Hello, I want to know if there are any restrictions with MusicKit to be used in a mobile app to be able to manipulate audio with an EQ on tracks coming from Apple Music, without modifying the actual track structure/data of course, just the audio output.

I'm using AVFoundation to make a multi-track editor app, which can insert multiple track and clip, including scale some clip to change the speed of the clip, (also I'm not sure whether AVFoundation the best choice for me) but after making the scale with scaleTimeRange API, there is some short noise sound in play back. Also, sometimes it's fine when play AVMutableCompostion using AVPlayer with AVPlayerItem, but after exporting with AVAssetReader, will catch some short noise sounds in result file.... Not sure why. Here is the example project, which can build and run directly. https://github.com/luckysmg/daily_images/raw/refs/heads/main/TestDemo.zip

Hello, I'm trying to determine the best/recommended AVAudioSession configuration (i.e category, mode, and options) for the following use-case. Essentially, I'd like to switch between periods of playing an audio file and then recognizing speech. The audio file is typically speech and I don't intend for playback and speech recognition to occur simultaneously. I'd like for the user to sill be able to interact with Siri and I'd like for it to work with CarPlay where navigation prompts can occur. I would assume the category to use is 'playAndRecord', but I'm not sure if it's better to just set that once for the entire lifecycle, or set to 'playback' for audio file playback and then switch to 'playAndRecord' for speech recognition . I'm also not sure on the best 'mode' and 'options' to set. Any suggestions would be appreciated. Thanks.

When i use AVPlayer to obtain the video frame CVPixelBufferRef of an HDR video, and use AVSampleBufferDisplayLayer to display it on the screen, after a period of time, the HDR video content and screen gradually darken, losing the HDR effect. Steps to reproduce: Create an AVPlayer to loop an HDR video, specify the video frame format as kCVPixelFormatType_420YpCbCr10BiPlanarVideoRange Create a timer to get the video frame CVPixelBufferRef at 30 frames per second Use AVSampleBufferDisplayLayer to display CVPixelBufferRef on the screen Don't operate the phone, wait for a period of time (such as 40 minutes), the HDR effect disappears and the screen darkens Note: You need to use an iPhone device, iOS 18.5 and below operating system You need to ensure that the HDR video is played in a loop, that is, to ensure that the screen continues to display HDR content, wait for a period of time, depending on different devices, you need to wait for 20-40 minutes. In the iPhone Photos app,the same problem will occur after playing HDR video in a loop for a long time Expected Results: When rendering HDR content for a long time, it is guaranteed that there is always an HDR effect, and the HDR content and screen will not be darkened. Current Results: After about 20-40 minutes, the HDR effect disappears and the screen darkens.

Hi there, I recently launched a dj app to the mac app store, and was wondering how I could access raw data to songs from apple music just like how serato, rekordbox, djay, etc. do? Thanks, Gunek

Hi, I try to record audio on the iPhone with the AVAudioRecorder and Xcode 26.0.1. Maybe the problem is that I can not record audio with the simulator. But there's a menu for audio. In the plist I added 'Privacy - Microphone Usage Description' and I ask for permission before recording. if await AVAudioApplication.requestRecordPermission() { print("permission granted") recordPermission = true } else { print("permission denied") } Permission is granted. let settings: [String : Any] = [ AVFormatIDKey: kAudioFormatMPEG4AAC, AVSampleRateKey: 12000, AVNumberOfChannelsKey: 1, AVEncoderAudioQualityKey: AVAudioQuality.high.rawValue ] recorder = try AVAudioRecorder(url: filename, settings: settings) let prepared = recorder.prepareToRecord() print("prepared started: \(prepared)") let started = recorder.record() print("recording started: \(started)") started is always false and I tried many settings. Error messages AddInstanceForFactory: No factory registered for id <CFUUID 0x600000211480> F8BB1C28-BAE8-11D6-9C31-00039315CD46 AudioConverter.cpp:1052 Failed to create a new in process converter -> from 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame, with status -50 AudioQueueObject.cpp:1892 BuildConverter: AudioConverterNew returned -50 from: 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to: 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame prepared started: true AudioQueueObject.cpp:7581 ConvertInput: aq@0x10381be00: AudioConverterFillComplexBuffer returned -50, packetCount 5 recording started: false All examples I find are the same, but apparently there must be something different.

When I try to send a DRM-protected video via Airplay to an Apple TV, the license request is made twice instead of once as it normally does on iOS. We only allow one request per session for security reasons, this causes the second request to fail and the video won't play. We've tested DRM-protected videos without token usage limits and it works, but this creates a security hole in our system. Why does it request the license twice in function: func contentKeySession(_ session: AVContentKeySession, didProvide keyRequest: AVContentKeyRequest)? Is there a way to prevent this?

According to the doc, I did a simple demo to verify. My env: ProductName: macOS ProductVersion: 15.5 BuildVersion: 24F74 2.4 GHz 四核Intel Core i5 Info.plist: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>IOKitPersonalities</key> <dict> <key>UVCamera</key> <dict> <key>CFBundleIdentifierKernel</key> <string>com.apple.kpi.iokit</string> <key>IOClass</key> <string>IOUserService</string> <key>IOMatchCategory</key> <string>$(PRODUCT_BUNDLE_IDENTIFIER)</string> <key>IOProviderClass</key> <string>IOUserResources</string> <key>IOResourceMatch</key> <string>IOKit</string> <key>IOUserClass</key> <string>UVCamera</string> <key>IOUserServerName</key> <string>$(PRODUCT_BUNDLE_IDENTIFIER)</string> <key>IOProbeScore</key> <integer>100000</integer> <key>idVendor</key> <integer>1452</integer> <key>idProduct</key> <integer>34068</integer> </dict> </dict> <key>OSBundleUsageDescription</key> <string></string> </dict> </plist> UVCamera.cpp // // UVCamera.cpp // UVCamera // // Created by DTEN on 2025/6/12. // #include <os/log.h> #include <DriverKit/IOUserServer.h> #include <DriverKit/IOLib.h> #include "UVCamera.h" kern_return_t IMPL(UVCamera, Start) { kern_return_t ret; ret = Start(provider, SUPERDISPATCH); os_log(OS_LOG_DEFAULT, "Hello World"); return ret; } UVCamera.iig // // UVCamera.iig // UVCamera // // Created by DTEN on 2025/6/12. // #ifndef UVCamera_h #define UVCamera_h #include <Availability.h> #include <DriverKit/IOService.iig> class UVCamera: public IOService { public: virtual kern_return_t Start(IOService * provider) override; }; #endif /* UVCamera_h */ Then I build by xcode and mv it to /Library/DriverExtensions: sudo mv com.lqs.MyVirtualCam.UVCamera.dext /Library/DriverExtensions sudo kmutil install -R / -r /Library/DriverExtensions kmutil rebuild done However，the dext can't be loaded: kmutil showloaded --list-only | grep UVCamera No variant specified, falling back to release What's the problem? anyone can help me?

After update,WeChat voice chatting no sounds, please help

Hi, I'm working an a video editing software that lets you composite and export videos. I use a custom compositor to apply my effects etc. In my crash dashboard, I am seeing a report of an EXC_BAD_ACCESS crash from objc_msgSend. Below is the stacktrace. libobjc.A.dylib objc_msgSend libdispatch.dylib _dispatch_sync_invoke_and_complete_recurse libdispatch.dylib _dispatch_sync_f_slow [symbolication failed] libdispatch.dylib _dispatch_client_callout libdispatch.dylib _dispatch_lane_barrier_sync_invoke_and_complete AVFCore -[AVCustomVideoCompositorSession(AVCustomVideoCompositorSession_FigCallbackHandling) _customCompositorShouldCancelPendingFrames] AVFCore _customCompositorShouldCancelPendingFramesCallback MediaToolbox remoteVideoCompositor_HandleVideoCompositorClientMessage CoreMedia __figXPCConnection_CallClientMessageHandlers_block_invoke libdispatch.dylib _dispatch_call_block_and_release libdispatch.dylib _dispatch_client_callout libdispatch.dylib _dispatch_lane_serial_drain libdispatch.dylib _dispatch_lane_invoke libdispatch.dylib _dispatch_root_queue_drain_deferred_wlh libdispatch.dylib _dispatch_workloop_worker_thread libsystem_pthread.dylib _pthread_wqthread libsystem_pthread.dylib start_wqthread What stood out to me is that this is only being reported from IOS 26.0+ devices. A part of the stacktrace failed to be symbolicated [symbolication failed]. I'm 90% confident that this is Apple code, not my app's code. I cannot reproduce this locally. Is this a known issue? What are the possible root-causes, and how can I verify/eliminate them? Thanks,

Among the millions of users of our online product, we have identified through data metrics that the silent audio data capture rate on iPadOS 18.4.1 or 18.5 has increased abnormally. However, we are unable to reproduce the issue. Has anyone encountered a similar issue? The parameters we used are as follows: AudioSession: category:AVAudioSessionCategoryPlayAndRecord mode:AVAudioSessionModeDefault option:77 preferredSampleRate:48000.000000 preferredIOBufferDuration:0.010000 AudioUnit format.mFormatID = kAudioFormatLinearPCM; format.mSampleRate = 48000.0; format.mChannelsPerFrame = 2; format.mBitsPerChannel = 16; format.mFramesPerPacket = 1; format.mBytesPerFrame = format.mChannelsPerFrame * 16 / 8; format.mBytesPerPacket = format.mBytesPerFrame * format.mFramesPerPacket; format.mFormatFlags = kAudioFormatFlagsNativeEndian | kLinearPCMFormatFlagIsPacked | kLinearPCMFormatFlagIsSignedInteger; component.componentType = kAudioUnitType_Output; component.componentSubType = kAudioUnitSubType_RemoteIO; component.componentManufacturer = kAudioUnitManufacturer_Apple; component.componentFlags = 0; component.componentFlagsMask = 0;

We are seeing logs were on iOS devices we see some keyframes request. but on safari browser don’t see any request like this. could you please explain what is it. /d8ceb9244ff889b42b82eb807327531-c27dbcb10e0bbf3cde6c-1/d8ceb9244ff88e9b42b82eb807327531-c27dbcb10e0bbf3cde6c-1/keyframes/hls/.

I have both apple devices, AirPods Pro 3 is up to date and Ultra 3 is on watch os 26.1 latest public beta. Each morning when I would go on my mindfulness app and start a meditation or listen to Apple Music on my watch and AirPods Pro 3, it will play for a few seconds then disconnects. My bluetooth settings on my watch says my AirPods is connected to my watch. I also have removed the tick about connecting automatically to iPhone on the AirPods setting in my iPhone. To fix this I invariably turn off my Apple Watch Ultra 3 and turn it on again. Then the connection becomes stable. I am not sure why I have to do this each morning. It is frustrating. I am not sure why this fix does not last long? Is there something wrong with my AirPods? Has anyone encountered this before?

When multiple identical songs are added to a playlist, Playlist.Entry.id uses a suffix-based identifier (e.g. songID_0, songID_1, etc.). Removing one entry causes others to shift, changing their .id values. This leads to diffing errors and collection view crashes in SwiftUI or UIKit when entries are updated. Steps to Reproduce: Add the same song to a playlist multiple times. Observe .id.rawValue of entries (e.g. i.SONGID_0, i.SONGID_1). Remove one entry. Fetch playlist again — note the other IDs have shifted. FB18879062

Hi all, I've developed an audio DSP application in C++ using AudioToolbox and CoreAudio on MacOS 14.4.1 with Xcode 15. I use an AudioQueue for input and another for output. This works great. I'm now adding real-time audio analysis eg spectral analysis. I want this to run independently of my audio processing so it can not interfere with audio playback. Taps on AudioQueues seem to be a good way of doing this... Since the analytics won't modify the audio data, I am using a Siphon Tap by setting the AudioQueueProcessingTapFlags to kAudioQueueProcessingTap_PreEffects | kAudioQueueProcessingTap_Siphon; This works fine on my output queue. However, on my input queue the Tap callback is called once and then a EXC_BAD_ACCESS occurs - screen shot below. NB: I believe that a callback should only call AudioQueueProcessingTapGetSourceAudio when not using a Siphon, so I don't call it. Relevant code: AudioQueueProcessingTapCallback tap_callback) { // Makes an audio tap for a queue void * tap_data_ptr = NULL; AudioQueueProcessingTapFlags tap_flags = kAudioQueueProcessingTap_PostEffects | kAudioQueueProcessingTap_Siphon; uint32_t max_frames = 0; AudioStreamBasicDescription asbd; AudioQueueProcessingTapRef tap_ref; OSStatus status = AudioQueueProcessingTapNew(queue_ref, tap_callback, tap_data_ptr, tap_flags, &max_frames, &asbd, &tap_ref); if (status != noErr) printf("Error while making Tap\n"); else printf("Successfully made tap\n"); } void tapper(void * tap_data, AudioQueueProcessingTapRef tap_ref, uint32_t number_of_frames_in, AudioTimeStamp * ts_ptr, AudioQueueProcessingTapFlags * tap_flags_ptr, uint32_t * number_of_frames_out_ptr, AudioBufferList * buf_list) { // Callback function for audio queue tap printf("Tap callback"); }``` Image of exception stack provided by Xcode: ![]("https://developer.apple.com/forums/content/attachment/27479e8d-a118-459b-aa2d-7e30528910e3" "title=Screenshot 2025-06-14 at 1.29.14 PM.png;width=932;height=562") What have I missed? Appreciate any help you learned folks may be able to provide. Best, Geoff.

Hi Apple Music API / MusicKit / MediaPlayer Team, Similar to the currentPlaybackRate keeps the same pitch, it would be great to have a currentPlaybackPitch parameter as well. Alternatively, adding a preservesPitch parameter would also work. I see that iOS 26 AutoMix on Apple Music currently does pitch shifting during music transitions, so maybe this is something that could be exposed on the later betas of iOS 26? Main feature request we get is to have simple pitch changes to Apple Music we play through our app. Is this being considered?

Hi everyone, I’m testing audio recording on an iPhone 15 Plus using AVFoundation. Here’s a simplified version of my setup: let settings: [String: Any] = [ AVFormatIDKey: Int(kAudioFormatLinearPCM), AVSampleRateKey: 8000, AVNumberOfChannelsKey: 1, AVLinearPCMBitDepthKey: 16, AVLinearPCMIsFloatKey: false ] audioRecorder = try AVAudioRecorder(url: fileURL, settings: settings) audioRecorder?.record() When I check the recorded file’s sample rate, it logs: Actual sample rate: 8000.0 However, when I inspect the hardware sample rate: try session.setCategory(.playAndRecord, mode: .default) try session.setActive(true) print("Hardware sample rate:", session.sampleRate) I consistently get: `Hardware sample rate: 48000.0 My questions are: Is the iPhone mic actually capturing at 8 kHz, or is it recording at 48 kHz and then downsampling to 8 kHz internally? Is there any way to force the hardware to record natively at 8 kHz? If not, what’s the recommended approach for telephony-quality audio (true 8 kHz) on iOS devices? Thanks in advance for your guidance!

The documentation for the Apple Music API indicates that the genreNames field for a given artist (see https://developer.apple.com/documentation/applemusicapi/artists/attributes-data.dictionary) is an array of strings. However, it only appears as though you return ONE SINGLE GENRE per Artist, regardless of how many genres might be attached to that artist's albums. Am I missing something? Is there an artist where multiple genres may be returned, or is this a bug in the documentation?

Using an iPhone Pro 12 running iOS 26.0.1, with AirPods Pro 3. Camera app does capture video with what seems to be "Studio Quality Recording". Am trying to replicate that SQR with my own Camera like app, and while I can pull audio in from the APP3 mic, and my video capture app is recording a 48,000Hz high-bitrate video, the audio still sounds non-SQR. I'm seeing bluetoothA2DP , bluetoothLE , bluetoothHFP as portType, and not sure if SQR depends on one of those? Is there sample code demonstrating a SQR capture? Nevermind video and camera, just audio even? Also, I don't understand what SQR is doing between the APP3 and the iPhone. What codec is that? What bitrate is that? If I capture video using Capture and inspect the audio stream I see mono 74.14 kbit/s MPEG-4 AAC, 48000 Hz. But I assume that's been recompressed and not really giving me any insight into the APP3 H2 transmission?

Add RPSystemBroadcastPickerView to the app, After clicking, no method of SampleHandler is triggered