Among Japanese end users, audio issues during screen recording—primarily in game applications—have become a topic of discussion. We have confirmed that the trigger for this issue is highly likely to be related to changes to IOBufferDuration. When using setPreferredIOBufferDuration and the IOBufferDuration is set to a value smaller than the default, audio problems occur in the recorded screen capture video. Audio playback is performed using AudioUnit (RemoteIO). https://developer.apple.com/documentation/avfaudio/avaudiosession/setpreferrediobufferduration(_:)?language=objc This issue was not observed on iOS 18, and it appears to have started occurring after upgrading to iOS 26. We provide an audio middleware solution, and we had incorporated changes to IOBufferDuration into our product to achieve low-latency audio playback. As a result, developers using our product as well as their end users are being affected by this issue. We kindly request that this issue be investigated and addressed in a future update. “This document has been translated by AI. The original text is included below for reference.” 日本のエンドユーザー間で主にゲームアプリケーションにおける画面収録時の音声の問題が話題になっています。 こちらの症状のトリガーが、IOBufferDurationの変更によるものである可能性が高いことを確認しました。 setPreferredIOBufferDurationを使用し、IOBufferDurationがデフォルトより小さい状態の時、画面収録された動画の音声に問題が発生することをしています。 音声の再生にはAudioUnit(RemoteIO)を使用しています。 https://developer.apple.com/documentation/avfaudio/avaudiosession/setpreferrediobufferduration(_:)?language=objc iOS 18ではこのような問題は確認されておらず、iOS26になってから問題が発生しているようです。 私たちはオーディオミドルウェアを提供しており、低遅延の再生のためにIOBufferDurationの変更を製品に組み込んでいました。 そのため、弊社製品をご利用いただいている開発者およびエンドユーザーの皆様がこの不具合の影響を受けています。 こちらの不具合の調査及び修正対応を検討いただけますでしょうか。

Hi everyone! I’ve been working with AVFoundation and trying to use the AVMetricEventStreamPublisher to discover media performance metrics, as described in the Apple documentation. https://developer.apple.com/cn/videos/play/wwdc2024/10113/?time=508 However, when following the example code, I’m not getting the expected results. The performance metrics for both audio and video don’t seem to be captured properly. Has anyone successfully used this example code? If so, could you share your experience or any solutions you’ve found? Any tips or insights would be greatly appreciated. Thanks in advance! Ps. the example code: AVPlayerItem *item = ... AVMetricEventStream *eventStream = [AVMetricEventStream eventStream]; id subscriber = [[MyMetricSubscriber alloc] init]; [eventStream setSubscriber:subscriber queue:mySerialQueue] [eventStream subscribeToMetricEvent:[AVMetricPlayerItemLikelyToKeepUpEvent class]]; [eventStream subscribeToMetricEvent:[AVMetricPlayerItemPlaybackSummaryEvent class]]; [eventStream addPublisher:item];

I'm using this library: https://github.com/Yummypets/YPImagePicker to capture photos. I've modified it slightly, and I'm using an older version. When testing on my iPhone 16e, ios 26, whenever I take a photo, I get the following two error messages: <<<< FigXPCUtilities >>>> signalled err=-17281 at <>:302 <<<< FigCaptureSourceRemote >>>> Fig assert: "err == 0 " at bail (FigCaptureSourceRemote.m:569) - (err=-17281) These error messages appear, but as far as I can tell, the photo comes through OK, and I can save the data no problem. I've even removed all my handling code to see if it was something I was doing. I don't really want to ship with these errors showing, but I also have no idea what can be causing this error to appear. chatgpt was not helpful diagnosing this. Does anyone know what can cause this error Is there a way I can see the source code to figure out if there's something I'm doing wrong here? It really seems like this is an internal apple error, or else I would have expected more details on the error relating to the code I've written. Any clues would be appreciated!

On iOS 26.1, this throws on the 2020 iPad Pro (4th gen) but works fine on an M4 iPad Pro or iPhone 15 Pro: guard let device = AVCaptureDevice.default(.builtInLiDARDepthCamera, for: .video, position: .back) else { throw ConfigurationError.lidarDeviceUnavailable } It's just the standard code from Apple's own sample code so obviously used to work: https://developer.apple.com/documentation/AVFoundation/capturing-depth-using-the-lidar-camera Does it fail because Apple have silently dumped support for the older LiDAR sensor used prior to the M4 iPad Pro, or is there another reason? What about the 5th and 6th gen iPad Pro, does it still work on those?

In my app, I use api provided in Photos framework to delete specified photo. But after upgrading to iOS 26, the delete function in some iOS device no longer work. The api will never triggers the system confirmation dialog, and the completionHandler is never called. In the iOS Photos app, deletion works correctly on the same assets, but calling the API from my app does not work. Steps to Reproduce Make sure the app has Full Photo Library Access. Execute the following code: PHPhotoLibrary.shared().performChanges({ let assetsToBeDeleted = PHAsset.fetchAssets(withLocalIdentifiers: delUrls, options: nil) PHAssetChangeRequest.deleteAssets(assetsToBeDeleted) }, completionHandler: completionHandler) Expected Behavior The system should present a confirmation dialog asking the user to delete the selected photos. After the user confirms, the deletion should occur, and the completionHandler should be called with success or error. Actual Behavior The system delete confirmation dialog does not appear. The completionHandler is never called. Environment iOS Versions: 26.1 / 26.0.1 It looks like api bug. I want to check Is it a know issue and will be fixed. Thanks

Hi, I'm a fan of the gallery in vision pro which has video as well as still photography but I'm wondering if Apple has considered adding the projected media tags to heic so that we can go that next step from Spatial photos to Immersive photos. I have a device that can give me 12k x 6k fisheye images in HDR, but it can't do it at a framerate or resolution that's good enough for video, so I want to cut my losses and show off immersive photos instead. Is there something Apple is already working on for APMP stills or should I create my own app that reads metadata inside a HEIC that I infer in a similar way to the demo "ProjectedMediaConversion" is doing for Video. It would be great to have 180VR photos, which could show as Spatial in a gallery view, but going immersive would half-surround you instead of floating in the blurred view. I think that would be a pretty amazing effect.

I'm writing a program to control a PTZ camera connected via USB. I can get access to target camera's unique_id, and also other infos provided by AVFoundation. But I don't know how to locate my target USB device to send a UVC ControlRequest. There's many Cameras with same VendorID and ProductID connected at a time, so I need a more exact way to find out which device is my target. It looks that the unique_id provided is (locationID<<32|VendorID<<16|ProductID) as hex string, but I'm not sure if I can always assume this behavior won't change. Is there's a document declares how AVFoundation generate the unique_id for USB camera, so I can assume this convert will always work? Or is there's a way to send a PTZ control request to AVCaptureDevice? https://stackoverflow.com/questions/40006908/usb-interface-of-an-avcapturedevice I have seen this similar question. But I'm worrying that Exacting LocationID+VendorID+ProductID from unique_id seems like programming to implementation instead of interface. So, if there's any other better way to control my camera? here's my example code for getting unique_id: // // camera_unique_id_test.mm // // 测试代码：使用C++获取当前系统摄像头的AVCaptureDevice unique_id // // 编译命令: // clang++ -framework AVFoundation -framework CoreMedia -framework Foundation // camera_unique_id_test.mm -o camera_unique_id_test // #include <iostream> #include <string> #include <vector> #import <AVFoundation/AVFoundation.h> #import <Foundation/Foundation.h> struct CameraInfo { std::string uniqueId; }; std::vector<CameraInfo> getAllCameraDevices() { std::vector<CameraInfo> cameras; @autoreleasepool { NSArray<AVCaptureDevice*>* devices = [AVCaptureDevice devicesWithMediaType:AVMediaTypeVideo]; AVCaptureDevice* defaultDevice = [AVCaptureDevice defaultDeviceWithMediaType:AVMediaTypeVideo]; // 遍历所有设备 for (AVCaptureDevice* device in devices) { CameraInfo info; // 获取unique_id info.uniqueId = std::string([device.uniqueID UTF8String]); cameras.push_back(info); } } return cameras; } int main(int argc, char* argv[]) { std::vector<CameraInfo> cameras = getAllCameraDevices(); for (size_t i = 0; i < cameras.size(); i++) { const CameraInfo& camera = cameras[i]; std::cout << " 设备 " << (i + 1) << ":" << std::endl; std::cout << " unique_id: " << camera.uniqueId << std::endl; } return 0; } and here's my code for UVC control: // clang++ -framework Foundation -framework IOKit uvc_test.cpp -o uvc_test #include <iostream> #include <CoreFoundation/CoreFoundation.h> #include <IOKit/IOCFPlugIn.h> #include <IOKit/IOKitLib.h> #include <IOKit/IOMessage.h> #include <IOKit/usb/IOUSBLib.h> #include <IOKit/usb/USB.h> CFStringRef CreateCFStringFromIORegistryKey(io_service_t ioService, const char* key) { CFStringRef keyString = CFStringCreateWithCString(kCFAllocatorDefault, key, kCFStringEncodingUTF8); if (!keyString) return nullptr; CFStringRef result = static_cast<CFStringRef>( IORegistryEntryCreateCFProperty(ioService, keyString, kCFAllocatorDefault, kIORegistryIterateRecursively)); CFRelease(keyString); return result; } std::string GetStringFromIORegistry(io_service_t ioService, const char* key) { CFStringRef cfString = CreateCFStringFromIORegistryKey(ioService, key); if (!cfString) return ""; char buffer[256]; Boolean success = CFStringGetCString(cfString, buffer, sizeof(buffer), kCFStringEncodingUTF8); CFRelease(cfString); return success ? std::string(buffer) : std::string(""); } uint32_t GetUInt32FromIORegistry(io_service_t ioService, const char* key) { CFStringRef keyString = CFStringCreateWithCString(kCFAllocatorDefault, key, kCFStringEncodingUTF8); if (!keyString) return 0; CFNumberRef number = static_cast<CFNumberRef>( IORegistryEntryCreateCFProperty(ioService, keyString, kCFAllocatorDefault, kIORegistryIterateRecursively)); CFRelease(keyString); if (!number) return 0; uint32_t value = 0; CFNumberGetValue(number, kCFNumberSInt32Type, &value); CFRelease(number); return value; } int main() { // Get matching dictionary for USB devices CFMutableDictionaryRef matchingDict = IOServiceMatching(kIOUSBDeviceClassName); // Get iterator for matching services io_iterator_t serviceIterator; IOServiceGetMatchingServices(kIOMasterPortDefault, matchingDict, &serviceIterator); // Iterate through matching devices io_service_t usbService; while ((usbService = IOIteratorNext(serviceIterator))) { uint32_t locationId = GetUInt32FromIORegistry(usbService, "locationID"); uint32_t vendorId = GetUInt32FromIORegistry(usbService, "idVendor"); uint32_t productId = GetUInt32FromIORegistry(usbService, "idProduct"); IOCFPlugInInterface** plugInInterface = nullptr; IOUSBDeviceInterface** deviceInterface = nullptr; SInt32 score; // Get device plugin interface IOCreatePlugInInterfaceForService(usbService, kIOUSBDeviceUserClientTypeID, kIOCFPlugInInterfaceID, &plugInInterface, &score); // Get device interface (*plugInInterface) ->QueryInterface(plugInInterface, CFUUIDGetUUIDBytes(kIOUSBDeviceInterfaceID), (LPVOID*)&deviceInterface); (*plugInInterface)->Release(plugInInterface); // Try to find UVC control interface using CreateInterfaceIterator io_iterator_t interfaceIterator; IOUSBFindInterfaceRequest interfaceRequest; interfaceRequest.bInterfaceClass = kUSBVideoInterfaceClass; // 14 interfaceRequest.bInterfaceSubClass = kUSBVideoControlSubClass; // 1 interfaceRequest.bInterfaceProtocol = kIOUSBFindInterfaceDontCare; interfaceRequest.bAlternateSetting = kIOUSBFindInterfaceDontCare; (*deviceInterface) ->CreateInterfaceIterator(deviceInterface, &interfaceRequest, &interfaceIterator); (*deviceInterface)->Release(deviceInterface); io_service_t usbInterface = IOIteratorNext(interfaceIterator); IOObjectRelease(interfaceIterator); if (usbInterface) { std::cout << "Get UVC device with:" << std::endl; std::cout << "locationId: " << std::hex << locationId << std::endl; std::cout << "vendorId: " << std::hex << vendorId << std::endl; std::cout << "productId: " << std::hex << productId << std::endl << std::endl; IOObjectRelease(usbInterface); } IOObjectRelease(usbService); } IOObjectRelease(serviceIterator); }

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.

Hi all, I'm working on a custom Metal-based video pipeline using AVCaptureVideoDataOutput, and I've run into an unexpected issue related to exposure. Setup: I'm capturing video frames using kCVPixelFormatType_420YpCbCr8BiPlanarFullRange. In my Metal shader, I: Convert YCbCr (full range Rec.709) to linear Rec.709 RGB. Apply Rec.709 → sRGB gamma encoding. Output to .bgra8Unorm_srgb via MTKView. Everything renders correctly in terms of colorspace math, but the image appears significantly brighter (~+3 stops EV) compared to AVCaptureVideoPreviewLayer and the native iOS Camera app under the same camera exposure settings. What I’ve verified: The color transforms are correct: YCbCr709 to RGB, then linear to sRGB. I'm not applying any tone mapping or aggressive look LUTs yet. Camera exposure is locked using: device.setExposureModeCustom(duration: ..., iso: ...) The same EV (e.g., ISO 50, 1/125s, f/5.6) on my iPhone appears visually 3 stops brighter than on my digital cameras (Sony/Canon etc). To match the look of the preview layer or camera app, I have to simulate a ~–3 EV shift in my custom pipeline. Questions: Is AVCaptureVideoPreviewLayer applying extra tone mapping, digital gain, or contrast shaping (like OOTF etc)? Does the camera ISP expose "hotter" (i.e., with more light) internally for the preview layer than what we get in video frame buffers? Is there a standard way to compensate for this ISP behavior in custom pipelines using AVCaptureVideoDataOutput? Can this be accounted for using metadata (e.g., exposure bias, gain, gamma curve)?

I'm developing a photo backup app. To detect newly added or edited photos since the app launched, I keep a local dictionary in the format [localIdentifier: modification_date]. However, PHAsset.modificationDate is not reliable. It often changes unexpectedly, possibly due to system operations like iCloud metadata updates. Is there a more reliable way to detect whether a photo has been modified by user since the last app launch? I'm thinking about using content hash instead, but I'm not sure how heavy this operation is in terms of performance.

I have a new 2725QC (Dell) Monitor that uses USB-C connection to connect with the iMac (2019, 27 inch) through the back port but the problem is that the volume control can currently only be done from the hardware, not the software control using the Apple keyboard. What should I do in terms of writing code to do this (Swift or Obj-C)? Is there a third-party solution for Intel iMac and ARM Mac?

After upgrading to iOS 18.4, I'm no longer able to establish an AirPlay v1 connection to an audio system. The symptom is that the AirPlay route picker just spins when trying to connect to an audio system. It eventually gives up. I tested this on an iPhone 14, connecting to a HomePod, AirPort express, AppleTV and a Wiim Pro. If I try connecting with AirPlay v2, ex: using Apple Music, the connection succeeds and audio can be played. I'm the developer of an app that plays audio over AirPlay while also recording. My app has to use AirPlay v1 because AvAudioSession doesn't allow the policy .longFormAudio when the category is .playAndRecord. This issue is a real pain as it means my app is suddenly broken for many thousands of users. Is anyone else seeing this issue? Any suggestions for a workaround?

I occasionally receive reports from users that photo import from the Photos library gets stuck and the progress appears to stop indefinitely. I’m using the following APIs (code to be added): func fetchAsset(_ asset: PHAsset) { let options = PHImageRequestOptions() options.deliveryMode = .highQualityFormat options.resizeMode = .exact options.isSynchronous = false options.isNetworkAccessAllowed = true options.progressHandler = { (progress, error, stop, info) in // 🚨 never called } let requestId = PHImageManager.default().requestImageDataAndOrientation( for: asset, options: options ) { data, _, _, info in // 🚨 never called } } Due to repeated reports, I added detailed logs inside the callback closures. Based on the logs, it looks like the request keeps waiting without any callbacks being invoked — neither the progressHandler nor the completion block of requestImageDataAndOrientation is called. This happens not only with the PHImageManager approach, but also when using PHAsset with PHContentEditingInputRequestOptions — the completion callback is not invoked as well. func fetchAssetByContentEditingInput(_ asset: PHAsset) { let options = PHContentEditingInputRequestOptions() options.isNetworkAccessAllowed = true asset.requestContentEditingInput(with: nil) { contentEditingInput, info in // 🚨 never called } } I suspect this is related to iCloud Photos. Here is what I confirmed from affected users: 1. Using the native picker, iCloud download proceeds normally and the photo can be attached. However, using the PHImageManager-based approach in my app, the same photo cannot be attached. 2. Even after verifying that the photo has been fully downloaded from iCloud (e.g., by trying “Export Unmodified Originals” in the Photos app as described here: https://support.apple.com/en-us/111762, and confirming the iCloud download progress completed), the callback is still not invoked for that asset. Detailed flow for (1): • I asked the user to attach the problematic photo (the one where callbacks never fire) using the native photo picker (UIImagePickerController). • The UI showed “Downloading from iCloud” progress. • The progress advanced and the photo was attached successfully. • Then I asked the user to attach the same photo again using my custom photo picker (which uses the PHImageManager APIs mentioned above). • The progress did not advance. • No callbacks were invoked. • The operation waited indefinitely and never completed. Workaround / current behavior: • If I ask users to force-quit and relaunch the app and try again, about 6 out of 10 users can attach successfully afterward. • The remaining ~4 out of 10 users still cannot attach even after relaunching. • For users who are not fixed immediately after relaunch, it seems to resolve naturally after some time. I’ve seen similar reports elsewhere, so I’m wondering if Apple is already aware of an internal issue related to this. If there is any known information, guidance, or recommended workaround, I would appreciate it. I also logged the properties of affected PHAssets (metadata) when the issue occurs, and I can share them below if that helps troubleshooting: [size=3.91MB] [PHAssetMediaSubtype(rawValue: 528)+DepthEffect | userLibrary | (4284x5712) | adjusted=true] [size=3.91MB] [PHAssetMediaSubtype(rawValue: 528)+DepthEffect | userLibrary | (4284x5712) | adjusted=true] [size=2.72MB] [PHAssetMediaSubtype(rawValue: 16)+DepthEffect | userLibrary | (3024x4032) | adjusted=true] [size=2.72MB] [PHAssetMediaSubtype(rawValue: 16)+DepthEffect | userLibrary | (3024x4032) | adjusted=true] [size=2.49MB] [PHAssetMediaSubtype(rawValue: 16)+DepthEffect | userLibrary | (3024x4032) | adjusted=true] [size=2.49MB] [PHAssetMediaSubtype(rawValue: 16)+DepthEffect | userLibrary | (3024x4032) | adjusted=true]

I have a question regarding the behavior of AVAudioSession.sharedInstance().outputVolume. Observed behavior: When the app is in the foreground, I read audioSession.outputVolume (for example, 0.1). The app is then moved to the background. While the app is in the background, the user changes the system volume using the hardware buttons (for example, to 0.5). When the app returns to the foreground, audioSession.outputVolume still reports the previous value (0.1). From my testing, outputVolume only seems to update when the system volume is changed while the app is in the foreground. Volume changes made while the app is in the background are not reflected when the app returns to the foreground. Questions: According to Apple’s documentation for AVAudioSession.outputVolume: “The systemwide output volume set by the user.” https://developer.apple.com/documentation/avfaudio/avaudiosession/outputvolume However, based on our testing on iOS 18.6.2 and iOS 18.1, the observed behavior seems to differ from this description. Questions: The documentation states that outputVolume represents the system-wide volume set by the user. In our testing, the value does not reflect volume changes made while the app is in the background and only updates when the app is in the foreground.Is this the expected behavior of AVAudioSession.outputVolume? Is there any other recommended way in Swift to retrieve the current system volume that reflects user changes made both while the app is in the foreground and while it is in the background? Any clarification on the intended behavior or recommended handling would be greatly appreciated.

Hi all, with my app ScreenFloat, you can record your screen, along with system- and microphone audio. Those two audio feeds are recorded into separate audio tracks in order to individually remove or edit them later on. Now, these recordings you create with ScreenFloat can be drag-and-dropped to other apps instantly. So far, so good, but some apps, like Slack, or VLC, or even websites like YouTube, do not play back multiple audio tracks, just one. So what I'm trying to do is, on dragging the video recording file out of ScreenFloat, instantly baking together the two individual audio tracks into one, and offering that new file as the drag and drop file, so that all audio is played in the target app. But it's slow. I mean, it's actually quite fast, but for drag and drop, it's slow. My approach is this: "Bake together" the two audio tracks into a one-track m4a audio file using AVMutableAudioMix and AVAssetExportSession Take the video track, add the new audio file as an audio track to it, and render that out using AVAssetExportSession For a quick benchmark, a 3'40'' movie, step 1 takes ~1.7 seconds, and step two adds another ~1.5 seconds, so we're at ~3.2 seconds. That's an eternity for a drag and drop, where the user might cancel if there's no immediate feedback. I could also do it in one step, but then I couldn't use the AV*Passthrough preset, and that makes it take around 32 seconds then, because I assume it touches the video data (which is unnecessary in this case, so I think the two-step approach here is the fastest). So, my question is, is there a faster way? The best idea I can come up with right now is, when initially recording the screen with system- and microphone audio as separate tracks, to also record both of them into a third, muted, "hidden" track I could use later on, basically eliminating the need for step one and just ripping the two single audio tracks out of the movie and only have the video and the "hidden" track (then unmuted), but I'd still have a ~1.5 second delay there. Also, there's the processing and data overhead (basically doubling the movie's audio data). All this would be great for an export operation (where one expects it to take a little time), but for a drag-and-drop operation, it's not ideal. I've discarded the idea of doing a promise file drag, because many apps do not accept those, and I want to keep wide compatibility with all sorts of apps. I'd appreciate any ideas or pointers. Thank you kindly, Matthias

I'm getting this error when I launch my application on the iPhone 14 Pro via Xcode. Everything builds OK. I"m using the audio kit plugin and Sound Pipe Audiokit. The error starts as soon as I start the app and will carry on repeatedly. I have background processing turned on as I'd like the sounds to play when the phone is locked via the headphones. I can't find anything online about this error. None of my catches are printing anything in the logs either. So I don't know if this is just something that pops up repeatedly or whether there is something fundamentally wrong. private func setupAudioSession() { do { let session = AVAudioSession.sharedInstance() try session.setCategory(.playback, mode: .default, options: [.mixWithOthers]) try session.setActive(true, options: .notifyOthersOnDeactivation) } catch { errorMessage = "Failed to set up audio session: (error.localizedDescription)" print(errorMessage ?? "") } } // MARK: - Background Task Handling private func setupBackgroundTaskHandling() { // Handle app entering background notificationObservers.append( NotificationCenter.default.addObserver( forName: UIApplication.didEnterBackgroundNotification, object: nil, queue: .main, using: { [weak self] _ in // Safely unwrap self guard let self = self else { return } self.handleBackgroundTransition() } ) ) I'm not sure if this is the code causing the issue. Any help would be gratefully appreciated. This is my first app I'm working on .

Issue: After iOS 18.5 release, our app is experiencing a significant increase in AVCaptureSessionInterruptionReason.videoDeviceNotAvailableWithMultipleForegroundApps errors. Details: Our camera-related code has not been updated recently.However, we've observed that the error rate has significantly increased starting from May 2025. The error rate has risen from approximately 0.02% (2 in 10,000 users) to 0.1% (1 in 1,000 users). This represents a 5x increase in error occurrence. The frequency has increased noticeably since iOS 18.5 This is affecting our app's camera functionality and user experience Questions: Are there any known changes in iOS 18.5 regarding camera access management? What are the recommended best practices to handle this interruption reason? Are there any API changes we should be aware of? Best, Shay

I developed a driverkit extension based on overriding-the-default-usb-video-class-extension, but the link didn’t give the details of realization. I asked DTS who gave two tips: 1, Do you also have a CMIO extension to load in place of the default overriding-the-default-usb-video-class-extension 2, Your DriverKit extension’s info.plist is also missing the CameraAssistantBundleID. I want to know why a driverkit extension needs a CMIO extension, what’s the data and control flow?

I have a crash related to playing video in AVPlayerViewController and AVQueuePlayer. I download the video locally from the network and then initialize it using AVAsset and AVPlayerItem. Can't reproduce locally, but crashes occur from firebase crashlytics only for users starting with iOS 18.4.0 with this trace: Crashed: com.apple.avkit.playerControllerBackgroundQueue 0 libobjc.A.dylib 0x1458 objc_retain + 16 1 libobjc.A.dylib 0x1458 objc_retain_x0 + 16 2 AVKit 0x12afdc __77-[AVPlayerController currentEnabledAssetTrackForMediaType:completionHandler:]_block_invoke + 108 3 libdispatch.dylib 0x1aac _dispatch_call_block_and_release + 32 4 libdispatch.dylib 0x1b584 _dispatch_client_callout + 16 5 libdispatch.dylib 0x6560 _dispatch_continuation_pop + 596 6 libdispatch.dylib 0x5bd4 _dispatch_async_redirect_invoke + 580 7 libdispatch.dylib 0x13db0 _dispatch_root_queue_drain + 364 8 libdispatch.dylib 0x1454c _dispatch_worker_thread2 + 156 9 libsystem_pthread.dylib 0x4624 _pthread_wqthread + 232 10 libsystem_pthread.dylib 0x19f8 start_wqthread + 8

Hi everyone, I’m running into an issue with PHPickerFilter when using PHPickerViewController. When I configure the picker with a .videos and .livePhotos filter, it seems to work correctly in the Photos tab. However, when I switch to the Collections tab, the filter doesn’t always apply — users can still see and select static image assets in certain collections (e.g. from one of the People & Pets sections). Here’s a simplified snippet of my setup: var configuration = PHPickerConfiguration(photoLibrary: .shared()) configuration.selectionLimit = 1 var filters = [PHPickerFilter]() filters.append(.videos) filters.append(.livePhotos) configuration.filter = PHPickerFilter.any(of: filters) configuration.preferredAssetRepresentationMode = .current let picker = PHPickerViewController(configuration: configuration) picker.delegate = self present(picker, animated: true) Expected behavior: The picker should consistently respect the filter across both Photos and Collections tabs, only showing assets that match the filter. Actual behavior: The filter seems to apply correctly in the Photos tab, but in the Collections tab, other asset types are still visible/selectable. Has anyone else encountered this behavior? Is this expected or a known issue, or am I missing something in the configuration? Thanks in advance!