I ran 5.1 audio tests in both YouTube and Apple Music, and I noticed that when sound is supposed to play from the rear or front surround speakers, it’s also duplicated in the front left and right channels. I’m absolutely sure the issue is with the Apple TV, because I played the same video directly through my TV’s native system, and the channel separation was correct. Everything used to work perfectly before, so this must be a software issue. I’m currently on tvOS 26 Developer Beta 5, but I’m certain the problem also existed on the stable tvOS 18.5. I’ve already reset and updated my Apple TV, and I also tried switching the audio format to forced Dolby Atmos 5.1. On the forums, I mostly see complaints about Dolby Atmos not working at all — in my case, everything technically works, but not the way it’s supposed to.

Hi team, With regards to Call (Live) Translations on VOIP: Is it possible to invoke live translations within the app? (without going into the Call System UI) Is it possible to navigate users from app to Call System UI via an API? (and also invoking the new live translations directly) Will Apple support more languages apart from the current ones? (Currently I see 4 supported languages)

I have a SwiftUI app - (https://youtu.be/VbAfUk_eYl0?si=JxUBh0Bpb-vc1E1U) - which I thought was almost ready for release - a manager for airdropped audio files from Logic Pro or other music creation applications. It uses AVAudioEngine and AVAudioPlayerNode to play audio, and the MediaPlayer API to integrate with car audio and similar, all of which works well. It does not currently have an explicit CarPlay integration (and I'm slightly horrified at the amount of work that is going to require). I had the good or bad luck of getting a loaner car with carplay while mine is being repaired yesterday, and lo and behold, when connected to the vehicle via CarPlay, there is no audio output in the vehicle at all. The now playing panel correctly shows the information my app provides about the currently playing song; the player node believes it is playing, the AVAudioSession is configured as it should be. But there is no sound. Obviously I cannot ship it in this state. I've tried fiddling with the parameters the AVAudioSession is configured with, in case there was some parameter that was preventing audio output, to no avail - currently: var options = AVAudioSession.CategoryOptions() options.insert(.allowAirPlay) options.insert(.allowBluetooth) options.insert(.allowBluetoothA2DP) try session.setCategory(.playback, mode: .default, options: options) try? session.setPreferredIOBufferDuration(0.002) // ~96 samples at 44.1kHz try? session.setPrefersNoInterruptionsFromSystemAlerts(true) try? session.setPrefersInterruptionOnRouteDisconnect(false) try session.setActive(true, options: [.notifyOthersOnDeactivation]) All diagnostics within the app show the player operating correctly - files are played and flushed; AVAudioPlayerNodeCompletionCallbacks are called when they should be. But the output is not audible in the vehicle. I would much prefer to ship this app without full-blown CarPlay integration, but with working audio when connected via CarPlay, and work on full CarPlay integration for the next release. Is there some secret handshake I am just missing to make this work?

Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback, using ApplicationMusicPlayer. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

Using the official SwiftTranscriptionSampleApp from WWDC 2025, speech transcription takes 14+ seconds from audio input to first result, making it unusable for real-time applications. Environment iOS: 26.0 Beta Xcode: Beta 5 Device: iPhone 16 pro Sample App: Official Apple SwiftTranscriptionSampleApp from WWDC 2025 Configuration Tested Locale: en-US (properly allocated with AssetInventory.allocate(locale:)) and es-ES Setup: All optimizations applied (preheating, high priority, model retention) I started testing in my own app to replace SFSpeech API and include speech detection but after long fights with documentation (this part is quite terrible TBH) I tested the example (https://developer.apple.com/documentation/speech/bringing-advanced-speech-to-text-capabilities-to-your-app) and saw same results. I added some logs to check the specific time: 🎙️ [20:30:41.532] ✅ Analyzer started successfully - ready to receive audio! 🎙️ [20:30:41.532] Listening for transcription results... 🎙️ [20:30:56.342] 🚀 FIRST TRANSCRIPTION RESULT after 14.810s: 'Hello' (isFinal: false) Questions Is this expected performance for iOS 26 Beta, because old SFSpeech is far faster? Are there additional optimization steps for SpeechTranscriber? Should we expect significant performance improvements in later betas?

After updating to iOS 18.5, we’ve observed that outgoing audio from our app intermittently stops being transmitted during VoIP calls using AVAudioSession configured with .playAndRecord and .voiceChat. The session is set active without errors, and interruptions are handled correctly, yet audio capture suddenly ceases mid-call. This was not observed in earlier iOS versions (≤ 18.4). We’d like to confirm if there have been any recent changes in AVAudioSession, CallKit, or related media handling that could affect audio input behavior during long-running calls. func configureForVoIPCall() throws { try setCategory( .playAndRecord, mode: .voiceChat, options: [.allowBluetooth, .allowBluetoothA2DP, .defaultToSpeaker]) try setActive(true) }

I was testing audio playback from YouTube in Safari, and the sound was clipping heavily. At first, I thought it might be due to the poor quality of my small sound system. However, when I took a screenshot and the screenshot sound effect itself produced a loud clipping noise, it became clear that this is not a mechanical problem with my speakers, nor an issue specific to YouTube or Safari. This appears to be a system-wide audio issue in macOS Tahoe 26 - Beta 5.

Two issues: No matter what I set in try audioSession.setPreferredSampleRate(x) the sample rate on both iOS and macOS is always 48000 when the output goes through the speaker, and 24000 when my Airpods connect to an iPhone/iPad. Now, I'm checking the current output loudness to animate a 3D character, using mixerNode.installTap(onBus: 0, bufferSize: y, format: nil) { [weak self] buffer, time in Task { @MainActor in // calculate rms and animate character accordingly but any buffer size under 4800 is just ignored and the buffers I get are 4800 sized. This is ok, when the sampleRate is currently 48000, as 10 samples per second lead to decent visual results. But when AirPods connect, the samplerate is 24000, which means only 5 samples per second, so the character animation looks lame. My AVAudioEngine setup is the following: audioEngine.connect(playerNode, to: pitchShiftEffect, format: format) audioEngine.connect(pitchShiftEffect, to: mixerNode, format: format) audioEngine.connect(mixerNode, to: audioEngine.outputNode, format: nil) Now, I'd be fine if the outputNode runs at whatever if it needs, as long as my tap would get at least 10 samples per second. PS: Specifying my favorite format in the let format = AVAudioFormat(standardFormatWithSampleRate: 48_000, channels: 2)! mixerNode.installTap(onBus: 0, bufferSize: y, format: format) doesn't change anything either

I'm experiencing a significant limitation with MusicKit's Dolby Atmos implementation on macOS and would appreciate clarification on whether this is intended behavior or if there are solutions available. When streaming Dolby Atmos content through MusicKit's ApplicationMusicPlayer, the output is limited to 2-channel stereo, even when: Audio MIDI Setup is configured for 7.1.4 (12-channel) output The same tracks play in full multichannel through the native Apple Music app Dolby Atmos is set to "Automatic" in Apple Music preferences Please let me know if there is anyway to enable this. If not, is this documented anywhere? Thanks!

Hello, I’m new here. I'm developing an iOS app and I’d like to know whether it is possible to detect if a phone call is being recorded by another app running in the background. I’ve already reviewed the documentation for CallKit and AVAudioSession, but I couldn’t find anything related. My expectation was that iOS might provide some callback or API to indicate if a call is being recorded (third-party apps), but so far I haven’t found a way. My questions are: Does iOS expose any API to detect if a call is being recorded? If not, is there any indirect, Apple's policy compliant method (e.g., microphone usage events) that can be relied upon? Or is this something that iOS explicitly prevents for privacyreasons? Expecting solutions that align with Apple’s policies and would be accepted under the App Store Review Guidelines. Thanks in advance for any guidance.

Hello, Has anyone else experienced variations in the accuracy of the playbackTime value? After a few seconds of playback, the reported time adjusts by a fraction of a second, making it difficult to calculate the actual playbackTime of the audio. This can be recreated by playing a song in MusicKit, recording the start time of the audio, playing for at least 10-20 seconds, and then comparing the playbackTime value to one calculated using the start time of the audio. In my experience this jump occurs after about 10 seconds of playback. Any help would be appreciated. Thanks!

We are developing an apple music app on phone, the developed web works fine on chrome, but when i load it on webivew on my phone, i can't play the first song, We doubt that the drm init, key exchange, session creation was on the music.play() function, while we trigger the play, the drm or session was not ok for play a real song, so it got an error so we may wanna know: what about the realative process of drm, key, session, etc in the play() function? are there some state detect function to show weather the drm is ok？

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

There appears to be no method of going forward or backwards in Get Info in the Music application,

3 I am working on an application to get when input audio device is being used. Basically I want to know the application using the microphone (built-in or external) This app runs on macOS. For Mac versions starting from Sonoma I can use this code: int getAudioProcessPID(AudioObjectID process) { pid_t pid; if (@available(macOS 14.0, *)) { constexpr AudioObjectPropertyAddress prop { kAudioProcessPropertyPID, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain }; UInt32 dataSize = sizeof(pid); OSStatus error = AudioObjectGetPropertyData(process, &prop, 0, nullptr, &dataSize, &pid); if (error != noErr) { return -1; } } else { // Pre sonoma code goes here } return pid; } which works. However, kAudioProcessPropertyPID was added in macOS SDK 14.0. Does anyone know how to achieve the same functionality on previous versions?

My app want Converting iphone12 HDR Video to SDR，to edit。 follow the doc Apple-HDR-Convert. My code setting the pixBuffAttributes        [pixBuffAttributes setObject:(id)(kCVImageBufferYCbCrMatrix_ITU_R_709_2) forKey:(id)kCVImageBufferYCbCrMatrixKey];       [pixBuffAttributes setObject:(id)(kCVImageBufferColorPrimaries_ITU_R_709_2) forKey:(id)kCVImageBufferColorPrimariesKey];       [pixBuffAttributes setObject:(id)kCVImageBufferTransferFunction_ITU_R_709_2 forKey:(id)kCVImageBufferTransferFunctionKey];       playerItemOutput = [[AVPlayerItemVideoOutput alloc] initWithPixelBufferAttributes:pixBuffAttributes]; but I get the playerItemOutput's output buffer   CFTypeRef colorAttachments = CVBufferGetAttachment(pixelBuffer, kCVImageBufferYCbCrMatrixKey, NULL);     CFTypeRef colorPrimaries = CVBufferGetAttachment(pixelBuffer, kCVImageBufferColorPrimariesKey, NULL);     CFTypeRef colorTransFunc = CVBufferGetAttachment(pixelBuffer, kCVImageBufferTransferFunctionKey, NULL);      NSLog(@"colorAttachments = %@", colorAttachments);     NSLog(@"colorPrimaries = %@", colorPrimaries);     NSLog(@"colorTransFunc = %@", colorTransFunc); log output: colorAttachments = ITU_R_2020 colorPrimaries = ITU_R_2020 colorTransFunc = ITU_R_2100_HLG pixBuffAttributes setting output format invalid，please help！

Hi everyone, I’m testing audio recording on an iPhone 15 Plus using AVFoundation. Here’s a simplified version of my setup: let settings: [String: Any] = [ AVFormatIDKey: Int(kAudioFormatLinearPCM), AVSampleRateKey: 8000, AVNumberOfChannelsKey: 1, AVLinearPCMBitDepthKey: 16, AVLinearPCMIsFloatKey: false ] audioRecorder = try AVAudioRecorder(url: fileURL, settings: settings) audioRecorder?.record() When I check the recorded file’s sample rate, it logs: Actual sample rate: 8000.0 However, when I inspect the hardware sample rate: try session.setCategory(.playAndRecord, mode: .default) try session.setActive(true) print("Hardware sample rate:", session.sampleRate) I consistently get: `Hardware sample rate: 48000.0 My questions are: Is the iPhone mic actually capturing at 8 kHz, or is it recording at 48 kHz and then downsampling to 8 kHz internally? Is there any way to force the hardware to record natively at 8 kHz? If not, what’s the recommended approach for telephony-quality audio (true 8 kHz) on iOS devices? Thanks in advance for your guidance!

I'm working in Swift/SwiftUI, running XCode 16.3 on macOS 15.4 and I've seen this when running in the iOS simulator and in a macOS app run from XCode. I've also seen this behaviour with 3 different audio files. Nothing in the documentation says that the speechRecognitionMetadata property on an SFSpeechRecognitionResult will be nil until isFinal, but that's the behaviour I'm seeing. I've stripped my class down to the following: private var isAuthed = false // I call this in a .task {} in my SwiftUI View public func requestSpeechRecognizerPermission() { SFSpeechRecognizer.requestAuthorization { authStatus in Task { self.isAuthed = authStatus == .authorized } } } public func transcribe(from url: URL) { guard isAuthed else { return } let locale = Locale(identifier: "en-US") let recognizer = SFSpeechRecognizer(locale: locale) let recognitionRequest = SFSpeechURLRecognitionRequest(url: url) // the behaviour occurs whether I set this to true or not, I recently set // it to true to see if it made a difference recognizer?.supportsOnDeviceRecognition = true recognitionRequest.shouldReportPartialResults = true recognitionRequest.addsPunctuation = true recognizer?.recognitionTask(with: recognitionRequest) { (result, error) in guard result != nil else { return } if result!.isFinal { //speechRecognitionMetadata is not nil } else { //speechRecognitionMetadata is nil } } } } Further, and this isn't documented either, the SFTranscriptionSegment values don't have correct timestamp and duration values until isFinal. The values aren't all zero, but they don't align with the timing in the audio and they change to accurate values when isFinal is true. The transcription otherwise "works", in that I get transcription text before isFinal and if I wait for isFinal the segments are correct and speechRecognitionMetadata is filled with values. The context here is I'm trying to generate a transcription that I can then highlight the spoken sections of as audio plays and I'm thinking I must be just trying to use the Speech framework in a way it does not work. I got my concept working if I pre-process the audio (i.e. run it through until isFinal and save the results I need to json), but being able to do even a rougher version of it 'on the fly' - which requires segments to have the right timestamp/duration before isFinal - is perhaps impossible?

I’m working with the Push-to-Talk (PTT) framework and observing a consistent delay when starting audio capture. Scenario: A PTT call is already active The AVAudioSession is fully configured I request beginTransmission on the PTT channel I start my Audio Unit for recording (AudioOutputUnitStart) Observed behavior: AudioOutputUnitStart takes ~500 ms This happens whether I start the Audio Unit: after didBeginTransmission, or after AVAudioSession didActivate Comparison: Using the same Audio Unit, same format, and same configuration Without the PTT framework, AudioOutputUnitStart takes ~200 ms Additional notes: I am not modifying or reconfiguring AVAudioSession when requesting beginTransmission The audio session is already set up when the PTT call starts There are no interruptions or route changes at the time of starting the Audio Unit Impact: This extra latency is significant for Push-to-Talk use cases where fast transmit start is critical.

I have integrated the ShazamKit SDK into my iOS app and would like to implement the same functionality in my Android app. My question is: Can I use the Android version of the ShazamKit SDK for commercial purposes? After extensive research, I could not find any official information regarding the license of the Android version of the ShazamKit SDK. Could you please provide a formal license statement?