one of our users is not receiving recently scheduled reminders. Our current workflow is: We schedule notifications on app launch and when the app is about to quit. Before scheduling, we call removeAllPendingNotificationRequests(). We then fetch the 64 nearest upcoming events and schedule them using UNUserNotificationCenter.current().add(...). This approach works fine during our testing, but we’re unsure what might be causing the issue for some users. Any insights would be appreciated. Thanks!
1
0
326
Jan ’26
After uninstalling the app, ManagedSettingsStore.shield is still active — seems to be an Apple system behavior
I’m using the shielding API, my code: let store = ManagedSettingsStore() let whitelist = SharedDefaults.whitelistApplications store.shield.applicationCategories = .all(except: whitelist) And to clear the shield, my code is: store.shield.applications = nil store.shield.applicationCategories = nil The issue: Some users report that after uninstalling my app, the shield is still active, and the UI changes to the default iOS system interface. Even after restarting the device, the apps on the phone remains locked, so the user has no way to remove the shield. Recently I’ve received several complaints on social media and App Store comments, accusing my app of being malicious software. This is not a 100% reproducible bug, but it happens frequently enough. I was also able to reproduce it myself by uninstalling the app during an active lock session. Could Apple engineers please look into this issue and advise how to ensure that once the user uninstalls the app, the device is no longer locked?
1
0
215
Oct ’25
Only the last notification is being delivered
Good morning all! We are facing a specific case dealing with push notifications to iOS devices. In my scenario: I turn off my device's internet Send multiple push notifications via server using Firebase. I turned ON my device's internet again. I only see the last push notification I sent. This is an expected scenario? There is any documentation that supports this statement? Thank you all!
1
0
387
Mar ’25
Clarification on APNs MDM Push Certificate per-customer requirement for MSP/multi-tenant MDM
Hello Apple Developer Community, We’re building an MDM product (SaaS, multi-tenant). I’d like clarification on the APNs MDM push certificate usage model for service providers (MSPs). Question: Is it acceptable for an MDM vendor to use a single APNs MDM push certificate owned by the vendor to manage devices for multiple, independent customer organizations? Or is it required/recommended that each customer (company) must obtain and use its own APNs MDM push certificate (issued under the customer’s Apple ID) for their tenant? Why we’re asking: We understand that many guides show the process where each customer logs into the Apple Push Certificates Portal with their own Apple ID, uploads a CSR provided by the MDM, and then renews yearly. Practically, for a small team and early-stage deployments, using one vendor-owned certificate across multiple tenants would be simpler. We want to ensure we’re not violating any policy, terms, or technical requirements (e.g., certificate ownership, topic binding, device token isolation, audit/compliance expectations). What we need from Apple (or authoritative sources): An official Apple document or policy that clearly states whether per-customer certificates are mandatory vs strongly recommended for MSP/multi-tenant MDMs. If per-customer is mandatory, please point to the relevant clause or section. If a vendor uses a single certificate for multiple organizations, what risks or consequences should we expect (e.g., compliance issues, supportability, potential program violations, off-boarding problems, etc.)? Context: We’re sending only MDM wake notifications (standard MDM flow). We understand certificates expire yearly and must be renewed with the same Apple ID to avoid device re-enrollment. We want to follow Apple’s best practices while keeping early operations manageable. Any guidance, links to official documentation, or clarification from Apple engineers/moderators would be greatly appreciated. Thank you!
1
0
209
Oct ’25
Alarm sounds ios without critical alerts
Hello guys, i need a little help. Im building an alarm clock app, pretty good one, and i have my own sounds i want to use as the alarm ring but notifications on apple cant work when the phone is turned off or the device is in silent mode (Or at least thats how i understand it) unless they have this feature called critical alerts that lets you have notifications even when the phone is turned off or silented. Without this, the phone can do just one beep and only when you open the notification, then it starts ringing but how is this supposed to wake you up? Alarmy has this worked out fine and i cant figure out how, maybe someone here knows. Im thinking maybe they have the critical alerts enabled but then i dont know why Apple would approve theirs and not mine. I tried to submit for the critical alerts feature but apple didn’t approve it saying the app is not the use case and im kinda lost. The whole app could be ruined because of this. So my question is. is there any way how i can use my custom sounds as a notifications on ios even if the phone is turned off or in silent mode+turned off and the app is not straight up running without being approved for critical alerts? Somehow like alarmy does it but i dont know if they have the critical alerts or not. Thank you very much for any kind of help 🙏. For everyone whos reading this, take care!
1
0
199
Jan ’26
What is the point of thread-id/grouping in push notifications if grouping depends upon user preferences?
There's plenty of articles out there about programatically grouping push notifications. However I have tried setting the thread-id in the push payload when sending a push, or setting the threadIdentifier for a received push in a notification service extension to be the same for several pushes. But if within the iPhone Settings / Notifications the user selects to display pushes as List and turns off Notification Grouping, then each notification resulting from the push appears on its own separately. Is there something other than thread-id/threadidentifier that is used to programmatically group them? If not then whats the point of these as grouping and display is actually under the control of user.
Replies
1
Boosts
0
Views
104
Activity
Mar ’25
Background Push Notifications for Emergency App Delayed Despite Critical Alert Entitlement
I’m using Appnotic from my server to send notifications for an emergency service, where it is critical that notifications are delivered immediately. My payload looks like this: "aps": { "alert": "Test alert", "sound": { "critical": 1, "name": "sound.wav", "volume": 0.5 }, "content-available": 1, "category": "alert" }, "topic": "com.fireservicerota.FSR-Primary-Alerting", "custom_payload": { "id": "11", "type": "alert", "incident_id": 23434, "incident_response_id": 2652343, "expiration_time": "2024-06-06T16:59:05+01:00" } } I already have the critical alert entitlement and background processing enabled. Everything seems fine when debugging, but I’m experiencing issues: • Some notifications never arrive • Around 60% of notifications arrive with noticeable delay Since this is an emergency app, delivery speed is crucial. What could be causing this inconsistency?
Replies
1
Boosts
0
Views
148
Activity
Apr ’25
App notifications are failing to trigger
Facing issue while sending push notification through the application. The APNs certificate is valid. Below is the error log. System.AggregateException: One or more errors occurred. ---> PushSharp.Apple.ApnsNotificationException: Apns notification error: 'ConnectionError' ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.EndSend(IAsyncResult asyncResult) at System.Net.Sockets.NetworkStream.EndWrite(IAsyncResult asyncResult) --- End of inner exception stack trace --- at System.Net.Security._SslStream.EndWrite(IAsyncResult asyncResult) at System.Net.Security.SslStream.EndWrite(IAsyncResult asyncResult) at System.IO.Stream.<>c.b__53_1(Stream stream, IAsyncResult asyncResult) at System.Threading.Tasks.TaskFactory1.FromAsyncTrimPromise1.Complete(TInstance thisRef, Func3 endMethod, IAsyncResult asyncResult, Boolean requiresSynchronization) --- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task) at PushSharp.Apple.ApnsConnection.<SendBatch>d__21.MoveNext() --- End of inner exception stack trace --- at PushSharp.Apple.ApnsServiceConnection.<Send>d__2.MoveNext() --- End of inner exception stack trace --- ---> (Inner Exception #0) PushSharp.Apple.ApnsNotificationException: Apns notification error: 'ConnectionError' ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.EndSend(IAsyncResult asyncResult) at System.Net.Sockets.NetworkStream.EndWrite(IAsyncResult asyncResult) --- End of inner exception stack trace --- at System.Net.Security._SslStream.EndWrite(IAsyncResult asyncResult) at System.Net.Security.SslStream.EndWrite(IAsyncResult asyncResult) at System.IO.Stream.<>c.<BeginEndWriteAsync>b__53_1(Stream stream, IAsyncResult asyncResult) at System.Threading.Tasks.TaskFactory1.FromAsyncTrimPromise1.Complete(TInstance thisRef, Func3 endMethod, IAsyncResult asyncResult, Boolean requiresSynchronization) --- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task) at PushSharp.Apple.ApnsConnection.d__21.MoveNext() --- End of inner exception stack trace --- at PushSharp.Apple.ApnsServiceConnection.d__2.MoveNext()<---
Replies
1
Boosts
1
Views
171
Activity
May ’25
Smart Adaptive Volume & Brightness - Say Goodbye to Noise & Visual Pollution!
Hello everyone in the iOS Devolution community! I'd like to share a suggestion that I believe would bring an unprecedented level of intelligence and comfort to the daily iPhone experience: Smart Adaptive Volume & Brightness. The Problem We Aim to Solve How many times has your iPhone rung too loudly in a quiet environment, embarrassing you in a meeting or waking someone up? Or, the opposite, you missed an important call on a busy street because the volume was too low? And what about screen brightness? It's a constant adjustment: too bright in the dark, hard to see in the sun. Currently, we have to manually adjust volume and brightness, or rely on Auto-Brightness (which only works for the screen) and Focus modes, which can be a bit "all or nothing." This leads to interruptions, frustration, and that feeling that your phone isn't really adapting to you. The Solution: Smart Adaptive Volume & Brightness My proposal is for iOS to use the iPhone's own sensors to dynamically adapt notification and ringtone volume, and screen brightness, to the environment we're in. How it would work in practice: Environmental Scan Before Ringing/Displaying: When a notification (call, message, app alert) is about to be delivered, and even before it makes a sound, the iPhone would briefly activate its sensors. The microphone would read the ambient noise level (in decibels), but without recording audio or analyzing any content. Just the "noise" of the surroundings. The ambient light sensor would assess the light intensity around the device. Intelligent and Coordinated Adjustment: Based on these combined readings of noise and brightness, iOS would make the adjustments: In noisy and bright environments (e.g., on the street during the day): The ringtone volume would be automatically increased to ensure you hear it, and the screen brightness would also be raised to facilitate viewing in strong light. In quiet and dark environments (e.g., cinema, bedroom at night): The volume would be discreetly reduced to avoid disturbances, and the screen brightness would be dimmed for your visual comfort and to avoid bothering others. Adjustments would be gradual, adapting to any type of environment (office, cafe, etc.). User Control: Of course, we'd have the option to enable or disable "Smart Adaptive Volume & Brightness" in the settings. We could also define minimum and maximum limits for these automatic adjustments, ensuring the iPhone adapts to our personal comfort levels. This feature would complement existing Focus modes, operating within the permissions of any active Focus. The Benefits for the User Goodbye to Inconvenient Interruptions: No more startling loud rings in quiet places. Never Miss a Call Again: In noisy environments, your iPhone will adapt to be heard. Constant Visual Comfort: The screen will always be at the ideal brightness, without blinding you in the dark or disappearing in the sun. Smoother Experience: Fewer manual adjustments, more time to focus on what matters. Guaranteed Privacy: The use of microphones and sensors would be strictly for environmental measurement, without recording or analyzing personal data. I believe this feature would bring a new level of intelligence and usability to iOS, making the iPhone even more intuitive and adapted to our daily lives. What do you all think of this idea?
Replies
1
Boosts
0
Views
95
Activity
Jun ’25
Push Notifications Error
Hi, I'm experiencing an issue with my app. I use Firebase as my server, and it is great. Still, there is one issue: when I send push notifications from my app to users, the users will get the notification if the app is open, but not when it is closed. I have tried many solutions to fix it, even asking AI, but the issue is still there. I would be happy to give you access to Firebase and the Xcode workspace, as I have no clue how to fix it.
Replies
1
Boosts
0
Views
105
Activity
Jan ’26
Audio Session in Notification Service Extension
Is there anyway that I could use AVAudioSession, AVAudioPlayer or anything similar in Notification Service Extension? I am trying to implement Audio Playback in the Notification Service Extension to play specific audio file when receiving Notification regardless the app state(foreground, background or killed), but I am not able to activate audio session in Notification Service Extension. NSError *sessionError = nil; BOOL success = [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryPlayback error:&sessionError]; success = [[AVAudioSession sharedInstance] setActive:YES error:&sessionError]; if (!success) { NSLog(@"Error activating audio session: %@", sessionError); } Below is the error that I got when I am trying to run the code above in Notification Service Extension. Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed}
Replies
1
Boosts
0
Views
164
Activity
May ’25
UNNotificationAttachment preview intermittently missing (attachment-store URL becomes unreadable)
I have been fighting this problem for two months and would love any help, advice or tips. Should I file a DTS ticket? Summary We attach a JPEG image to a local notification using UNNotificationAttachment. iOS reports the delivered notification as having attachments=1, but intermittently no image preview appears in Notification Center. In correlated cases, the attachment’s UNNotificationAttachment.url (which points into iOS’s attachment store) becomes unreadable (Data(contentsOf:) fails) even though the delivered notification still reports attachments=1. This document describes the investigation, evidence, and mitigations attempted. Product / Component UserNotifications framework UNNotificationAttachment rendering in Notification UI (Notification Center / banner / expanded preview) Environment App: OnThisDay (SwiftUI, Swift 6) Notifications: local notifications scheduled with UNCalendarNotificationTrigger(repeats: false) Attachment: JPEG generated from PhotoKit (PHImageManager.requestImage) and written to app temp directory, then passed into UNNotificationAttachment. Test contexts: Debug builds (direct Xcode install) TestFlight builds (production signing) iOS devices: multiple, reproducible with long runs and user clearing delivered notifications Expected Result Delivered notifications with UNNotificationAttachment should consistently show the image preview in Notification Center (thumbnail and expanded preview), as long as the notification reports attachments=1. If the OS reports attachments=1, the attachment’s store URL should remain valid/readable for the lifetime of the delivered notification still present in Notification Center. Actual Result Intermittently: Notification Center shows no image preview even though the app scheduled the notification with an attachment and iOS reports the delivered notification as having attachments=1. When we inspect delivered notifications via UNUserNotificationCenter.getDeliveredNotifications, the delivered notification’s request.content.attachments.first?.url exists but is unreadable (attempting Data(contentsOf:) returns nil / throws), i.e. the backing attachment-store file appears missing or inaccessible. In some scenarios the attachment-store file is readable for hours while the notification is pending, and then becomes unreadable after the notification is delivered. Reproduction Scenarios (Observed) Next-day reminders show attachment-store unreadable after delivery 1. Schedule a one-shot daily reminder for next day (07:00 local time) with UNCalendarNotificationTrigger(repeats: false) and a JPEG attachment. 2. During the prior day, periodic background refresh tasks verify the pending notification’s attachment-store URL is readable (pendingReadable=true). 3. After the reminder is delivered the next morning, the delivered snapshot shows the delivered notification’s attachment-store URL is unreadable (readable=false) and Notification Center shows no preview. Interpretation: the attachment-store blob appears to become inaccessible around/after delivery, despite being readable while pending. Evidence and Instrumentation We added non-crashing diagnostic logging (Debug builds) around: Scheduling time Logged that we successfully created a UNNotificationAttachment from a unique temp file. Logged that UNUserNotificationCenter.add(request) succeeded. Queried pendingNotificationRequests() and logged the scheduled request’s attachment url.lastPathComponent (iOS attachment-store filename). Delivered time (when app becomes active) Called UNUserNotificationCenter.getDeliveredNotifications and logged: delivered count, attachment count attachment url.lastPathComponent whether Data(contentsOf: attachment.url) succeeds (readable=true/false) Content fingerprinting Fingerprinted the exact JPEG bytes we wrote (SHA-256 prefix + byte count). Logged the iOS attachment-store filename (url.lastPathComponent) returned post-scheduling. Decode validation probe (later addition) When Data(contentsOf:) succeeds, we validate it decodes as an image using CGImageSourceCreateWithData and log: UTI (e.g. public.jpeg) pixel width/height magic header bytes What we tried / Mitigations Proactive “self-heal” for pending notifications Change: during background refresh/foreground refresh, verify the pending daily reminder’s attachment-store URL readability. If it’s unreadable, reschedule with a new attachment (same trigger). Rationale: if iOS drops the store file before delivery, recreating could repair it. Result: We observed cases where pending remained readable but delivered became unreadable after delivery, so this doesn’t address all observed failures. It is still valuable hardening. Increase scheduling frequency / reschedule closer to fire time (proposed/considered) We discussed adding a debug mode to always recreate the daily reminder during background refresh tasks (or only within N hours of fire time) to reduce the time window between attachment creation and delivery. Status: experimental; not yet confirmed to resolve the “pendingReadable=true → delivered unreadable after delivery” failure. Impact The primary UX value of the daily reminder is the preview photo; missing previews degrade core functionality. Failures are intermittent and appear dependent on OS attachment-store behavior and Notification Center actions (clearing notifications), making them difficult to mitigate fully app-side. Notes / Questions for Apple 1. Is iOS allowed to coalesce/deduplicate UNNotificationAttachment storage across notifications? If so, what is the retention model when delivered notifications are removed? 2. If a delivered notification still reports attachments=1, should its attachment-store URL remain valid/readable while the notification is still present in Notification Center? 3. In “next-day” one-shot scheduling scenarios, can the attachment-store blob be purged between scheduling and delivery (or immediately after delivery) even if the notification remains visible? 4. Is there a recommended pattern to ensure attachment previews remain stable for long-lived scheduled notifications (hours to a day), especially when using UNCalendarNotificationTrigger(repeats: false)? Minimal Code Pattern (simplified) 1. Generate JPEG (PhotoKit → UIImage → JPEG Data). 2. Write to a unique temp URL. 3. Create attachment: UNNotificationAttachment(identifier: <uuid>, url: <tempURL>, options: [UNNotificationAttachmentOptionsTypeHintKey: "public.jpeg"]) 4. Schedule notification with a calendar trigger for the next morning.
Replies
1
Boosts
0
Views
102
Activity
Jan ’26
Limit on consecutive push notifications (normal and critical alerts)
Hi, We have a use case where our app needs to send repeated push notifications (both normal and critical alerts) to inform the user about a critical device state and grab their attention. Since iOS doesn’t allow us to schedule local notifications beyond 30 seconds, I need to send multiple pushes from the server side. My questions are: Is there any documented limit on how many push notifications can be sent back-to-back before Apple starts throttling or restricting them? Are critical alerts treated differently from normal notifications in terms of delivery restrictions or frequency limits? Is there a recommended approach for handling scenarios where repeated urgent notifications are necessary to keep the user informed? I want to make sure I’m following Apple’s guidelines and not risking rejection during review.
Replies
1
Boosts
0
Views
114
Activity
Sep ’25
Unknown notification in settings app
I have a “1” above the setting app on my iPhone. However when I open settings there is no notification that shows up. I have tried force restarting and done the beta updates as they release however nothing works to got rid of it. What can I do?
Replies
1
Boosts
0
Views
100
Activity
Apr ’25
Can I enable push notifications in an iOS app built from a web app URL using PWA Builder?
Hi all, I have a React web app that we use as a Progressive Web App (PWA). We currently: Use PWA Builder to package it for Android and iOS Host the app on a secure HTTPS URL Use Firebase Cloud Messaging (FCM) for push notifications (working on Android) However, on iOS, we are unable to get push notifications to work. I understand that PWAs on iOS have limited push support (Safari only, and not through WebView). So I explored using Capacitor, but: Capacitor can load a server.url pointing to our hosted app (great for reuse), but push notifications don’t work If we build the web app locally (npm run build) and embed it in the native iOS shell via Capacitor, push works We would prefer not to fully merge our authentication and main app UIs if avoidable Questions: Is there any approved way to enable push notifications in an iOS .ipa built from a hosted web app (URL) using PWA Builder? If not, is embedding the web assets locally the only Apple-approved way to get push support? Are there any best practices or native plugin recommendations (e.g., APNs or FCM) for handling push notifications in iOS app? Thanks in advance for any guidance. 🙏 Let me know if more technical details would help.
Replies
1
Boosts
0
Views
131
Activity
Jun ’25
AWS SNS False Success Delivery
We operate a social network application, SportsYou with over 3 million monthly active users and are experiencing significant issues with push notification delivery through APNs. We have a large number of users reporting they are not receiving push notifications. Our infrastructure uses AWS SNS integrated with APNs to deliver notifications. However, AWS CloudWatch consistently reports successful delivery (Success response), even though users confirm they never received the notifications. Because we receive success responses from AWS SNS, our system does not attempt to recreate or refresh the device endpoints. This leaves us unable to detect or recover from these delivery failures automatically. This issue is widespread and inconsistent. It affects users across multiple variables including different iOS versions, different device models, and different versions of our application. We cannot identify a clear pattern that would help us isolate the root cause. With millions of active users, even a small percentage of delivery failures represents thousands of users experiencing a degraded service. This is significantly impacting user engagement and satisfaction. We need guidance on how to properly diagnose this issue and ensure reliable notification delivery to our users. Specifically, we'd like to understand why we're receiving success responses when notifications aren't being delivered, and what steps we can take to detect and prevent these failures.
Replies
1
Boosts
7
Views
191
Activity
Oct ’25
Does UNNotificationRequest have a 64-notification scheduling limit?
Hi, We have a simple calendar reminder app that uses UNNotificationRequest to schedule local notifications for user events. I’m wondering whether UNNotificationRequest has a system-imposed limit of 64 upcoming scheduled notifications, similar to the deprecated UILocalNotification. We’re asking because one of our users is not receiving recently scheduled reminders. Our current workflow is: We schedule notifications on app launch and when the app is about to quit. Before scheduling, we call removeAllPendingNotificationRequests(). We then fetch the 64 nearest upcoming events and schedule them using UNUserNotificationCenter.current().add(...). This approach works fine during our testing, but we’re unsure what might be causing the issue for some users. Any insights would be appreciated. Thanks!
Replies
1
Boosts
0
Views
326
Activity
Jan ’26
UNNotificationAttachment Sub-Optimal File Type Check
UNNotificationAttachment convenience init method seems to be checking for supported file types based on the extension of the file URL provided as a constructor parameter. This seems to be sub-optimal at best and incorrect at worst. Is this is a known issue for which a bug already exists?
Replies
1
Boosts
0
Views
101
Activity
Oct ’25
apns推送,app无法收到通知
token:009739d008a19dbe7e2273a1e4e8b5f73c4e2d7e220e7308f41e316f4c2fcf56 最近app无法收到服务端通过apns推送的通知,提交是成功的,但是app的所有用户都无法收到通知
Replies
1
Boosts
0
Views
213
Activity
Jul ’25
After uninstalling the app, ManagedSettingsStore.shield is still active — seems to be an Apple system behavior
I’m using the shielding API, my code: let store = ManagedSettingsStore() let whitelist = SharedDefaults.whitelistApplications store.shield.applicationCategories = .all(except: whitelist) And to clear the shield, my code is: store.shield.applications = nil store.shield.applicationCategories = nil The issue: Some users report that after uninstalling my app, the shield is still active, and the UI changes to the default iOS system interface. Even after restarting the device, the apps on the phone remains locked, so the user has no way to remove the shield. Recently I’ve received several complaints on social media and App Store comments, accusing my app of being malicious software. This is not a 100% reproducible bug, but it happens frequently enough. I was also able to reproduce it myself by uninstalling the app during an active lock session. Could Apple engineers please look into this issue and advise how to ensure that once the user uninstalls the app, the device is no longer locked?
Replies
1
Boosts
0
Views
215
Activity
Oct ’25
Only the last notification is being delivered
Good morning all! We are facing a specific case dealing with push notifications to iOS devices. In my scenario: I turn off my device's internet Send multiple push notifications via server using Firebase. I turned ON my device's internet again. I only see the last push notification I sent. This is an expected scenario? There is any documentation that supports this statement? Thank you all!
Replies
1
Boosts
0
Views
387
Activity
Mar ’25
CKSubscription in shared records
I have a database in CloudKit, where the host share (using CKShare) a record to participants. The record is in her private database, but for the participants is in their shared database. How do I send push notifications to everyone when a new child record is created?
Replies
1
Boosts
0
Views
111
Activity
Jul ’25
Clarification on APNs MDM Push Certificate per-customer requirement for MSP/multi-tenant MDM
Hello Apple Developer Community, We’re building an MDM product (SaaS, multi-tenant). I’d like clarification on the APNs MDM push certificate usage model for service providers (MSPs). Question: Is it acceptable for an MDM vendor to use a single APNs MDM push certificate owned by the vendor to manage devices for multiple, independent customer organizations? Or is it required/recommended that each customer (company) must obtain and use its own APNs MDM push certificate (issued under the customer’s Apple ID) for their tenant? Why we’re asking: We understand that many guides show the process where each customer logs into the Apple Push Certificates Portal with their own Apple ID, uploads a CSR provided by the MDM, and then renews yearly. Practically, for a small team and early-stage deployments, using one vendor-owned certificate across multiple tenants would be simpler. We want to ensure we’re not violating any policy, terms, or technical requirements (e.g., certificate ownership, topic binding, device token isolation, audit/compliance expectations). What we need from Apple (or authoritative sources): An official Apple document or policy that clearly states whether per-customer certificates are mandatory vs strongly recommended for MSP/multi-tenant MDMs. If per-customer is mandatory, please point to the relevant clause or section. If a vendor uses a single certificate for multiple organizations, what risks or consequences should we expect (e.g., compliance issues, supportability, potential program violations, off-boarding problems, etc.)? Context: We’re sending only MDM wake notifications (standard MDM flow). We understand certificates expire yearly and must be renewed with the same Apple ID to avoid device re-enrollment. We want to follow Apple’s best practices while keeping early operations manageable. Any guidance, links to official documentation, or clarification from Apple engineers/moderators would be greatly appreciated. Thank you!
Replies
1
Boosts
0
Views
209
Activity
Oct ’25
Alarm sounds ios without critical alerts
Hello guys, i need a little help. Im building an alarm clock app, pretty good one, and i have my own sounds i want to use as the alarm ring but notifications on apple cant work when the phone is turned off or the device is in silent mode (Or at least thats how i understand it) unless they have this feature called critical alerts that lets you have notifications even when the phone is turned off or silented. Without this, the phone can do just one beep and only when you open the notification, then it starts ringing but how is this supposed to wake you up? Alarmy has this worked out fine and i cant figure out how, maybe someone here knows. Im thinking maybe they have the critical alerts enabled but then i dont know why Apple would approve theirs and not mine. I tried to submit for the critical alerts feature but apple didn’t approve it saying the app is not the use case and im kinda lost. The whole app could be ruined because of this. So my question is. is there any way how i can use my custom sounds as a notifications on ios even if the phone is turned off or in silent mode+turned off and the app is not straight up running without being approved for critical alerts? Somehow like alarmy does it but i dont know if they have the critical alerts or not. Thank you very much for any kind of help 🙏. For everyone whos reading this, take care!
Replies
1
Boosts
0
Views
199
Activity
Jan ’26
Silent Push Notifications Ios no Sound
My push notifications on Ios devices come through but only silently while all settings are on order. On Android sounds are on. Anyway knows how to fix this on Apple's side?
Replies
1
Boosts
0
Views
107
Activity
Jul ’25