We’re building a usage-based rental flow. The final charge is only known after the session ends (like gas pumps). We want the same Apple Pay UX that gas stations like at a gas station has: the user does not see a pre-authorization amount up front; they only see “approved” and later the final posted amount on the statement. What we observe (gas stations / desired UX) When paying at gas station with Apple Pay (card-present), the user confirms their card (double-tap) but no pre-auth amount is shown in Wallet/notification UI. The small notification is from the bank (not the merchant) and shows only bank + merchant name, no total. After fueling ends, the final amount appears on the statement from the merchant. What happens in our flow (current behavior) Platform: Apple Pay via Stripe (Apple Pay on the Web with QR → mobile Safari Wallet sheet). When a user confirms payment, the pre-authorization amount is shown immediately to the user (appears like a charge from the user’s perspective). We want to avoid showing that amount, matching the pay-at-pump experience.

We have been using ApplePay on the web for years, but we are running into a problem since today in sandbox where domainName is missing from the create payment sessions request. We haven't changed anything related to this request any time recently. Static payment sessions url being hit in sandbox: https://apple-pay-gateway-cert.apple.com/paymentservices/paymentSession request format: "merchantIdentifier": "merchant.com.identifier", "displayName": "Test Store", "initiative": "web", "initiativeContext": "test.example.com", "domainName": "test.example.com" response format: { "epochTimestamp": 1763533367972, "expiresAt": 1763536967972, "merchantSessionIdentifier": "<merchantSessionIdentifier>", "nonce": "<nonce>", "merchantIdentifier": "<merchantIdentifier>", "displayName": "Test Store", "signature": "<signature>", "initiative": "web", "initiativeContext": "test.example.com", "signedFields": [ "merchantIdentifier", "merchantSessionIdentifier", "initiative", "initiativeContext", "displayName", "nonce" ], "operationalAnalyticsIdentifier": "Test Store:<identifier>", "retries": 0, "pspId": "<pspId>" } Production create session request to https://apple-pay-gateway.apple.com/paymentservices/paymentSession is behaving as expected, sending the following fields as response: epochTimestamp, expiresAt, merchantSessionIdentifier, nonce, merchantIdentifier, domainName, displayName, signature, operationalAnalyticsIdentifier, retries, pspId Claude seems to suggest this is a response when Messages for Business is enabled, but this ApplePay Payment Processing merchant is only configured for Apple Pay on the Web. Any ideas or pointers to check for? We are worried this will spill over in production as well, which will break our ApplePay integration. Thanks in advance!

I'm facing problem with in-app-provisioning in production application. When we try to tokenize (before T&C step) we are getting error from topic. I've also posted this in Feedback Assistant: FB18403577. I'll be very happy if someone could help me to get what is wrong with data or configuration of application.

I'm implementing Apple Pay for our application via the Apple Pay JS API, and everything works as expected when initiating a session from a Safari browser. However, when attempting to start a session in a non-Safari browser (Chrome in this case), I see the following behavior: The "Scan Code with iPhone" popup appears I scan the code with my device (9th gen iPad running iPadOS 18.5 if that matters) The Apple Pay view does not appear on the device, and the "Scan Code" popup closes on the browser without any further information given. I can see the messages being passed in the network tab, with the final message being a "getPaymentRequestResponse" message appearing at the time the code is scanned. I suspect merchant validation is failing since that should be the next step, but that's just an educated guess at this point. I would appreciate any help getting this issue resolved.

Hello everyone, We've encountered a blocking issue while integrating Apple Pay on the Web within a Salesforce Commerce Cloud (SFCC) environment. The session fails immediately after a successful user authentication. Problem Summary: After a user authenticates a payment with Touch ID or Face ID, the Apple Pay sheet showing error "Payment not completed" message. The core of the issue is that the onpaymentauthorized event handler is never invoked in our client-side JavaScript. As a result, the corresponding server-side SFCC paymentAuthorized hooks are never triggered, and we cannot obtain a payment token to complete the transaction. Also, No console logs are observed. Observed Flow of Events: The ApplePaySession proceeds correctly through the initial callbacks. We have verified through server-side logs that the corresponding SFCC platform hooks (getRequest, prepareBasket, shippingContactSelected, shippingMethodSelected) fire and complete successfully. The payment sheet correctly updates with shipping costs and the final transaction amount. Failure Point & Steps to Reproduce: A user initiates an Apple Pay transaction within our SFCC site. They select their shipping contact and method. The payment sheet updates the total amount. The user taps the "Pay" button and authenticates successfully via Touch ID / Face ID. Failure: The sheet immediately displays "Payment not completed" error. The onpaymentauthorized event is never fired on the client, and no paymentAuthorized calls reach our SFCC backend. We have confirmed this behavior is reproducible even when using the standard plugin_applepay provided by SFCC. There are no associated errors in the browser's JavaScript console or any server-side logs, as the process appears to fail within the native Apple Pay session before control is returned to our client-side code. Our Questions: Given this is occurring within an SFCC integration, we are trying to understand what could cause the session to terminate at this specific point. Are there internal validation checks that occur after successful user authentication but before the onpaymentauthorized event is dispatched? What configuration issues (e.g., in the ApplePayPaymentRequest, merchant identity certificate, etc.) are known to cause a failure at this exact step, especially within a platform integration like SFCC? Is there any additional client-side logging or debugging we can enable to get more insight into the internal state of the ApplePaySession? Any guidance from Apple engineers or other developers who have integrated Apple Pay with SFCC would be greatly appreciated. Thank you

Hi guys, We are trying to implement a solution that would allow users to subscribe to other users in our app. The system should work the same way as Twitch's subscription model works. Users should be able to subscribe to anyone and each subscription should have different tiers. From what we were able to gather, users cannot have multiples of the same subscription on applestoreconnect. Meaning that we would probably need to make a custom subscription per every user? Here we have also learned that there is a limit of 10 000 types of subscriptions and that it is not possible to dynamically create/delete them for users. (correct me if I am wrong) Is there a solution for handling this type of a scenario? Appreciate all answers.

Hello. we are looking in adding an additional verification method as part of our in app provisioning to apple wallet. the method is called app to app verification method where basically when the customer adds their card (debit or credit) on apple wallet they can be verified through a third party app. does apple support this? where can i find any material related to this?

Description: I’m integrating Apple Pay JS (version 3) into an Angular application. Here are the key details: Environment: Angular (latest) Apple Pay JS v3 Chrome (confirmed window.ApplePaySession is available) application region is in US. I'm in Taiwan and using my iPhone Taiwan account to scan the QR Code/ Implemented Handlers: onvalidatemerchant onpaymentmethodselected onpaymentauthorized oncancel Observed Behavior: When I click the Apple Pay button, the console logs: Failed to execute 'postMessage' on 'DOMWindow': The target origin provided ('https://applepay.cdn-apple.com') does not match the recipient window's origin ('https://{our-domain-name}') Despite this, the QR code still appears. Scanning the QR code with an iPhone 13 Pro running iOS 18.4.1 brings up the Apple Pay sheet with the correct amount, but payment never completes. In the browser, none of my Angular event handlers fire except oncancel. Questions: What causes the postMessage origin mismatch with Apple’s CDN frame, and how should my application handle it? Why doesn’t onpaymentauthorized ever fire, and how can I complete the payment flow so that session.completePayment() succeeds? Any guidance or sample code snippets for a proper merchant-validation and payment-completion sequence in this setup would be greatly appreciated. my code onApplePayButtonClicked() { if (!ApplePaySession) { console.error('[ApplePay] ApplePaySession is not supported'); return; } // Define ApplePayPaymentRequest const request : ApplePayJS.ApplePayPaymentRequest = { countryCode: this.currencyCode, currencyCode: Constants.CountryCodeUS, merchantCapabilities: this.merchantCapabilities, supportedNetworks: this.supportedNetworks, total: { label: this.label, type: "final" as ApplePayJS.ApplePayLineItemType, amount: this.orderAmount.toString(), }, }; // Create ApplePaySession const session = new ApplePaySession(3, request); session.onvalidatemerchant = async event => { console.info('[ApplePay] onvalidatemerchant', event); try { const merchantSession = await fetch(`${this.paymentUrl}/api/applepay/validatemerchant`, { method: 'POST', headers: { 'Content-Type': 'application/json', }, body: JSON.stringify({ PKeyCompany: this.paymentAppleMerchantId, ValidationUrl: event.validationURL }) }).then((r) => r.json()); session.completeMerchantValidation(merchantSession); } catch (error) { console.error('[ApplePay] onvalidatemerchant MerchantValidation error', error); session.abort(); } }; session.onpaymentauthorized = (event) => { console.info('[ApplePay] paymentauthorized', event); const token = event.payment.token; this.paymentTokenEmitted.emit({ token: JSON.stringify(token), paymentType: PaymentOptionType.ApplePay }); session.completePayment(ApplePaySession.STATUS_SUCCESS); }; session.onpaymentmethodselected = (event) => { console.info('[ApplePay] paymentmethodselected', event); const update: ApplePayJS.ApplePayPaymentMethodUpdate = { newTotal: request.total }; session.completePaymentMethodSelection(update); }; session.oncancel = (event) => { console.error('[ApplePay] oncancel', event); this.errorEmitted.emit({ error: 'Apple Pay cancel' }); }; session.begin(); }

We are writing to report a recurring stability issue with the Apple Pay sandbox environment. We are using the official sandbox test cards provided on the Apple Developer website for our testing: https://developer.apple.com/apple-pay/sandbox-testing/ We are experiencing frequent, intermittent failures when attempting to add these sandbox cards to the Wallet for testing purposes. The issue typically occurs a couple of times per day. When the failure occurs, the card provisioning process fails unexpectedly. The issue is not limited to a single card; we have observed this behavior across all available card networks. In some instances, all cards (Visa, Mastercard, Discover, Amex) fail to provision simultaneously. At other times, the issue appears to be isolated to specific networks while others work correctly. Crucially, the issue appears to be temporary. After some time passes (ranging from minutes to an hour), we are able to add the exact same card successfully without making any changes to our test environment or configuration. We have diligently checked our setup to rule out configuration errors on our end. This includes verifying: The device is set to a supported region. We are signed in with a valid sandbox tester Apple ID. All other prerequisites for sandbox testing are met. The fact that the process works correctly at other times strongly suggests that this is a server-side stability issue within the Apple Pay sandbox environment rather than a persistent misconfiguration on our part. To help with your investigation, we have attached an image that demonstrates a failed attempt to add a card. Could you please investigate the stability of the sandbox card provisioning service? Please let us know if this is a known issue or if there is any further information we can provide. Thank you for your time and assistance.

I am facing a problem of payment using credit card. I tried several banks and cards without any result. I also used one of the card I have successfully paid another account. Heeeeelp

I tried to test In-App Provisioning in Production for our whitelisted app through TestFlight (Internal Testing Track) and we received the following error response from PassBook during the provisioning attempt, Could you please guide us? Error Response from sysdiagnose PassBookUIService during In-App Provisioning attempt: { statusCode = 500; statusMessage = "Broker Service Response exception"; } I reported the error in Feedback Assistant: ID: FB16112348 (500 Broker Service Response exception during Apple Pay In-App Provisioning ). Note:- I am reffering to Getting Started with Apple Pay: In-App Provisioning, Verification, Security, and Wallet Extensions

Does anyone know how to register as a psp for apple pay. My psp is based in the UAE and I cant seem to find an easy way to enroll the psp to apple pay

Hi, I understand that it's possible to add a virtual debit or credit card from a mobile app into the iOS Wallet using PassKit from the Apple SDK. However, I haven't come across documentation on how to achieve this directly from a web app. I found this article on Apple's support site (https://support.apple.com/en-gb/guide/security/secdc2567239/web), which mentions adding cards from a card issuer’s website, but it doesn’t provide details on the process. Could you please confirm if it's possible to add a card directly from a web app without using a mobile app? If so, could you guide me to the relevant documentation? Thanks in advance!

Hello all, I’m helping a customer integrate Apple Pay, and I’m seeing a behavior I can’t fully explain. I hope someone here can help clarify whether this is expected or whether it’s a bug / misconfiguration on my side. Currency: RSD (Serbian Dinar) Amount: 3.45 RSD (two decimals) Result: Apple Pay cancels the payment automatically when the amount includes decimals, without even displaying the paymentsheet. Things I have checked: ISO 4217 defines RSD with 2 minor units, so fractional amounts like 3.45 should be valid. Processors treat RSD as a two-decimal currency. Apple’s documentation does not provide a per-currency decimal rule table. In testing, whole-number RSD amounts succeed, while fractional amounts (e.g. 3.45 RSD) fail. I did not encounter this problem with other currencies like EUR, USD. Has anyone encountered this issue before?

I recently created a Sandbox account and successfully added an Apple Pay test MasterCard to the sandbox Wallet to run a test. Yesterday, I created a different account and tried to add a MasterCard on another device, but I received a "Card device limit" error. I then deleted the card from the original device (where it had been successfully added) and tried to re-add it, but this device also failed. I was able to confirm that a JCB card can be added, but I need to test with MasterCard. What should I do to resolve this?

I have a problem generating the domain certificate for a merchant id it gives me an error but when using the URL that Apple uses to validate said within the .well-known if the file can be loaded

We rely on ApplePaySession.applePayCapabilities() to decide whether to show the Apple Pay button. We use two different merchant IDs for non-prod/prod environments, and encountered a change in behavior where this API now returns different results. These merchant IDs are generated from a third-party provider Adyen. However, Adyen has informed us that they are unable to identify the root cause of the issue and advised us to seek assistance directly from Apple Pay support. Timeline Last known working date: 13/08/2025 Issue first noticed: 18/08/2025 Environment Details Apple Pay JS API version 1.latest Browsers Tested: Third party browsers including Chrome/139.0.0.0, Firefox/141.0 Browsers with ApplePaySession built-in (like iOS Chrome, iOS Safari, and macOS Safari) are working fine Framework Stack: Angular v18.1.3 (important) no configuration setup in Apple dev account, merchantId is generated from a third-party provider Adyen. Current Execution Flow: Apple Pay JS API script element is injected <script type="text/javascript" async="" src="https://applepay.cdn-apple.com/jsapi/1.latest/apple-pay-sdk.js"></script> Triggers below to check apple pay readiness, different ${merchantId_credential} is used: await window.ApplePaySession.applePayCapabilities(`${merchantId_credential}`); (**ApplePaySession is a valid object at this point) Observed that different paymentCredentialStatus is returned // nonprod env { "paymentCredentialStatus": "applePayUnsupported" // unexpected } // prod env { "paymentCredentialStatus": "paymentCredentialStatusUnknown" } The same code is executed in each environment and the behaviour was also the same, but has changed since then. Side notes By checking the SDK’s internal code, we saw that in third-party browsers it makes an extra call to the following endpoint. Responses from this call also come back differently depending on the merchantId. When invoking below: curl -X POST \ https://smp-paymentservices.apple.com/paymentservices/v3/checkStatus/merchant/{merchantId} \ -H 'Content-Type: application/json' \ -d '{ "initiative": "web", "initiativeContext": "env_specific_domain" }' Our non-prod environment returns {"registered":false} while using prod's merchantId and domain it returns {"registered":true}. We thought the issue might be domain-related since the environments are on different domains, but so far, no luck. The main questions we're looking to resolve are: Why did the behavior change at a certain point despite no code changes? How should we approach this investigation, and what specific requests should we be making to the Adyen team? Why does the response from the call to https://smp-paymentservices.apple.com/paymentservices/v3/checkStatus/merchant/{merchantId} return different results? Perhaps this could provide a clue regarding the question above? We noticed that canMakePayments() is returning true, so we could consider using that as a workaround. Would it be safe to change the source of truth relying on canMakePayments() for displaying Apple Pay? There is a concern that this issue may also occur in our production environment, so we would appreciate assistance in understanding what is happening and finding a resolution.

This error occurs in Apple Pay Wallet In-App Provisioning Flow for Credit / Debit Cards When the data received from the PNO (Visa) is passed to PKAddPaymentPassRequest this error is seen in addPaymentPassViewController, in the finalize stage. Docs provide no clue as to what could be wrong. iOS 18.2.1 XCode 15.2 Error description mentions "unsupportedVersionError" Is the pass version not supported? Is the wallet version not supported? Is it an app implementation error or error in the data received from the PNO?

Hi, I’m encountering an issue in my app’s Wallet Extension, specifically within the Non-UI Extension, where we are unable to retrieve payment passes bound to a user’s account. The same code that successfully retrieves these bound cards in the main app does not work when used in the Non-UI Extension. Case-ID: 8932090 Steps to Reproduce: Set up In-App Provisioning: Ensure that the app has the necessary In-App Provisioning permissions. This functionality works correctly in the main app, confirming that the permissions are properly configured. Configure Wallet Extensions: Follow the Wallet Extensions documentation to configure the app, including all required settings for the Non-UI Extension. Add Code to Retrieve Payment Passes: In the main app’s LoginView, implement the following code in the handleLogin() method to retrieve payment passes: // Get the identifiers of payment passes that already exist in Apple Pay. paymentPassLibrary = self.passLibrary.passes(of: .secureElement) for pass in paymentPassLibrary { if let identifier = pass.secureElementPass?.primaryAccountIdentifier { if pass.isRemotePass && pass.deviceName.localizedCaseInsensitiveContains("Apple Watch") { remotePassIdentifiers.insert(identifier) } else if !pass.isRemotePass { passIdentifiers.insert(identifier) } } } Verify Functionality in Main App: Run the app and verify that the code successfully retrieves the payment passes bound to the user’s account. Implement Code in Non-UI Extension: Add the same code to the Non-UI Extension, specifically in the WNonUIExtHandler class within the override func status(completion: @escaping (PKIssuerProvisioningExtensionStatus) -> Void) method. Test in Wallet Extension: Run the Wallet Extension and observe that the payment passes are not retrieved when the code is executed in the Non-UI Extension. Has anyone encountered a similar issue or can provide insight into why the code might not work in the Non-UI Extension compared to the main app? Support Information: iOS Version: 17.5.1 Development environment: Xcode 15.4 (15F31d), macOS 14.3 (23D56) Any help or suggestions would be greatly appreciated. Thank you!

I am adding In-App provisioning to my app. I am able to access the Apple Pay Sandbox and I have successfully tested adding a secure element/payment pass to Apple Wallet. However, once the pass has been added to the wallet, I can not access or retrieve the pass from my app. I have confirmed with the PNO that the PNO Pass Metadata Configuration in the testing environment include the correct metadata for "associatedApplicationIdentifiers" and "associatedStoreIdentifiers". Does anyone know why I am having this issue and how I can resolve it? Steps used to access pass in Apple Wallet I am unable to view the pass when I attempt to access it using the PKPassLibrary function as follows: let library = PKPassLibrary() if #available(iOS 13.4, *) { // This returns an empty array library.passes(of: .secureElement) } else { // This also returns an empty array library.passes(of: .payment) } // This returns an empty array too library.passes() Steps used to add pass to Apple Wallet These are the steps I follow to add the card: I create a PKAddPaymentPassRequestConfiguration I use this config to instantiate a PKAddPaymentPassViewController. I provide the nonce, nonceSignature, and certificates to my PNO along with the card data. I receive the activationData, encryptedPassData, and ephemeralPublicKey from my PNO and create a PKAddPaymentPassRequest using this data. I add the pass to Apple Wallet. In the addPaymentPassViewController callback, I am able to view the pass data from the .didFinishAdding pass: PKPaymentPass? variable. I am also able to see that the pass has been added from Apple Wallet app. I am not able to access the pass using PKPassLibrary().passes() at this point. I am not able to access the pass at any point after adding it either.