My app utilizes background audio to play music files. I have the audio background mode enabled and I initialize the AVAudioSession in playback mode with the mixWithOthers option. And it usually works great while the app is backgrounded. I listen for audio interruptions as well as route changes and I am able to handle them appropriately and I can usually resume my background audio no problem. I discovered an issue while connected to CarPlay though. Roughly 50% of the time when I disconnect from a phone call while connected to CarPlay I get the following error after calling the play() method of my AVAudioPlayer instance: "ATAudioSessionClientImpl.mm:281 activation failed. status = 561015905" If I instead try to start a new audio session I get a similar error: Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed} Like I said, this isn't reproducible 100% of the time and is so far only seen while connected to CarPlay. I don't think Im forgetting so additional capability or plist setting, but if anyone has any clues it would be greatly appreciated. Otherwise this is likely just a bug that I need to report to Apple. One very important note, and reason I believe it's just a bug, is that while I was testing I found that other music apps like Spotify will also fail to resume their audio at the same time my app fails. Another important detail is that when it works successfully I receive the audio session interruption ended notification, and when it doesn't work I only receive a route configuration change or route override notification. From there I am able to still successfully granted background time to execute code, but my call to resume audio fails with the above mentioned error codes.

Among the millions of users of our online product, we have identified through data metrics that the silent audio data capture rate on iPadOS 18.4.1 or 18.5 has increased abnormally. However, we are unable to reproduce the issue. Has anyone encountered a similar issue? The parameters we used are as follows: AudioSession: category:AVAudioSessionCategoryPlayAndRecord mode:AVAudioSessionModeDefault option:77 preferredSampleRate:48000.000000 preferredIOBufferDuration:0.010000 AudioUnit format.mFormatID = kAudioFormatLinearPCM; format.mSampleRate = 48000.0; format.mChannelsPerFrame = 2; format.mBitsPerChannel = 16; format.mFramesPerPacket = 1; format.mBytesPerFrame = format.mChannelsPerFrame * 16 / 8; format.mBytesPerPacket = format.mBytesPerFrame * format.mFramesPerPacket; format.mFormatFlags = kAudioFormatFlagsNativeEndian | kLinearPCMFormatFlagIsPacked | kLinearPCMFormatFlagIsSignedInteger; component.componentType = kAudioUnitType_Output; component.componentSubType = kAudioUnitSubType_RemoteIO; component.componentManufacturer = kAudioUnitManufacturer_Apple; component.componentFlags = 0; component.componentFlagsMask = 0;

I'm developing a TTS Audio Unit Extension that needs to write trace/log files to a shared App Group container. While the main app can successfully create and write files to the container, the extension gets sandbox denied errors despite having proper App Group entitlements configured. Setup: Main App (Flutter) and TTS Audio Unit Extension share the same App Group App Group is properly configured in developer portal and entitlements Main app successfully creates and uses files in the container Container structure shows existing directories (config/, dictionary/) with populated files Both targets have App Group capability enabled and entitlements set Current behavior: Extension can access/read the App Group container Extension can see existing directories and files All write attempts are blocked with "sandbox deny(1) file-write-create" errors Code example: const char* createSharedGroupPathWithComponent(const char* groupId, const char* component) { NSString* groupIdStr = [NSString stringWithUTF8String:groupId]; NSString* componentStr = [NSString stringWithUTF8String:component]; NSURL* url = [[NSFileManager defaultManager] containerURLForSecurityApplicationGroupIdentifier:groupIdStr]; NSURL* fullPath = [url URLByAppendingPathComponent:componentStr]; NSError *error = nil; if (![[NSFileManager defaultManager] createDirectoryAtPath:fullPath.path withIntermediateDirectories:YES attributes:nil error:&error]) { NSLog(@"Unable to create directory %@", error.localizedDescription); } return [[fullPath path] UTF8String]; } Error output: Sandbox: simaromur-extension(996) deny(1) file-write-create /private/var/mobile/Containers/Shared/AppGroup/36CAFE9C-BD82-43DD-A962-2B4424E60043/trace Key questions: Are there additional entitlements required for TTS Audio Unit Extensions to write to App Group containers? Is this a known limitation of TTS Audio Unit Extensions? What is the recommended way to handle logging/tracing in TTS Audio Unit Extensions? If writing to App Group containers is not supported, what alternatives are available? Current entitlements: <dict> <key>com.apple.security.application-groups</key> <array> <string>group.com.<company>.<appname></string> </array> </dict>

I developed an educational app that implements audio-video communication through RTC, while using WebView to display course materials during classes. However, some users are experiencing an issue where the audio playback from WebView is very quiet. I've checked that the AVAudioSessionCategory is set by RTC to AVAudioSessionCategoryPlayAndRecord, and the AVAudioSessionCategoryOption also includes AVAudioSessionCategoryOptionMixWithOthers. What could be causing the WebView audio to be suppressed, and how can this be resolved?

I am developing an app that uses MusicKit to play music and then I need to have spoken words played to the user, while ducking the audio coming from MusicKit (application music player) the built in Siri voices are not off sufficient quality so I am using an external service to create an mp3 file and then play this back using AVAudioSession Sample code below the problem I am having is that .duckOthers is not ducking the Application Music Player output Is this a bug or am I doing this wrong? // Configure audio session for system-wide ducking try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio, options: [.duckOthers, .mixWithOthers]) try AVAudioSession.sharedInstance().setActive(true) // Set the ducking level to maximum try AVAudioSession.sharedInstance().setPreferredIOBufferDuration(0.005) // Create and configure audio player self.audioPlayer = try AVAudioPlayer(data: audioData) self.audioPlayer?.delegate = self self.audioPlayer?.volume = 1.0 // Ensure full volume for speech self.audioPlayer?.prepareToPlay() // Set the audio player's settings for maximum clarity self.audioPlayer?.enableRate = false self.audioPlayer?.pan = 0.0 // Center the audio self.audioPlayer?.play()

We are currently working on a CarPlay navigation app and so far everything is working well except for speaking turn notifications. Our TTS implementation works fine on the phone and works fine on CarPlay if the voice is spoken over the speaker in the car. If users connect a BT headset to the car and listen through that headset, then the voice commands are chopped up / stutter. Why would users use BT headset? Well, we are working on a motorcycle app, and there are no speakers usually on a motorcycle. It sounds like the BT channel is opened and closed repeatedly for every character / word spoken. This happens on different CarPlay devices and different Bluetooth headsets, we have reports from multiple users that they find this behavior annoying and that other apps work fine. Is this a known issue? Are there possible workaround?

Hi, I'm still stuck getting a basic record-with-playthrouh pipeline to work. Has anyone a sample of setting up a AVAudioEngine pipeline for recording with playthrough? Plkaythrough works with AVPlayerNode as input but not with any microphone input. The docs mention the "enabled state" of the outputNode of the engine without explaining the concept, i.e. how to enable an output. When the engine renders to and from an audio device, the AVAudioSession category and the availability of hardware determines whether an app performs output. Check the output node’s output format (specifically, the hardware format) for a nonzero sample rate and channel count to see if output is in an enabled state. Well, in my setup the output is NOT enabled, and any attempt to switch (e.g. audioEngine.outputNode.auAudioUnit.setDeviceID(deviceID) )/ attach a dedicated device / ... results in exceptions / errors

Hi all, I’ve implemented the new Core Audio Tap API (AudioHardwareCreateProcessTap with CATapDescription) and I’m seeing consistent level attenuation that scales with the number of stereo output pairs exposed by the target device. What I observe Device with 4 stereo pairs (8 outs) → tap shows −12.04 dB relative to source. True 2-ch devices (built-in speakers, AirPods) → ~0 dB attenuation. The attenuation appears regardless of whether I: Create a global (default-output) tap via initStereoGlobalTapButExcludeProcesses: Or create a per-process/per-device tap via initWithProcesses:andDeviceUID:withStream: Additionally, the routing choice inside the sending app matters: App output to “System/Default Output” → I often see no attenuation. App output directly to a multi-out interface (e.g., RME Fireface) → I see the pair-count-scaled attenuation. I can query Core Audio for the number of output channels/pairs and gain-compensate (+20·log10(N_pairs) dB) and that matches my measurements for many cases. However, this compensation is not universally correct because it seems to depend on where each process routes its audio (Default Output vs. direct device), even when those processes are included in the same tap aggregate. Question Is there a supported way to obtain the raw, unattenuated streams for all processes through the Tap API—i.e., to bypass this automatic headroom/attenuation behavior entirely? If this attenuation is expected by design: Is there a documented rule for when it applies (global vs. device taps, per-process taps, stream selection, etc.)? Is there a property/flag to disable it, or a reliable, official method to compute the exact compensation (beyond counting stereo pairs)? Any guidance on ensuring consistent levels when multiple processes route differently (Default Output vs. direct device) but are captured by the same tap? Environment API: AudioHardwareCreateProcessTap + CATapDescription Devices: built-in output (2-ch), RME Fireface (8+ outs / 4+ stereo pairs) Behavior reproducible with both global and per-process/per-device tap descriptions. Attenuation example: 4 stereo pairs → −12.04 dB observed. Happy to provide a minimal sample, measurements, and device logs. Thanks! — David

Hello, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this? Do i need to create a custom catalog?

Hey everyone, I'm encountering an issue with audio sample rate conversion that I'm hoping someone can help with. Here's the breakdown: Issue Description: I've installed a tap on an input device to convert audio to an optimal sample rate. There's a converter node added on top of this setup. The problem arises when joining Zoom or FaceTime calls—the converter gets deallocated from memory, causing the program to crash. Symptoms: The converter node is being deallocated during video calls. The program crashes entirely when this happens. Traditional methods of monitoring sample rate changes (tracking nominal or actual sample rates) aren't working as expected. The Big Challenge: I can't figure out how to properly monitor sample rate changes. Listeners set up to track these changes don't trigger when the device joins a Zoom or FaceTime call. Please, if anyone has experience with this or knows a solution, I'd really appreciate your help. Thanks in advance! ⁠

Hi, I’m an iOS developer building an app with an use case that needs advanced playback on Apple Music subscription streams, specifically: • Real-time tempo change (BPM) during playback — i.e., time-stretch with key-lock, not just crossfade. • Beat-matched transitions between tracks. From what I can tell, this capability seems to exist only for approved partners and isn’t available through public MusicKit. Question: What’s the official request path to be evaluated for that restricted partner entitlement (application form, questionnaire, NDA, or internal team/BD contact)? If the entitlement identifier is internal, how can I get my account routed to the right Apple Music team? For reference, publicly announced partners include Algoriddim djay, Serato DJ Pro, rekordbox (AlphaTheta), and Engine DJ—all of which appear to implement mixing features that imply advanced playback (tempo/beat-matching) on Apple Music content. I’d prefer not to share product details publicly for the moment and can provide specifics privately if needed. Thanks in advance!

A bit of a novice to app development here but I have a paid developer account, I have registered the identifier for MusicKit on the developer website (using the bundle identifier I've selected in Xcode) but the option to add MusicKit as a capability is not available in Xcode? I've manually updated the certificates, closed the app and reopened it, started a new project and tried with a different demo project? Apologies if I am missing something obvious but could someone help me get this capability added?

Hi 👋! We have a SpriteKit-based app where we play AVAudio sounds in three different ways: Effects (incl. UI sounds) with AVAudioPlayer. Long looping tracks with AVAudioPlayer. Short animation effects on the timeline of SpriteKit's SKScene files (effectively SKAudioNode nodes). We've found that when you exit the app or otherwise interrupt audio plays, future audio plays often fail. For example, there's a WebKit-based video trailer inside the app, and if you play it, our looping background music track (2.) will stop playing, and won't resume as you close the trailer (return from WebKit). This is probably due to us not manually restarting the track (so may well be easily fixed). Periodically played AVAudioPlayer audio (1.) are not affected. However, the more concerning thing is that the audio tracks on SKScene file timelines (3.) will no longer play. My hypothesis is that AVAudioEngine gets interrupted, and needs to be restarted for those AVAudioNode elements to regain functionality. Thing is, we don't deal with AVAudioEngine at all currently in the app, meaning it is never initiated to begin with. Obviously things return to normal when you remove the app from short-term memory and restart it. However, it seems many of our users aren't doing this, and often report audio failing presumably due to some interruption in the past without the app ever being cleared from memory. Any idea why timeline-run SKAudioNodes would fail like this? Should the app react to app backgrounding/foregrounding regarding audio? Any help would be very much appreciated ✌️!

I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }

I am work an app development on an app which request an audio function in background as an alert sound. during debug testing , the function work fine, but once I testing standalone without debugging , The function not work , it will play out the sound when I back to app. does any way to trace the issues ?

Description: I have identified a specific issue when recording acoustic guitar and other instruments on the iPhone 17 Pro Max using native applications (Voice Memos, Camera). The recordings contain an unnatural metallic resonance (ringing artifacts) that should not be present. Testing and Methodology: Hardware Verification: Initially, I suspected a hardware defect in the audio chip or microphone. However, extensive testing with third-party software suggests this is likely a software-level issue. AudioShare Test: I conducted a test using the AudioShare app in "Measurement Mode" (which bypasses standard iOS system-wide audio processing). In this mode, the audio remains perfectly clean, and the metallic ringing disappears entirely. Conclusion: The issue is rooted in the DSP (Digital Signal Processing) algorithms that iOS applies for noise suppression or voice enhancement. These algorithms appear to misinterpret the high-frequency overtones of acoustic instruments as background noise and attempt to "filter" them, resulting in audible digital artifacts. Comparison Results: This issue has not been observed on devices from other brands or on older iPhone models (preliminary tests suggest older versions handle this better). Notably, the problem persists even in GarageBand, as the app still utilizes certain system-level processing layers. Proposed Solution: I suggest adding a "Raw Audio" or "Instrument Mode" toggle within the Microphone/Audio settings for native apps. This mode should disable aggressive DSP processing, similar to how the AVAudioSession.Mode.measurement works in specialized apps. Attachments: I am attaching 4 archives, including a final "Measurement Mode" folder with comparative samples (Measurement Mode vs. Standard Mode). The artifacts are most prominent when monitored through headphones.

Issue Description I'm implementing a system audio capture feature using AudioHardwareCreateProcessTap and AudioHardwareCreateAggregateDevice. The app successfully creates the tap and aggregate device, but when starting the IO procedure with AudioDeviceStart, it sometimes fails with OSStatus error 1852797029. (The operation couldn’t be completed. (OSStatus error 1852797029.)) The error occurs inconsistently, which makes it particularly difficult to debug and reproduce. Questions Has anyone encountered this intermittent "nope" error code (0x6e6f7065) when working with system audio capture? Are there specific conditions or system states that might trigger this error sporadically? Are there any known workarounds for handling this intermittent failure case? Any insights or guidance would be greatly appreciated. I'm wondering if anyone else has encountered this specific "nope" error code (0x6e6f7065) when working with system audio capture.

Environment→ ・Device: iPad 10th generation ・OS：**iOS18.3.2 We're using AVAudioPlayer to play a sound when a button is tapped. In our use case, this button can be tapped very frequently — roughly every 0.1 to 0.2 seconds. Each tap triggers the following function: var audioPlayer: AVAudioPlayer? func soundPlay(resource: String, type: String){ guard let path = Bundle.main.path(forResource: resource, ofType: type) else { return } do { audioPlayer = try AVAudioPlayer(contentsOf: URL(fileURLWithPath: path)) audioPlayer!.delegate = self try audioSession.setCategory(.playback) } catch { return } self.audioPlayer!.play() } The issue is that under high-frequency tapping (especially around 0.1–0.15s intervals), the app occasionally crashes. The crash does not occur every time, but it happens randomly — sometimes within 30 seconds, within 1 minute, or even 3 minutes of continuous tapping. Interestingly, adding a delay of 0.2 seconds between button taps seems to prevent the crash entirely. Delays shorter than 0.2 seconds (e.g.,0.15s,0.18s) still result in occasional crashes. My questions are: **Is this expected behavior from AVAudioPlayer or AVAudioSession? Could this be a known issue or a limitation in AVFoundation? Is there any documentation or guidance on handling frequent sound playback safely?** Any insights or recommendations on how to handle rapid, repeated audio playback more reliably would be appreciated.

【溦N51888M】腾龙公司会员申请流程步骤【罔纸 211239.com 】输入官惘到浏览器打开联系24小时在线业务人员办理上下，打开公司官网. 二、点击主页右上角注册按钮. 三、填写账号信息. 四、输入手机号，验证码，密码. 五、勾选用户协议，完成注册协议，完成注册. 注意：若出现账号已存在」提示，需重新设置唯一账号名称

Please consider adding the ability to programatically download Premium and Enhanced voices. At the moment it is extremely inconvenient for our users, as they have to navigate to settings themselves to download voices. Our app relies heavily on SpeechSynthesis integration, and it would greatly benefit from this feature. FB16307193