Hi, I'm currently developping an AVB hardware device, and I'm currently stuck because because the apple AVB stack is throwing me errors without much informations. Is there any way to have more information about these assertions and why they are happening ? Furtermore is there any documentation on theAppleAVBAudio module ? It would be very handy Here are the logs shown in the console: Filtering the log data using "process == "coreaudiod"" Timestamp Thread Type Activity PID TTL 2025-12-05 15:44:27.087043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.087545+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.088043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.088546+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.089043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.089545+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.090043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.090545+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.091043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.091545+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.092044+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.092544+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.093044+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.093552+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.094050+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.094543+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533

I want the audio session to always use the built-in microphone. However, when using the setPreferredInput() method like in this example private func enableBuiltInMic() { // Get the shared audio session. let session = AVAudioSession.sharedInstance() // Find the built-in microphone input. guard let availableInputs = session.availableInputs, let builtInMicInput = availableInputs.first(where: { $0.portType == .builtInMic }) else { print("The device must have a built-in microphone.") return } // Make the built-in microphone input the preferred input. do { try session.setPreferredInput(builtInMicInput) } catch { print("Unable to set the built-in mic as the preferred input.") } } and calling that function once in the initializer, the audio session still switches to the external microphone once one is plugged in. The session's preferredInput is nil again at that point, even if the built-in microphone is still listed in availableInputs. So, why is the preferredInput suddenly reset? when would be the appropriate time to set the preferredInput again? Observing the session’s availableInputs did not work and setting the preferredInput again in the routeChangeNotification handler seems a bad choice as it’s already a bit too late then.

The sysEx struct in the MIDIUniversalMessage struct has a channel member but the System Exclusive (7-Bit) Message doesn't have a channel field. The System Exclusive (7-Bit) Message has a # of bytes field but the sysEx struct doesn't have a nrOfBytes, byteCount or bytesUsed member. It looks like the channel member of the sysEx struct contains the number of used bytes. Is this a mistake in the header or did I misunderstand something?

Hello, I'm observing an intermittent memory leak being reported in the iOS Simulator when initializing and starting an AVAudioEngine. Even with minimal setup—just attaching a single AVAudioPlayerNode and connecting it to the mainMixerNode—Xcode's memory diagnostics and Instruments sometimes flag a leak. Here is a simplified version of the code I'm using: // This function is called when the user taps a button in the view controller: #import "ViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; } - (IBAction)myButtonAction:(id)sender { NSLog(@"Test"); soundCreate(); } @end // media.m static AVAudioEngine *audioEngine = nil; void soundCreate(void) { if (audioEngine != nil) return; [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryAmbient error:nil]; [[AVAudioSession sharedInstance] setActive:YES error:nil]; audioEngine = [[AVAudioEngine alloc] init]; AVAudioPlayerNode* playerNode = [[AVAudioPlayerNode alloc] init]; [audioEngine attachNode:playerNode]; [audioEngine connect:playerNode to:(AVAudioNode *)[audioEngine mainMixerNode] format:nil]; [audioEngine startAndReturnError:nil]; } In the memory leak report, the following call stack is repeated, seemingly in a loop: ListenerMap::InsertEvent(XAudioUnitEvent const&, ListenerBinding*) AudioToolboxCore ListenerMap::AddParameter(AUListener*, void*, XAudioUnitEvent const&) AudioToolboxCore AUListenerAddParameter AudioToolboxCore addOrRemoveParameterListeners(OpaqueAudioComponentInstance*, AUListenerBase*, AUParameterTree*, bool) AudioToolboxCore 0x180178ddf

hi all, as soon an audio is played in a whatever app, coreaudiod inserts a sleep prevent assertion for both, the system AND the display. can i somehow stop the insertion of the display sleep assertion? pid 223(coreaudiod): [0x00004e9e00058dc2] 00:03:18 PreventUserIdleDisplaySleep named: "com.apple.audio.AppleGFXHDAEngineOutputDP:10001:0:{B31A-08C6-00000000}.context.preventuseridledisplaysleep" Created for PID: 4145. where PID 4145 is spotify. but it doesn't matter which app is playing the audio. any help would be appreciated thanks

I've got a setup using AVAudioEngine with several tone generator nodes, each with a chain of processing nodes, the chains then mixed into the main output. Generator ➡️ Effect ➡️... ➡️ .mainMixerNode ➡️ .outputNode). Generator ➡️ Effect ➡️... ⤴️ ... Generator ➡️ Effect ➡️... ⤴️ The user should be able to mute any chain individually. I've found several potential approaches to muting, but not terribly happy with any of them. Adjust the amplitudes directly in my tone generators. Issue: Consumes CPU even when completely muted. 4 generators adds ~15% cpu, even when all chains are muted. Detach/attach chains that are muted/unmuted. Issue: Causes loud clicking/popping sounds whenever muted/unmuted. Fade mixer output volume while detaching/attaching a chain (just cutting the volume immediately to 0 doesn't get rid of the clicking/popping). Issue: Causes all channels to fade during the transition, so not ideal. The rest of these ideas are variations on making volume control+detatch/attach work for individual chains, since approach #3 worked well. Add an AVAudioMixer to the end of each chain (just for volume control). Issue: Only the mixer on the final chain functions -- the others block all output. Not sure what's going on there. Use matrix mixer (for multi-input volume control). Plus detach/attach to reduce CPU if necessary. Not yet attempted, due to perceived complexity and reports of fragility in order of wiring in. A bunch of effort before I even know if it's going to work. Develop my own fader node to put on the end of each channel. Unlike the tone generator (simple AVSourceNode), developing an effect node seems complex and time consuming. Might not even fix CPU use. I'm not completely averse to the learning curve of either 5 or 6, but would rather get some guidance on best approach before diving in. They both seem likely to take more effort than I'd like for the simple behavior I'm trying to achieve.

I have sent in a feedback report (FB18222398) but I have no idea if anyone has looked at it. I know from past experiences that Apple devs do look at these forums. This applies to each of the betas, 1, 2 and 3. I have created a new Personal Voice with each beta. I create a personal voice in English. When it's done processing, I tap Preview and it says in English what is expected. But after some time, an hour or a day, the language of the voice file changes languages and no longer works properly. If I press Preview it is no longer intelligible. I have a text to speech app and initially the created voice works but then when the language of the file changes, it no longer works. I have run an app on my iphone through Xcode that prints to the console the voices installed on the device with the language. Currently this is the voice file: Voice Identifier: com.apple.speech.personalvoice.AAA9C6F2-9125-475F-BA2F-22C63274991D Language: es-MX and on a second device the same personal voice is in a different language: Voice Identifier: com.apple.speech.personalvoice.AAA9C6F2-9125-475F-BA2F-22C63274991D Language: zh-CN Although, a previous personal voice file that listed as Spanish-Mexican played in English with a Spanish accent or when playing Spanish text, it sounded almost perfect. This current personal voice doesn't do that, and is unintelligible. Previous attempts have converted to Chinese. I hope someone can look into this.

I’m running the iOS 26.2 Public Beta update and my album artwork is missing from the music app (I’m not using Apple Music). I use google to get my album artwork. Do I need to wait for a new update?

Dear Sirs, I’ve written a virtual audio driver based on AudioDriverKit and running as dext in my MacOS app. Sometimes when waking up from a sleep state the recording side of my driver extension seems to hang and I don’t see any calls to my io_operation callback. Then the recording app like a DAW seems to hang when trying to start a recording. This doesn’t happen after short sleep states or after a complete new start of my MacBook. I already opened a case in Feedback-Assistant on 5th of May (FB17503622) which also includes a sysdiagnose and a ktrace but I didn't get any feedback so far. Meanwhile some of our customers are getting angry and I'd like to know if there's anything I could do to fix this problem on my side. We’re not sure whether this worked in previous MacOS versions, we think we didn’t observe this before 15.3.1 but at least since 15.3.1. we’ve seen this problem. Best regards, Johannes

We are currently working on a CarPlay navigation app and so far everything is working well except for speaking turn notifications. Our TTS implementation works fine on the phone and works fine on CarPlay if the voice is spoken over the speaker in the car. If users connect a BT headset to the car and listen through that headset, then the voice commands are chopped up / stutter. Why would users use BT headset? Well, we are working on a motorcycle app, and there are no speakers usually on a motorcycle. It sounds like the BT channel is opened and closed repeatedly for every character / word spoken. This happens on different CarPlay devices and different Bluetooth headsets, we have reports from multiple users that they find this behavior annoying and that other apps work fine. Is this a known issue? Are there possible workaround?

Does an artist similarity station broaden selection variety compared to a song similarity station? You don't have to answer if it is against nondisclosure terms.

I have a new 2725QC (Dell) Monitor that uses USB-C connection to connect with the iMac (2019, 27 inch) through the back port but the problem is that the volume control can currently only be done from the hardware, not the software control using the Apple keyboard. What should I do in terms of writing code to do this (Swift or Obj-C)? Is there a third-party solution for Intel iMac and ARM Mac?

A bit of a novice to app development here but I have a paid developer account, I have registered the identifier for MusicKit on the developer website (using the bundle identifier I've selected in Xcode) but the option to add MusicKit as a capability is not available in Xcode? I've manually updated the certificates, closed the app and reopened it, started a new project and tried with a different demo project? Apologies if I am missing something obvious but could someone help me get this capability added?

New to iOS development and I've been trying to make heads or tails of the documentation. I know there is a difference between the data fields returned from songs from the user library and from the category, but whenever I search on the apple site I can't find a list of each. For example, Im trying to get the releaseDate of a song in my library, but it seems I'll have to cross-query either the catalog entry for the using song.catalogID or the song.irsc but when I try to use them I can't find a cross reference between the two. I'm totally turned around. Also trying to determine if a song in my library has been favorited or not? isFavorited (or something similar) doesn't seem to be a thing. Using this code and trying to find a way to display a solid star if the song has been favorited or an empty one if it's not. Seems like a basic request but I can't find anything on how to do it. I've searched docs, googled, tried. Does apple want us to query the user's Favorited Songs playlist or something? How do I know which playlist that is? I know isFavorited isn't a thing, just using it here so you can see what my intension is: HStack(spacing: 10) { Image(systemName: song.isFavorited ? "star.fill" : "star") .foregroundColor(song.isFavorited ? .yellow : .gray) Image(systemName: "magnifyingglass") }

3 I am working on an application to get when input audio device is being used. Basically I want to know the application using the microphone (built-in or external) This app runs on macOS. For Mac versions starting from Sonoma I can use this code: int getAudioProcessPID(AudioObjectID process) { pid_t pid; if (@available(macOS 14.0, *)) { constexpr AudioObjectPropertyAddress prop { kAudioProcessPropertyPID, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain }; UInt32 dataSize = sizeof(pid); OSStatus error = AudioObjectGetPropertyData(process, &amp;prop, 0, nullptr, &amp;dataSize, &amp;pid); if (error != noErr) { return -1; } } else { // Pre sonoma code goes here } return pid; } which works. However, kAudioProcessPropertyPID was added in macOS SDK 14.0. Does anyone know how to achieve the same functionality on previous versions?

I'm getting Crashlytics crashes from some my users, deep in the Apple code: Crashed: AXSpeech EXC_BAD_ACCESS KERN_INVALID_ADDRESS 0x00000007ec54b360 0 libobjc.A.dylib 0x3c9c objc_retain_x8 + 16 1 AudioToolboxCore 0x99580 auoop::RenderPipeUser::~RenderPipeUser() + 112 2 AudioToolboxCore 0xe6090 -[AUAudioUnit_XPC internalDeallocateRenderResources] + 92 3 AVFAudio 0x90a0 AUInterfaceBaseV3::Uninitialize() + 60 4 AVFAudio 0x4cbe0 AVAudioEngineGraph::PerformCommand(AUGraphNodeBaseV3&, AVAudioEngineGraph::ENodeCommand, void*, unsigned int) const + 768 5 AVFAudio 0x56b0c AVAudioEngineGraph::_Uninitialize(NSError**) + 132 6 AVFAudio 0x7834 AVAudioEngineImpl::Stop(NSError**) + 388 7 AVFAudio 0x636c -[AVAudioEngine dealloc] + 52 8 TextToSpeech 0x30674 _TTSNameForVoiceInformation + 20864 9 libobjc.A.dylib 0x20a4 object_cxxDestructFromClass(objc_object*, objc_class*) + 116 10 libobjc.A.dylib 0x6e00 objc_destructInstance + 80 11 libobjc.A.dylib 0x104fc _objc_rootDealloc + 80 12 TextToSpeech 0x2d2f4 _TTSNameForVoiceInformation + 7680 13 TextToSpeech 0x496c TTSVocalizerCopyURLForFallbackResource + 8540 14 TextToSpeech 0x26094 TTSSpeechUnitTestingMode + 5548 15 libAXSpeechManager.dylib 0x108b0 -[AXSpeechManager .cxx_destruct] + 192 16 libobjc.A.dylib 0x20a4 object_cxxDestructFromClass(objc_object*, objc_class*) + 116 17 libobjc.A.dylib 0x6e00 objc_destructInstance + 80 18 libobjc.A.dylib 0x104fc _objc_rootDealloc + 80 19 libAXSpeechManager.dylib 0x5298 -[AXSpeechManager dealloc] + 268 20 Foundation 0x3b8a4 __NSThreadPerformPerform + 272 21 CoreFoundation 0xd3208 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 28 22 CoreFoundation 0xdf864 __CFRunLoopDoSource0 + 176 23 CoreFoundation 0x646c8 __CFRunLoopDoSources0 + 244 24 CoreFoundation 0x7a1c4 __CFRunLoopRun + 828 25 CoreFoundation 0x7f4dc CFRunLoopRunSpecific + 612 26 Foundation 0x420c4 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 212 27 libAXSpeechManager.dylib 0x13390 -[AXSpeechThread main] + 552 28 Foundation 0x5b634 __NSThread__start__ + 716 29 libsystem_pthread.dylib 0x16b8 _pthread_start + 148 30 libsystem_pthread.dylib 0xb88 thread_start + 8 It's most likely related to my use of AVSpeechSynthesizer. I do change some of the utterance fields, including the voice that's being used (which is set to a value from speechVoices()). UtilAudioIos_tts = AVSpeechSynthesizer() let utterance = AVSpeechUtterance utterance.voice = AVSpeechSynthesisVoice(identifier: voice.voiceCode) utterance.volume = volume utterance.pitchMultiplier = pitch utterance.rate = rate UtilAudioIos_tts!.speak(utterance) By coincidence or not, the following sometimes appears in the device log: 2023-05-30 20:35:29.948078+0100 <appname>[466:12882] [catalog] Unable to list voice folder and also, sometimes: 2023-05-30 20:37:35.345933+0100 <appname>[466:13298] [catalog] Query for com.apple.MobileAsset.VoiceServices.VoiceResources failed: 2 2023-05-30 20:37:35.360854+0100 rehearserfree[466:13433] [AXTTSCommon] MauiVocalizer: 11006 (Can't compile rule): regularExpression=\Oviedo(?=, (\x1b\\pause=\d+\\)?Florida)\b, message=unrecognized character follows \, characterPosition=1 2023-05-30 20:37:35.363163+0100 <appname>[466:13433] [AXTTSCommon] MauiVocalizer: 16038 (Resource load failed): component=ttt/re, uri=, contentType=application/x-vocalizer-rettt+text, lhError=88602000 2023-05-30 20:37:35.363182+0100 <appname>[466:13433] [AXTTSCommon] Error loading rules: 2147483648 All of these crashes have been on the various versions of iOS 16. Edit: I can't reproduce the crash myself - it's just some (not all) app users. The log entries above appear locally on my device (with no crash) but I can't see the logs of the users who have the crashes. Any idea what this might be caused by, or how to go about tracking the problem down?

ApplicationMusicPlayer is not available on watchOS but all other platforms. Is there a technical reason for that like battery life? Same goes for SystemMusicPlayer and MPMusicPlayerController. I already filed feedbacks for that.

I am a graduate student conducting research in speech/audio signal processing and multimodal interaction. Apple Vision Pro is widely recognized as a multimodal interactive system supporting voice, eye, and gesture inputs. However, I could not find detailed specifications or documentation about the audio input sampling rate used by the device’s built-in microphone array when capturing user audio. Specifically, I would like to understand: What is the default audio input sampling rate (e.g., 16 kHz, 44.1 kHz, 48 kHz, etc.) for the Vision Pro’s microphones? When developing with visionOS / AVAudioSession / AVAudioEngine, is there a documented or recommended sampling rate for audio capture? Are there any best practices or settings for enabling high-quality voice capture on Vision Pro (especially for voice research tasks)? For context, my work involves voice processing, analysis, and possibly on-device real-time speech recognition. Any pointers to relevant APIs, documentation or examples (especially regarding audio capture buffer size or available formats on visionOS) would be very helpful. Thank you in advance! Best regards.

In iOS 18, CarPlay shows an error: “There was a problem loading this content” after playback starts. Audio works fine, but the Now Playing screen doesn’t load. I’m using MPPlayableContentManager. This worked fine in iOS 17. Anyone else seeing this error in iOS 18?

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!