While validating a Dolby Vision Profile 5 playlist in CMAF format (with segments in MP4), the Media Stream Validator reported the following error in the MUXT-FIX-ISSUES list: However, the playlist correctly specifies Dolby Vision Profile 5 in both the EXT-X-STREAM-INF and EXT-X-I-STREAM-INF tags. Playlist: #EXTM3U #EXT-X-VERSION:8 #EXT-X-INDEPENDENT-SEGMENTS #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio-ec3",LANGUAGE="und",NAME="Undetermined",AUTOSELECT=YES,CHANNELS="6",URI="var14711339/aud1257/playlist.m3u8?device_profile=hls&seg_size=6&cmaf=1" #EXT-X-STREAM-INF:BANDWIDTH=14680000,AVERAGE-BANDWIDTH=14676380,VIDEO-RANGE=PQ,CODECS="ec-3,dvh1.05.06",RESOLUTION=3840x2160,AUDIO="audio-ec3" var14711339/vid/playlist.m3u8?device_profile=hls&seg_size=6&cmaf=1 #EXT-X-I-FRAME-STREAM-INF:BANDWIDTH=1419881,URI="trk14711339/playlist.m3u8?device_profile=hls&cmaf=1",VIDEO-RANGE=PQ,CODECS="dvh1.05.06",RESOLUTION=3840x2160 Could you please review this and clarify: Why is the Media Stream Validator reporting this error, even though the playlist correctly includes Dolby Vision Profile 5 parameters in CMAF format? Why is this error not reported when using a playlist with TS segments instead of CMAF (MP4)?

Hi all, with my app ScreenFloat, you can record your screen, along with system- and microphone audio. Those two audio feeds are recorded into separate audio tracks in order to individually remove or edit them later on. Now, these recordings you create with ScreenFloat can be drag-and-dropped to other apps instantly. So far, so good, but some apps, like Slack, or VLC, or even websites like YouTube, do not play back multiple audio tracks, just one. So what I'm trying to do is, on dragging the video recording file out of ScreenFloat, instantly baking together the two individual audio tracks into one, and offering that new file as the drag and drop file, so that all audio is played in the target app. But it's slow. I mean, it's actually quite fast, but for drag and drop, it's slow. My approach is this: "Bake together" the two audio tracks into a one-track m4a audio file using AVMutableAudioMix and AVAssetExportSession Take the video track, add the new audio file as an audio track to it, and render that out using AVAssetExportSession For a quick benchmark, a 3'40'' movie, step 1 takes ~1.7 seconds, and step two adds another ~1.5 seconds, so we're at ~3.2 seconds. That's an eternity for a drag and drop, where the user might cancel if there's no immediate feedback. I could also do it in one step, but then I couldn't use the AV*Passthrough preset, and that makes it take around 32 seconds then, because I assume it touches the video data (which is unnecessary in this case, so I think the two-step approach here is the fastest). So, my question is, is there a faster way? The best idea I can come up with right now is, when initially recording the screen with system- and microphone audio as separate tracks, to also record both of them into a third, muted, "hidden" track I could use later on, basically eliminating the need for step one and just ripping the two single audio tracks out of the movie and only have the video and the "hidden" track (then unmuted), but I'd still have a ~1.5 second delay there. Also, there's the processing and data overhead (basically doubling the movie's audio data). All this would be great for an export operation (where one expects it to take a little time), but for a drag-and-drop operation, it's not ideal. I've discarded the idea of doing a promise file drag, because many apps do not accept those, and I want to keep wide compatibility with all sorts of apps. I'd appreciate any ideas or pointers. Thank you kindly, Matthias

Hi everyone, I’m trying to use AVAssetResourceLoaderDelegate to handle a live radio stream (e.g. Icecast/HTTP stream). My goal is to have access to the last 30 seconds of audio data during playback, so I can analyze it for specific audio patterns in near-real-time. I’ve implemented a custom resource loader that works fine for podcasts and static files, where the file size and content length are known. However, for infinite live streams, my current implementation stops receiving new loading requests after the first one is served. As a result, the playback either stalls or fails to continue. Has anyone successfully used AVAssetResourceLoaderDelegate with a continuous radio stream? Or maybe you can suggest betterapproach for buffering and analyzing live audio? Any tips, examples, or advice would be appreciated. Thanks!

Hello, Has anyone else experienced variations in the accuracy of the playbackTime value? After a few seconds of playback, the reported time adjusts by a fraction of a second, making it difficult to calculate the actual playbackTime of the audio. This can be recreated by playing a song in MusicKit, recording the start time of the audio, playing for at least 10-20 seconds, and then comparing the playbackTime value to one calculated using the start time of the audio. In my experience this jump occurs after about 10 seconds of playback. Any help would be appreciated. Thanks!

I've got a setup using AVAudioEngine with several tone generator nodes, each with a chain of processing nodes, the chains then mixed into the main output. Generator ➡️ Effect ➡️... ➡️ .mainMixerNode ➡️ .outputNode). Generator ➡️ Effect ➡️... ⤴️ ... Generator ➡️ Effect ➡️... ⤴️ The user should be able to mute any chain individually. I've found several potential approaches to muting, but not terribly happy with any of them. Adjust the amplitudes directly in my tone generators. Issue: Consumes CPU even when completely muted. 4 generators adds ~15% cpu, even when all chains are muted. Detach/attach chains that are muted/unmuted. Issue: Causes loud clicking/popping sounds whenever muted/unmuted. Fade mixer output volume while detaching/attaching a chain (just cutting the volume immediately to 0 doesn't get rid of the clicking/popping). Issue: Causes all channels to fade during the transition, so not ideal. The rest of these ideas are variations on making volume control+detatch/attach work for individual chains, since approach #3 worked well. Add an AVAudioMixer to the end of each chain (just for volume control). Issue: Only the mixer on the final chain functions -- the others block all output. Not sure what's going on there. Use matrix mixer (for multi-input volume control). Plus detach/attach to reduce CPU if necessary. Not yet attempted, due to perceived complexity and reports of fragility in order of wiring in. A bunch of effort before I even know if it's going to work. Develop my own fader node to put on the end of each channel. Unlike the tone generator (simple AVSourceNode), developing an effect node seems complex and time consuming. Might not even fix CPU use. I'm not completely averse to the learning curve of either 5 or 6, but would rather get some guidance on best approach before diving in. They both seem likely to take more effort than I'd like for the simple behavior I'm trying to achieve.

We encounter issue with avplayer in case of EXT-X-DISCONTINUITY misalignment between audio and video produced after insertion of gaps. The initial objective is to introduce an EXT-X-DISCONTINUITY in audio playlist after some missing segments (EXT-X-GAP) which durations are aligned to video segments durations, to handle irregular audio durations. Please find below an example of corresponding video and audio playlists: video: #EXTM3U #EXT-X-VERSION:7 #EXT-X-MEDIA-SEQUENCE:872524632 #EXT-X-INDEPENDENT-SEGMENTS #EXT-X-TARGETDURATION:2 #USP-X-TIMESTAMP-MAP:MPEGTS=7096045027,LOCAL=2025-05-09T12:38:32.369100Z #EXT-X-MAP:URI="hls/StreamingBasic-video=979200.m4s" #EXT-X-PROGRAM-DATE-TIME:2025-05-09T12:38:32.369111Z #EXTINF:2.002, no desc hls/StreamingBasic-video=979200-872524632.m4s #EXTINF:2.002, no desc hls/StreamingBasic-video=979200-872524633.m4s #EXTINF:2.002, no desc hls/StreamingBasic-video=979200-872524634.m4s #EXTINF:2.002, no desc hls/StreamingBasic-video=979200-872524635.m4s #EXTINF:2.002, no desc hls/StreamingBasic-video=979200-872524636.m4s ## Media sequence discontinuity #EXT-X-GAP #EXTINF:2.002, no desc hls/StreamingBasic-video=979200-872524637.m4s ## Media sequence discontinuity #EXT-X-GAP #EXTINF:2.002, no desc hls/StreamingBasic-video=979200-872524638.m4s #EXT-X-PROGRAM-DATE-TIME:2025-05-09T12:38:46.383111Z #EXTINF:2.002, no desc hls/StreamingBasic-video=979200-872524639.m4s #EXTINF:2.002, no desc hls/StreamingBasic-video=979200-872524640.m4s audio: EXTM3U #EXT-X-VERSION:7 #EXT-X-MEDIA-SEQUENCE:872524632 #EXT-X-INDEPENDENT-SEGMENTS #EXT-X-TARGETDURATION:2 #USP-X-TIMESTAMP-MAP:MPEGTS=7096045867,LOCAL=2025-05-09T12:38:32.378400Z #EXT-X-MAP:URI="hls/StreamingBasic-audio_99500_eng=98800.m4s" #EXT-X-PROGRAM-DATE-TIME:2025-05-09T12:38:32.378444Z #EXTINF:2.0053, no desc hls/StreamingBasic-audio_99500_eng=98800-872524632.m4s #EXTINF:2.0053, no desc hls/StreamingBasic-audio_99500_eng=98800-872524633.m4s #EXTINF:2.0053, no desc hls/StreamingBasic-audio_99500_eng=98800-872524634.m4s #EXTINF:1.984, no desc hls/StreamingBasic-audio_99500_eng=98800-872524635.m4s #EXTINF:2.0053, no desc hls/StreamingBasic-audio_99500_eng=98800-872524636.m4s ## Media sequence discontinuity #EXT-X-GAP #EXTINF:2.002, no desc hls/StreamingBasic-audio_99500_eng=98800-872524637.m4s ## Media sequence discontinuity #EXT-X-GAP #EXTINF:2.002, no desc hls/StreamingBasic-audio_99500_eng=98800-872524638.m4s #EXT-X-DISCONTINUITY #EXT-X-PROGRAM-DATE-TIME:2025-05-09T12:38:46.778444Z #EXTINF:1.6213, no desc hls/StreamingBasic-audio_99500_eng=98800-872524639.m4s #EXTINF:2.0053, no desc hls/StreamingBasic-audio_99500_eng=98800-872524640.m4s In this case playback is broken with avplayer. Is it conformed to Http Live Streaming? Is it an avplayer bug? What are the guidelines to handle such gaps?

AVCaptureVideoDataOutput.preparesCellularRadioForNetworkConnection requires com.apple.developer.avfoundation.video-data-output-prepares-cellular-radio-for-machine-readable-code-scanning. But I cannot acquire its entitlement. I can't find its entitlement on 'Certificates, Identifiers & Profiles'. Any solutions? Provisioning profile "iOS Team Provisioning Profile: ......" doesn't include the com.apple.developer.avfoundation.video-data-output-prepares-cellular-radio-for-machine-readable-code-scanning entitlement.

Issue Description I'm implementing a system audio capture feature using AudioHardwareCreateProcessTap and AudioHardwareCreateAggregateDevice. The app successfully creates the tap and aggregate device, but when starting the IO procedure with AudioDeviceStart, it sometimes fails with OSStatus error 1852797029. (The operation couldn’t be completed. (OSStatus error 1852797029.)) The error occurs inconsistently, which makes it particularly difficult to debug and reproduce. Questions Has anyone encountered this intermittent "nope" error code (0x6e6f7065) when working with system audio capture? Are there specific conditions or system states that might trigger this error sporadically? Are there any known workarounds for handling this intermittent failure case? Any insights or guidance would be greatly appreciated. I'm wondering if anyone else has encountered this specific "nope" error code (0x6e6f7065) when working with system audio capture.

AVCaptureSession's startRunning method is thread blocking and seems to be slow. What is this method doing behind the scenes? For context: I'm working on Simulator Camera support and I have a 'fake' AVCaptureDevice that might be causing this. My hypothesis is that AVCaptureSession tries to connect to the device and waits for a notification to be posted back. I'd love to find a way to let my fake device message AVCaptureSession that it's connected.

I’m spot-checking some of the data I’m extracting from the Apple Music Feed parquet files and finding numerous issues of invalid album IDs. For example, just looking at any album with a primary artist id of 163043, I see a few albums that are not available at music.apple.com/us/album/NNN. These include: 981094158 - Time and the River 1803443737 - Celebration (Live New York ’80) 1525426873 - Anything You Want: The Warner-Reprise-Elektra Years I notice that neither of these album ids are returned using the general Music API, so I’m a bit confused why they would exist in the parquet files at all. Thanks.

I have integrated the ShazamKit SDK into my iOS app and would like to implement the same functionality in my Android app. My question is: Can I use the Android version of the ShazamKit SDK for commercial purposes? After extensive research, I could not find any official information regarding the license of the Android version of the ShazamKit SDK. Could you please provide a formal license statement?

AVPictureInPictureControllerContentSource *contentSource = [[AVPictureInPictureControllerContentSource alloc] initWithSampleBufferDisplayLayer:self.renderView.sampleBufferDisplayLayer playbackDelegate:self]; AVPictureInPictureController *pictureInPictureController = [[AVPictureInPictureController alloc] initWithContentSource:contentSource]; pictureInPictureController.delegate = self; (void)pictureInPictureController:(AVPictureInPictureController *)pictureInPictureController failedToStartPictureInPictureWithError:(NSError *)error { //error NSError * domain: @"PGPegasusErrorDomain" - code: -1003 0x00000002819fe3a0 } when first start the PiP play, I got the error "//error NSError * domain: @"PGPegasusErrorDomain" - code: -1003 0x00000002819fe3a0", why? and second start is Ok.

Hi everyone! Here's what I observed so far: On device it's reproducible on iOS/iPadOS18.5, but works on iPadOS17.7. On iPhone16 iOS 18.5 simulator that I was extensively using for development it was reproducible until I reset content and settings. On iPhone 16 iOS18.4 simulator, which was also used a lot during development it still works always, so I tend to think it's 18.5 issue. Setting config.websiteDataStore = .nonPersistent() doesn't help. Cleaning WKWebsiteDataStore doesn't help. It works fine using direct URL from the embedded code (see the code below). Can someone provide some insight on how this could be fixed? Here's the code: import SwiftUI import WebKit @main struct IGVideoApp: App { var body: some Scene { WindowGroup { WebView() } } } private struct WebView: UIViewRepresentable { func makeUIView(context: Context) -> WKWebView { let config = WKWebViewConfiguration() config.allowsInlineMediaPlayback = true return .init(frame: .zero, configuration: config) } func updateUIView(_ uiView: WKWebView, context: Context) { let urlString = "https://www.instagram.com/reel/DKHFOGct3z7/?utm_source=ig_embed&amp;utm_campaign=loading" /// It works when loading from the data-instgrm-permalink URL directly // uiView.load(.init(url: .init(string: "\(urlString)")!)) /// It doesn't work whith embedding /// Note: the code part for embedding (<blockquote>...</blockquote>) is taken from my /// Instagram post (https://www.instagram.com/p/DKHFOGct3z7/) /// and stripped down. The urlString was also extracted for demonstration of direct loading. let string = """ <!doctype html> <meta charset="utf-8" /> <meta name="viewport" content="width=device-width, initial-scale=1"> <html> <head /> <body style="background-color:black; margin:0px"> <blockquote class="instagram-media" data-instgrm-captioned data-instgrm-version="14" data-instgrm-permalink="\(urlString)"> </blockquote> <script async src="https://www.instagram.com/embed.js"></script> </body> </html> """ uiView.loadHTMLString(string, baseURL: .init(string: "https://www.instagram.com")) } }

Hi, I'm trying to plan out development of an app and am wondering if it is possible to have user generated content automatically populate into a custom shazamkit catalogue and be able to query this catalogue non-locally? Storing all the submissions locally would obviously not scale.

Hi, I’ve developed a photo app that includes a photo deletion feature. Some users have reported encountering PHPhotosError.operationInterrupted (3301) when attempting to delete photos. Initially, I suspected that some of the assets might have a sourceType of typeiTunesSynced, since the documentation notes that iTunes-synced assets cannot be edited or deleted. However, after checking the logs, all of the assets involved are of typeUserLibrary. Additionally, the user mentioned that some photos in the iPhone Photos do not show a delete button. I’m unsure whether the absence of the delete button is related to the 3301 error. I’d like to confirm the following: Under what conditions does PHPhotosError.operationInterrupted (3301) occur, and how should it be handled? Why do some photos in the iPhone Photos not show a delete button? The code for deleting photos is as follows: PHPhotoLibrary *library = [PHPhotoLibrary sharedPhotoLibrary]; [library performChanges:^{ PHFetchResult *assetsToBeDeleted = [PHAsset fetchAssetsWithLocalIdentifiers:delUrls options:nil]; if (assetsToBeDeleted) { [PHAssetChangeRequest deleteAssets:assetsToBeDeleted]; } } completionHandler:^(BOOL success, NSError *error) {

Dear Apple Developer Community, I'm encountering a critical issue with the MusicLibrary.shared.createPlaylist() method in MusicKit that's affecting our app's core functionality. Despite implementing all recommended authorization checks, the app consistently freezes for some users when this method is called. What we've already verified before calling createPlaylist(): Network connectivity is properly checked and confirmed Apple Music authorization is explicitly requested via MusicAuthorization.request() User subscription status is verified using MusicSubscription.current.canPlayCatalogContent Despite these precautions, many users report that their app completely freezes when attempting to create a playlist. This is particularly concerning as playlist creation is a core feature of our application. User-reported workarounds (with mixed success): Some users have resolved the issue by restarting their devices or reinstalling our app Others report success after enabling "Sync Library" in Settings → Music Unfortunately, a significant number of users are still experiencing the issue even after trying both solutions above We've reviewed the MusicKit documentation thoroughly and ensured our implementation follows all best practices. Our app correctly handles permissions and uses the async/await pattern as required by the API. Is there a known issue with the createPlaylist() method that might cause it to block indefinitely? Are there additional authorization steps or settings we should be checking before calling this method? Could this be related to how MusicKit communicates with Apple Music servers? Any insights from the developer community or official guidance would be greatly appreciated as this issue is severely impacting our user experience. Thank you for your assistance

Use case: When SharePlay -ing a fully immersive 3D scene (e.g. a virtual stage), I would like to shine lights on specific Personas, so they show up brighter when someone in the scene is recording the feed (think a camera person in the scene wearing Vision Pro). Note: This spotlight effect only needs to render in the camera person's headset and does NOT need to be journaled or shared. Before I dive into this, my technical question: Can environmental and/or scene lighting affect Persona brightness in a SharePlay? If not, is there a way to programmatically make Personas "brighter" when recording? My screen recordings always seem to turn out darker than what's rendered in environment, and manually adjusting the contrast tends to blow out the details in a Persona's face (especially in visionOS 26).

I did watch WWDC 2019 Session 716 and understand that an active audio session is key to unlocking low‑level networking on watchOS. I’m configuring my audio session and engine as follows: private func configureAudioSession(completion: @escaping (Bool) -> Void) { let audioSession = AVAudioSession.sharedInstance() do { try audioSession.setCategory(.playAndRecord, mode: .voiceChat, options: []) try audioSession.setActive(true, options: .notifyOthersOnDeactivation) // Retrieve sample rate and configure the audio format. let sampleRate = audioSession.sampleRate print("Active hardware sample rate: \(sampleRate)") audioFormat = AVAudioFormat(standardFormatWithSampleRate: sampleRate, channels: 1) // Configure the audio engine. audioInputNode = audioEngine.inputNode audioEngine.attach(audioPlayerNode) audioEngine.connect(audioPlayerNode, to: audioEngine.mainMixerNode, format: audioFormat) try audioEngine.start() completion(true) } catch { print("Error configuring audio session: \(error.localizedDescription)") completion(false) } } private func setupUDPConnection() { let parameters = NWParameters.udp parameters.includePeerToPeer = true connection = NWConnection(host: "***.***.xxxxx.***", port: 0000, using: parameters) setupNWConnectionHandlers() } private func setupTCPConnection() { let parameters = NWParameters.tcp connection = NWConnection(host: "***.***.xxxxx.***", port: 0000, using: parameters) setupNWConnectionHandlers() } private func setupWebSocketConnection() { guard let url = URL(string: "ws://***.***.xxxxx.***:0000") else { print("Invalid WebSocket URL") return } let session = URLSession(configuration: .default) webSocketTask = session.webSocketTask(with: url) webSocketTask?.resume() print("WebSocket connection initiated") sendAudioToServer() receiveDataFromServer() sendWebSocketPing(after: 0.6) } private func setupNWConnectionHandlers() { connection?.stateUpdateHandler = { [weak self] state in DispatchQueue.main.async { switch state { case .ready: print("Connected (NWConnection)") self?.isConnected = true self?.failToConnect = false self?.receiveDataFromServer() self?.sendAudioToServer() case .waiting(let error), .failed(let error): print("Connection error: \(error.localizedDescription)") DispatchQueue.main.asyncAfter(deadline: .now() + 2) { self?.setupNetwork() } case .cancelled: print("NWConnection cancelled") self?.isConnected = false default: break } } } connection?.start(queue: .main) } Duplex in this context refers to two-way audio transmission simultaneously recording and sending audio while also receiving and playing back incoming audio, similar to a VoIP/SIP call. The setup works fine on the simulator, which suggests that the core logic is correct. However, since the simulator doesn’t fully replicate WatchOS hardware behavior especially for audio sessions and networking issues might arise when running on a real device. The problem likely lies in either the Watch’s actual hardware limitations, permission constraints, or specific audio session configurations. I am reaching out to seek further assistance regarding the challenges I've been experiencing with establishing a UDP, TCP & web socket connection on watchOS using NWConnection for duplex audio streaming. Despite implementing the recommendations provided earlier, I am still encountering difficulties From what I can see, your implementation is focused on streaming audio playback with the server. In my case, I'm looking for a slightly different approach: I want to capture audio and send buffers of a specific size to the server while playing audio simultaneously, essentially achieving full duplex streaming similar to a VOIP call. Additionally, I’d like to ensure that if no external audio route is connected, the Apple Watch speaker is used by default. Any thoughts or insights on adapting this setup for those requirements would be very welcome.

TL;DR How to solve possible racing issue of EXT-X-SESSION-KEY request and encrypted media segment request? I'm having trouble using custom AVAssetResourceLoaderDelegate with video manifest containing VideoProtectionKey(VPK). My master manifest contains rendition manifest url and VPK url. When not using custom resource delegate, everything works fine. My custom resource delegate is implemented in way where it first append prefix to scheme of the master manifest url before creating the asset. And during handling master manifest, it puts back original scheme, make the request, modify the scheme for rendition manifest url in the response content by appending the same prefix again, so that rendition manifest request also goes into custom resource loader delegate. Same goes for VPK request. The AES-128 key is stored in memory within custom resource loader delegate object. So far so good. The VPK is requested before segment request. But the problem comes where the media segment requests happen. The media segment request url from rendition manifest goes into custom resource loader as well and those are encrypted. I can see segment request finish first then the related VPK requests kick in after a few seconds. The previous VPK value is cached in memory so it is not network causing the delay but some mechanism that I'm not aware of causing this. So could anyone tell me what would be the proper way of handling this situation? The native library is handling it well so I just want to know how. Thanks in advance!

How can media resources in my app be recommended to the system media control center, just like TikTok in the picture