Hi everyone, I am developing a .NET MAUI Mac Catalyst app (sandboxed) that communicates with a custom vendor-specific HID USB device. Within the Catalyst app, I am using a native iOS library (built with Objective-C and IOKit) and calling into it via P/Invoke from C#. The HID communication layer relies on IOHIDManager and IOUSBInterface APIs. The device is correctly detected and opened using IOHIDManager APIs. However, IOHIDDeviceRegisterInputReportCallback never triggers — I don’t receive any input reports. To investigate, I also tried using low-level IOKit USB APIs via P/Invoke from my Catalyst app, calling into a native iOS library. When attempting to open the USB interface using IOUSBInterfaceOpen() or IOUSBInterfaceOpenSeize(), both calls fail with: kIOReturnNotPermitted (0xe00002e2). — indicating an access denied error, even though the device enumerates and opens successfully. Interestingly, when I call IOHIDDeviceSetReport(), it returns status = 0, meaning I can successfully send feature reports to the device. Only input reports (via the InputReportCallback) fail to arrive. I’ve confirmed this is not a device issue — the same hardware and protocol work perfectly under Windows using the HIDSharp library, where both input and output reports function correctly. What I’ve verified •Disabling sandboxing doesn’t change the behavior. •The device uses a vendor-specific usage page (not a standard HID like keyboard/mouse). •Enumeration, open, and SetReport all succeed — only reading input reports fails. •Tried polling queues, in queues Input_Misc element failed to add to the queues. •Tried getting report in a loop but no use.

Problem Description: Since Our USB hubs are capable of sending Vendor Defined Messages (VDMs) over a USB Type-C cable connection, they can programmatically place iOS, iPadOS, and macOS devices into DFU mode—without requiring any physical button interaction. Recently, we identified an issue when invoking DFU mode on an iPhone 15 using this method. Upon entering DFU mode, the device enumerates with USB Product ID 0x1881 (“Debug USB” – KIS interface). At that point, the deviceinterfaced daemon (launched by launchd) immediately detects the device and claims exclusive access to the USB interface. As a result, when our API Service attempts to communicate with the device through standard IOKit methods, it fails with the following error: 0xe00002c5 ((iokit/common) exclusive access and device already open) This prevents our libraries from reading the iBoot string (USB serial number string) that Apple devices normally expose in standard or recovery modes—information that includes ECID, CPID, CPRV, CPFM, BDID, and SCEP. This creates a significant barrier, as our API service becomes unable to perform subsequent device restoration operations as we missed the critical information. Request for Guidance: I’ve included the following context for your analysis and review. Using the launchctl unload command can temporarily stop it; however, I’d like to know if there’s an API-level mechanism to programmatically prevent deviceinterfaced from claiming access from within our API Service. Could you please advise on the following points? 1.  Managing deviceinterfaced Access • What is the proper way to stop or prevent deviceinterfaced from claiming exclusive access in this case, so that the API Service can read device information and starts restoring the device from that point? • Is there a recommended method or entitlement that allows third-party services to communicate with Apple devices while they are in Debug USB (KIS) mode? 2.  Guidelines and API Access • Are there any Apple-supported APIs or developer guidelines that would permit controlled access to the iBoot interface without conflicting with deviceinterfaced?

I have an iOS/iPadOS app and 'm trying to communicate with usb smart card reader using CryptoTokenKit on all platforms (ios/ipados/macos). Minimal Repro Code import CryptoTokenKit import SwiftUI struct ContentView: View { @State var status = "" var body: some View { VStack { Text("Status: \(status)") } .padding() .onAppear { let manager = TKSmartCardSlotManager.default if manager != nil { status = "Initialized" } else { status = "Unsupported" } } } } And my entitlement file has only one key: com.apple.security.smartcard = YES Behavior • iPadOS (on device): status = "Initialized" ✅ • macOS (native macOS app, with the required CryptoTokenKit entitlement): status = "Initialized" ✅ • macOS (Designed for iPad, regardless of CryptoTokenKit entitlement): status = "Unsupported" → TKSmartCardSlotManager.default is nil ❌ Expectation Given that the same iPadOS build initializes TKSmartCardSlotManager, I expected the iPad app running in Designed for iPad mode on Apple silicon Mac to behave the same (or to have a documented limitation). Questions Is CryptoTokenKit (and specifically TKSmartCardSlotManager) supported for iPad apps running on Mac in Designed for iPad mode? If support exists, what entitlements / capabilities are required for USB smart-card access in this configuration? If not supported, is Mac Catalyst the correct/only path on macOS to access USB smart-card readers via CryptoTokenKit? Are there recommended alternatives for iPad apps on Mac (Designed for iPad) to communicate with USB smart-card readers (e.g., ExternalAccessory, DriverKit, etc.), or is this scenario intentionally unsupported? Thanks!

Hi, We are facing the issue of commissioning our Matter device to google home through iOS device will be 100% failed. Here is our test summary regarding the issue: TestCase1 [OK]: Commissioning our Matter 1.4.0 device to Google Nest Hub 2 by Android device (see log DoorWindow_2.0.1_Google_Success.txt ) TestCase2 [NG]: Commissioning Matter 1.4.0 device to Google Nest Hub 2 by iPhone13 or iPhone16 (see log DoorWindow_2.0.1_Google_by_iOS_NG.txt ) TestCase3 [OK]: Commissioning our Matter 1.3.0 device to Google Nest Hub 2 by iPhone13 In TestCase2, we noticed that device was first commissioned to iOS(Apple keychain) then iOS opened a commissioning window again to commission it in Google’s ecosystem, and the device was failed at above step 2, so we also tried: Commissioning the device to Apple Home works as expected, next share the device to Google Home app on iOS, this also fails. Commissioning the device to Apple Home works as expected, next share the device to Google Home app on Android, this works as expected and device pops up in Google home of iOS as well. Could you help check what's the issue of TestCase2? Append the environment of our testing: NestHub 2 version Google Home app version

Hello. I am attempting to wrap the C library libnfc as a Swift library. This is not for use on macOS - it's mainly for use on Linux (Raspberry Pi). I have a USB reader and my code appears to work so far, however the code/test/debug cycle is suboptimal if I'm running the code on the Pi. As I use a Mac for day-to-day coding, I'd prefer to use Xcode and my Mac for development. MacOS appears to capture the NFC hardware for its own frameworks and attempting to open a connection to the USB device gives a Unable to claim USB interface (Permission denied) error. ioreg shows that the hardware is claimed by an Apple framework: "UsbExclusiveOwner" = "pid 10946, com.apple.ifdbun" Is there a way to temporarily over-ride that system and use the hardware myself? I've tried Googling but most of the replies are out of date and Claude's advice launchctl unload /System/Library/LaunchDaemons/com.apple.ifdreader.plist doesn't appear to work... I'm wary of disabling SIP - is there a simple way to have access to the hardware myself? Thanks.

Which HomeKit API serves for the Home application scene (HMActionSet)-related functionality “Remove from Home View” and “Add to Home View”? There must be a public API for that, for at the very least one 3rd party application shows/hides scenes appropriately as they are set up in Home; nevertheless, whatever I try, I can't find the API. Thanks!

With the same firmware, OTA testing on the DCL test network was successful in September 2025, and the Home app was able to deliver software update notifications. Since the beginning of 2026, however, the Home app no longer delivers software update notifications. This is bug number: FB21922369

I have a BLE device which my app connects to and can detect button presses. On a button press, I want my app to start recording using the AudioRecordingIntent. But my app doesn't work and throws a background error. Is there any reliable way I can get the app to start recording audio in the background?

目前这个findmy 设备是已经通过MFI认证，不过后续想的在”Find My “应用上像 AirTag 一样支持UWB测距功能。 寻找了相关资料，在这篇文章《Nearby-Interaction-Accessory-Protocol-Specification-Release-R4》中找到了UWB的相关功能，但是需要我们自己开发第三方应用。 所以需要怎么做才可以做到像airtag 一样在“Find My”应用上显示距离和方向

This is a regression since iOS 13. Is there no-one at Apple interested in fixing this? FB9856371

I have a question about Apple certification. We are planning card reader via HID(human interface device) for iPad that support USB-C. iPad will receive data as HID protocol. In this case do I have to get certificate(for example MFi) like Apple USB accessory?

Hello. I am building a BLE device that is Activity Fitness based and would like a "System Level" BLE connection on WatchOS using an ESP32 (I have built a test of this on the firmware side). Meaning I do not want my iOS app to pass the BLE connection to the WatchOS app. It seems like these App Level connections do not get as many background updates as a System Level connection, and also requires the WatchOS app to be launched to connect to the BLE device The System Level BLE connection (WatchOS Settings > BLE > Health Devices) allows for auto connection in the background, and gets more reliable background communication between the BLE device and the Apple Watch On the Apple MFi Page it only mentions iOS: From Apple MFi Page: :: Who does NOT need to join - Developers and manufacturers of accessories that connect to an Apple device using only Bluetooth Low Energy, Core Bluetooth, or standard Bluetooth profiles supported by iOS Does this apply to WatchOS as well? So, if I am making an BLE device that is Activity Based, and has one of the allowable Health Device UUIDs, is the BLE System Connection allowed using any BLE chip? Including say an ESP32 I have built a test BLE firmware that is a Health Device UUID, and the WatchOS sees it as a health device Is this fine then? No need for MFi application and also no need to worry about which BLE chip is used? thanks

HomePod Mini running 18.6 build 22M5054/b - will not update to HomePod OS26 have tried un-enrollment, reset, removal, etc - no dice - anyone else seeing this ? Any known work arounds ? iPad is running iPadOS 26 Relase 2 - 23A5276f

I am writing to report an issue I’m facing after updating my iPhone 11 Pro Max to iOS 26. I have been using the Hollyland Lark M2 external microphone via the Lightning port, and it was working perfectly before the update. However, after upgrading to iOS 26, the iPhone no longer detects it correctly. The device now recognizes the mic as a pair of wired earphones, and it fails to capture any audio input. The microphone itself works flawlessly on other devices, so this appears to be an iOS-specific issue. Could you please confirm: • Whether this is a known issue in iOS 26? • If there are any settings or steps I can take to resolve this? • Whether a fix is planned in an upcoming iOS patch? I would appreciate any guidance or solution you can provide. Thank you for your support.

Macbook pro M4 - will not accept any power adapter after beta update iPhone 16 pro - same exact problem Devices are dead Tried multiple chargers - Watch and IPad appear to be taking a charge for now..

I have bought iphone 16 pro max on October 28, ( 9 months ago) and rarely dropped by battery health below 20%. I also set limit to 80% so I can preserve my Battery Health. I am not a multitasking user. I used fan to keep the phone cool during charging. But today I update to iOS26 public beta, It dropped to 99% at 88 Cycle which is quite low cycle. Many other user are getting their battery health dropped to 99% after 120, 130+ cycle with daily usage. Why mine got dropped after updating. I am quite unhappy with it, and iOS 26 is so jittery in my phone

Hello, We are testing Wallet passes with iBeacons in iOS 26 Beta. In earlier iOS releases, when a device was in proximity to a registered beacon, the corresponding pass would surface automatically. In iOS 26 Beta, this behavior no longer occurs, even if the pass is already present in Wallet. I have not found documentation of this change in the iOS 26 release notes. Could you please confirm whether this is expected in iOS 26, or if it may be a Beta-specific issue? Any pointers to updated documentation would be appreciated. Thank you.

Hello, The Apple Pencil Pro brought with it the UICanvasFeedbackGenerator API, which lets us trigger haptic feedback on discrete events initiated by the pencil. That works fine. My question then: is it possible / are we "allowed" to trigger haptic feedback on events that weren't initiated by the pencil? For example, say the user is using a left hand finger to drag a slider, while holding the pencil in their right hand-- would it be possible to make the pencil vibrate to indicate the dragged slider knob reached a certain point? Or is the rule that vibration is only possible/allowed when the pencil itself generated a touch? Thanks!

Hello, I am a developer planning to build an application using Apple's new SpeechTranscriber technology. I am facing an issue where SpeechTranscriber is not available on my iPad Pro (11-inch, 2nd generation, model number: MXDC2J/A), even though I have updated it to iPadOS 26. I was under the impression that SpeechTranscriber would be available on any device running iPadOS 26. Could you please clarify if this is incorrect? Furthermore, I am planning to purchase a new iPad with an A16 chip for the development and deployment of this application. Can you confirm if SpeechTranscriber will be fully functional on an iPad equipped with the A16 chip? Thank you for your assistance.

We have recently encountered an App crash, as shown in the picture. We call this function as: let session = AVAudioSession.sharedInstance() guard session.currentRoute.outputs.isEmpty == false else { return false } The TestFlight caught this issue, and the iOS device information is attached: Do you have any suggestions to avoid this crash?