Dive into the technical aspects of audio on your device, including codecs, format support, and customization options.

Audio Documentation

Posts under Audio subtopic

Post

Replies

Boosts

Views

Activity

APNs
{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?
1
0
236
Oct ’25
AVAudioEngine failing with -10877 on macOS 26 beta, no devices detected via AVFoundation but HAL works
I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]
0
0
452
Jul ’25
MusicKit: Best way to check if all tracks of albums are added to library.
I prefer to use the album fetched from the library instead of the catalog since this is faster. If doing so, how can I check if all tracks of an album are added to the library. In this case I'd like to fetch the catalog version or throw an error (for example when offline). Using .with(.tracks) on the library album fetches the tracks added to the library. The trackCount property is referring to the tracks that can be fetched from the library. The isComplete property is always nil when fetching from the library. One possible way is checking the trackNumber and discCount properties. However this only detects that not all tracks of an album are added to the library if there is a song not added ahead of one that is. I'd like to be able to handle this edge case as well. Is there currently a way to do this? I'd prefer to not rely on the apple music catalog for this since this is supposed to work offline as well. Fetching and storing all trackIDs when connected and later comparing against these would work, but this would potentially mean storing tens of thousands of track ids. Thank you
0
0
104
Mar ’25
Incorrect 5.1 / Atmos channel mapping on Apple TV 4K (2022)
I ran 5.1 audio tests in both YouTube and Apple Music, and I noticed that when sound is supposed to play from the rear or front surround speakers, it’s also duplicated in the front left and right channels. I’m absolutely sure the issue is with the Apple TV, because I played the same video directly through my TV’s native system, and the channel separation was correct. Everything used to work perfectly before, so this must be a software issue. I’m currently on tvOS 26 Developer Beta 5, but I’m certain the problem also existed on the stable tvOS 18.5. I’ve already reset and updated my Apple TV, and I also tried switching the audio format to forced Dolby Atmos 5.1. On the forums, I mostly see complaints about Dolby Atmos not working at all — in my case, everything technically works, but not the way it’s supposed to.
1
0
99
Aug ’25
Track changes in the browser tab's audibility property.
Hi! I am writing a browser extension that allows you to control the playback of media content on a music service website. Unfortunately Safari does not support tracking changes to the audible property in an event tabs.onUpdated. Is there an alternative to this event? I'm looking for a way to track when the automatic inference engine interrupts playback on a music service website. That you.
0
0
99
Apr ’25
Unexpected AVAudioSession behavior after iOS 18.5 causing audio loss in VoIP calls
After updating to iOS 18.5, we’ve observed that outgoing audio from our app intermittently stops being transmitted during VoIP calls using AVAudioSession configured with .playAndRecord and .voiceChat. The session is set active without errors, and interruptions are handled correctly, yet audio capture suddenly ceases mid-call. This was not observed in earlier iOS versions (≤ 18.4). We’d like to confirm if there have been any recent changes in AVAudioSession, CallKit, or related media handling that could affect audio input behavior during long-running calls. func configureForVoIPCall() throws { try setCategory( .playAndRecord, mode: .voiceChat, options: [.allowBluetooth, .allowBluetoothA2DP, .defaultToSpeaker]) try setActive(true) }
1
0
284
Aug ’25
watchOS longFormAudio cannot de active
My workout watch app supports audio playback during exercise sessions. When users carry both Apple Watch, iPhone, and AirPods, with AirPods connected to the iPhone, I want to route audio from Apple Watch to AirPods for playback. I've implemented this functionality using the following code. try? session.setCategory(.playback, mode: .default, policy: .longFormAudio, options: []) try await session.activate() When users are playing music on iPhone and trigger my code in the watch app, Apple Watch correctly guides users to select AirPods, pauses the iPhone's music, and plays my audio. However, when playback finishes and I end the session using the code below: try session.setActive(false, options:[.notifyOthersOnDeactivation]) the iPhone doesn't automatically resume the previously interrupted music playback—it requires manual intervention. Is this expected behavior, or am I missing other important steps in my code?
1
0
328
Nov ’25
iOS Audio Routing - Bluetooth Output + Built-in Microphone Input
Hello! I'm experiencing an issue with iOS's audio routing system when trying to use Bluetooth headphones for audio output while also recording environmental audio from the built-in microphone. Desired behavior: Play audio through Bluetooth headset (AirPods) Record unprocessed environmental audio from the iPhone's built-in microphone Actual behavior: When explicitly selecting the built-in microphone, iOS reports it's using it (in currentRoute.inputs) However, the actual audio data received is clearly still coming from the AirPods microphone The audio is heavily processed with voice isolation/noise cancellation, removing environmental sounds Environment Details Device: iPhone 12 Pro Max iOS Version: 18.4.1 Hardware: AirPods Audio Framework: AVAudioEngine (also tried AudioQueue) Code Attempted I've tried multiple approaches to force the correct routing: func configureAudioSession() { let session = AVAudioSession.sharedInstance() // Configure to allow Bluetooth output but use built-in mic try? session.setCategory(.playAndRecord, options: [.allowBluetoothA2DP, .defaultToSpeaker]) try? session.setActive(true) // Explicitly select built-in microphone if let inputs = session.availableInputs, let builtInMic = inputs.first(where: { $0.portType == .builtInMic }) { try? session.setPreferredInput(builtInMic) print("Selected input: \(builtInMic.portName)") } // Log the current route let route = session.currentRoute print("Current input: \(route.inputs.first?.portName ?? "None")") // Configure audio engine with native format let inputNode = audioEngine.inputNode let nativeFormat = inputNode.inputFormat(forBus: 0) inputNode.installTap(onBus: 0, bufferSize: 1024, format: nativeFormat) { buffer, time in // Process audio buffer // Despite showing "Built-in Microphone" in route, audio appears to be // coming from AirPods with voice isolation applied - welp! } try? audioEngine.start() } I've also tried various combinations of: Different audio session modes (.default, .measurement, .voiceChat) Different option combinations (with/without .allowBluetooth, .allowBluetoothA2DP) Setting session.setPreferredInput() both before and after activation Diagnostic Observations When AirPods are connected: AVAudioSession.currentRoute.inputs correctly shows "Built-in Microphone" after setPreferredInput() The actual audio data received shows clear signs of AirPods' voice isolation processing Background/environmental sounds are actively filtered out... When recording a test audio played near the phone (not through the app), the recording is nearly silent. Only headset voice goes through. Questions Is there a workaround to force iOS to actually use the built-in microphone while maintaining Bluetooth output? Are there any lower-level configurations that might resolve this issue? Any insights, workarounds, or suggestions would be greatly appreciated. This is blocking a critical feature in my application that requires environmental audio recording while providing audio feedback through headphones 😅
0
0
220
May ’25
SpeechAnalyzer.start(inputSequence:) fails with _GenericObjCError nilError, while the same WAV succeeds with start(inputAudioFile:)
I'm trying to use the new Speech framework for streaming transcription on macOS 26.3, and I can reproduce a failure with SpeechAnalyzer.start(inputSequence:). What is working: SpeechAnalyzer + SpeechTranscriber offline path using start(inputAudioFile:finishAfterFile:) same Spanish WAV file transcribes successfully and returns a coherent final result What is not working: SpeechAnalyzer + SpeechTranscriber stream path using start(inputSequence:) same WAV, replayed as AnalyzerInput(buffer:bufferStartTime:) fails once replay starts with: _GenericObjCError domain=Foundation._GenericObjCError code=0 detail=nilError I also tried: DictationTranscriber instead of SpeechTranscriber no realtime pacing during replay Both still fail in stream mode with the same error. So this does not currently look like a ScreenCaptureKit issue or a Python integration issue. I reduced it to a pure Swift CLI repro. Environment: macOS 26.3 (25D122) Xcode 26.3 Swift 6.2.4 Apple Silicon Mac Has anyone here gotten SpeechAnalyzer.start(inputSequence:) working reliably on macOS 26.x? If so, I'd be interested in any workaround or any detail that differs from the obvious setup: prepareToAnalyze(in:) bestAvailableAudioFormat(...) AnalyzerInput(buffer:bufferStartTime:) replaying a known-good WAV in chunks I already filed Feedback Assistant: FB22149971
1
0
326
2d
AVAudioEngine : Split 1x4 channel bus into 4x1 channel busses?
I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];
2
0
302
Oct ’25
USB microphone input : Mac "Designed for iPad"
My app - natively iOS but built with the "Designed for iPad" option to run on Mac - does not recognise an attached USB microphone when running on a Mac. This line int32_t items = (int32_t) [[[AVAudioSession sharedInstance] availableInputs] count ]; returns 1, which is the Mac internal mic. On iPad and iPhone it sees both the internal mic and the USB mic. Is this an inherent "Designed for iPad" restriction, and is there some trick I can pull to get the USB microphone to be recognised by the system?
1
0
269
Jan ’26
MIDI output form Standalone MIDI Processor Demo App to DAW
I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }
0
0
520
Aug ’25
ApplicationMusicPlayer fails play in macCatalyst 26.3 due to RemotePlayerService crash
I've filed this as FB21446798 but figured I'd post here too. In the first build of macOS 26.3, playback via ApplicationMusicPlayer is completely broken. When starting playback of anything at all, the console shows the following error: applicationController: xpc service connection interrupted Failed to obtain remoteObject: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.} Failed to prepareToPlay with error: Error Domain=MPMusicPlayerControllerErrorDomain Code=10 "(null)" UserInfo={NSUnderlyingError=0xc92910ff0 {Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.}}} In addition, several crash logs for RemotePlayerService are generated, showing my app as the parent process. This issue is 100% repeatable. No matter how I load the queue, whether it’s catalog or library content, any variation I can think of all fails like this. I really hope this can be fixed before 26.3 comes out, otherwise my app will be totally unusable. 😅
2
0
685
Jan ’26
Number of songs in the Apple Music Feed
Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!
0
0
303
Aug ’25
Mic audio before and after a call is answered
I have an app that records a health provider’s conversation with a patient. I am using Audio Queue Services for this. If a phone call comes in while recording, the doctor wants to be able to ignore the call and continue the conversation without touching the phone. If the doctor answers the call, that’s fine – I will stop the recording. I can detect when the call comes in and ends using CXCallObserver and AVAudioSession.interruptionNotification. Unfortunately, when a call comes in and before it is answered or dismissed, the audio is suppressed. After the call is dismissed, the audio continues to be suppressed. How can I continue to get audio from the mic as long as the user does not answer the phone call?
1
0
74
May ’25
Potential Documentation Error in kAudioAggregateDevicePropertyTapList Sample Code
Hi, I believe I've found a potential error in the sample code on the documentation page for creating and using a process tap with an aggregate device. The issue is in the section explaining how to add a tap to the aggregate device. I have already filed a Feedback Assistant ticket on this (ID: FB17411663) but haven't heard back for months. Capturing system audio with Core Audio taps The sample code for modifying the kAudioAggregateDevicePropertyTapList incorrectly uses the tapID as the target AudioObjectID when calling AudioObjectSetPropertyData. // (Code to get the list and potentially modify listAsArray) if var listAsArray = list as? [CFString] { // ... (modification logic) ... // Set the list back on the aggregate device. <--- The comment is correct list = listAsArray as CFArray _ = withUnsafeMutablePointer(to: &list) { list in // INCORRECT: This call uses tapID as the target object. AudioObjectSetPropertyData(tapID, &propertyAddress, 0, nil, propertySize, list) } } The kAudioAggregateDevicePropertyTapList is a property that belongs to the aggregate device, not the individual tap. Therefore, to set this property, the AudioObjectSetPropertyData function must target the AudioObjectID of the aggregate device itself. Using tapID as the first argument is logically incorrect for this operation and will not update the aggregate device as intended. Furthermore, the preceding AudioObjectGetPropertyData call to fetch the list also appears to use the incorrect tapID as its target in the sample. The AudioObjectID for both getting and setting this property should be the ID of the aggregate device. _ = AudioObjectGetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, &propertySize, &list) _ = AudioObjectSetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, propertySize, newList) Thank you!
0
0
475
Sep ’25
Hybrid Wired-to-Wireless Audio Mode Using AirPods Charging Case
Many Apple users own both Bluetooth earphones (AirPods) and traditional wired earphones. While Bluetooth audio provides freedom of movement, some users still prefer wired earphones for comfort, sound profile, or personal preference. However, plugging wired earphones directly into an iPhone can feel restrictive and inconvenient during daily use. This proposal suggests a hybrid audio approach where wired earphones can be connected to a Bluetooth-enabled AirPods charging case (or a similar Apple-designed module), allowing users to enjoy wired earphones without a physical connection to the iPhone. #Problem Statement *Wired earphones offer consistent audio quality and zero latency *Bluetooth earphones provide freedom from cables *Users must currently choose one or the other *Plugging wired earphones into an iPhone limits movement and can feel intrusive in daily scenarios (walking, commuting, working) There is no native Apple solution that allows wired earphones to function wirelessly while maintaining Apple’s audio experience standards. #Proposed Solution Introduce a Wired-to-Wireless Audio Mode through the AirPods charging case or a dedicated Apple Bluetooth audio bridge. How it works: User plugs wired earphones into the AirPods case (or a future AirPods accessory port) The case acts as a Bluetooth audio transmitter Audio is streamed wirelessly from iPhone to the case The case outputs audio to the wired earphones #User experiences: No cable connected to the iPhone Familiar wired earphone sound Freedom of movement similar to Bluetooth earbuds User Experience (UX Flow) Plug wired earphones into the AirPods case iPhone automatically detects: “Wired Earphones via AirPods Case” Seamless pairing using existing AirPods framework Audio controls, volume, and switching handled through iOS No additional apps required #Key Benefits Combines wired sound reliability with wireless convenience Reduces physical cable disturbance during use Extends usefulness of existing wired earphones Minimal learning curve for users Fits naturally into Apple’s ecosystem and design philosophy #Privacy & Performance Considerations On-device audio processing only No cloud involvement Low-latency audio using Apple’s proprietary Bluetooth codecs Power-efficient usage leveraging AirPods case battery #Target Users Users who prefer wired earphones but want wireless freedom Commuters and walkers Developers and professionals who multitask Users sensitive to Bluetooth earbud fit or comfort #Ecosystem Fit Builds on existing AirPods pairing and audio stack Aligns with Apple’s focus on seamless UX Could be implemented via: New AirPods hardware Firmware update + accessory Dedicated Apple audio bridge
1
0
306
Jan ’26
Play Audio and Recognize Speech in Car
Hello, I'm trying to determine the best/recommended AVAudioSession configuration (i.e category, mode, and options) for the following use-case. Essentially, I'd like to switch between periods of playing an audio file and then recognizing speech. The audio file is typically speech and I don't intend for playback and speech recognition to occur simultaneously. I'd like for the user to sill be able to interact with Siri and I'd like for it to work with CarPlay where navigation prompts can occur. I would assume the category to use is 'playAndRecord', but I'm not sure if it's better to just set that once for the entire lifecycle, or set to 'playback' for audio file playback and then switch to 'playAndRecord' for speech recognition . I'm also not sure on the best 'mode' and 'options' to set. Any suggestions would be appreciated. Thanks.
0
0
607
Sep ’25
Where is the License Agreement for Android version of ShazamKit?
I have integrated the ShazamKit SDK into my iOS app and would like to implement the same functionality in my Android app. My question is: Can I use the Android version of the ShazamKit SDK for commercial purposes? After extensive research, I could not find any official information regarding the license of the Android version of the ShazamKit SDK. Could you please provide a formal license statement?
1
0
147
Apr ’25
Problems recording audio on Tahoe 26.0 (Intel only)
I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.
2
0
452
Oct ’25
APNs
{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?
Replies
1
Boosts
0
Views
236
Activity
Oct ’25
AVAudioEngine failing with -10877 on macOS 26 beta, no devices detected via AVFoundation but HAL works
I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]
Replies
0
Boosts
0
Views
452
Activity
Jul ’25
MusicKit: Best way to check if all tracks of albums are added to library.
I prefer to use the album fetched from the library instead of the catalog since this is faster. If doing so, how can I check if all tracks of an album are added to the library. In this case I'd like to fetch the catalog version or throw an error (for example when offline). Using .with(.tracks) on the library album fetches the tracks added to the library. The trackCount property is referring to the tracks that can be fetched from the library. The isComplete property is always nil when fetching from the library. One possible way is checking the trackNumber and discCount properties. However this only detects that not all tracks of an album are added to the library if there is a song not added ahead of one that is. I'd like to be able to handle this edge case as well. Is there currently a way to do this? I'd prefer to not rely on the apple music catalog for this since this is supposed to work offline as well. Fetching and storing all trackIDs when connected and later comparing against these would work, but this would potentially mean storing tens of thousands of track ids. Thank you
Replies
0
Boosts
0
Views
104
Activity
Mar ’25
Incorrect 5.1 / Atmos channel mapping on Apple TV 4K (2022)
I ran 5.1 audio tests in both YouTube and Apple Music, and I noticed that when sound is supposed to play from the rear or front surround speakers, it’s also duplicated in the front left and right channels. I’m absolutely sure the issue is with the Apple TV, because I played the same video directly through my TV’s native system, and the channel separation was correct. Everything used to work perfectly before, so this must be a software issue. I’m currently on tvOS 26 Developer Beta 5, but I’m certain the problem also existed on the stable tvOS 18.5. I’ve already reset and updated my Apple TV, and I also tried switching the audio format to forced Dolby Atmos 5.1. On the forums, I mostly see complaints about Dolby Atmos not working at all — in my case, everything technically works, but not the way it’s supposed to.
Replies
1
Boosts
0
Views
99
Activity
Aug ’25
Track changes in the browser tab's audibility property.
Hi! I am writing a browser extension that allows you to control the playback of media content on a music service website. Unfortunately Safari does not support tracking changes to the audible property in an event tabs.onUpdated. Is there an alternative to this event? I'm looking for a way to track when the automatic inference engine interrupts playback on a music service website. That you.
Replies
0
Boosts
0
Views
99
Activity
Apr ’25
Unexpected AVAudioSession behavior after iOS 18.5 causing audio loss in VoIP calls
After updating to iOS 18.5, we’ve observed that outgoing audio from our app intermittently stops being transmitted during VoIP calls using AVAudioSession configured with .playAndRecord and .voiceChat. The session is set active without errors, and interruptions are handled correctly, yet audio capture suddenly ceases mid-call. This was not observed in earlier iOS versions (≤ 18.4). We’d like to confirm if there have been any recent changes in AVAudioSession, CallKit, or related media handling that could affect audio input behavior during long-running calls. func configureForVoIPCall() throws { try setCategory( .playAndRecord, mode: .voiceChat, options: [.allowBluetooth, .allowBluetoothA2DP, .defaultToSpeaker]) try setActive(true) }
Replies
1
Boosts
0
Views
284
Activity
Aug ’25
watchOS longFormAudio cannot de active
My workout watch app supports audio playback during exercise sessions. When users carry both Apple Watch, iPhone, and AirPods, with AirPods connected to the iPhone, I want to route audio from Apple Watch to AirPods for playback. I've implemented this functionality using the following code. try? session.setCategory(.playback, mode: .default, policy: .longFormAudio, options: []) try await session.activate() When users are playing music on iPhone and trigger my code in the watch app, Apple Watch correctly guides users to select AirPods, pauses the iPhone's music, and plays my audio. However, when playback finishes and I end the session using the code below: try session.setActive(false, options:[.notifyOthersOnDeactivation]) the iPhone doesn't automatically resume the previously interrupted music playback—it requires manual intervention. Is this expected behavior, or am I missing other important steps in my code?
Replies
1
Boosts
0
Views
328
Activity
Nov ’25
iOS Audio Routing - Bluetooth Output + Built-in Microphone Input
Hello! I'm experiencing an issue with iOS's audio routing system when trying to use Bluetooth headphones for audio output while also recording environmental audio from the built-in microphone. Desired behavior: Play audio through Bluetooth headset (AirPods) Record unprocessed environmental audio from the iPhone's built-in microphone Actual behavior: When explicitly selecting the built-in microphone, iOS reports it's using it (in currentRoute.inputs) However, the actual audio data received is clearly still coming from the AirPods microphone The audio is heavily processed with voice isolation/noise cancellation, removing environmental sounds Environment Details Device: iPhone 12 Pro Max iOS Version: 18.4.1 Hardware: AirPods Audio Framework: AVAudioEngine (also tried AudioQueue) Code Attempted I've tried multiple approaches to force the correct routing: func configureAudioSession() { let session = AVAudioSession.sharedInstance() // Configure to allow Bluetooth output but use built-in mic try? session.setCategory(.playAndRecord, options: [.allowBluetoothA2DP, .defaultToSpeaker]) try? session.setActive(true) // Explicitly select built-in microphone if let inputs = session.availableInputs, let builtInMic = inputs.first(where: { $0.portType == .builtInMic }) { try? session.setPreferredInput(builtInMic) print("Selected input: \(builtInMic.portName)") } // Log the current route let route = session.currentRoute print("Current input: \(route.inputs.first?.portName ?? "None")") // Configure audio engine with native format let inputNode = audioEngine.inputNode let nativeFormat = inputNode.inputFormat(forBus: 0) inputNode.installTap(onBus: 0, bufferSize: 1024, format: nativeFormat) { buffer, time in // Process audio buffer // Despite showing "Built-in Microphone" in route, audio appears to be // coming from AirPods with voice isolation applied - welp! } try? audioEngine.start() } I've also tried various combinations of: Different audio session modes (.default, .measurement, .voiceChat) Different option combinations (with/without .allowBluetooth, .allowBluetoothA2DP) Setting session.setPreferredInput() both before and after activation Diagnostic Observations When AirPods are connected: AVAudioSession.currentRoute.inputs correctly shows "Built-in Microphone" after setPreferredInput() The actual audio data received shows clear signs of AirPods' voice isolation processing Background/environmental sounds are actively filtered out... When recording a test audio played near the phone (not through the app), the recording is nearly silent. Only headset voice goes through. Questions Is there a workaround to force iOS to actually use the built-in microphone while maintaining Bluetooth output? Are there any lower-level configurations that might resolve this issue? Any insights, workarounds, or suggestions would be greatly appreciated. This is blocking a critical feature in my application that requires environmental audio recording while providing audio feedback through headphones 😅
Replies
0
Boosts
0
Views
220
Activity
May ’25
SpeechAnalyzer.start(inputSequence:) fails with _GenericObjCError nilError, while the same WAV succeeds with start(inputAudioFile:)
I'm trying to use the new Speech framework for streaming transcription on macOS 26.3, and I can reproduce a failure with SpeechAnalyzer.start(inputSequence:). What is working: SpeechAnalyzer + SpeechTranscriber offline path using start(inputAudioFile:finishAfterFile:) same Spanish WAV file transcribes successfully and returns a coherent final result What is not working: SpeechAnalyzer + SpeechTranscriber stream path using start(inputSequence:) same WAV, replayed as AnalyzerInput(buffer:bufferStartTime:) fails once replay starts with: _GenericObjCError domain=Foundation._GenericObjCError code=0 detail=nilError I also tried: DictationTranscriber instead of SpeechTranscriber no realtime pacing during replay Both still fail in stream mode with the same error. So this does not currently look like a ScreenCaptureKit issue or a Python integration issue. I reduced it to a pure Swift CLI repro. Environment: macOS 26.3 (25D122) Xcode 26.3 Swift 6.2.4 Apple Silicon Mac Has anyone here gotten SpeechAnalyzer.start(inputSequence:) working reliably on macOS 26.x? If so, I'd be interested in any workaround or any detail that differs from the obvious setup: prepareToAnalyze(in:) bestAvailableAudioFormat(...) AnalyzerInput(buffer:bufferStartTime:) replaying a known-good WAV in chunks I already filed Feedback Assistant: FB22149971
Replies
1
Boosts
0
Views
326
Activity
2d
AVAudioEngine : Split 1x4 channel bus into 4x1 channel busses?
I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];
Replies
2
Boosts
0
Views
302
Activity
Oct ’25
USB microphone input : Mac "Designed for iPad"
My app - natively iOS but built with the "Designed for iPad" option to run on Mac - does not recognise an attached USB microphone when running on a Mac. This line int32_t items = (int32_t) [[[AVAudioSession sharedInstance] availableInputs] count ]; returns 1, which is the Mac internal mic. On iPad and iPhone it sees both the internal mic and the USB mic. Is this an inherent "Designed for iPad" restriction, and is there some trick I can pull to get the USB microphone to be recognised by the system?
Replies
1
Boosts
0
Views
269
Activity
Jan ’26
MIDI output form Standalone MIDI Processor Demo App to DAW
I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }
Replies
0
Boosts
0
Views
520
Activity
Aug ’25
ApplicationMusicPlayer fails play in macCatalyst 26.3 due to RemotePlayerService crash
I've filed this as FB21446798 but figured I'd post here too. In the first build of macOS 26.3, playback via ApplicationMusicPlayer is completely broken. When starting playback of anything at all, the console shows the following error: applicationController: xpc service connection interrupted Failed to obtain remoteObject: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.} Failed to prepareToPlay with error: Error Domain=MPMusicPlayerControllerErrorDomain Code=10 "(null)" UserInfo={NSUnderlyingError=0xc92910ff0 {Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.}}} In addition, several crash logs for RemotePlayerService are generated, showing my app as the parent process. This issue is 100% repeatable. No matter how I load the queue, whether it’s catalog or library content, any variation I can think of all fails like this. I really hope this can be fixed before 26.3 comes out, otherwise my app will be totally unusable. 😅
Replies
2
Boosts
0
Views
685
Activity
Jan ’26
Number of songs in the Apple Music Feed
Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!
Replies
0
Boosts
0
Views
303
Activity
Aug ’25
Mic audio before and after a call is answered
I have an app that records a health provider’s conversation with a patient. I am using Audio Queue Services for this. If a phone call comes in while recording, the doctor wants to be able to ignore the call and continue the conversation without touching the phone. If the doctor answers the call, that’s fine – I will stop the recording. I can detect when the call comes in and ends using CXCallObserver and AVAudioSession.interruptionNotification. Unfortunately, when a call comes in and before it is answered or dismissed, the audio is suppressed. After the call is dismissed, the audio continues to be suppressed. How can I continue to get audio from the mic as long as the user does not answer the phone call?
Replies
1
Boosts
0
Views
74
Activity
May ’25
Potential Documentation Error in kAudioAggregateDevicePropertyTapList Sample Code
Hi, I believe I've found a potential error in the sample code on the documentation page for creating and using a process tap with an aggregate device. The issue is in the section explaining how to add a tap to the aggregate device. I have already filed a Feedback Assistant ticket on this (ID: FB17411663) but haven't heard back for months. Capturing system audio with Core Audio taps The sample code for modifying the kAudioAggregateDevicePropertyTapList incorrectly uses the tapID as the target AudioObjectID when calling AudioObjectSetPropertyData. // (Code to get the list and potentially modify listAsArray) if var listAsArray = list as? [CFString] { // ... (modification logic) ... // Set the list back on the aggregate device. <--- The comment is correct list = listAsArray as CFArray _ = withUnsafeMutablePointer(to: &list) { list in // INCORRECT: This call uses tapID as the target object. AudioObjectSetPropertyData(tapID, &propertyAddress, 0, nil, propertySize, list) } } The kAudioAggregateDevicePropertyTapList is a property that belongs to the aggregate device, not the individual tap. Therefore, to set this property, the AudioObjectSetPropertyData function must target the AudioObjectID of the aggregate device itself. Using tapID as the first argument is logically incorrect for this operation and will not update the aggregate device as intended. Furthermore, the preceding AudioObjectGetPropertyData call to fetch the list also appears to use the incorrect tapID as its target in the sample. The AudioObjectID for both getting and setting this property should be the ID of the aggregate device. _ = AudioObjectGetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, &propertySize, &list) _ = AudioObjectSetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, propertySize, newList) Thank you!
Replies
0
Boosts
0
Views
475
Activity
Sep ’25
Hybrid Wired-to-Wireless Audio Mode Using AirPods Charging Case
Many Apple users own both Bluetooth earphones (AirPods) and traditional wired earphones. While Bluetooth audio provides freedom of movement, some users still prefer wired earphones for comfort, sound profile, or personal preference. However, plugging wired earphones directly into an iPhone can feel restrictive and inconvenient during daily use. This proposal suggests a hybrid audio approach where wired earphones can be connected to a Bluetooth-enabled AirPods charging case (or a similar Apple-designed module), allowing users to enjoy wired earphones without a physical connection to the iPhone. #Problem Statement *Wired earphones offer consistent audio quality and zero latency *Bluetooth earphones provide freedom from cables *Users must currently choose one or the other *Plugging wired earphones into an iPhone limits movement and can feel intrusive in daily scenarios (walking, commuting, working) There is no native Apple solution that allows wired earphones to function wirelessly while maintaining Apple’s audio experience standards. #Proposed Solution Introduce a Wired-to-Wireless Audio Mode through the AirPods charging case or a dedicated Apple Bluetooth audio bridge. How it works: User plugs wired earphones into the AirPods case (or a future AirPods accessory port) The case acts as a Bluetooth audio transmitter Audio is streamed wirelessly from iPhone to the case The case outputs audio to the wired earphones #User experiences: No cable connected to the iPhone Familiar wired earphone sound Freedom of movement similar to Bluetooth earbuds User Experience (UX Flow) Plug wired earphones into the AirPods case iPhone automatically detects: “Wired Earphones via AirPods Case” Seamless pairing using existing AirPods framework Audio controls, volume, and switching handled through iOS No additional apps required #Key Benefits Combines wired sound reliability with wireless convenience Reduces physical cable disturbance during use Extends usefulness of existing wired earphones Minimal learning curve for users Fits naturally into Apple’s ecosystem and design philosophy #Privacy & Performance Considerations On-device audio processing only No cloud involvement Low-latency audio using Apple’s proprietary Bluetooth codecs Power-efficient usage leveraging AirPods case battery #Target Users Users who prefer wired earphones but want wireless freedom Commuters and walkers Developers and professionals who multitask Users sensitive to Bluetooth earbud fit or comfort #Ecosystem Fit Builds on existing AirPods pairing and audio stack Aligns with Apple’s focus on seamless UX Could be implemented via: New AirPods hardware Firmware update + accessory Dedicated Apple audio bridge
Replies
1
Boosts
0
Views
306
Activity
Jan ’26
Play Audio and Recognize Speech in Car
Hello, I'm trying to determine the best/recommended AVAudioSession configuration (i.e category, mode, and options) for the following use-case. Essentially, I'd like to switch between periods of playing an audio file and then recognizing speech. The audio file is typically speech and I don't intend for playback and speech recognition to occur simultaneously. I'd like for the user to sill be able to interact with Siri and I'd like for it to work with CarPlay where navigation prompts can occur. I would assume the category to use is 'playAndRecord', but I'm not sure if it's better to just set that once for the entire lifecycle, or set to 'playback' for audio file playback and then switch to 'playAndRecord' for speech recognition . I'm also not sure on the best 'mode' and 'options' to set. Any suggestions would be appreciated. Thanks.
Replies
0
Boosts
0
Views
607
Activity
Sep ’25
Where is the License Agreement for Android version of ShazamKit?
I have integrated the ShazamKit SDK into my iOS app and would like to implement the same functionality in my Android app. My question is: Can I use the Android version of the ShazamKit SDK for commercial purposes? After extensive research, I could not find any official information regarding the license of the Android version of the ShazamKit SDK. Could you please provide a formal license statement?
Replies
1
Boosts
0
Views
147
Activity
Apr ’25
Problems recording audio on Tahoe 26.0 (Intel only)
I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.
Replies
2
Boosts
0
Views
452
Activity
Oct ’25