The APP was not awakened by system after start a liveactivity and the liveactivity has showed on lock screen.so the updatetoken wont send to our inner server and the liveactivity can not update,often like this,but sometimes it can work. it makes me confuse,and i don't know how should i can do,because the liveactivity like a black box,i can not analyse the data link.for example ,inner server send a start liveactivity,but it can not accept a updatetoken unless the user lanuch APP. i hope the liveactivity can start and update on background. And i have developed it as described in the document. Hope to get your help，thank you very much.

Good morning all! We are facing a specific case dealing with push notifications to iOS devices. In my scenario: I turn off my device's internet Send multiple push notifications via server using Firebase. I turned ON my device's internet again. I only see the last push notification I sent. This is an expected scenario? There is any documentation that supports this statement? Thank you all!

iOS push notification is not working for in App since 03-Apr-2025. We are pushing the message to APNS from our application, but message is not delivered to iOS device. We have performed tests on both PROD and QA environment and following are the observations: PROD successfully pushing the notification to APNS but not receiving the notification on iOS device (100% failure). QA received notification on iOS device always (100% success). Analyzed PROD notification server log at our end and we do not observe any error and it is showing successful also when message is pushed to APNS all the time. Need to check from APNS why push messages are not delivered to iOS devices. Validated the PROD APNS certificate at our end which we are using during call to APNS - it is valid till Oct 2025. Please suggest me any possible solution because I don't have any clue where it is failing and what to do

I am developing a VoIP service. Usually, when receiving a VoIP Push, Callkit is exposed immediately after receiving the message and the app is designed to be used. However, there is an extremely intermittent phenomenon (not well reproduced) where the app does not wake up even when receiving a VoIP Push. And after a long time, the app wakes up and Callkit is activated. (A long time after receiving the call…) Has anyone experienced the above phenomenon? I wonder if there are any reported parts depending on the OS version. (I have identified that it does not occur in the 17.x version, but it is difficult to guarantee because it occurs extremely intermittently) The app is not running in the background, but... Could this be happening if there are a lot of pending operations in the background? I need help urgently

Hello, I am working on a project that involves using external device to connect over BLE with users iPhone. I would like to be able to notify users on our device about eg. incoming calls, messages etc. I have been succesfull in using ANCS to achieve that but I am a little worried around consistency of this solution, especially taking into account following line from documentation: Due to the nature of iOS, the ANCS is not guaranteed to always be present. As a result, the NC should look for and subscribe to the Service Changed characteristic of the GATT service in order to monitor for the potential publishing and unpublishing of the ANCS at any time. I have not been able (yet?) to find or identify circumstances when ANCS would not be avilable or would be "removed in runtime", hence would it be possible to request some guidance and clarification on the conditions when ANCS can be unavailable or removed? Thank you!

Back story: I'm developing an app that communicates with a personal medical device. We use critical alerts when we have hardware issues that could result in harm to the patient. The audio file is a 30 second file to make sure the patient is aware. If the app is open when they occur, we pop up a modal message in the app. When the user dismisses the notice, we call UNNotificationCenter::removeDeliveredNotifications(withIdentifiers:) to remove the critical alert and also to stop the audio file that is playing. This normally works fine. However we discovered that if the patient leaves critical alert enabled but disables notifications for our app, that we can still post the critical alert and it goes off. However when the user dismisses the message, the removeDeliveredNotifications call does not work. I did some debugging and if call getDeliveredNotifications with this permission combination, it return 0 (normally it would return 1). Does anyone know of another way to remove the critical alert in this situation? (or should I be submitting this as a bug?)

I'm working on implementing Apple Wallet passes using background push notifications. My server successfully sends the push notification using APNs. The response from the server is HTTP/2 200, and the device receives the push — I can confirm this from device logs. However, the device logs show the following error: "Failed to parse JSON message payload for topic " "Unable to deserialize JSON message payload" My payload is below 2 payload. //string payload = "{"aps":{"content-available":1}}"; string payload = JsonConvert.SerializeObject(new { aps = new Dictionary<string, object> { { "content-available", 1 } } }); string curlArgs = $"-s -o nul -w \"%{{http_code}}\" " + $"--data-binary \"{payload}\" " + $"-H \"apns-topic: {bundleId}\" " + $"-H \"apns-push-type: background\" " + $"-H \"apns-priority: 5\" " + $"-H \"content-type: application/json\" " + $"-H \"authorization: bearer {jwt}\" " + $"--http2 https://api.push.apple.com/3/device/{token}"; I’ve confirmed that: The device has the Wallet pass installed. The apns-topic header is set to my passTypeIdentifier. The apns-push-type is background and apns-priority is 5. Steps to Reproduce: Install Wallet pass on iOS device. Send background push to device using the above payload. Observe the device logs using Console.app or log stream. See error: unable to deserialize JSON message payload. Is there a specific payload format expected for Wallet passes? Or any additional fields required in the push payload to avoid this deserialization error?

Provisioning profiles created for my App ID are not including the Push Notifications capability, even though Push Notifications is enabled in the App ID configuration in Apple Developer Portal. I have enabled Push Notifications for my App ID (com.abc.app) in the Apple Developer Portal. The capability shows as enabled and saved. However, when provisioning profiles are generated (either manually or through third-party tools like Expo Application Services), they do not include: The Push Notifications capability The aps-environment entitlement This results in build failures with the following errors: Provisioning profile "*[expo] com.abc.app AppStore [timestamp]" doesn't support the Push Notifications capability. Provisioning profile "*[expo] com.abc.app AppStore [timestamp]" doesn't include the aps-environment entitlement. Steps Taken ✅ Enabled Push Notifications in App ID configuration (com.mirova.app) ✅ Saved the App ID configuration multiple times ✅ Waited for Apple's systems to sync (waited 5-10 minutes) ✅ Removed and re-added Push Notifications capability (unchecked, saved, re-checked, saved) ✅ Created Push Notification key in Apple Developer Portal ✅ Verified Push Notifications is checked and saved in App ID ❌ Provisioning profiles still created without Push Notifications capability Expected Behavior When Push Notifications is enabled for an App ID, any provisioning profiles created for that App ID should automatically include: Push Notifications capability aps-environment entitlement (set to production or development) Actual Behavior Provisioning profiles are created without Push Notifications capability, even though: Push Notifications is enabled in App ID App ID configuration is saved Sufficient time has passed for sync Additional Information Push Notification Key: Created and valid (Key ID: 3YKQ7XLG9L and 747G8W2J68) Distribution Certificate: Valid and active Provisioning Profile Type: App Store distribution Third-party Tool: Using Expo Application Services (EAS) for builds, but issue persists with manually created profiles as well Questions Is there a delay or sync issue between enabling Push Notifications in App ID and it being available for provisioning profiles? Are there any additional steps required to ensure Push Notifications is included in provisioning profiles? Is there a known issue with Push Notifications capability not being included in provisioning profiles? Should I create the provisioning profile in a specific way to ensure Push Notifications is included? Environment Platform: iOS Build Type: App Store distribution Xcode Version: (via EAS cloud build) Thank you for your assistance. I've been unable to resolve this issue and would appreciate any guidance. iOS Deployment Target: Latest

Hi all, We encountered an issue where APNs (Apple Push Notification service) push messages cannot be received during development. The specific description is as follows: Our app runs on an iPad that connects to the cellular network using a SIM card and accesses the Internet through the company's MDM, which provides APN setting proxies. During operation, we found that the device fails to receive push messages from APNs. Network packet capture revealed that the connection attempt by apsd to port 5223 failed. According to Apple's documentation (https://support.apple.com/zh-cn/102266), when port 5223 cannot be connected to, it will fall back to port 443 and use a proxy. However, our packet capture showed that when port 5223 was unreachable, the apsd service on the iPad did not attempt to establish a connection to port 443. Since the iPad device currently cannot establish a connection with APNs, it consistently fails to receive push messages from APNs. We tried disconnecting the SIM card and using a Wi-Fi environment, and in this case, the iPad device was able to receive push messages from APNs normally. Could you advise us on how to proceed with troubleshooting in this situation?

It seems our company server is sending to Apple push service the push notifications that are supposed to be transferred to devices our app is installed on – but you it seems you are blocking the request We can see traffic going out from our server side towards the apple gateway notification server using port 2195 and we can see that the traffic gets "server-rst" meaning that the apple gateway server kills the connection You might need to whitelist our external IP's

In didFinishLaunchingWithOptions I have this setup for getting the token to send to my server for notifications. The issue is that the delegate callback didRegisterForRemoteNotificationsWithDeviceToken gets called twice when also initializing a CKSyncEngine object. This confuses me. Is this expected behavior? Why is the delegate callback only called twice when both are called, but not at all when only using CKSyncEngine. See code and comments below. /// Calling just this triggers `didRegisterForRemoteNotificationsWithDeviceToken` once. UIApplication.shared.registerForRemoteNotifications() /// When triggering the above function plus initializing a CKSyncEngine, `didRegisterForRemoteNotificationsWithDeviceToken` gets called twice. /// This somewhat make sense, because CloudKit likely also registers for remote notifications itself, but why is the delegate not triggered when *only* initializing CKSyncEngine and removing the `registerForRemoteNotifications` call above? let syncManager = SyncManager() /// Further more, if calling `registerForRemoteNotifications` with a delay instead of directly, the delegate is only called once, as expected. For some reason, the delegate is only triggered when two entities call `registerForRemoteNotifications` at the same time? DispatchQueue.main.asyncAfter(deadline: .now() + 4) { UIApplication.shared.registerForRemoteNotifications() } func application(_ application: UIApplication, didRegisterForRemoteNotificationsWithDeviceToken deviceToken: Data) { print("didRegisterForRemoteNotificationsWithDeviceToken") }

Hi, We have a simple calendar reminder app that uses UNNotificationRequest to schedule local notifications for user events. I’m wondering whether UNNotificationRequest has a system-imposed limit of 64 upcoming scheduled notifications, similar to the deprecated UILocalNotification. We’re asking because one of our users is not receiving recently scheduled reminders. Our current workflow is: We schedule notifications on app launch and when the app is about to quit. Before scheduling, we call removeAllPendingNotificationRequests(). We then fetch the 64 nearest upcoming events and schedule them using UNUserNotificationCenter.current().add(...). This approach works fine during our testing, but we’re unsure what might be causing the issue for some users. Any insights would be appreciated. Thanks!

We are encountering the following issue with our VoIP application for iPhone, published on the App Store, and would appreciate your guidance on possible countermeasures. The VoIP application (callee side) utilizes a Wi-Fi network. The sequence leading to the issue is as follows: VoIP App (callee): Launches iPhone (callee): Locks (e.g., by short-pressing the power button) VoIP App (callee): Transitions to a suspended state VoIP App (caller): Initiates a VoIP call VoIP App (callee): Receives a local push notification VoIP App (callee): Creates a UDP socket for call control (for SIP send/receive) VoIP App (callee): Creates a UDP socket for audio stream (for RTP send/receive) VoIP App (callee): Exchanges SIP messages (INVITE, 100 Trying, 180 Ringing, etc.) using the call control UDP socket VoIP App (callee): Answers the incoming call VoIP App (callee): Executes performAnswerCallAction() Immediately after executing performAnswerCallAction() in the above sequence, the sendto() function for both the "UDP socket for call control (SIP send/receive)" and the "UDP socket for audio stream (RTP send/receive)" occasionally returns errno = 57 (ENOTCONN). (of course The VoIP app itself does not close the sockets in this timing) Given that the user has performed an answer operation, the iPhone is in an active state, and the VoIP app is running, what could be the possible reasons why the sockets suddenly become unusable? Could you please provide guidance on how to avoid such socket closures? Our VoIP app uses SCNetworkReachabilitySetCallback to receive network change notifications, but no notifications regarding network changes were received at the time errno = 57 occurred. Is it possible for sockets used by an application to be closed without any notification to the application itself?

The following issue has occurred: Push notifications are not being received on certain devices. What could be the possible causes? Push notifications are being sent from our own server, and we are receiving normal responses from APNs. Users have confirmed that notifications are enabled on their devices, and they report no network issues. This problem is occurring for multiple users.

My Mac app has a launch agent (within the app bundle) that works great without the app running. There are some occasions where I need to display an alert and ask the user to launch the app to handle the issue. I thought about using UNUserNotificationCenter but I'm not able to make it work from the agent. I'm asking for authorization as follows: [center requestAuthorizationWithOptions:(UNAuthorizationOptionAlert | UNAuthorizationOptionSound | UNAuthorizationOptionBadge) completionHandler:^(BOOL granted, NSError * _Nullable error) { NSLog(@"authorization request completion. Granted: %@, error: %@ (%@)",granted?@"YES":@"NO",error, [error localizedDescription]); }]; And I'm trying to post the notification as follows: content.title = @"Your App Name"; content.body = @"Click the button to open the app"; content.sound = [UNNotificationSound defaultSound]; UNNotificationRequest *request = [UNNotificationRequest requestWithIdentifier:[[NSUUID UUID] UUIDString] content:content trigger:nil]; [center addNotificationRequest:request withCompletionHandler:^(NSError * _Nullable error) { if (error) { NSLog(@"Error showing notification: %@ %@", error, [error localizedDescription]); } }]; When running I'm getting asked to authorize, I authorize and all seems OK in system settings but I'm not able send any notifications. addNotificationRequest results in UNErrorCodeNotificationsNotAllowed error. I tried this with the authorization request inside the main app, or inside the agent, with the same results. When trying to post the notification from within the app, it does work, but that's not what I need. Is posting notifications from within the launch agent not possible at all, or is there anything here that I'm missing. TIA

I'm encountering an issue with our legacy Objective-C codebase that uses UIApplicationDelegate. Here are the steps to reproduce the issue: Uninstall the application from the device. Install and launch the application. As part of the launch event, the client requests notification permission. The permission prompt is still displayed, even though the client receives a remote notification token (which appears to be a cached one). I followed the same steps with a sample app built with Swift (SwiftUI), and this issue did not occur. In the Swift app, I consistently received a delegate<didRegisterForRemoteNotificationsWithDeviceToken> call after the user allowed the notification permission. Could you please provide some insights into why this might be happening with only our client?

Hello everyone in the iOS Devolution community! I'd like to share a suggestion that I believe would bring an unprecedented level of intelligence and comfort to the daily iPhone experience: Smart Adaptive Volume & Brightness. The Problem We Aim to Solve How many times has your iPhone rung too loudly in a quiet environment, embarrassing you in a meeting or waking someone up? Or, the opposite, you missed an important call on a busy street because the volume was too low? And what about screen brightness? It's a constant adjustment: too bright in the dark, hard to see in the sun. Currently, we have to manually adjust volume and brightness, or rely on Auto-Brightness (which only works for the screen) and Focus modes, which can be a bit "all or nothing." This leads to interruptions, frustration, and that feeling that your phone isn't really adapting to you. The Solution: Smart Adaptive Volume & Brightness My proposal is for iOS to use the iPhone's own sensors to dynamically adapt notification and ringtone volume, and screen brightness, to the environment we're in. How it would work in practice: Environmental Scan Before Ringing/Displaying: When a notification (call, message, app alert) is about to be delivered, and even before it makes a sound, the iPhone would briefly activate its sensors. The microphone would read the ambient noise level (in decibels), but without recording audio or analyzing any content. Just the "noise" of the surroundings. The ambient light sensor would assess the light intensity around the device. Intelligent and Coordinated Adjustment: Based on these combined readings of noise and brightness, iOS would make the adjustments: In noisy and bright environments (e.g., on the street during the day): The ringtone volume would be automatically increased to ensure you hear it, and the screen brightness would also be raised to facilitate viewing in strong light. In quiet and dark environments (e.g., cinema, bedroom at night): The volume would be discreetly reduced to avoid disturbances, and the screen brightness would be dimmed for your visual comfort and to avoid bothering others. Adjustments would be gradual, adapting to any type of environment (office, cafe, etc.). User Control: Of course, we'd have the option to enable or disable "Smart Adaptive Volume & Brightness" in the settings. We could also define minimum and maximum limits for these automatic adjustments, ensuring the iPhone adapts to our personal comfort levels. This feature would complement existing Focus modes, operating within the permissions of any active Focus. The Benefits for the User Goodbye to Inconvenient Interruptions: No more startling loud rings in quiet places. Never Miss a Call Again: In noisy environments, your iPhone will adapt to be heard. Constant Visual Comfort: The screen will always be at the ideal brightness, without blinding you in the dark or disappearing in the sun. Smoother Experience: Fewer manual adjustments, more time to focus on what matters. Guaranteed Privacy: The use of microphones and sensors would be strictly for environmental measurement, without recording or analyzing personal data. I believe this feature would bring a new level of intelligence and usability to iOS, making the iPhone even more intuitive and adapted to our daily lives. What do you all think of this idea?

Hey Together, I have seen that critical notifications need to be confirmed by apple to be used. Sadly I couldn't figure out where to ask for that. Context: I have a sports tournament app for Beach Handball. There are a couple of Courts like up to 20-25. The main use for that in my app would be to notify first aiders/Medics. Right now they are called in via Speakers or by the referees just writing that into a WhatsApp chat. As this takes a long time and the speakers can be deactivated due to rain, power shortage or even the medics sometimes are not in range to exactly hear the speakers calling them. To Speed up this process I want them to download the App, Register via an E-Mail or a One Time Code. Now if a referee needs immediate Help from the Medics on their court they can send the Critical alert to the Medics without having to write a chat into a WhatsApp group, to get a call through the speakers 10 minutes later which the medics may not even hear. A couple of weeks ago we had a player falling on her back/neck/head and they couldn't figure out if she broke her neck or not. Luckily the medics were right next to the court and saw that. but what would happen if they were a couple hundred of meters away and did not notice that? I mean the PA system was off due to a power shortage. someone trying to move her? Risking her death? And while we are at it we could add those notifications if a team is missing to a court for a game that already should've started. Critical because it is urgent. Those notifications are handled with care.

We're experiencing an issue with Apple Push Notification service where APNs continues to return 200 OK responses for device tokens belonging to uninstalled applications. Issue Details: When sending push notifications to device tokens. APNs returns 200 OK responses even for devices where our app was uninstalled more than a month ago According to documentation(https://developer.apple.com/documentation/usernotifications/handling-notification-responses-from-apns), APNs should return 410 status code with JSON body for invalid tokens Expected Behavior: APNs should return 410 status code when device token is no longer valid (app uninstalled) Thanks in advanced for support

We would like to better understand the discrepancy between a Push To Start and the subsequent Updates where I see a number of recipients drop greatly. Our assumption is that this is a result of the end user not clicking the "Allow" prompt when a push to start widget is shown on the screen for the first time, but we currently do not have a way to listen to the user's choice when prompted. Is there any way of tapping into this, to determine if this is in fact where the variance is coming from, or if there is actually just a problem with the request to retrieve the update token from our end?