Bluetooth Channel Sounding on iOS 27 Beta — CS Procedures Execute but Distance Always Returns 0

Question

Created 1w

Replies 3

Boosts 0

Participants 3

I'm trying to get Apple's new Bluetooth Channel Sounding distance measurement working between an iPhone running iOS 27 Beta and a Nordic nRF54L15-based board.

The CS procedures appear to execute successfully over the air (Mode 0 + Mode 2 with Inline PCT), but the iOS sample app consistently returns 0 distance readings and occasionally throws Channel Sounding configuration failed.

What specific validation does iOS 27 apply to CS results before surfacing them ?

Are there known compatibility requirements for Nordic nRF54L15 with iOS Channel Sounding? (Nordic has indicated they're working on official support but have no timeline)

Is there a publicly available hardware and/or firmware platform already available we can use to test?

PacketLogger log

nRF54L15 log

Answer 1

Engineer OP

Apple

1w

This issue is known. Please continue testing with future beta seeds, and if the issue is not resolved, please file bug reports.

We don't as of yet have any recommendations for compatible hardware. I will update this thread if that info becomes available.

Answer 2

Engineer OP

Apple

4d

@jmarcelino If you can test it again with Beta 2 and report your results here, it would be of great help.

Answer 3

dinesharjaninordic OP

3d

Can confirm it now works. Tested with Nordic nRF54L15's ipt_reflector sample, modified to add RAS (Ranging Service) in Advertisement Data + Enabling Bonding.

Can you confirm Bonding is required for Channel Sounding to work? It was tricky on my end to figure that one out.

Thanks for addressing the issue so quickly.