I created a custom class that inherits from IOUserSCSIPeripheralDeviceType00 in the DriverKit SCSIPeripheralsDriverKit framework. When I attempted to send a vendor-specific command to a USB storage device using the UserSendCDB function of this class instance, the function returned the error: kIOReturnNotPrivileged (iokit_common_err(0x2c1)) // privilege violation However, when using UserSendCDB in the same way to issue standard SCSI commands such as INQUIRY or Test Unit Ready, no error occurred and the returned sense data was valid. Why is UserSendCDB able to send standard SCSI commands successfully, but vendor-specific commands return kIOReturnNotPrivileged? Is there any required entitlement, DriverKit capability, or implementation detail needed to allow vendor-specific CDBs? Below are the entitlements of my DriverKit extension: <dict> <key>com.apple.developer.driverkit.transport.usb</key> <array> <dict> <key>idVendor</key> <integer>[number of vendorid]</integer> </dict> </array> <key>com.apple.developer.driverkit</key> <true/> <key>com.apple.developer.driverkit.allow-any-userclient-access</key> <true/> <key>com.apple.developer.driverkit.allow-third-party-userclients</key> <true/> <key>com.apple.developer.driverkit.communicates-with-drivers</key> <true/> <key>com.apple.developer.driverkit.family.scsicontroller</key> <true/> </dict> If there is any additional configuration or requirement to enable vendor-specific SCSI commands, I would appreciate your guidance. Environment: macOS15.6 M2 MacBook Pro

Hello I'm testing an 'age range sharing' feature using the AgeRangeService API in an app we service. I approved 'Age Sharing' during testing. (For your information, my account is an adult account.) For repeat testing, I would like to delete the our app from 'Apps that requested user age information' or cancel the sharing status. However, there doesn't seem to be such a feature. Is there a way I can't find, or is this a feature that Apple doesn't offer?

We are developing a DriverKit driver on Apple M1. We use the following code to prepare DMA buffer: IODMACommandSpecification dmaSpecification; bzero(&dmaSpecification, sizeof(dmaSpecification)); dmaSpecification.options = kIODMACommandSpecificationNoOptions; dmaSpecification.maxAddressBits = p_dma_mgr->maxAddressBits; kret = IODMACommand::Create(p_dma_mgr->device, kIODMACommandCreateNoOptions, &dmaSpecification, &impl->dma_cmd ); if (kret != kIOReturnSuccess) { os_log(OS_LOG_DEFAULT, "Error: IODMACommand::Create failed! ret=0x%x\n", kret); impl->user_mem.reset(); IOFree(impl, sizeof(*impl)); return ret; } uint64_t flags = 0; uint32_t segmentsCount = 32; IOAddressSegment segments[32]; kret = impl->dma_cmd->PrepareForDMA(kIODMACommandPrepareForDMANoOptions, impl->user_mem.get(), 0, 0, // 0 for entire memory &flags, &segmentsCount, segments ); if (kret != kIOReturnSuccess) { OSSafeReleaseNULL(impl->dma_cmd); impl->user_mem.reset(); IOFree(impl, sizeof(*impl)); os_log(OS_LOG_DEFAULT, "Error: PrepareForDMA failed! ret=0x%x\n", kret); return kret; } I allocated several 8K BGRA video frames, each with a size of 141557760 bytes, and prepared the DMA according to the method mentioned above. The process was successful when the number of frames was 15 or fewer. However, issues arose when allocating 16 frames: Error: PrepareForDMA failed! ret=0xe00002bd By calculating, I found that the total size of 16 video frames exceeds 2GB. Is there such a limitation in DriverKit that the total DMA size cannot exceed 2GB? Are there any methods that would allow me to bypass this restriction so I can use more video frame buffers?

Dear Apple CS, I’m working with NFC ISO15693 tags using NFCTagReaderSession / NFCISO15693Tag, and I’d like to read these tags in the background if possible. Is there any way to read this tag type without triggering the system NFC popup that iOS normally shows? Please note it will not be a public app, the app is meant for internal use for our employees only. is there an option to submit a special request for this use case? Thank you in advance!

Kevin's Guide to DEXT Signing The question of "How do I sign a DEXT" comes up a lot, so this post is my attempt to describe both what the issues are and the best current solutions are. So... The Problems: When DEXTs were originally introduced, the recommended development signing process required disabling SIP and local signing. There is a newer, much simpler process that's built on Xcode's integrated code-signing support; however, that newer process has not yet been integrated into the documentation library. In addition, while the older flow still works, many of the details it describes are no longer correct due to changes to Xcode and the developer portal. DriverKit's use of individually customized entitlements is different than the other entitlements on our platform, and Xcode's support for it is somewhat incomplete and buggy. The situation has improved considerably over time, particularly from Xcode 15 and Xcode 16, but there are still issues that are not fully resolved. To address #1, we introduced "development" entitlement variants of all DriverKit entitlements. These entitlement variants are ONLY available in development-signed builds, but they're available on all paid developer accounts without any special approval. They also allow a DEXT to match against any hardware, greatly simplifying working with development or prototype hardware which may not match the configuration of a final product. Unfortunately, this also means that DEXT developers will always have at least two entitlement variants (the public development variant and the "private" approved entitlement), which is what then causes the problem I mentioned in #2. The Automatic Solution: If you're using Xcode 16 or above, then Xcode's Automatic code sign support will work all DEXT Families, with the exception of distribution signing the PCI and USB Families. For completeness, here is how that Automatic flow should work: Change the code signing configuration to "Automatic". Add the capability using Xcode. (USB & PCI) Edit your Entitlement.plist to include the correct "Development Only" configuration: USB Development Only Configuration: <key>com.apple.developer.driverkit.transport.usb</key> <array> <dict> <key>idVendor</key> <string>*</string> </dict> </array> PCI Development Only Configuration: <key>com.apple.developer.driverkit.transport.pci</key> <array> <dict> <key>IOPCIPrimaryMatch</key> <string>0xFFFFFFFF&amp;0x00000000</string> </dict> </array> If you've been approved for one of these entitlements, the one oddity you'll see is that adding your approved capability will add both the approved AND the development variant, while deleting either will delete both. This is a visual side effect of #2 above; however, aside from the exception described below, it can be ignored. Similarly, you can sign distribution builds by creating a build archive and then exporting the build using the standard Xcode flow. Debugging Automatic Code-signing In a new project, the flow I describe above should just work; however, if you're converting an existing project, you may get code signing errors, generally complaining about how the provisioning profile configuration doesn't match. In most cases, this happens because Xcode is choosing to reuse a previously downloaded profile with an older configuration instead of generating a new configuration which would then include the configuration changes you made. Currently, you can find these profile files in: ~/Library/Developer/Xcode/UserData/Provisioning Profiles ...which can make it easier to find and delete the specific profile (if you choose). However, one recommendation I'd have here is to not treat the contents of that folder as "precious" or special. What automatic code signing actually does is generate provisioning profiles "on demand", so if you delete an automatic profile... Xcode will just generate it again at the next build. Manually generating profiles is more cumbersome, but the solution there is to preserve them as a separate resource, probably as part of your project data, NOT to just "lose" them in the folder here. If they get deleted from Xcode's store, then you can just copy them back in from your own store (or using Xcode, which can manually download profiles as well). The advantage of this approach is that when profiles "pile up" over time (which they tend to do), you can just delete[1] all of them then let Xcode regenerate the ones you're actually trying to investigate. In terms of looking at their contents, TN3125: Inside Code Signing: Provisioning Profiles has the details of how to see exactly what's there. [1] Moving them somewhere else works too, but could indicate a fear of commitment. __ Kevin Elliott DTS Engineer, CoreOS/Hardware

Hi! Following this ticket: https://developer.apple.com/forums/thread/808764?page=1#868010022 Is there any way to use the hardware RFID reading capabilities of an iPhone to read ISO15693 RF tags silently, and without a UI pop-up? Perhaps using other native iOS libraries than the NFC library? If not, is there a way for a business to request this feature be allowed in internally used apps only?

Have a 2019 Ford Edge w/ Sync 3.4, wired carplay. Worked fine w/ iPhone 16 Pro on iOS 18. Upgraded to iPhone 17 Pro, came w/ iOS 26, carplay hasn't worked since. I've kept trying throughout new iOS 26 releases, lately with iOS 26.3 Public Beta 1, still not working. Have a long running issue with updates and system diagnostics as I've tried over the last few months: FB20739050 There is also a Apple support community thread with issues like this (and a ton of others) - my first post there was https://discussions.apple.com/thread/256138283?answerId=261613103022&sortBy=oldest_first#261613103022 I'm hoping here in the developer forums someone can maybe take a look at the feedback item and various system diagnostics to pin-point the issue. I'm a little concerned it's still not fixed this far into the follow-up point releases of iOS 26. Appreciate any help, thanks! --Chuck

Why hasn't the watchOS app updated immediately after the iPhone app was updated? It remains stuck in "Installing" status on the Apple Watch.

Hello! I have app (macos and iPadOS platforms) with empbedded DEXT. The DEXT executable runs fine on both platforms (ver 26.2). Trying to execute from iPad App code: let sysExtWs = OSSystemExtensionsWorkspace.shared let sysExts = try sysExtWs.systemExtensions(forApplicationWithBundleID: appBudleId) but always getting OSSystemExtensionError.Code.missingEntitlement error. Which entitlement am I missing? Thank You!

I am developing a macOS virtual audio device using an Audio Server Plug-In (HAL). I want the virtual device to be visible to all applications only when my main app is running, and completely hidden from all apps when the app is closed. The goal is to dynamically control device visibility based on app state without reinstalling the driver.What is the recommended way for the app to notify the HAL plug-in about its running or closed state ? Any guidance on best-practice architecture for this scenario would be appreciated.

在Developer app中现在注册按钮时置灰等,无法点击,我发送的联系邮件也没有得到回应,有什么办法解决吗

Hello! We develop a SAS driver and a service application for DAS devices. When users in our application create a RAID array on the device: On the 1st step, our dext driver mounts a new volume. At this step DiskUtil automatically tries to mount it. As there is no file system on the new volume - the MacOS system popup appears "The disk you attached was not readable by the computer" On the 2nd step our application creates the file system on this new volume. So we do not need this MacOS system popup to appear (as it may frustrate our users). We found a way to disable the global auto mount but this solution also impacts on other devices (which is not good). Are there any other possibilities to prevent the popup "The disk you attached was not readable by the computer" from appearing?

1. 环境描述 (Environment) OS: macOS 26.2 Hardware: Apple Silicon (M1/M2/M3) DriverKit SDK: DriverKit 19.0 / 20.0 Arch: Universal (x86_64, arm64, arm64e) SIP Status: Enabled (Works perfectly when Disabled) 2. 问题现象 (Problem Description) 在开启 SIP 的环境下，USB 驱动扩展（Dext）能安装，但插入设备时无法连接设备（驱动的Start方法未被调用）。 驱动状态： MacBook-Pro ~ % systemextensionsctl list 1 extension(s) --- com.apple.system_extension.driver_extension (Go to 'System Settings > General > Login Items & Extensions > Driver Extensions' to modify these system extension(s)) enabled active teamID bundleID (version) name [state] * * JK9U78YRLU com.ronganchina.usbapp.MyUserUSBInterfaceDriver (1.3/4) com.ronganchina.usbapp.MyUserUSBInterfaceDriver [activated enabled] 关键日志证据 (Key Logs) KernelManagerd: Error Domain=NSPOSIXErrorDomain Code=8 "Exec format error" Syspolicyd: failed to fetch ... /_CodeSignature/CodeRequirements-1 error=-10 AppleSystemPolicy: ASP: Security policy would not allow process DriverKit Kernel: DK: MyUserUSBInterfaceDriver user server timeout dext的 embedded.provisionprofile 已包含： com.apple.developer.driverkit com.apple.developer.driverkit.transport.usb (idVendor: 11977)

This is my first driver and I have had the devil of a time trying to find any information to help me with this. I beg help with this, since I cannot find any tutorials that will get me over this problem. I am attempting to write a bridging driver for an older UPS that only communicates via RPC-over-USB rather than the HID Power Device class the OS requires. I have written the basic framework for the driver (details below) and am calling OSSystemExtensionRequest.submitRequest with a request object created by OSSystemExtensionRequest.activationRequest, but the didFailWithError callback is called with OSSystemExtensionErrorDomain of a value of 9, which appears to be a general failure to activate the driver. I can find no other information on how to address this issue, but I presume the issue is one of entitlements in either the entitlements file or Info.plist. I will have more code-based details below. For testing context, I am testing this on a 2021 iMac (M1) running Sequoia 15.7, and this iMac is on MDM, specifically Jamf. I have disabled SIP and set systemextensionsctl developer on, per the instructions here, and I have compiled and am attempting to debug the app using xcode 26.2. The driver itself targets DriverKit 25, as 26 does not appear to be available in xcode despite hints on google that it's out. For the software, I have a two-target structure in my xcode project, the main Manager app, which is a swift-ui app that both handles installation/activation of the driver and (if that finally manages to work) handles communication from the driver via its UserClient, and the driver which compiles as a dext. Both apps compile and use automated signing attached to our Apple Development team. I won't delve into the Manager app much, as it runs even though activation fails, except to include its entitlements file in case it proves relevant <dict> <key>com.apple.developer.driverkit.communicates-with-drivers</key> <true/> <key>com.apple.developer.system-extension.install</key> <true/> <key>com.apple.security.app-sandbox</key> <true/> <key>com.apple.security.files.user-selected.read-only</key> <true/> </dict> and the relevant activation code: func request(_ request: OSSystemExtensionRequest, didFailWithError error: any Error) { // handling the error, which is always code value 9 } func activateDriver() { let request = OSSystemExtensionRequest.activationRequest(forExtensionWithIdentifier: "com.mycompany.driver.bundle.identifier", queue: .main) request.delegate = self OSSystemExtensionManager.shared.submitRequest(request) //... } And finally the Manager app has the following capabilities requested for its matching identifier in our Apple Developer Account: DriverKit Communicates with Drivers System Extension On the Driver side, I have two major pieces, the main driver class MyDriver, and UserClient class, StatusUserClient. MyDriver derives from IDriverKit/IOService.iig but (in case this is somehow important) does not have the same name as the project/target name MyBatteryDriver. StatusUserClient derives from DriverKit/IOUserClient.iig. I have os_log(OS_LOG_DEFAULT, "trace messages") code in every method of both classes, including the initializers and Start implementations, and the log entries never seem to show up in Console, so I presume that means the OS never tried to load the driver. Unless I'm looking in the wrong place? Because I don't think the driver code is the current issue, I won't go into it unless it becomes necessary. As I mentioned above, I think this is a code signing / entitlements issue, but I don't know how to resolve it. In our Apple Developer account, the Driver's matching identifier has the following capabilities requested: DriverKit (development) DriverKit Allow Any UserClient (development) DriverKit Family HID Device (development) -- NOTE: this is planned for future use, but not yet implemented by my driver code. Could that be part of the problem? DriverKit Transport HID (development) DriverKit USB Transport (development) DriverKit USB Transport - VendorID -- submitted, no response from Apple yet HID Virtual Device -- submitted, no response from Apple. yet. This is vestigial from an early plan to build the bridge via shared memory funneling to a virtual HID device. I think I've found a way to do it with one Service, but... not sure yet. Still, that's a problem for tomorrow. Apparently I've gone over the 7000 character maximum so I will add my entitlements and info.plist contents in a reply.

Note: This document is specifically focused on what happens after a DEXT has passed its initial code-signing checks. Code-signing issues are dealt with in other posts. Preliminary Guidance: Using and understanding DriverKit basically requires understanding IOKit, something which isn't entirely clear in our documentation. The good news here is that IOKit actually does have fairly good "foundational" documentation in the documentation archive. Here are a few of the documents I'd take a look at: IOKit Fundamentals IOKit Device Driver Design Guidelines Accessing Hardware From Applications Special mention to QA1075: "Making sense of IOKit error codes",, which I happened to notice today and which documents the IOReturn error format (which is a bit weird on first review). Those documents do not cover the full DEXT loading process, but they are the foundation of how all of this actually works. Understanding the IOKitPersonalities Dictionary The first thing to understand here is that the "IOKitPersonalities" is called that because it is in fact a fully valid "IOKitPersonalities" dictionary. That is, what the system actually uses that dictionary "for" is: Perform a standard IOKit match and load cycle in the kernel. The final driver in the kernel then uses the DEXT-specific data to launch and run your DEXT process outside the kernel. So, working through the critical keys in that dictionary: "IOProviderClass"-> This is the in-kernel class that your in-kernel driver loads "on top" of. The IOKit documentation and naming convention uses the term "Nub", but the naming convention is not consistent enough that it applies to all cases. "IOClass"-> This is the in-kernel class that your driver loads on top of. This is where things can become a bit confused, as some families work by: Routing all activity through the provider reference so that the DEXT-specific class does not matter (PCIDriverKit). Having the DEXT subclass a specific subclass which corresponds to a specific kernel driver (SCSIPeripheralsDriverKit). This distinction is described in the documentation, but it's easy to overlook if you don't understand what's going on. However, compare PCIDriverKit: "When the system loads your custom PCI driver, it passes an IOPCIDevice object as the provider to your driver. Use that object to read and write the configuration and memory of your PCI hardware." Versus SCSIPeripheralsDriverKit: Develop your driver by subclassing IOUserSCSIPeripheralDeviceType00 or IOUserSCSIPeripheralDeviceType05, depending on whether your device works with SCSI Block Commands (SBC) or SCSI Multimedia Commands (SMC), respectively. In your subclass, override all methods the framework declares as pure virtual. The reason these differences exist actually comes from the relationship and interactions between the DEXT families. Case in point, PCIDriverKit doesn't require a specific subclass because it wants SCSIControllerDriverKit DEXTs to be able to directly load "above" it. Note that the common mistake many developers make is leaving "IOUserService" in place when they should have specified a family-specific subclass (case 2 above). This is an undocumented implementation detail, but if there is a mismatch between your DEXT driver ("IOUserSCSIPeripheralDeviceType00") and your kernel driver ("IOUserService"), you end up trying to call unimplemented kernel methods. When a method is "missing" like that, the codegen system ends up handling that by returning kIOReturnUnsupported. One special case here is the "IOUserResources" provider. This class is the DEXT equivalent of "IOResources" in the kernel. In both cases, these classes exist as an attachment point for objects which don't otherwise have a provider. It's specifically used by the sample "Communicating between a DriverKit extension and a client app" to allow that sample to load on all hardware but is not something the vast majority of DEXT will use. Following on from that point, most DEXT should NOT include "IOMatchCategory". Quoting IOKit fundamentals: "Important: Any driver that declares IOResources as the value of its IOProviderClass key must also include in its personality the IOMatchCategory key and a private match category value. This prevents the driver from matching exclusively on the IOResources nub and thereby preventing other drivers from matching on it. It also prevents the driver from having to compete with all other drivers that need to match on IOResources. The value of the IOMatchCategory property should be identical to the value of the driver's IOClass property, which is the driver’s class name in reverse-DNS notation with underbars instead of dots, such as com_MyCompany_driver_MyDriver." The critical point here is that including IOMatchCategory does this: "This prevents the driver from matching exclusively on the IOResources nub and thereby preventing other drivers from matching on it." The problem here is that this is actually the exceptional case. For a typical DEXT, including IOMatchCategory means that a system driver will load "beside" their DEXT, then open the provider blocking DEXT access and breaking the DEXT. DEXT Launching The key point here is that the entire process above is the standard IOKit loading process used by all KEXT. Once that process finishes, what actually happens next is the DEXT-specific part of this process: IOUserServerName-> This key is the bundle ID of your DEXT, which the system uses to find your DEXT target. IOUserClass-> This is the name of the class the system instantiates after launching your DEXT. Note that this directly mimics how IOKit loading works. Keep in mind that the second, DEXT-specific, half of this process is the first point your actual code becomes relevant. Any issue before that point will ONLY be visible through kernel logging or possibly the IORegistry. __ Kevin Elliott DTS Engineer, CoreOS/Hardware

I'm developing a DriverKit USB driver for iPadOS that needs to communicate with a vendor-class USB device (bInterfaceClass = 0xFF) as I need to communicate with a USB device using a custom protocol over IOUSBHostPipe for bulk transfers. Current Configuration: Info.plist: IOProviderClass = IOUSBHostDevice Device: bDeviceClass = 0, bInterfaceClass = 0xFF (vendor-specific) What Works: Driver matches and loads successfully Start_Impl() executes device->Open() succeeds device->SetConfiguration() succeeds The Problem: uintptr_t iterRef = 0; kern_return_t ret = device->CreateInterfaceIterator(&iterRef); Result: ret = kIOReturnSuccess (0x0), but iterRef = 0 (empty iterator) What I've Tried: Matching IOUSBHostInterface directly - Driver is loaded, but extension never executed Current approach (IOUSBHostDevice) - Driver extension loads and starts, but CreateInterfaceIterator returns empty Question: Does iPadOS allow third-party DriverKit extensions to access vendor-class (0xFF) USB devices? That is, iPadOS, is there a way for a third-party DriverKit extension to access IOUSBHostInterface objects for vendor-class (0xFF) USB devices?

MacOS(Apple Silicon) IOKit driver for FPGA DMA transmission, kernel panic. Hardware and software configuration: MAC mini M1 2020 16GB, macOS Ventura 13.0 or 13.7.8 FPGA device capability: 64-bit Complete description: We've developed a DMA driver for PCIe devices (FPGA) based on IOKit. The driver can start normally through kextload, and the bar mapping, DMA registers, etc. are all correct. I am testing DMA data transmission, but a kernel panic has occurred. The specific content of the panic is as follows: {"bug_type":"210","timestamp":"2026-01-28 14:35:30.00 +0800","os_version":"macOS 13.0 (22A380)","roots_installed":0,"incident_id":"61C9B820-8D1B-4E75-A4EB-10DC2558FA75"} { "build" : "macOS 13.0 (22A380)", "product" : "Macmini9,1", "socId" : "0x00008103", "kernel" : "Darwin Kernel Version 22.1.0: Sun Oct 9 20:14:30 PDT 2022; root:xnu-8792.41.9~2/RELEASE_ARM64_T8103", "incident" : "61C9B820-8D1B-4E75-A4EB-10DC2558FA75", "crashReporterKey" : "6435F6BD-4138-412A-5142-83DD7E5B4F61", "date" : "2026-01-28 14:35:30.16 +0800", "panicString" : "panic(cpu 0 caller 0xfffffe0026c78c2c): "apciec[pcic0-bridge]::handleInterrupt: Request address is greater than 32 bits linksts=0x99000001 pcielint=0x02220060 linkcdmsts=0x00000000 (ltssm 0x11=L0)\n" @AppleT8103PCIeCPort.cpp:1301\nDebugger message: panic\nMemory ID: 0x6\nOS release type: User\nOS version: 22A380\nKernel version: Darwin Kernel Version 22.1.0: Sun Oct 9 20:14:30 PDT 2022; root:xnu-8792.41.9~2/RELEASE_ARM64_T8103\nFileset Kernelcache UUID: C222B4132B9708E5E0E2E8B8C5896410\nKernel UUID: 0BFE6A5D-118B-3889-AE2B-D34A0117A062\nBoot session UUID: 61C9B820-8D1B-4E75-A4EB-10DC2558FA75\niBoot version: iBoot-8419.41.10\nsecure boot?: YES\nroots installed: 0\nPaniclog version: 14\nKernelCache slide: 0x000000001d1b4000\nKernelCache base: 0xfffffe00241b8000\nKernel slide: 0x000000001e3f8000\nKernel text base: 0xfffffe00253fc000\nKernel text exec slide: 0x000000001e4e0000\nKernel text exec base: 0xfffffe00254e4000\nmach_absolute_time: 0x907c3082\nEpoch Time: sec usec\n Boot : 0x6979adbb 0x00023a6a\n Sleep : 0x00000000 0x00000000\n Wake : 0x00000000 0x00000000\n Calendar: 0x6979ae1a 0x00064953\n\nZone info:\n Zone map: 0xfffffe1000834000 - 0xfffffe3000834000\n . VM : 0xfffffe1000834000 - 0xfffffe14cd500000\n . RO : 0xfffffe14cd500000 - 0xfffffe1666e98000\n . GEN0 : 0xfffffe1666e98000 - 0xfffffe1b33b64000\n . GEN1 : 0xfffffe1b33b64000 - 0xfffffe2000830000\n . GEN2 : 0xfffffe2000830000 - 0xfffffe24cd4fc000\n . GEN3 : 0xfffffe24cd4fc000 - 0xfffffe299a1c8000\n . DATA : 0xfffffe299a1c8000 - 0xfffffe3000834000\n Metadata: 0xfffffe3f4d1ac000 - 0xfffffe3f551ac000\n Bitmaps : 0xfffffe3f551ac000 - 0xfffffe3f5ac94000\n\nCORE 0 recently retired instr at 0xfffffe002569d7a0\nCORE 1 recently retired instr at 0xfffffe002569eea0\nCORE 2 recently retired instr at 0xfffffe002569eea0\nCORE 3 recently retired instr at 0xfffffe002569eea0\nCORE 4 recently retired instr at 0xfffffe002569eea0\nCORE 5 recently retired instr at 0xfffffe002569eea0\nCORE 6 recently retired instr at 0xfffffe002569eea0\nCORE 7 recently retired instr at 0xfffffe002569eea0\nTPIDRx_ELy = {1: 0xfffffe2000c23010 0: 0x0000000000000000 0ro: 0x0000000000000000 }\nCORE 0 PVH locks held: None\nCORE 1 PVH locks held: None\nCORE 2 PVH locks held: None\nCORE 3 PVH locks held: None\nCORE 4 PVH locks held: None\nCORE 5 PVH locks held: None\nCORE 6 PVH locks held: None\nCORE 7 PVH locks held: None\nCORE 0 is the one that panicked. Check the full backtrace for details.\nCORE 1: PC=0xfffffe00279db94c, LR=0xfffffe00260d5d9c, FP=0xfffffe8ffecaf850\nCORE 2: PC=0xfffffe0025be76b0, LR=0xfffffe0025be7628, FP=0xfffffe8fff08f5f0\nCORE 3: PC=0x00000001c7cacd78, LR=0x00000001c7cacd84, FP=0x000000016f485130\nCORE 4: PC=0xfffffe002557f55c, LR=0xfffffe002557f55c, FP=0xfffffe8ffe1dff00\nCORE 5: PC=0xfffffe002557f55c, LR=0xfffffe002557f55c, FP=0xfffffe8fff5eff00\nCORE 6: PC=0xfffffe002557f55c, LR=0xfffffe002557f55c, FP=0xfffffe8ffed8bf00\nCORE 7: PC=0xfffffe002557f55c, LR=0xfffffe002557f55c, FP=0xfffffe8fff11bf00\nCompressor Info: 0% of compressed pages limit (OK) and 0% of segments limit (OK) with 0 swapfiles and OK swap space\nPanicked task 0xfffffe1b33aad678: 0 pages, 470 threads: pid 0: kernel_task\nPanicked thread: 0xfffffe2000c23010, backtrace: 0xfffffe8fff6eb6a0, tid: 265\n\t\t ... Kernel Extensions in backtrace:\n com.apple.driver.AppleT8103PCIeC(1.0)[A595D104-026A-39E5-93AA-4C87CE8C14D2]@0xfffffe0026c619d0->0xfffffe0026c86c97\n dependency: com.apple.driver.AppleARMPlatform(1.0.2)[11A9713E-6739-3A4C-8571-2D8EAA062278]@0xfffffe0025f13ff0->0xfffffe0025f6255f\n dependency: com.apple.driver.AppleEmbeddedPCIE(1)[E71CBCCD-AEB8-3E7B-933D-4FED4241BF13]@0xfffffe002654e0b0->0xfffffe00265684c7\n dependency: com.apple.driver.ApplePIODMA(1)[A419BABC-A7A3-316D-A150-7C2C2D1F6D53]@0xfffffe00269a24b0->0xfffffe00269a6c3b\n dependency: com.apple.driver.IODARTFamily(1)[03997E20-8A3F-3412-A4E8-BD968A75A07D]@0xfffffe00275bcf50->0xfffffe00275d0a3f\n dependency: com.apple.iokit.IOPCIFamily(2.9)[EC78F47B-530B-3F87-854E-0A0A5FD9BBB2]@0xfffffe0027934350->0xfffffe002795f3d3\n dependency: com.apple.iokit.IOReportFamily(47)[843B39D3-146E-3992-B7C7-960148685DC8]@0xfffffe0027963010->0xfffffe0027965ffb\n dependency: com.apple.iokit.IOThunderboltFamily(9.3.3)[B22BC005-BB7B-32A3-99C0-39F3BDBD8E54]@0xfffffe0027a5e3f0->0xfffffe0027b9a1a3\n\nlast started kext at 1915345919: com.sobb.pcie-dma\t1.0.0d1 (addr 0xfffffe00240e47f0, size 9580)\nlast stopped kext at 1774866338: com.sobb.pcie-dma\t1.0.0d1 (addr 0xfffffe00240e47f0, size 9580)\nloaded It seems that the DMA request address initiated by FPGA exceeded 32 bits, which was intercepted by PCIe root port and resulted in a kernel panic.This is also the case on macOS (M2). I have tried the following code interface: IOBufferMemoryDescriptor： a. withCapacity(bufferSize, kIODirectionInOut, true)； b. inTaskWithPhysicalMask(kernel_task, kIODirectionInOut, bufferSize, 0x00000000FFFFFFFFULL)。 The physical addresses of the constructed descriptors are all >32 bits; IODMACommand： a. withSpecification(kIODMACommandOutputHost64, 64, 0, IODMACommand::kMapped, 0, 0)，gen64IOVMSegments() The allocated IOVM address must be>32 bits, which will generate a kernel panic when used later. b.withSpecification(kIODMACommandOutputHost32, 32, 0, IODMACommand::kMapped, 0, 0)，gen32IOVMSegments() The allocation of IOVM failed with error code kIOReturnenMessageTooLarge. So after the above attempts, the analysis shows that the strategy of Dart+PCIe root port on macOS (Apple Silicon) is causing the failure of 64 bit DMA address transfer. I have two questions: a. Does Dart in macOS (Apple Silicon) definitely not allocate <=32-bit IOVM addresses? b. Is there any other way to achieve DMA transfer for FGPA devices on macOS (Apple Silicon)? Thanks！

Dear Support Team, ​I am writing to seek technical assistance regarding a persistent issue with Dolby Vision exporting in DaVinci Resolve 20 on my iPad Pro 12.9-inch (2021, M1 chip) running iPadOS 26.0.1. ​The Issue: Despite correctly configuring the project for a Dolby Vision workflow and successfully completing the dynamic metadata analysis, the "Dolby Vision Profile" dropdown menu (and related embedding options) is completely missing from the Advanced Settings in the Deliver page. ​My Current Configuration & Steps Taken: ​Software Version: DaVinci Resolve Studio 20 (Studio features like Dolby Vision analysis are active and functional). ​Project Settings: Color Science: DaVinci YRGB Color Managed. ​Dolby Vision: Enabled (Version 4.0) with Mastering Display set to 1000 nits. ​Output Color Space: Rec.2100 ST2084. ​Color Page: Dynamic metadata analysis has been performed, and "Trim" controls are functional. ​Export Settings: ​Format: QuickTime / MP4. ​Codec: H.265 (HEVC). ​Encoding Profile: Main 10. ​The Problem: Under "Advanced Settings," there is no option to select a Dolby Vision Profile (e.g., Profile 8.4) or to "Embed Dolby Vision Metadata." ​Potential Variables: ​System Version: I am currently running iPadOS 26. ​Apple ID: My iPad is currently not logged into an Apple ID. I suspect this might be preventing the app from accessing certain system-level AVFoundation frameworks or Dolby DRM/licensing certificates required for metadata embedding. ​Could you please clarify if the "Dolby Vision Profile" option is dependent on a signed-in Apple ID for hardware-level encoding authorization, or if this is a known compatibility issue with the current iPadOS 26 build? ​I look forward to your guidance on how to resolve this. ​Best regards, INSOFT_Fred

When printing image/photo files via AirPrint, selected finishing options (e.g., Punch) are not applied unless a preset is chosen. reproduction steps: Select an image on iOS Tap Print → choose printer/server Set Finishing Options → Punch Print Observed: Finishing options not applied IPP trace shows no finisher attributes in the request working scenario: Select any Preset (e.g., Color) before printing Finishing options are then included in IPP and applied Note: Issue does not occur when printing PDFs from iOS; finisher attributes are sent correctly. Is this expected AirPrint behavior for image jobs, or could this be a bug in how iOS constructs the IPP request for photos?

Since macOS 26.4 Beta 1, virtual HID devices created via DriverKit can no longer intercept key events from the built-in MacBook keyboard. External keyboards still work. This is confirmed and tracked here: https://github.com/pqrs-org/Karabiner-Elements/issues/4402 One possible lead (from LLM-assisted analysis of Apple's open-source IOHIDFamily code and cross-referencing community reports): macOS 26.4 Beta may have introduced or modified a security policy referred to as com.apple.iohid.protectedDeviceAccess, which could block IOHIDDeviceOpen for the Apple Internal Keyboard connected via SPI transport (AppleHIDTransportHIDDevice). This appears related to a "GamePolicy" check in IOHIDDeviceClass.m that gates whether processes can open HID devices. This has not been independently verified and may or may not be the root cause. This has far-reaching consequences. Karabiner-Elements alone has over 21,000 GitHub stars and is used by hundreds of thousands of macOS users for keyboard customization, accessibility workflows, ergonomic setups, and multilingual input. This change completely breaks its core functionality on any MacBook. Beyond Karabiner, this affects every developer building keyboard remapping, input customization, or accessibility tooling via DriverKit virtual HID devices — including commercial applications currently in development. I'd argue that the power and flexibility of keyboard customization on macOS is a genuine competitive advantage for the platform. Developers and power users choose Macs partly because tools like this exist. Restricting this capability would be detrimental to the ecosystem and to Apple's appeal among professional users. I'd like to understand: is this an intentional security change or a regression? If intentional, is there a migration path?