Summary On macOS 26.4.1 (25E253), iCloud Drive file uploads can enter a silent deadlock where every upload attempt fails at the transport layer. No error is surfaced anywhere — not in Finder, not in System Settings, not in the iCloud status panel. The upload queue simply stops. Other iCloud services (Photos, Mail, App Store) continue to work normally through the same networking infrastructure at the same time. Root Cause The issue is a stale HTTP/3 (QUIC) session cached in the user-level nsurlsessiond process's BackgroundConnectionPool. The deadlock cycle: cloudd requests an upload to the GCS storage endpoint nsurlsessiond provides the cached (broken) HTTP/3 session The TLS handshake succeeds, but the body upload dies mid-transfer (err=T, requestDuration=-1.000, responseHeaderBytes=0) cloudd retries with a new connectionUUID — but nsurlsessiond still routes through the same poisoned QUIC session This repeats indefinitely Killing cloudd alone does not help — nsurlsessiond retains the poisoned pool. Only killing both the user-level cloudd and nsurlsessiond clears the pool and forces a fresh protocol negotiation. The Smoking Gun After killing both daemons, the system falls back to HTTP/1.1 for the stuck uploads — and they complete instantly: Before Kill After Kill Protocol h3 (QUIC) http/1.1 (TCP) Largest upload Failed at partial offsets 26 MB in 1.6 seconds Server response 0 bytes 596 bytes (normal) Same endpoint, same files, same network interface (en5), same power state. The only change was the protocol negotiation after a fresh nsurlsessiond. Reproduction Reproduced 3 times on April 11, 2026 using a standardized set of 8 test files (8 bytes to 20 MB) in a non-shared iCloud Drive folder. Each run showed the identical pattern: Small files (<100 KB) squeeze through before the QUIC session stalls Larger files trigger the deadlock every time 5–6 retries with fresh connectionUUIDs, all failing over protocol=h3 After kill cloudd + nsurlsessiond: immediate flush via protocol=http/1.1 An automated evidence-collection script (collect_h3_deadlock_evidence.sh) captures paired before-kill / after-kill logs. Included in the Feedback report. Symptom Check (for others hitting this) /usr/bin/log show --predicate 'process == "cloudd"' --last 5m 2>&1 \ | grep "putContainer.*err=T.*requestDuration=-1.000.*protocol=h3" | wc -l Output > 0 = this deadlock. Output = 0 = different issue. Recovery (one-liner) kill $(ps -axo user,pid,command | awk -v u="$USER" \ '($1==u && /CloudKitDaemon.framework.*cloudd/ && !/--system/) \ || ($1==u && /\/usr\/libexec\/nsurlsessiond/ && !/--privileged/) \ {print $2}') Both daemons respawn within 1–2 seconds. Do not use killall nsurlsessiond — it would also kill the privileged system instance. What was ruled out Network connectivity (Photos uploaded 8 MB through the same pool simultaneously) iCloud account (metadata operations succeeding, only body uploads failing) File type/content (random data, correlation is with size, not type) Storage quota (1.65 TB free) CFNetworkHTTP3Enabled=false (key is ineffective in 26.4.1) Suggested fixes (from the Feedback report) CFNetwork: Invalidate the QUIC session after N consecutive requestDuration=-1.000 failures CloudKit/NSURLSession: Expose a pool invalidation API like [NSURLSession invalidatePoolEntryForEndpoint:] cloudd: Self-healing retry — create a fresh NSURLSession after M consecutive deadlock-signature failures Finder: At minimum, surface the stuck state to the user instead of failing silently Filed as FB22476701 — includes full reproduction timelines, request/connection UUIDs, sysdiagnose, and a 12-page investigation PDF with architecture diagrams and protocol comparison tables. If you're experiencing the same issue, please file a duplicate referencing FB22476701 — Apple prioritizes by duplicate count. System MacBook Air, macOS 26.4.1 (25E253) iCloud Drive with Desktop & Documents sync en0 (WLAN) + en5 (USB-LAN via Studio Display)

Good morning everyone! Today I have a question about using SwiftData with CloudKit and Widgets. I recently set up my project for SwiftData and CloudKit synchronization, but for some reason, I’m not able to give my Widget access to this data. CloudKit works perfectly fine for my main app, but the Widget only shows placeholder data(the placeholder data which were defined in the get functions as catch, this is sure). I have set the CloudKit capability for my Widget extension and tried fetching data with the get-functions in the code below. I also ensured that the data model files are members of the Widget extension target and that the Widget extension uses the same CloudKit container as the main app. I wondered if it is possible and reasonable to save a copy of my CloudKit data in an App Group container, but in that case, the information shown in the Widget are not always up-to-date, so a solution that fetches data directly from CloudKit would be better. Has anyone had experience with this case? I couldn’t find much information about this problem online. In the code below, many parts have been deleted or altered because they are not relevant to the problem, as they don’t fetch data. The variables, functions, and data models in the code may sometimes have German names, but I hope you can still understand it. Thanks for your help! struct Provider: AppIntentTimelineProvider { //[Placeholder and snapshot] func timeline(for configuration: ConfigurationAppIntent, in context: Context) async -> Timeline<CleverEntry> { let entry = await loadAllVariables() return Timeline(entries: [entry], policy: .after(Date().addingTimeInterval(60 * 5))) } @MainActor private func getExam() -> [PruefungM] { //Old, local version /* guard let modelContainer = try? ModelContainer(for: PruefungM.self) else { return [] } let descriptor = FetchDescriptor<PruefungM>() let PRF = try? modelContainer.mainContext.fetch(descriptor) return PRF ?? [] */ do { let configuration = ModelConfiguration(cloudKitDatabase: .private("iCloud.my_bundle_id")) let container = try ModelContainer( for: PruefungM.self, configurations: configuration ) let descriptor = FetchDescriptor<PruefungM>() return try container.mainContext.fetch(descriptor) } catch { print("❌ Error(CloudKit): \(error)") return [] } } @MainActor private func getHAF() -> [HausaufgabeM] { do { let configuration = ModelConfiguration(cloudKitDatabase: .private("iCloud.my_bundle_id")) let container = try ModelContainer( for: HausaufgabeM.self, configurations: configuration ) let descriptor = FetchDescriptor<HausaufgabeM>() return try container.mainContext.fetch(descriptor) } catch { print("❌ Error (CloudKit): \(error)") return [] } } @MainActor private func loadAllVariables() -> CleverEntry { print("Function started") let HAF = getHAF() let PRF = getExam() //handling and returning the data } }

CloudKit CKRecordZone Deletion Issue Problem: CloudKit record zones deleted via CKDatabase.modifyRecordZones(deleting:) or CKModifyRecordZonesOperation are successfully removed but then reappear. I suspect they are automatically reinstated by CloudKit sync, despite successful deletion confirmation. Environment: SwiftData with CloudKit integration Custom CloudKit zones created for legacy zone-based sharing Observed Behavior: Create custom zone (e.g., "TestZone1") via CKDatabase.modifyRecordZones(saving:) Copy records to zone for sharing purposes Delete zone using any CloudKit deletion API - returns success, no errors Immediate verification: Zone is gone from database.allRecordZones() After SwiftData/CloudKit sync or app restart: Zone reappears Reproduction: Tested with three different deletion methods - all exhibit same behaviour: modifyRecordZones(deleting:) async API CKModifyRecordZonesOperation (fire-and-forget) CKModifyRecordZonesOperation with result callbacks Zone deletion succeeds, change tokens (used to track updates to shared records) cleaned up But zones are restored presumably by CloudKit background sync Expected: Deleted zones should remain deleted Actual: Zones are reinstated, creating orphaned zones

Every time I insert a subclass (MYShapeLayer) into the model context, the app crashes with an error: DesignerPlayground crashed due to fatalError in BackingData.swift at line 908. Never access a full future backing data - PersistentIdentifier(id: SwiftData.PersistentIdentifier.ID(backing: SwiftData.PersistentIdentifier.PersistentIdentifierBacking.managedObjectID(0xb2dbc55f3f4c57f2 <x-coredata://B1E3206B-40DE-4185-BC65-4540B4705B40/MYShapeLayer/p1>))) with Optional(A6CA4F89-107F-4A66-BC49-DD7DAC689F77) struct ContentView: View { @Environment(\.modelContext) private var modelContext @Query private var designs: [MYDesign] var layers: [MYLayer] { designs.first?.layers ?? [] } var body: some View { NavigationStack { List { ForEach(layers) { layer in Text(layer.description) } } .onAppear { let design = MYDesign(title: "My Design") modelContext.insert(design) try? modelContext.save() } .toolbar { Menu("Add", systemImage: "plus") { Button(action: addTextLayer) { Text("Add Text Layer") } Button(action: addShapeLayer) { Text("Add Shape Layer") } } } } } private func addTextLayer() { if let design = designs.first { let newLayer = MYLayer(order: layers.count, kind: .text) newLayer.design = design modelContext.insert(newLayer) try? modelContext.save() } } private func addShapeLayer() { if let design = designs.first { let newLayer = MYShapeLayer(shapeName: "Ellipse", order: layers.count) newLayer.design = design modelContext.insert(newLayer) try? modelContext.save() } } } #Preview { ContentView() .modelContainer(for: [MYDesign.self, MYLayer.self, MYShapeLayer.self], inMemory: true) } @Model final class MYDesign { var title: String = "" @Relationship(deleteRule: .cascade, inverse: \MYLayer.design) var layers: [MYLayer] = [] init(title: String = "") { self.title = title } } @available(iOS 26.0, macOS 26.0, *) @Model class MYLayer { var design: MYDesign! var order: Int = 0 var title: String = "" init(order: Int = 0, title: String = "New Layer") { self.order = order self.title = title } } @available(iOS 26.0, macOS 26.0, *) @Model class MYShapeLayer: MYLayer { var shapeName: String = "" init(shapeName: String, order: Int = 0) { self.shapeName = shapeName super.init(order: order) } }

I am a novice developer, so please be kind. 😬 I am developing a simple macOS app backed with SwiftData and trying to set up iCloud sync so data syncs between two Macs running the app. I have added the iCloud capability, checked the CloudKit box, and selected an iCloud Container. Per suggestion of Paul Hudson, my model properties have either default values or are marked as optional, and the only relationship in my model is marked as optional. @Model final class Project { // Stable identifier used for restoring selected project across launches. var uuid: UUID? var name: String = "" var active: Bool = true var created: Date = Foundation.Date(timeIntervalSince1970: 0) var modified: Date = Foundation.Date(timeIntervalSince1970: 0) // CloudKit requires to-many relationships to be optional in this schema. @Relationship var timeEntries: [TimeEntry]? init(name: String, active: Bool = true, uuid: UUID? = UUID()) { self.uuid = uuid self.name = name self.active = active self.created = .now self.modified = .now self.timeEntries = [] } @Model final class TimeEntry { // Core timing fields. var start: Date = Foundation.Date(timeIntervalSince1970: 0) var end: Date = Foundation.Date(timeIntervalSince1970: 0) var codeRawValue: String? var activitiesRawValue: String = "" // Inverse relationship back to the owning project. @Relationship(inverse: \Project.timeEntries) var project: Project? init( start: Date = .now, end: Date = .now.addingTimeInterval(60 * 60), code: BillingCode? = nil, activities: [ActivityType] = [] ) { self.start = start self.end = end self.codeRawValue = code?.rawValue self.activitiesRawValue = Self.serializeActivities(activities) } I have set up the following in the AppDelegate for registering for remote notifications as well as some logging to console that the remote notification token was received and to be notified when when I am receiving remote notifications. private final class TimeTrackerAppDelegate: NSObject, NSApplicationDelegate { func applicationDidFinishLaunching(_ notification: Notification) { print("📡 [Push] Registering for remote notifications") NSApplication.shared.registerForRemoteNotifications() } func application(_ application: NSApplication, didRegisterForRemoteNotificationsWithDeviceToken deviceToken: Data) { let tokenPreview = deviceToken.map { String(format: "%02x", $0) }.joined().prefix(16) print("✅ [Push] Registered for remote notifications (token prefix: \(tokenPreview)...)") } func application(_ application: NSApplication, didFailToRegisterForRemoteNotificationsWithError error: Error) { let nsError = error as NSError print("❌ [Push] Failed to register for remote notifications: \(nsError.domain) (\(nsError.code)) \(nsError.localizedDescription)") } func application(_ application: NSApplication, didReceiveRemoteNotification userInfo: [String: Any]) { print("📬 [Push] Received remote notification: \(userInfo)") } } In testing, I run the same commit from Xcode on two different Macs logged into the same iCloud account. My problem is that sync is not reliably working. Starting up the app on both Macs shows that the app successfully registered for remote notifications. Sometimes, making an edit on Mac 1 is immediately reflected in Mac 2 UI along with didReceiveRemoteNotification message (all occurring while the Mac 2 app remains in foreground). Sometimes, the Mac 2 app needs to be backgrounded and re-foregrounded before the UI shows the updated data. Sometimes, an edit on Mac 2 will show on Mac 1 only after re-foregrounded but not show any didReceiveRemoteNotification on the Mac 1 console. Sometimes, an edit on Mac 2 will not show at all on Mac 1 even after re-foregrounding the app. Sometimes, no edits sync between either Mac. I had read about how a few years back, there was a bug in macOS where testing iCloud sync between Macs did not work while running from Xcode but would work in TestFlight. For me, running my app in TestFlight on both Macs has never been able to sync any edits between the Macs. Any idea where I might be going wrong. It seems this should not be this hard and should not be failing so inconsistently. Wondering what I might be doing wrong here.

Hi everyone, Im trying to set up CloudKit for my Unreal Engine 5.4 project but seem to be hitting some roadblocks on how to set up the Record Types. From my understanding I need to set up a "file" record type with a "contents" asset field - but even with this it doesn't seem to work :( Any unreal engine devs with some experience on this who could help me out? Thanks!

Background I have an established app in the App Store which has been using NSPersistentCloudkitContainer since iOS 13 without any issues. I've been running my app normally on an iOS device running the iOS 15 betas, mainly to see problems arise before my users see them. Ever since iOS 15 (beta 4) my app has failed to sync changes - no matter how small the change. An upload 'starts' but never completes. After a minute or so the app quits to the Home Screen and no useful information can be gleaned from crash reports. Until now I've had no idea what's going on. Possible Bug in the API? I've managed to replicate this behaviour on the simulator and on another device when building my app with Xcode 13 (beta 5) on iOS 15 (beta 5). It appears that NSPersistentCloudkitContainer has a memory leak and keeps ramping up the RAM consumption (and CPU at 100%) until the operating system kills the app. No code of mine is running. I'm not really an expert on these things and I tried to use Instruments to see if that would show me anything. It appears to be related to NSCloudkitMirroringDelegate getting 'stuck' somehow but I have no idea what to do with this information. My Core Data database is not tiny, but not massive by any means and NSPersistentCloudkitContainer has had no problems syncing to iCloud prior to iOS 15 (beta 4). If I restore my App Data (from an external backup file - 700MB with lots of many-many, many-one relationships, ckAssets, etc.) the data all gets added to Core Data without an issue at all. The console log (see below) then shows that a sync is created, scheduled & then started... but no data is uploaded. At this point the memory consumption starts and all I see is 'backgroundTask' warnings appear (only related to CloudKit) with no code of mine running. CoreData: CloudKit: CoreData+CloudKit: -[PFCloudKitExporter analyzeHistoryInStore:withManagedObjectContext:error:](501): <PFCloudKitExporter: 0x600000301450>: Exporting changes since (0): <NSPersistentHistoryToken - { "4B90A437-3D96-4AC9-A27A-E0F633CE5D9D" = 906; }> CoreData: CloudKit: CoreData+CloudKit: -[PFCloudKitExportContext processAnalyzedHistoryInStore:inManagedObjectContext:error:]_block_invoke_3(251): Finished processing analyzed history with 29501 metadata objects to create, 0 deleted rows without metadata. CoreData: CloudKit: CoreData+CloudKit: -[NSCloudKitMirroringDelegate _scheduleAutomatedExportWithLabel:activity:completionHandler:](2800): <NSCloudKitMirroringDelegate: 0x6000015515c0> - Beginning automated export - ExportActivity: <CKSchedulerActivity: 0x60000032c500; containerID=<CKContainerID: 0x600002ed3240; containerIdentifier=iCloud.com.nitramluap.Somnus, containerEnvironment="Sandbox">, identifier=com.apple.coredata.cloudkit.activity.export.4B90A437-3D96-4AC9-A27A-E0F633CE5D9D, priority=2, xpcActivityCriteriaOverrides={ Priority=Utility }> CoreData: CloudKit: CoreData+CloudKit: -[NSCloudKitMirroringDelegate executeMirroringRequest:error:](765): <NSCloudKitMirroringDelegate: 0x6000015515c0>: Asked to execute request: <NSCloudKitMirroringExportRequest: 0x600002ed2a30> CBE1852D-7793-46B6-8314-A681D2038B38 2021-08-13 08:41:01.518422+1000 Somnus[11058:671570] [BackgroundTask] Background Task 68 ("CoreData: CloudKit Export"), was created over 30 seconds ago. In applications running in the background, this creates a risk of termination. Remember to call UIApplication.endBackgroundTask(_:) for your task in a timely manner to avoid this. 2021-08-13 08:41:03.519455+1000 Somnus[11058:671570] [BackgroundTask] Background Task 154 ("CoreData: CloudKit Scheduling"), was created over 30 seconds ago. In applications running in the background, this creates a risk of termination. Remember to call UIApplication.endBackgroundTask(_:) for your task in a timely manner to avoid this. Just wondering if anyone else is having a similar issue? It never had a problem syncing an initial database restore prior to iOS 15 (beta 4) and the problems started right after installing iOS 15 (beta 4). I've submitted this to Apple Feedback and am awaiting a response (FB9412346). If this is unfixable I'm in real trouble (and my users are going to be livid). Thanks in advance!

I have been working on an app for the past few months, and one issue that I have encountered a few times is an error where quick subsequent deletions cause issues with detached tasks that are triggered from some user actions. Inside a Task.detached, I am building an isolated model context, querying for LineItems, then iterating over those items. The crash happens when accessing a Transaction property through a relationship. var byTransactionId: [UUID: [LineItem]] { return Dictionary(grouping: self) { item in item.transaction?.id ?? UUID() } } In this case, the transaction has been deleted, but the relationship existed when the fetch occurred, so the transaction value is non-nil. The crash occurs when accessing the id. This is the error. SwiftData/BackingData.swift:1035: Fatal error: This model instance was invalidated because its backing data could no longer be found the store. PersistentIdentifier(id: SwiftData.PersistentIdentifier.ID(backing: SwiftData.PersistentIdentifier.PersistentIdentifierBacking.managedObjectID(0xb43fea2c4bc3b3f5 &lt;x-coredata://A9EFB8E3-CB47-48B2-A7C4-6EEA25D27E2E/Transaction/p1756&gt;))) I see other posts about this error and am exploring some suggestions, but if anyone has any thoughts, they would be appreciated.

If I set my build settings "default actor isolation" to MainActor, how do my @ModelActor actors and model classes need to look like ? For now, I am creating instances of my @ModelActor actors and passing my modelContext container and processing all data there. Everything stays in this context. No models are transferred back to MainActor. Now, after changing my project settings, I am getting a huge amount of warnings. Do I need to set all my model classes to non-isolated and the @ModelActor actor as well? Is there any new sample code to cover this topic ... did not find anything for now. Thanks in advance, Marc

I'm working on a new app with SwiftData and now adding CloudKit Sync. Everything is working fine in the simulator against the development CloudKit Schema. I successfully deployed the schema to production. However, the TestFlight builds fail against production. This is what I see in the logs, but I haven't been able to find info on how to fix it. Help appreciated. CoreData+CloudKit: -[NSCloudKitMirroringDelegate _requestAbortedNotInitialized:](2205): <private> - Never successfully initialized and cannot execute request '<private>' due to error: Error Domain=CKErrorDomain Code=2 "CKInternalErrorDomain: 1011" UserInfo={ContainerID=<private>, NSDebugDescription=CKInternalErrorDomain: 1011, CKPartialErrors=<private>, RequestUUID=<private>, NSLocalizedDescription=<private>, CKErrorDescription=<private>, NSUnderlyingError=0x1078e9fe0 {Error Domain=CKInternalErrorDomain Code=1011 UserInfo={CKErrorDescription=<private>, NSLocalizedDescription=<private>, CKPartialErrors=<private>}}} CoreData+CloudKit: -[NSCloudKitMirroringDelegate _performSetupRequest:]_block_invoke(1153): <private>: Successfully set up CloudKit integration for store (<private>): <private> CoreData+CloudKit: -[NSCloudKitMirroringDelegate _enqueueRequest:]_block_invoke(1035): Failed to enqueue request: <private> Error Domain=NSCocoaErrorDomain Code=134417 UserInfo={NSLocalizedFailureReason=<private>}

Hi everyone, Complete newbie here. Building an app and trying to use Cloudkit. I've added the CloudKit capability, triple checked the entitlements file for appropriate keys, made sure the code signing entitlements are pointing to the correct entitlements file. I've removed and cleared all of those settings and even created a new container as well as refreshed the signing. I just can't seem to figure out why I keep getting this error: Significant issue at CKContainer.m:747: In order to use CloudKit, your process must have a com.apple.developer.icloud-services entitlement. The value of this entitlement must be an array that includes the string "CloudKit" or "CloudKit-Anonymous". Any guidance is greatly appreciated.

I have a simple app that makes an HTTPS call to gather some JSON which I then parse and add to my SwiftData database. The app then uses a simple @Query in a view to get the data into a list. on iOS 16 this works fine. No problems. But the same code on iOS 26 (targeting iOS 18.5) crashes after about 15 seconds of idle time after the list is populated. The error message is: Could not cast value of type '__NSCFNumber' (0x1f31ee568) to 'NSString' (0x1f31ec718). and occurs when trying to access ANY property of the list. I have a stripped down version of the app that shows the crash available. To replicate the issue: open the project in Xcode 26 target any iOS 26 device or simulator compile and run the project. after the list is displayed, wait about 15 seconds and the app crashes. It is also of note that if you try to run the app again, it will crash immediately, unless you delete the app from the device. Any help on this would be appreciated. Feedback number FB20295815 includes .zip file Below is the basic code (without the data models) The Best Seller List.Swift import SwiftUI import SwiftData @main struct Best_Seller_ListApp: App { var body: some Scene { WindowGroup { ContentView() } .modelContainer (for: NYTOverviewResponse.self) } } ContentView.Swift import os.log import SwiftUI struct ContentView: View { @Environment(\.modelContext) var modelContext @State private var listEncodedName = String() var body: some View { NavigationStack () { ListsView() } .task { await getBestSellerLists() } } func getBestSellerLists() async { guard let url = URL(string: "https://api.nytimes.com/svc/books/v3/lists/overview.json?api-key=\(NYT_API_KEY)") else { Logger.errorLog.error("Invalid URL") return } do { let decoder = JSONDecoder() var decodedResponse = NYTOverviewResponse() //decode the JSON let (data, _) = try await URLSession.shared.data(from: url) decoder.keyDecodingStrategy = .convertFromSnakeCase decodedResponse = try decoder.decode(NYTOverviewResponse.self, from: data) //remove any lists that don't have list_name_encoded. Fixes a bug in the data decodedResponse.results!.lists = decodedResponse.results!.lists!.filter { $0.listNameEncoded != "" } // sort the lists decodedResponse.results!.lists!.sort { (lhs, rhs) -> Bool in lhs.displayName < rhs.displayName } //delete any potential existing data try modelContext.delete(model: NYTOverviewResponse.self) //add the new data modelContext.insert(decodedResponse) } catch { Logger.errorLog.error("\(error.localizedDescription)") } } } ListsView.Swift import os.log import SwiftData import SwiftUI @MainActor struct ListsView: View { //MARK: - Variables and Constants @Query var nytOverviewResponses: [NYTOverviewResponse] enum Updated: String { case weekly = "WEEKLY" case monthly = "MONTHLY" } //MARK: - Main View var body: some View { List { if nytOverviewResponses.isEmpty { ContentUnavailableView("No lists yet", systemImage: "list.bullet", description: Text("NYT Bestseller lists not downloaded yet")) } else { WeeklySection MonthlySection } } .navigationBarTitle("Bestseller Lists", displayMode: .large) .listStyle(.grouped) } var WeeklySection: some View { let rawLists = nytOverviewResponses.last?.results?.lists ?? [] // Build a value-typed array to avoid SwiftData faulting during sort let weekly = rawLists .filter { $0.updateFrequency == Updated.weekly.rawValue } .map { (name: $0.displayName, encoded: $0.listNameEncoded, model: $0) } .sorted { $0.name < $1.name } return Section(header: Text("Weekly lists to be published on \(nytOverviewResponses.last?.results?.publishedDate ?? "-")")) { ForEach(weekly, id: \.encoded) { item in Text(item.name).font(Font.custom("Georgia", size: 17)) } } } var MonthlySection: some View { let rawLists = nytOverviewResponses.last?.results?.lists ?? [] // Build a value-typed array to avoid SwiftData faulting during sort let monthly = rawLists .filter { $0.updateFrequency == Updated.monthly.rawValue } .map { (name: $0.displayName, encoded: $0.listNameEncoded, model: $0) } .sorted { $0.name < $1.name } return Section(header: Text("Monthly lists to be published on \(nytOverviewResponses.last?.results?.publishedDate ?? "-")")) { ForEach(monthly, id: \.encoded) { item in Text(item.name).font(Font.custom("Georgia", size: 17)) } } } }

Hi, thank you for your reply. I have checked and confirmed that all AppleUser entity fields (id, name, email, password, createdAt) are optional, relationships (posts, comments) are optional, and I assign values when creating a new object, but Core Data still throws a nilError during registration; I have uploaded my project to GitHub for your reference here: https://github.com/Kawiichao/job. If reviewing it requires any payment, please let me know in advance. Thank you very much for your kind offer—I really appreciate it!

Hi all, As you know, when using SwiftData Cloudkit, all relationships are required to be optional. In my app, which is a list app, I have a model class Project that contains an array of Subproject model objects. A Subproject also contains an array of another type of model class and this chain goes on and on. In this type of pattern, it becomes really taxxing to handle the optionals the correct way, i.e. unwrap them as late as possible and display an error to the user if unable to. It seems like most developers don't even bother, they just wrap the array in a computed property that returns an empty array if nil. I'm just wondering what is the recommended way by Apple to handle these optionals. I'm not really familiar with how the CloudKit backend works, but if you have a simple list app that only saves to the users private iCloud, can I just handwave the optionals like so many do? Is it only big data apps that need to worry? Or should we always strive to handle them the correct way? If that's the case, why does it seem like most people skip over them? Be great if an Apple engineer could weigh in.

I have an issue in my app, where the crashing frame is an assertionFailure in BackingData.set inside SwiftData framework. My own app doesn't appear until frame 14. I have no idea what causes this, or even how to create a reproducible project as this only happens on some devices. The frame prior to the assertionFailure is this: #1 (null) in BackingData.set(any:value:) () It seems like there is a backing data encoding happening in my Model class, and some value is causing it to fail. The model being accessed is through a relationship, and the frame in the app crashing is along the lines of Text(parent.child.name) Obviously, something is wrong in how I have made child, but the part that stand out to me is the assertionFailure in a release build

I’m seeing persistent issues with iCloud Drive hydration and Finder sync on a new M4 MacBook Pro running Sequoia 15.5 (24F74). The same folders hydrate correctly on other Macs (Intel and M1), but not on the M4. ✅ Tried: – killall bird – Safe Mode boot – Toggling iCloud Drive and System Settings > Apple ID – Isolating network, user profile, and running First Aid 🔍 Findings: – EtreCheck report shows consistent high CPU usage from bird with no resolution. – Console logs suggest bird is waiting on local metadata index. – No VPNs installed. No third-party sync tools active. I’ve sanitized and attached the EtreCheck report as text for reference (or can paste if needed). ❓ Questions: 1. Is this a known issue on M4 systems or Sequoia 15.5? 2. Could file system ownership have been impacted by command-line tools? 3. Is there a safe method to reset bird metadata or iCloud sync state locally? Any guidance from Apple or other developers would be appreciated. Thanks!

Does the CloudKit participant limit of 100 include the owner?

The CloudKit Console includes a Unique Users table in the Usage section. The numbers here are lower than what I would expect. Does this only track a certain percentage of users, e.g. users have opted in to share analytics with developers?

I have been trying to find out the app limits to my app when released into the app store, I understand that in the public database the app worldwide can use 200g of bandwidth free per month. What happens after that? is it throttled? is there a pricing structure for overages? thanks

i want to save data like images, text,amd mapviews with swiftui. It is only saved but if you delete the app of buy a new iPhone everything is deleted, how can I make if that the information saved on my app is saved even after I update the app, delete the app, or put the app in another iPhone with SwiftUI? i have watched youtube videos and im still confused,please help.