How to remove Matter accessory connection artefacts? This appears after connecting and then removing a Matter test accessory. Please see attached screenshot:

We are developing a matter device. How can we display our own APP under the Home device information?

I have an accessory with MFi authenticaiton passed(got 0xAA05) and identification accepted (got 0x1D02). But when I try to open the target stream by using iAP2 EA session framework, I always enounter the same error looking like: XPC connection error: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named com.apple.accessories.externalaccessory-server was invalidated from this process." UserInfo={NSDebugDescription=The connection to service named com.apple.accessories.externalaccessory-server was invalidated from this process.} anybody can tell me what it related with? And what can I do to go through it quickly? Thank you much in advance.

Hi I am implement my app with Core NFC , I found the module have their own UI , can I implement without the UI? we want the NFC scanning in background , not blocking the UI.

Hey everyone, how’s it going? I’d like to know if, by enrolling in Apple’s MFi program, I’ll gain access to develop my own tags and my own app to track them using Apple’s Find network. I also read that there’s an estimated cost of $4 per device—does that apply to each device produced, or only at the time of registering the device, with no fee for additional units?

On iOS 18.x when try to create EASession we get nil, but on iOS 17.x everything works. We have app which use USB cable for connecting external accessories. Scenario is when we have fresh instal, connecting with accessory work fine, EASession is created, streams are opened. When we unplug USB, we close streams, remove any reference to session and accessory, remove accessory delegate. When plug it again, creating EASession is returning nil. Only after restarting iPhone, we can create new EASession with appropriate protocol and accessory. Every next attempt without reseting iPhone is failing. Logs from accessory is following: 00:05:51.811000 : onUSBDeviceFound(pDevice=0xffc818)) iPhone USB device already in the device list w/id=1 -> update status now[21;1H 00:05:51.830000 : setConnectionStatus(status=connected) [devId=1] state updated -> forward[21;1H Capabilities indicate HostMode possibility => role switch is triggered 00:05:52.848000 : updateDIPODeviceConnections() iPhoneUSB w/caps=5 (=CarPlay or HostMode), deviceTag=2 in Device mode -> request role switch[21;1H Role switch seems to be successful 00:05:54.914000 : setSwitching('stable') changed[21;1H 00:05:54.915000 : updateDIPODeviceConnections() iPhoneUSB w/caps=2, id=1, deviceTag=2 and native transport -> request app launch and call connectUSB[21;1H 00:05:54.967000 : ConnectiAP2(05ac:12a8, s/n='00008101000160921E90801E', writeFD='/dev/ffs/ep3', readFD='/dev/ffs/ep4', hostMode){3}[21;1H Native transport should become available but does not (the following line is not present for failed case. Taken from successful case) 00:05:24.983000 : OnDBusPropChanged_NativeTransport(): deviceId=2, started=1, iAP2iOSAppIdentifier=1, sinkEndpoint=3, sourceEndpoint=4, TransactionID=1 EAP Start event not received (trace line from success try) 00:05:25.057000 : EAPSessionStart(ctx=0x74e0b800){2} called[21;1H Is there any braking change on iOS 18 considering EASession? Also what is strange is that it works on fresh instal/restart iPhone, but not working on second attempt?

I have a 4-input, 4-output hardware device and an 8-input, 8-output virtual device, which I combine into an aggregate device. I am using the SimplyCoreAudio library to get the channel count. The code is as follows: aggregationDevice!.channels(scope: .input) =>> 12 aggregationDevice!.channels(scope: .output) =>> 12 When the program's MicrophoneMode is set to standard, the channel count is correct. However, when I set the MicrophoneMode to voiceIsolation, the channel count is incorrect: aggregationDevice!.channels(scope: .input) =>> 4 aggregationDevice!.channels(scope: .output) =>> 12 Below is the code for creating the aggregate device： func createAggregateDevice(mainDevice: AudioDevice, secondDevice: AudioDevice?, named name: String, uid: String) -> AudioDevice? { guard let mainDeviceUID = mainDevice.uid else { return nil } var deviceList: [[String: Any]] = [ [ kAudioSubDeviceUIDKey: mainDeviceUID, kAudioSubDeviceDriftCompensationKey:1 ] ] // make sure same device isn't added twice if let secondDeviceUID = secondDevice?.uid, secondDeviceUID != mainDeviceUID { deviceList.append([ kAudioSubDeviceUIDKey: secondDeviceUID, kAudioSubDeviceDriftCompensationKey:1, kAudioSubDeviceInputChannelsKey:8 ]) } let desc: [String: Any] = [ kAudioAggregateDeviceNameKey: name, kAudioAggregateDeviceUIDKey: uid, kAudioAggregateDeviceSubDeviceListKey: deviceList, kAudioAggregateDeviceMainSubDeviceKey: mainDeviceUID, kAudioAggregateDeviceIsPrivateKey:false, ] var deviceID: AudioDeviceID = 0 let error = AudioHardwareCreateAggregateDevice(desc as CFDictionary, &deviceID) guard error == noErr else { return nil } return AudioDevice.lookup(by: deviceID) } I hope someone can tell me the reason Thank you！

Dear Sir, I have some questions of IC firmware development of Find My. Any rule request that item must include dual bank feature in IC? I am using Nordic SDK_Connect SDK, Apple has own SDK? If yes, can I download it to use? In Find-My, Apple has service UUID in bluetooth IC? Thank you. Best regards, Sam Ng